From: Beilei Xing <beilei.xing@intel.com>
To: jingjing.wu@intel.com
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH] net/i40e: change VF default ITR interval
Date: Wed, 27 Dec 2017 14:01:49 +0800 [thread overview]
Message-ID: <1514354509-146422-1-git-send-email-beilei.xing@intel.com> (raw)
Current default ITR interval I40E_QUEUE_ITR_INTERVAL_DEFAULT is
used by both DPDK PF and DPDK VF, but this ITR interval value
will cause lots of interrupts when using VF. This patch modifies
VF default ITR interval to reduce interrupts.
ITR interval can be configured by RTE_LIBRTE_I40E_ITR_INTERVAL
if expecting low latency.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
---
drivers/net/i40e/i40e_ethdev.c | 6 +++---
drivers/net/i40e/i40e_ethdev.h | 11 ++++++++---
drivers/net/i40e/i40e_ethdev_vf.c | 4 ++--
3 files changed, 13 insertions(+), 8 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 9916f49..d2b50d4 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -1658,7 +1658,7 @@ __vsi_queues_bind_intr(struct i40e_vsi *vsi, uint16_t msix_vect,
/* Write first RX queue to Link list register as the head element */
if (vsi->type != I40E_VSI_SRIOV) {
uint16_t interval =
- i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL);
+ i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL, 1);
if (msix_vect == I40E_MISC_VEC_ID) {
I40E_WRITE_REG(hw, I40E_PFINT_LNKLST0,
@@ -1789,7 +1789,7 @@ i40e_vsi_enable_queues_intr(struct i40e_vsi *vsi)
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
struct i40e_hw *hw = I40E_VSI_TO_HW(vsi);
uint16_t interval = i40e_calc_itr_interval(\
- RTE_LIBRTE_I40E_ITR_INTERVAL);
+ RTE_LIBRTE_I40E_ITR_INTERVAL, 1);
uint16_t msix_intr, i;
if (rte_intr_allow_others(intr_handle))
@@ -10743,7 +10743,7 @@ i40e_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id)
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint16_t interval =
- i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL);
+ i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL, 1);
uint16_t msix_intr;
msix_intr = intr_handle->intr_vec[queue_id];
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index cd67453..d4cff71 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -189,6 +189,7 @@ enum i40e_flxpld_layer_idx {
#define I40E_ITR_INDEX_NONE 3
#define I40E_QUEUE_ITR_INTERVAL_DEFAULT 32 /* 32 us */
#define I40E_QUEUE_ITR_INTERVAL_MAX 8160 /* 8160 us */
+#define I40E_VF_QUEUE_ITR_INTERVAL_DEFAULT 8160 /* 8160 us */
/* Special FW support this floating VEB feature */
#define FLOATING_VEB_SUPPORTED_FW_MAJ 5
#define FLOATING_VEB_SUPPORTED_FW_MIN 0
@@ -1274,10 +1275,14 @@ i40e_align_floor(int n)
}
static inline uint16_t
-i40e_calc_itr_interval(int16_t interval)
+i40e_calc_itr_interval(int16_t interval, bool is_pf)
{
- if (interval < 0 || interval > I40E_QUEUE_ITR_INTERVAL_MAX)
- interval = I40E_QUEUE_ITR_INTERVAL_DEFAULT;
+ if (interval < 0 || interval > I40E_QUEUE_ITR_INTERVAL_MAX) {
+ if (is_pf)
+ interval = I40E_QUEUE_ITR_INTERVAL_DEFAULT;
+ else
+ interval = I40E_VF_QUEUE_ITR_INTERVAL_DEFAULT;
+ }
/* Convert to hardware count, as writing each 1 represents 2 us */
return interval / 2;
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 4927b14..a2e460a 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -1165,7 +1165,7 @@ i40evf_init_vf(struct rte_eth_dev *dev)
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
uint16_t interval =
- i40e_calc_itr_interval(I40E_QUEUE_ITR_INTERVAL_MAX);
+ i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL, 0);
vf->adapter = I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
vf->dev_data = dev->data;
@@ -1868,7 +1868,7 @@ i40evf_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id)
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint16_t interval =
- i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL);
+ i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL, 0);
uint16_t msix_intr;
msix_intr = intr_handle->intr_vec[queue_id];
--
2.5.5
next reply other threads:[~2017-12-27 6:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-27 6:01 Beilei Xing [this message]
2017-12-27 6:18 ` Wu, Jingjing
2018-01-09 7:52 ` Zhang, Helin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1514354509-146422-1-git-send-email-beilei.xing@intel.com \
--to=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).