From: Moti Haimovsky <motih@mellanox.com>
To: gaetan.rivet@6wind.com, ferruh.yigit@intel.com
Cc: dev@dpdk.org, Moti Haimovsky <motih@mellanox.com>
Subject: [dpdk-dev] [PATCH v8 2/3] net/failsafe: slaves Rx interrupts registration
Date: Thu, 25 Jan 2018 18:19:31 +0200 [thread overview]
Message-ID: <1516897172-81448-3-git-send-email-motih@mellanox.com> (raw)
In-Reply-To: <1516897172-81448-1-git-send-email-motih@mellanox.com>
This commit adds the following functionality to failsafe PMD:
* Register and unregister slaves Rx interrupts.
* Enable and Disable slaves Rx interrupts.
The interrupts events generated by the slaves are not handled in this
commit.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
---
V8:
Modifications according to inputs from Ferruh Yigit
in reply to
1516867635-67104-3-git-send-email-motih@mellanox.com
V7:
Fixed compilation errors in FreeBSD.
See 1516810328-39383-3-git-send-email-motih@mellanox.com
V6:
Added a wrapper around epoll_create1 since it is not supported in FreeBSD.
See: 1516193643-130838-1-git-send-email-motih@mellanox.com
V5:
Initial version of this patch in accordance to inputs from Gaetan Rivet
in reply to
1516354344-13495-2-git-send-email-motih@mellanox.com
---
drivers/net/failsafe/Makefile | 5 +
drivers/net/failsafe/failsafe_ether.c | 1 +
drivers/net/failsafe/failsafe_intr.c | 234 +++++++++++++++++++++++++++++++-
drivers/net/failsafe/failsafe_ops.c | 36 ++++-
drivers/net/failsafe/failsafe_private.h | 16 +++
5 files changed, 289 insertions(+), 3 deletions(-)
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index 91a734b..9bce1f7 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -47,6 +47,11 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_flow.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_intr.c
+ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+CFLAGS += -DLINUX
+else
+CFLAGS += -DBSD
+endif
# No exported include files
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 8a4cacf..0f1630e 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -283,6 +283,7 @@
return;
switch (sdev->state) {
case DEV_STARTED:
+ failsafe_rx_intr_uninstall_subdevice(sdev);
rte_eth_dev_stop(PORT_ID(sdev));
sdev->state = DEV_ACTIVE;
/* fallthrough */
diff --git a/drivers/net/failsafe/failsafe_intr.c b/drivers/net/failsafe/failsafe_intr.c
index 8829ca4..b0eacdc 100644
--- a/drivers/net/failsafe/failsafe_intr.c
+++ b/drivers/net/failsafe/failsafe_intr.c
@@ -7,10 +7,231 @@
* Interrupts handling for failsafe driver.
*/
+#if defined(LINUX)
+#include <sys/epoll.h>
+#endif
#include <unistd.h>
#include "failsafe_private.h"
+#define NUM_RX_PROXIES (FAILSAFE_MAX_ETHPORTS * RTE_MAX_RXTX_INTR_VEC_ID)
+
+
+/**
+ * Open an epoll file descriptor.
+ *
+ * @param flags
+ * Flags for defining epoll behavior.
+ * @return
+ * 0 on success, negative errno value otherwise.
+ */
+static int
+fs_epoll_create1(int flags)
+{
+#if defined(LINUX)
+ return epoll_create1(flags);
+#elif defined(BSD)
+ RTE_SET_USED(flags);
+ return -ENOTSUP;
+#endif
+}
+
+/**
+ * Install failsafe Rx event proxy subsystem.
+ * This is the way the failsafe PMD generates Rx events on behalf of its
+ * subdevices.
+ *
+ * @param priv
+ * Pointer to failsafe private structure.
+ * @return
+ * 0 on success, negative errno value otherwise and rte_errno is set.
+ */
+static int
+fs_rx_event_proxy_install(struct fs_priv *priv)
+{
+ int rc = 0;
+
+ /*
+ * Create the epoll fd and event vector for the proxy service to
+ * wait on for Rx events generated by the subdevices.
+ */
+ priv->rxp.efd = fs_epoll_create1(0);
+ if (priv->rxp.efd < 0) {
+ rte_errno = errno;
+ ERROR("Failed to create epoll,"
+ " Rx interrupts will not be supported");
+ return -rte_errno;
+ }
+ priv->rxp.evec = calloc(NUM_RX_PROXIES, sizeof(*priv->rxp.evec));
+ if (priv->rxp.evec == NULL) {
+ ERROR("Failed to allocate memory for event vectors,"
+ " Rx interrupts will not be supported");
+ rc = -ENOMEM;
+ goto error;
+ }
+ return 0;
+error:
+ if (priv->rxp.efd >= 0) {
+ close(priv->rxp.efd);
+ priv->rxp.efd = -1;
+ }
+ if (priv->rxp.evec != NULL) {
+ free(priv->rxp.evec);
+ priv->rxp.evec = NULL;
+ }
+ rte_errno = -rc;
+ return rc;
+}
+
+/**
+ * RX Interrupt control per subdevice.
+ *
+ * @param sdev
+ * Pointer to sub-device structure.
+ * @param op
+ * The operation be performed for the vector.
+ * Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}.
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+failsafe_eth_rx_intr_ctl_subdevice(struct sub_device *sdev, int op)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev *fsdev;
+ int epfd;
+ uint16_t pid;
+ uint16_t qid;
+ struct rxq *fsrxq;
+ int rc;
+ int ret = 0;
+
+ if (sdev == NULL || (ETH(sdev) == NULL) ||
+ sdev->fs_dev == NULL || (PRIV(sdev->fs_dev) == NULL)) {
+ ERROR("Called with invalid arguments");
+ return -EINVAL;
+ }
+ dev = ETH(sdev);
+ fsdev = sdev->fs_dev;
+ epfd = PRIV(sdev->fs_dev)->rxp.efd;
+ pid = PORT_ID(sdev);
+
+ if (epfd <= 0) {
+ if (op == RTE_INTR_EVENT_ADD) {
+ ERROR("Proxy events are not initialized");
+ return -EBADF;
+ } else {
+ return 0;
+ }
+ }
+ if (dev->data->nb_rx_queues > fsdev->data->nb_rx_queues) {
+ ERROR("subdevice has too many queues,"
+ " Interrupts will not be enabled");
+ return -E2BIG;
+ }
+ for (qid = 0; qid < dev->data->nb_rx_queues; qid++) {
+ fsrxq = fsdev->data->rx_queues[qid];
+ rc = rte_eth_dev_rx_intr_ctl_q(pid, qid, epfd,
+ op, (void *)fsrxq);
+ if (rc) {
+ ERROR("rte_eth_dev_rx_intr_ctl_q failed for "
+ "port %d queue %d, epfd %d, error %d",
+ pid, qid, epfd, rc);
+ ret = rc;
+ }
+ }
+ return ret;
+}
+
+/**
+ * Install Rx interrupts subsystem for a subdevice.
+ * This is a support for dynamically adding subdevices.
+ *
+ * @param sdev
+ * Pointer to subdevice structure.
+ *
+ * @return
+ * 0 on success, negative errno value otherwise and rte_errno is set.
+ */
+int failsafe_rx_intr_install_subdevice(struct sub_device *sdev)
+{
+ int rc;
+ int qid;
+ struct rte_eth_dev *fsdev;
+ struct rxq **rxq;
+ const struct rte_intr_conf *const intr_conf =
+ Ð(sdev)->data->dev_conf.intr_conf;
+
+ fsdev = sdev->fs_dev;
+ rxq = (struct rxq **)fsdev->data->rx_queues;
+ if (intr_conf->rxq == 0)
+ return 0;
+ rc = failsafe_eth_rx_intr_ctl_subdevice(sdev, RTE_INTR_EVENT_ADD);
+ if (rc)
+ return rc;
+ /* enable interrupts on already-enabled queues */
+ for (qid = 0; qid < ETH(sdev)->data->nb_rx_queues; qid++) {
+ if (rxq[qid]->enable_events) {
+ int ret = rte_eth_dev_rx_intr_enable(PORT_ID(sdev),
+ qid);
+ if (ret && (ret != -ENOTSUP)) {
+ ERROR("Failed to enable interrupts on "
+ "port %d queue %d", PORT_ID(sdev), qid);
+ rc = ret;
+ }
+ }
+ }
+ return rc;
+}
+
+/**
+ * Uninstall Rx interrupts subsystem for a subdevice.
+ * This is a support for dynamically removing subdevices.
+ *
+ * @param sdev
+ * Pointer to subdevice structure.
+ *
+ * @return
+ * 0 on success, negative errno value otherwise and rte_errno is set.
+ */
+void failsafe_rx_intr_uninstall_subdevice(struct sub_device *sdev)
+{
+ int qid;
+ struct rte_eth_dev *fsdev;
+ struct rxq *fsrxq;
+
+ fsdev = sdev->fs_dev;
+ for (qid = 0; qid < ETH(sdev)->data->nb_rx_queues; qid++) {
+ if (qid < fsdev->data->nb_rx_queues) {
+ fsrxq = fsdev->data->rx_queues[qid];
+ if (fsrxq->enable_events)
+ rte_eth_dev_rx_intr_disable(PORT_ID(sdev),
+ qid);
+ }
+ }
+ failsafe_eth_rx_intr_ctl_subdevice(sdev, RTE_INTR_EVENT_DEL);
+}
+
+/**
+ * Uninstall failsafe Rx event proxy.
+ *
+ * @param priv
+ * Pointer to failsafe private structure.
+ */
+static void
+fs_rx_event_proxy_uninstall(struct fs_priv *priv)
+{
+ if (priv->rxp.evec != NULL) {
+ free(priv->rxp.evec);
+ priv->rxp.evec = NULL;
+ }
+ if (priv->rxp.efd > 0) {
+ close(priv->rxp.efd);
+ priv->rxp.efd = -1;
+ }
+}
+
/**
* Uninstall failsafe interrupt vector.
*
@@ -107,7 +328,14 @@
void
failsafe_rx_intr_uninstall(struct rte_eth_dev *dev)
{
- fs_rx_intr_vec_uninstall(PRIV(dev));
+ struct fs_priv *priv;
+ struct rte_intr_handle *intr_handle;
+
+ priv = PRIV(dev);
+ intr_handle = &priv->intr_handle;
+ rte_intr_free_epoll_fd(intr_handle);
+ fs_rx_event_proxy_uninstall(priv);
+ fs_rx_intr_vec_uninstall(priv);
dev->intr_handle = NULL;
}
@@ -131,6 +359,10 @@
return 0;
if (fs_rx_intr_vec_install(priv) < 0)
return -rte_errno;
+ if (fs_rx_event_proxy_install(priv) < 0) {
+ fs_rx_intr_vec_uninstall(priv);
+ return -rte_errno;
+ }
dev->intr_handle = &priv->intr_handle;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 5cbc591..249baea 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -213,6 +213,13 @@
continue;
return ret;
}
+ ret = failsafe_rx_intr_install_subdevice(sdev);
+ if (ret) {
+ if (!fs_err(sdev, ret))
+ continue;
+ rte_eth_dev_stop(PORT_ID(sdev));
+ return ret;
+ }
sdev->state = DEV_STARTED;
}
if (PRIV(dev)->state < DEV_STARTED)
@@ -230,6 +237,7 @@
PRIV(dev)->state = DEV_STARTED - 1;
FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_STARTED) {
rte_eth_dev_stop(PORT_ID(sdev));
+ failsafe_rx_intr_uninstall_subdevice(sdev);
sdev->state = DEV_STARTED - 1;
}
failsafe_rx_intr_uninstall(dev);
@@ -412,6 +420,10 @@
fs_rx_intr_enable(struct rte_eth_dev *dev, uint16_t idx)
{
struct rxq *rxq;
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+ int rc = 0;
if (idx >= dev->data->nb_rx_queues) {
rte_errno = EINVAL;
@@ -423,14 +435,26 @@
return -rte_errno;
}
rxq->enable_events = 1;
- return 0;
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_dev_rx_intr_enable(PORT_ID(sdev), idx);
+ ret = fs_err(sdev, ret);
+ if (ret)
+ rc = ret;
+ }
+ if (rc)
+ rte_errno = -rc;
+ return rc;
}
static int
fs_rx_intr_disable(struct rte_eth_dev *dev, uint16_t idx)
{
struct rxq *rxq;
+ struct sub_device *sdev;
uint64_t u64;
+ uint8_t i;
+ int rc = 0;
+ int ret;
if (idx >= dev->data->nb_rx_queues) {
rte_errno = EINVAL;
@@ -442,10 +466,18 @@
return -rte_errno;
}
rxq->enable_events = 0;
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_dev_rx_intr_disable(PORT_ID(sdev), idx);
+ ret = fs_err(sdev, ret);
+ if (ret)
+ rc = ret;
+ }
/* Clear pending events */
while (read(rxq->event_fd, &u64, sizeof(uint64_t)) > 0)
;
- return 0;
+ if (rc)
+ rte_errno = -rc;
+ return rc;
}
static bool
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 419e5e7..ff78b9f 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -63,6 +63,13 @@
/* TYPES */
+struct rx_proxy {
+ /* epoll file descriptor */
+ int efd;
+ /* event vector to be used by epoll */
+ struct rte_epoll_event *evec;
+};
+
struct rxq {
struct fs_priv *priv;
uint16_t qid;
@@ -158,6 +165,13 @@ struct fs_priv {
*/
enum dev_state state;
struct rte_eth_stats stats_accumulator;
+ /*
+ * Rx interrupts/events proxy.
+ * The PMD issues Rx events to the EAL on behalf of its subdevices,
+ * it does that by registering an event-fd for each of its queues with
+ * the EAL.
+ */
+ struct rx_proxy rxp;
unsigned int pending_alarm:1; /* An alarm is pending */
/* flow isolation state */
int flow_isolated:1;
@@ -167,6 +181,8 @@ struct fs_priv {
int failsafe_rx_intr_install(struct rte_eth_dev *dev);
void failsafe_rx_intr_uninstall(struct rte_eth_dev *dev);
+int failsafe_rx_intr_install_subdevice(struct sub_device *sdev);
+void failsafe_rx_intr_uninstall_subdevice(struct sub_device *sdev);
/* MISC */
--
1.8.3.1
next prev parent reply other threads:[~2018-01-25 16:20 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-11 12:41 [dpdk-dev] [PATCH] net/failsafe: add Rx interrupts Moti Haimovsky
2017-12-12 1:34 ` Stephen Hemminger
2017-12-13 13:12 ` Mordechay Haimovsky
2018-01-04 15:01 ` [dpdk-dev] [PATCH v2] " Moti Haimovsky
2018-01-17 12:54 ` [dpdk-dev] [PATCH V3] " Moti Haimovsky
2018-01-19 9:32 ` [dpdk-dev] [PATCH v4] " Moti Haimovsky
2018-01-19 9:32 ` Moti Haimovsky
2018-01-19 14:11 ` Gaëtan Rivet
2018-01-23 18:43 ` [dpdk-dev] [PATCH v5 0/3] net/failsafe: add Rx interrupts support Moti Haimovsky
2018-01-23 18:43 ` [dpdk-dev] [PATCH v5 1/3] net/failsafe: regiter as an Rx interrupt mode PMD Moti Haimovsky
2018-01-23 18:43 ` [dpdk-dev] [PATCH v5 2/3] net/failsafe: slaves Rx interrupts registration Moti Haimovsky
2018-01-24 16:12 ` [dpdk-dev] [PATCH v6 0/3] net/failsafe: add Rx interrupts support Moti Haimovsky
2018-01-24 16:12 ` [dpdk-dev] [PATCH v6 1/3] net/failsafe: register as an Rx interrupt mode PMD Moti Haimovsky
2018-01-24 16:12 ` [dpdk-dev] [PATCH v6 2/3] net/failsafe: slaves Rx interrupts registration Moti Haimovsky
2018-01-25 8:07 ` [dpdk-dev] [PATCH v7 0/3] net/failsafe: add Rx interrupts support Moti Haimovsky
2018-01-25 8:07 ` [dpdk-dev] [PATCH v7 1/3] net/failsafe: register as an Rx interrupt mode PMD Moti Haimovsky
2018-01-25 11:36 ` Gaëtan Rivet
2018-01-25 8:07 ` [dpdk-dev] [PATCH v7 2/3] net/failsafe: slaves Rx interrupts registration Moti Haimovsky
2018-01-25 11:49 ` Gaëtan Rivet
2018-01-25 8:07 ` [dpdk-dev] [PATCH v7 3/3] net/failsafe: add Rx interrupts Moti Haimovsky
2018-01-25 11:58 ` Gaëtan Rivet
2018-01-25 16:19 ` [dpdk-dev] [PATCH v8 0/3] net/failsafe: add Rx interrupts support Moti Haimovsky
2018-01-25 16:19 ` [dpdk-dev] [PATCH v8 1/3] net/failsafe: register as an Rx interrupt mode PMD Moti Haimovsky
2018-01-25 16:19 ` Moti Haimovsky [this message]
2018-01-25 16:19 ` [dpdk-dev] [PATCH v8 3/3] net/failsafe: add Rx interrupts Moti Haimovsky
2018-01-25 16:53 ` [dpdk-dev] [PATCH v8 0/3] net/failsafe: add Rx interrupts support Gaëtan Rivet
2018-01-26 18:22 ` Ferruh Yigit
2018-01-24 16:12 ` [dpdk-dev] [PATCH v6 3/3] net/failsafe: add Rx interrupts Moti Haimovsky
2018-01-23 18:43 ` [dpdk-dev] [PATCH v5 " Moti Haimovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516897172-81448-3-git-send-email-motih@mellanox.com \
--to=motih@mellanox.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=gaetan.rivet@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).