DPDK patches and discussions
 help / color / mirror / Atom feed
From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@intel.com>, <stable@dpdk.org>
Subject: [dpdk-dev] [PATCH 03/18] net/dpaa: fix FW version code
Date: Wed, 13 Dec 2017 17:35:44 +0530	[thread overview]
Message-ID: <1513166759-13466-4-git-send-email-hemant.agrawal@nxp.com> (raw)
In-Reply-To: <1513166759-13466-1-git-send-email-hemant.agrawal@nxp.com>

fix the soc id path and missing fclose

Fixes: cf0fab1d2ca5 ("net/dpaa: support firmware version get API")
Cc: stable@dpdk.org

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
 drivers/net/dpaa/dpaa_ethdev.c | 14 +++++---------
 drivers/net/dpaa/dpaa_ethdev.h |  2 +-
 2 files changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dpaa/dpaa_ethdev.c b/drivers/net/dpaa/dpaa_ethdev.c
index 3023302..29678c5 100644
--- a/drivers/net/dpaa/dpaa_ethdev.c
+++ b/drivers/net/dpaa/dpaa_ethdev.c
@@ -212,19 +212,15 @@ dpaa_fw_version_get(struct rte_eth_dev *dev __rte_unused,
 		DPAA_PMD_ERR("Unable to open SoC device");
 		return -ENOTSUP; /* Not supported on this infra */
 	}
-
-	ret = fscanf(svr_file, "svr:%x", &svr_ver);
-	if (ret <= 0) {
+	if (fscanf(svr_file, "svr:%x", &svr_ver) <= 0)
 		DPAA_PMD_ERR("Unable to read SoC device");
-		return -ENOTSUP; /* Not supported on this infra */
-	}
 
-	ret = snprintf(fw_version, fw_size,
-		       "svr:%x-fman-v%x",
-		       svr_ver,
-		       fman_ip_rev);
+	fclose(svr_file);
 
+	ret = snprintf(fw_version, fw_size, "SVR:%x-fman-v%x",
+		       svr_ver, fman_ip_rev);
 	ret += 1; /* add the size of '\0' */
+
 	if (fw_size < (uint32_t)ret)
 		return ret;
 	else
diff --git a/drivers/net/dpaa/dpaa_ethdev.h b/drivers/net/dpaa/dpaa_ethdev.h
index 5457d61..ec5ae13 100644
--- a/drivers/net/dpaa/dpaa_ethdev.h
+++ b/drivers/net/dpaa/dpaa_ethdev.h
@@ -46,7 +46,7 @@
 /* DPAA SoC identifier; If this is not available, it can be concluded
  * that board is non-DPAA. Single slot is currently supported.
  */
-#define DPAA_SOC_ID_FILE		"sys/devices/soc0/soc_id"
+#define DPAA_SOC_ID_FILE		"/sys/devices/soc0/soc_id"
 
 #define DPAA_MBUF_HW_ANNOTATION		64
 #define DPAA_FD_PTA_SIZE		64
-- 
2.7.4

  parent reply	other threads:[~2017-12-13 12:07 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-13 12:05 [dpdk-dev] [PATCH 00/18] DPAA PMD improvements Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 01/18] net/dpaa: fix coverity reported issues Hemant Agrawal
2018-01-09 10:46   ` Ferruh Yigit
2018-01-09 13:29     ` Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 02/18] net/dpaa: fix the mbuf packet type if zero Hemant Agrawal
2017-12-13 12:05 ` Hemant Agrawal [this message]
2017-12-13 12:05 ` [dpdk-dev] [PATCH 04/18] bus/dpaa: update platform soc value register routines Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 05/18] net/dpaa: set the correct frame size in device MTU Hemant Agrawal
2018-01-09 10:46   ` Ferruh Yigit
2017-12-13 12:05 ` [dpdk-dev] [PATCH 06/18] net/dpaa: add frame count based tail drop with CGR Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 07/18] bus/dpaa: optimize the qman HW stashing settings Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 08/18] bus/dpaa: optimize the endianness conversions Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 09/18] bus/dpaa: add support to create dynamic HW portal Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 10/18] net/dpaa: change Tx HW budget to 7 Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 11/18] net/dpaa: optimize the Tx burst Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 12/18] net/dpaa: optimize Rx path Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 13/18] bus/dpaa: query queue frame count support Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 14/18] net/dpaa: add Rx queue " Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 15/18] net/dpaa: add support for loopback API Hemant Agrawal
2018-01-09 10:46   ` Ferruh Yigit
2017-12-13 12:05 ` [dpdk-dev] [PATCH 16/18] app/testpmd: add support for loopback config for dpaa Hemant Agrawal
2017-12-13 12:05 ` [dpdk-dev] [PATCH 17/18] bus/dpaa: add support for static queues Hemant Agrawal
2018-01-09 10:46   ` Ferruh Yigit
2017-12-13 12:05 ` [dpdk-dev] [PATCH 18/18] net/dpaa: integrate the support of push mode in PMD Hemant Agrawal
2018-01-09 10:47 ` [dpdk-dev] [PATCH 00/18] DPAA PMD improvements Ferruh Yigit
2018-01-09 13:22 ` [dpdk-dev] [PATCH v2 " Hemant Agrawal
2018-01-09 13:22   ` [dpdk-dev] [PATCH v2 01/18] net/dpaa: fix the mbuf packet type if zero Hemant Agrawal
2018-01-09 13:22   ` [dpdk-dev] [PATCH v2 02/18] net/dpaa: fix FW version code Hemant Agrawal
2018-01-09 13:22   ` [dpdk-dev] [PATCH v2 03/18] bus/dpaa: update platform soc value register routines Hemant Agrawal
2018-01-09 13:22   ` [dpdk-dev] [PATCH v2 04/18] net/dpaa: set the correct frame size in device MTU Hemant Agrawal
2018-01-09 13:22   ` [dpdk-dev] [PATCH v2 05/18] net/dpaa: add frame count based tail drop with CGR Hemant Agrawal
2018-01-09 13:22   ` [dpdk-dev] [PATCH v2 06/18] bus/dpaa: optimize the qman HW stashing settings Hemant Agrawal
2018-01-09 13:22   ` [dpdk-dev] [PATCH v2 07/18] bus/dpaa: optimize the endianness conversions Hemant Agrawal
2018-01-09 13:22   ` [dpdk-dev] [PATCH v2 08/18] bus/dpaa: add support to create dynamic HW portal Hemant Agrawal
2018-01-09 13:22   ` [dpdk-dev] [PATCH v2 09/18] net/dpaa: change Tx HW budget to 7 Hemant Agrawal
2018-01-09 13:22   ` [dpdk-dev] [PATCH v2 10/18] net/dpaa: optimize the Tx burst Hemant Agrawal
2018-01-09 13:22   ` [dpdk-dev] [PATCH v2 11/18] net/dpaa: optimize Rx path Hemant Agrawal
2018-01-09 13:23   ` [dpdk-dev] [PATCH v2 12/18] bus/dpaa: query queue frame count support Hemant Agrawal
2018-01-09 13:23   ` [dpdk-dev] [PATCH v2 13/18] net/dpaa: add Rx queue " Hemant Agrawal
2018-01-09 13:23   ` [dpdk-dev] [PATCH v2 14/18] net/dpaa: add support for loopback API Hemant Agrawal
2018-01-09 13:23   ` [dpdk-dev] [PATCH v2 15/18] app/testpmd: add support for loopback config for dpaa Hemant Agrawal
2018-01-09 13:23   ` [dpdk-dev] [PATCH v2 16/18] bus/dpaa: add support for static queues Hemant Agrawal
2018-01-09 13:23   ` [dpdk-dev] [PATCH v2 17/18] net/dpaa: integrate the support of push mode in PMD Hemant Agrawal
2018-01-09 13:23   ` [dpdk-dev] [PATCH v2 18/18] bus/dpaa: support for enqueue frames of multiple queues Hemant Agrawal
2018-01-10 10:46   ` [dpdk-dev] [PATCH v3 00/19 ]DPAA PMD improvements Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 01/19] net/dpaa: fix uninitialized and unused variables Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 02/19] net/dpaa: fix the mbuf packet type if zero Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 03/19] net/dpaa: fix FW version code Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 04/19] bus/dpaa: update platform soc value register routines Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 05/19] net/dpaa: set the correct frame size in device MTU Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 06/19] net/dpaa: add frame count based tail drop with CGR Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 07/19] bus/dpaa: optimize the qman HW stashing settings Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 08/19] bus/dpaa: optimize the endianness conversions Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 09/19] bus/dpaa: add support to create dynamic HW portal Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 10/19] net/dpaa: change Tx HW budget to 7 Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 11/19] net/dpaa: optimize the Tx burst Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 12/19] net/dpaa: optimize Rx path Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 13/19] bus/dpaa: query queue frame count support Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 14/19] net/dpaa: add Rx queue " Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 15/19] net/dpaa: add support for loopback API Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 16/19] app/testpmd: add support for loopback config for dpaa Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 17/19] bus/dpaa: add support for static queues Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 18/19] net/dpaa: integrate the support of push mode in PMD Hemant Agrawal
2018-01-10 10:46     ` [dpdk-dev] [PATCH v3 19/19] bus/dpaa: support for enqueue frames of multiple queues Hemant Agrawal
2018-01-10 20:14     ` [dpdk-dev] [PATCH v3 00/19 ]DPAA PMD improvements Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1513166759-13466-4-git-send-email-hemant.agrawal@nxp.com \
    --to=hemant.agrawal@nxp.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).