DPDK patches and discussions
 help / color / mirror / Atom feed
From: Santosh Shukla <santosh.shukla@caviumnetworks.com>
To: dev@dpdk.org
Cc: john.mcnamara@intel.com, thomas@monjalon.net,
	jerin.jacob@caviumnetworks.com,
	Santosh Shukla <santosh.shukla@caviumnetworks.com>
Subject: [dpdk-dev] [PATCH v5 1/3] doc: add platform guide
Date: Tue,  7 Nov 2017 12:29:32 +0530	[thread overview]
Message-ID: <1510037974-1511-2-git-send-email-santosh.shukla@caviumnetworks.com> (raw)
In-Reply-To: <1510037974-1511-1-git-send-email-santosh.shukla@caviumnetworks.com>

This commit adds a section to the docs listing the platform
guide for the PMDs.

It then adds the octeontx platform guide to the listed platform
devices.

Patch also removes platform specific duplicate setup information from
eventdev/octeontx.rst, nics/octeontx.rst and update to
plaform/octeontx.rst.

Cc: John McNamara <john.mcnamara@intel.com>

Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
---
v4 --> v5:
* Replaced `Ref:` with `Sec :doc:` as per John review comment.
* * Renamed Feature to Features (john).
* * Replaced Section from `Platform Device Driver` to
`Platform Specific guide` (john).
* s/Intel Corporation / Cavium Inc (Jerin)

 doc/guides/eventdevs/octeontx.rst | 28 +-------------
 doc/guides/index.rst              |  1 +
 doc/guides/nics/octeontx.rst      | 29 +--------------
 doc/guides/platform/index.rst     | 39 ++++++++++++++++++++
 doc/guides/platform/octeontx.rst  | 77 +++++++++++++++++++++++++++++++++++++++
 5 files changed, 119 insertions(+), 55 deletions(-)
 create mode 100644 doc/guides/platform/index.rst
 create mode 100644 doc/guides/platform/octeontx.rst

diff --git a/doc/guides/eventdevs/octeontx.rst b/doc/guides/eventdevs/octeontx.rst
index 7e601a0..cef004a 100644
--- a/doc/guides/eventdevs/octeontx.rst
+++ b/doc/guides/eventdevs/octeontx.rst
@@ -63,33 +63,7 @@ Supported OCTEONTX SoCs
 Prerequisites
 -------------
 
-There are three main pre-perquisites for executing SSOVF PMD on a OCTEONTX
-compatible board:
-
-1. **OCTEONTX Linux kernel PF driver for Network acceleration HW blocks**
-
-   The OCTEONTX Linux kernel drivers (including the required PF driver for the
-   SSOVF) are available on Github at `octeontx-kmod <https://github.com/caviumnetworks/octeontx-kmod>`_
-   along with build, install and dpdk usage instructions.
-
-2. **ARM64 Tool Chain**
-
-   For example, the *aarch64* Linaro Toolchain, which can be obtained from
-   `here <https://releases.linaro.org/components/toolchain/binaries/4.9-2017.01/aarch64-linux-gnu>`_.
-
-3. **Rootfile system**
-
-   Any *aarch64* supporting filesystem can be used. For example,
-   Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained
-   from `<http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_.
-
-   As an alternative method, SSOVF PMD can also be executed using images provided
-   as part of SDK from Cavium. The SDK includes all the above prerequisites necessary
-   to bring up a OCTEONTX board.
-
-   SDK and related information can be obtained from: `Cavium support site <https://support.cavium.com/>`_.
-
-- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
+See :doc: `../platform/octeontx` for setup information.
 
 Pre-Installation Configuration
 ------------------------------
diff --git a/doc/guides/index.rst b/doc/guides/index.rst
index 5b6eb7e..91a7ebf 100644
--- a/doc/guides/index.rst
+++ b/doc/guides/index.rst
@@ -44,6 +44,7 @@ DPDK documentation
    nics/index
    cryptodevs/index
    eventdevs/index
+   platform/index
    contributing/index
    rel_notes/index
    faq/index
diff --git a/doc/guides/nics/octeontx.rst b/doc/guides/nics/octeontx.rst
index a6631cd..e4f8a4c 100644
--- a/doc/guides/nics/octeontx.rst
+++ b/doc/guides/nics/octeontx.rst
@@ -71,34 +71,7 @@ The features supported by the device and not yet supported by this PMD include:
 Prerequisites
 -------------
 
-There are three main pre-perquisites for executing OCTEONTX PMD on a OCTEONTX
-compatible board:
-
-1. **OCTEONTX Linux kernel PF driver for Network acceleration HW blocks**
-
-   The OCTEONTX Linux kernel drivers (including the required PF driver for the
-   all network acceleration blocks) are available on GitHub at
-   `octeontx-kmod <https://github.com/caviumnetworks/octeontx-kmod>`_
-   along with build, install and dpdk usage instructions.
-
-2. **ARM64 Tool Chain**
-
-   For example, the *aarch64* Linaro Toolchain, which can be obtained from
-   `here <https://releases.linaro.org/components/toolchain/binaries/4.9-2017.01/aarch64-linux-gnu>`_.
-
-3. **Rootfile system**
-
-   Any *aarch64* supporting filesystem can be used. For example,
-   Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained
-   from `<http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_.
-
-   As an alternative method, OCTEONTX PMD can also be executed using images provided
-   as part of SDK from Cavium. The SDK includes all the above prerequisites necessary
-   to bring up a OCTEONTX board.
-
-   SDK and related information can be obtained from: `Cavium support site <https://support.cavium.com/>`_.
-
-Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
+See :doc:`../platform/octeontx` for setup information.
 
 Pre-Installation Configuration
 ------------------------------
diff --git a/doc/guides/platform/index.rst b/doc/guides/platform/index.rst
new file mode 100644
index 0000000..69e560c
--- /dev/null
+++ b/doc/guides/platform/index.rst
@@ -0,0 +1,39 @@
+..  BSD LICENSE
+    Copyright (C) Cavium, Inc. 2017. All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Cavium Inc nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Platform Specific Guides
+========================
+
+The following are platform specific guides and setup information.
+
+.. toctree::
+    :maxdepth: 2
+    :numbered:
+
+    octeontx
diff --git a/doc/guides/platform/octeontx.rst b/doc/guides/platform/octeontx.rst
new file mode 100644
index 0000000..34c0339
--- /dev/null
+++ b/doc/guides/platform/octeontx.rst
@@ -0,0 +1,77 @@
+..  BSD LICENSE
+    Copyright (C) Cavium, Inc. 2017. All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Cavium, Inc nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+OCTEONTX Board Support Package
+==============================
+
+This doc has information about steps to setup octeontx platform
+and information about common offload hw block drivers of
+**Cavium OCTEONTX** SoC family.
+
+
+More information about SoC can be found at `Cavium, Inc Official Website
+<http://www.cavium.com/OCTEON-TX_ARM_Processors.html>`_.
+
+Common Offload HW Block Drivers
+-------------------------------
+
+1. **Eventdev Driver**
+   See :doc: `../eventdevs/octeontx.rst` for octeontx ssovf eventdev driver
+   information.
+
+Steps To Setup Platform
+-----------------------
+
+There are three main pre-prerequisites for setting up Platform drivers on
+OCTEONTX compatible board:
+
+1. **OCTEONTX Linux kernel PF driver for Network acceleration HW blocks**
+
+   The OCTEONTX Linux kernel drivers (includes the required PF driver for the
+   Platform drivers) are available on Github at `octeontx-kmod <https://github.com/caviumnetworks/octeontx-kmod>`_
+   along with build, install and dpdk usage instructions.
+
+2. **ARM64 Tool Chain**
+
+   For example, the *aarch64* Linaro Toolchain, which can be obtained from
+   `here <https://releases.linaro.org/components/toolchain/binaries/4.9-2017.01/aarch64-linux-gnu>`_.
+
+3. **Rootfile system**
+
+   Any *aarch64* supporting filesystem can be used. For example,
+   Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained
+   from `<http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_.
+
+   As an alternative method, Platform drivers can also be executed using images provided
+   as part of SDK from Cavium. The SDK includes all the above prerequisites necessary
+   to bring up a OCTEONTX board.
+
+   SDK and related information can be obtained from: `Cavium support site <https://support.cavium.com/>`_.
+
+- Follow the DPDK :doc: `../linux_gsg/index.rst` to setup the basic DPDK environment.
-- 
2.7.4

  reply	other threads:[~2017-11-07  7:00 UTC|newest]

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-24 13:28 [dpdk-dev] [PATCH v1 00/11] Cavium Octeontx external mempool driver Santosh Shukla
2017-08-24 13:28 ` [dpdk-dev] [PATCH v1 01/11] mempool/octeontx: add HW constants Santosh Shukla
2017-08-24 13:28 ` [dpdk-dev] [PATCH v1 02/11] mempool/octeontx: add build and log infrastructure Santosh Shukla
2017-08-24 13:28 ` [dpdk-dev] [PATCH v1 03/11] mempool/octeontx: probe fpavf pcie devices Santosh Shukla
2017-08-24 13:28 ` [dpdk-dev] [PATCH v1 04/11] mempool/octeontx: implement pool alloc Santosh Shukla
2017-08-24 13:28 ` [dpdk-dev] [PATCH v1 05/11] mempool/octeontx: implement pool free Santosh Shukla
2017-08-24 13:28 ` [dpdk-dev] [PATCH v1 06/11] mempool/octeontx: implement pool enq and deq Santosh Shukla
2017-08-24 13:28 ` [dpdk-dev] [PATCH v1 07/11] mempool/octeontx: implement pool get count Santosh Shukla
2017-08-24 13:29 ` [dpdk-dev] [PATCH v1 08/11] mempool/octeontx: implement pool get capability Santosh Shukla
2017-08-24 13:29 ` [dpdk-dev] [PATCH v1 09/11] mempool/octeontx: implement pool update range Santosh Shukla
2017-08-24 13:29 ` [dpdk-dev] [PATCH v1 10/11] mempool/octeontx: translate handle to pool Santosh Shukla
2017-08-24 13:29 ` [dpdk-dev] [PATCH v1 11/11] doc: add mempool and octeontx mempool device Santosh Shukla
2017-08-31  6:37 ` [dpdk-dev] [PATCH v2 00/10] Cavium Octeontx external mempool driver Santosh Shukla
2017-08-31  6:37   ` [dpdk-dev] [PATCH v2 01/10] mempool/octeontx: add HW constants Santosh Shukla
2017-08-31  6:37   ` [dpdk-dev] [PATCH v2 02/10] mempool/octeontx: add build and log infrastructure Santosh Shukla
2017-08-31  6:37   ` [dpdk-dev] [PATCH v2 03/10] mempool/octeontx: probe fpavf pcie devices Santosh Shukla
2017-08-31  6:37   ` [dpdk-dev] [PATCH v2 04/10] mempool/octeontx: implement pool alloc Santosh Shukla
2017-10-06 20:51     ` Thomas Monjalon
2017-10-07  3:49       ` santosh
2017-08-31  6:37   ` [dpdk-dev] [PATCH v2 05/10] mempool/octeontx: implement pool free Santosh Shukla
2017-08-31  6:37   ` [dpdk-dev] [PATCH v2 06/10] mempool/octeontx: implement pool enq and deq Santosh Shukla
2017-08-31  6:37   ` [dpdk-dev] [PATCH v2 07/10] mempool/octeontx: implement pool get count Santosh Shukla
2017-08-31  6:37   ` [dpdk-dev] [PATCH v2 08/10] mempool/octeontx: implement pool get capability Santosh Shukla
2017-08-31  6:37   ` [dpdk-dev] [PATCH v2 09/10] mempool/octeontx: implement pool update range Santosh Shukla
2017-08-31  6:37   ` [dpdk-dev] [PATCH v2 10/10] doc: add mempool and octeontx mempool device Santosh Shukla
2017-09-19 13:52     ` Mcnamara, John
2017-09-19  8:29   ` [dpdk-dev] [PATCH v2 00/10] Cavium Octeontx external mempool driver santosh
2017-10-06 20:55     ` Thomas Monjalon
2017-10-07  3:51       ` santosh
2017-10-07  4:26         ` Ferruh Yigit
2017-10-07  4:46           ` santosh
2017-10-08 13:12             ` santosh
2017-10-08 12:40   ` [dpdk-dev] [PATCH v3 " Santosh Shukla
2017-10-08 12:40     ` [dpdk-dev] [PATCH v3 01/10] mempool/octeontx: add HW constants Santosh Shukla
2017-10-08 12:40     ` [dpdk-dev] [PATCH v3 02/10] mempool/octeontx: add build and log infrastructure Santosh Shukla
2017-10-08 17:16       ` Thomas Monjalon
2017-10-09  5:03         ` santosh
2017-10-08 12:40     ` [dpdk-dev] [PATCH v3 03/10] mempool/octeontx: probe fpavf pcie devices Santosh Shukla
2017-10-08 12:40     ` [dpdk-dev] [PATCH v3 04/10] mempool/octeontx: add support for alloc Santosh Shukla
2017-10-08 12:40     ` [dpdk-dev] [PATCH v3 05/10] mempool/octeontx: add support for free Santosh Shukla
2017-10-08 12:40     ` [dpdk-dev] [PATCH v3 06/10] mempool/octeontx: add support for enq and deq Santosh Shukla
2017-10-08 12:40     ` [dpdk-dev] [PATCH v3 07/10] mempool/octeontx: add support for get count Santosh Shukla
2017-10-08 12:40     ` [dpdk-dev] [PATCH v3 08/10] mempool/octeontx: add support for get capability Santosh Shukla
2017-10-08 12:40     ` [dpdk-dev] [PATCH v3 09/10] mempool/octeontx: add support for memory area ops Santosh Shukla
2017-10-08 12:40     ` [dpdk-dev] [PATCH v3 10/10] doc: add mempool and octeontx mempool device Santosh Shukla
2017-10-08 16:43       ` Thomas Monjalon
2017-10-09  5:01         ` santosh
2017-10-09  5:46           ` santosh
2017-10-09  8:48             ` Thomas Monjalon
2017-10-09  9:19               ` santosh
2017-10-18 12:17                 ` santosh
2017-10-18 13:45                   ` Thomas Monjalon
2017-10-18 14:02                     ` santosh
2017-10-18 14:26                       ` Thomas Monjalon
2017-10-18 14:36                       ` Jerin Jacob
2017-10-18 15:11                         ` Thomas Monjalon
2017-10-20 15:21       ` [dpdk-dev] [PATCH v4 0/3] Octeontx doc misc Santosh Shukla
2017-10-20 15:21         ` [dpdk-dev] [PATCH v4 1/3] doc: add platform device Santosh Shukla
2017-10-21  9:41           ` Jerin Jacob
2017-10-21 21:09             ` Thomas Monjalon
2017-10-23 14:35           ` Mcnamara, John
2017-10-20 15:21         ` [dpdk-dev] [PATCH v4 2/3] doc: add mempool and octeontx mempool device Santosh Shukla
2017-10-23 14:48           ` Mcnamara, John
2017-10-20 15:21         ` [dpdk-dev] [PATCH v4 3/3] doc: use correct mempool ops handle name Santosh Shukla
2017-10-21  9:42           ` Jerin Jacob
2017-10-23 13:12           ` Mcnamara, John
2017-10-20 16:07         ` [dpdk-dev] [PATCH v4 0/3] Octeontx doc misc Mcnamara, John
2017-10-20 21:10           ` Thomas Monjalon
2017-10-23 14:02             ` Mcnamara, John
2017-11-07  6:59         ` [dpdk-dev] [PATCH v5 0/3] Doc misc Santosh Shukla
2017-11-07  6:59           ` Santosh Shukla [this message]
2017-11-10 17:42             ` [dpdk-dev] [PATCH v5 1/3] doc: add platform guide Mcnamara, John
2017-11-07  6:59           ` [dpdk-dev] [PATCH v5 2/3] doc: add mempool and octeontx mempool device Santosh Shukla
2017-11-10 17:43             ` Mcnamara, John
2017-11-07  6:59           ` [dpdk-dev] [PATCH v5 3/3] doc: use correct mempool ops handle name Santosh Shukla
2017-11-10 17:43             ` Mcnamara, John
2017-11-12  3:52           ` [dpdk-dev] [PATCH v5 0/3] Doc misc Thomas Monjalon
2017-10-08 17:16     ` [dpdk-dev] [PATCH v3 00/10] Cavium Octeontx external mempool driver Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1510037974-1511-2-git-send-email-santosh.shukla@caviumnetworks.com \
    --to=santosh.shukla@caviumnetworks.com \
    --cc=dev@dpdk.org \
    --cc=jerin.jacob@caviumnetworks.com \
    --cc=john.mcnamara@intel.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).