[dpdk-dev] [PATCH v2 1/3] compressdev: add structs and enum for compression service

[Fiona Trahe <fiona.trahe@intel.com>]

Introduce enums and structs to support the transforms and
operations needed for a compression service.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
---
 MAINTAINERS                       |   7 +
 lib/librte_compressdev/rte_comp.h | 528 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 535 insertions(+)
 create mode 100644 lib/librte_compressdev/rte_comp.h

diff --git a/MAINTAINERS b/MAINTAINERS
index a646ca3..068f85e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -325,6 +325,13 @@ F: drivers/raw/skeleton_rawdev/
 F: test/test/test_rawdev.c
 F: doc/guides/prog_guide/rawdev.rst
 
+Compression API - EXPERIMENTAL
+M: Fiona Trahe <fiona.trahe@intel.com>
+M: Pablo de Lara <pablo.de.lara.guarch@intel.com>
+M: Ashish Gupta <ashish.gupta@caviumnetworks.com>
+T: TBD
+F: lib/librte_compressdev/
+
 
 Bus Drivers
 -----------
diff --git a/lib/librte_compressdev/rte_comp.h b/lib/librte_compressdev/rte_comp.h
new file mode 100644
index 0000000..7d755ee
--- /dev/null
+++ b/lib/librte_compressdev/rte_comp.h
@@ -0,0 +1,528 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2017-2018 Intel Corporation
+ */
+
+#ifndef _RTE_COMP_H_
+#define _RTE_COMP_H_
+
+/**
+ * @file rte_comp.h
+ *
+ * RTE definitions for Data Compression Service
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <string.h>
+#include <rte_mempool.h>
+
+
+/** Status of comp operation */
+enum rte_comp_op_status {
+	RTE_COMP_OP_STATUS_SUCCESS = 0,
+	/**< Operation completed successfully */
+	RTE_COMP_OP_STATUS_NOT_PROCESSED,
+	/**< Operation has not yet been processed by the device */
+	RTE_COMP_OP_STATUS_INVALID_ARGS,
+	/**< Operation failed due to invalid arguments in request */
+	RTE_COMP_OP_STATUS_ERROR,
+	/**< Error handling operation */
+	RTE_COMP_OP_STATUS_INVALID_STATE,
+	/**< Operation is invoked in invalid state */
+	RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED,
+	/**< Output buffer ran out of space before operation completed.
+	 * Error case. Application must resubmit all data with a larger
+	 * output buffer.
+	 */
+	RTE_COMP_OP_STATUS_OUT_OF_SPACE_RECOVERABLE,
+	/**< Output buffer ran out of space before operation completed, but this
+	 * is not an error case. Output data up to op.produced can be used and
+	 * next op in the stream should continue on from op.consumed+1.
+	 */
+};
+
+
+/** Compression Algorithms */
+enum rte_comp_algorithm {
+	RTE_COMP_ALGO_UNSPECIFIED = 0,
+	/** No Compression algorithm */
+	RTE_COMP_ALGO_NULL,
+	/**< No compression.
+	 * Pass-through, data is copied unchanged from source buffer to
+	 * destination buffer.
+	 */
+	RTE_COMP_ALGO_DEFLATE,
+	/**< DEFLATE compression algorithm
+	 * https://tools.ietf.org/html/rfc1951
+	 */
+	RTE_COMP_ALGO_LZS,
+	/**< LZS compression algorithm
+	 * https://tools.ietf.org/html/rfc2395
+	 */
+	RTE_COMP_ALGO_LIST_END
+};
+
+/**< Compression Level.
+ * The number is interpreted by each PMD differently. However, lower numbers
+ * give fastest compression, at the expense of compression ratio while
+ * higher numbers may give better compression ratios but are likely slower.
+ */
+#define	RTE_COMP_LEVEL_PMD_DEFAULT	(-1)
+/** Use PMD Default */
+#define	RTE_COMP_LEVEL_NONE		(0)
+/** Output uncompressed blocks if supported by the specified algorithm */
+#define RTE_COMP_LEVEL_MIN		(1)
+/** Use minimum compression level supported by the PMD */
+#define RTE_COMP_LEVEL_MAX		(9)
+/** Use maximum compression level supported by the PMD */
+
+/** Compression checksum types */
+enum rte_comp_checksum_type {
+	RTE_COMP_CHECKSUM_NONE,
+	/**< No checksum generated */
+	RTE_COMP_CHECKSUM_CRC32,
+	/**< Generates a CRC32 checksum, as used by gzip */
+	RTE_COMP_CHECKSUM_ADLER32,
+	/**< Generates an Adler-32 checksum, as used by zlib */
+	RTE_COMP_CHECKSUM_CRC32_ADLER32,
+	/**< Generates both Adler-32 and CRC32 checksums, concatenated.
+	 * CRC32 is in the lower 32bits, Adler-32 in the upper 32 bits.
+	 */
+};
+
+
+/** Compression Huffman Type - used by DEFLATE algorithm */
+enum rte_comp_huffman {
+	RTE_COMP_HUFFMAN_DEFAULT,
+	/**< PMD may choose which Huffman codes to use */
+	RTE_COMP_HUFFMAN_FIXED,
+	/**< Use Fixed Huffman codes */
+	RTE_COMP_HUFFMAN_DYNAMIC,
+	/**< Use Dynamic Huffman codes */
+};
+
+enum rte_comp_flush_flag {
+	RTE_COMP_FLUSH_NONE,
+	/**< Data is not flushed. Output may remain in the compressor and be
+	 * processed during a following op. It may not be possible to decompress
+	 * output until a later op with some other flush flag has been sent.
+	 */
+	RTE_COMP_FLUSH_SYNC,
+	/**< All data should be flushed to output buffer. Output data can be
+	 * decompressed. However state and history is not cleared, so future
+	 * operations may use history from this operation.
+	 */
+	RTE_COMP_FLUSH_FULL,
+	/**< All data should be flushed to output buffer. Output data can be
+	 * decompressed. State and history data is cleared, so future
+	 * ops will be independent of ops processed before this.
+	 */
+	RTE_COMP_FLUSH_FINAL
+	/**< Same as RTE_COMP_FLUSH_FULL but if op.algo is RTE_COMP_ALGO_DEFLATE
+	 * then bfinal bit is set in the last block.
+	 */
+};
+
+/** Compression transform types */
+enum rte_comp_xform_type {
+	RTE_COMP_COMPRESS,
+	/**< Compression service - compress */
+	RTE_COMP_DECOMPRESS,
+	/**< Compression service - decompress */
+};
+
+enum rte_comp_private_xform_mode {
+	RTE_COMP_PRIV_XFORM_SHAREABLE,
+	/**< private_xform can be attached
+	 * to multiple ops inflight in the device simultaneously
+	 */
+	RTE_COMP_PRIV_XFORM_NOT_SHAREABLE
+	/**< private_xform can only be used on one inflight op at a time. */
+};
+
+enum rte_comp_op_type {
+	RTE_COMP_OP_STATELESS,
+	/**< All data to be processed is submitted in the op, no state or
+	 * history from previous ops is used and none will be stored for future
+	 * ops. Flush flag must be set to either FLUSH_FULL or FLUSH_FINAL.
+	 */
+	RTE_COMP_OP_STATEFUL
+	/**< There may be more data to be processed after this op, it's part of
+	 * a stream of data. State and history from previous ops can be used
+	 * and resulting state and history can be stored for future ops,
+	 * depending on flush flag.
+	 */
+};
+
+
+/** Parameters specific to the deflate algorithm */
+struct rte_comp_deflate_params {
+	enum rte_comp_huffman huffman;
+	/**< Compression huffman encoding type */
+};
+
+/** Setup Data for compression */
+struct rte_comp_compress_xform {
+	enum rte_comp_algorithm algo;
+	/**< Algorithm to use for compress operation */
+	union {
+		struct rte_comp_deflate_params deflate;
+		/**< Parameters specific to the deflate algorithm */
+	}; /**< Algorithm specific parameters */
+	int level;
+	/**< Compression level */
+	uint8_t window_size;
+	/**< Base two log value of sliding window to be used. If window size
+	 * can't be supported by the PMD then it may fall back to a smaller
+	 * size. This is likely to result in a worse compression ratio.
+	 */
+	enum rte_comp_checksum_type chksum;
+	/**< Type of checksum to generate on the uncompressed data */
+};
+
+/**
+ * Setup Data for decompression.
+ */
+struct rte_comp_decompress_xform {
+	enum rte_comp_algorithm algo;
+	/**< Algorithm to use for decompression */
+	enum rte_comp_checksum_type chksum;
+	/**< Type of checksum to generate on the decompressed data */
+	uint8_t window_size;
+	/**< Base two log value of sliding window which was used to generate
+	 * compressed data. If window size can't be supported by the PMD then
+	 * setup of stream or private_xform should fail.
+	 */
+};
+
+/**
+ * Compression transform structure.
+ *
+ * This is used to specify the compression transforms required.
+ * Each transform structure can hold a single transform, the type field is
+ * used to specify which transform is contained within the union.
+ * There are no chain cases currently supported, just single xforms of
+ *  - compress-only
+ *  - decompress-only
+ *
+ */
+struct rte_comp_xform {
+	struct rte_comp_xform *next;
+	/**< next xform in chain */
+	enum rte_comp_xform_type type;
+	/**< xform type */
+	union {
+		struct rte_comp_compress_xform compress;
+		/**< xform for compress operation */
+		struct rte_comp_decompress_xform decompress;
+		/**< decompress xform */
+	};
+};
+
+
+/**
+ * Compression Operation.
+ *
+ * This structure contains data relating to performing a compression
+ * operation on the referenced mbuf data buffers.
+ *
+ * Comp operations are enqueued and dequeued in comp PMDs using the
+ * rte_compressdev_enqueue_burst() / rte_compressdev_dequeue_burst() APIs
+ */
+struct rte_comp_op {
+
+	enum rte_comp_op_type op_type;
+	union {
+		void *private_xform;
+		/**< Stateless private PMD data derived from an rte_comp_xform.
+		 * A handle returned by rte_compressdev_private_xform_create()
+		 * must be attached to operations of op_type RTE_COMP_STATELESS.
+		 */
+		void *stream;
+		/**< Private PMD data derived initially from an rte_comp_xform,
+		 * which holds state and history data and evolves as operations
+		 * are processed. rte_comp_stream_create() must be called on a
+		 * device for all STATEFUL data streams and the resulting
+		 * stream attached to the one or more operations associated
+		 * with the data stream.
+		 * All operations in a stream must be sent to the same device.
+		 */
+	};
+
+	struct rte_mempool *mempool;
+	/**< Pool from which operation is allocated */
+	rte_iova_t phys_addr;
+	/**< Physical address of this operation */
+	struct rte_mbuf *m_src;
+	/**< source mbuf
+	 * The total size of the input buffer(s) can be retrieved using
+	 * rte_pktmbuf_data_len(m_src)
+	 */
+	struct rte_mbuf *m_dst;
+	/**< destination mbuf
+	 * The total size of the output buffer(s) can be retrieved using
+	 * rte_pktmbuf_data_len(m_dst)
+	 */
+
+	struct {
+		uint32_t offset;
+		/**< Starting point for compression or decompression,
+		 * specified as number of bytes from start of packet in
+		 * source buffer.
+		 * Starting point for checksum generation in compress direction.
+		 */
+		uint32_t length;
+		/**< The length, in bytes, of the data in source buffer
+		 * to be compressed or decompressed.
+		 * Also the length of the data over which the checksum
+		 * should be generated in compress direction
+		 */
+	} src;
+	struct {
+		uint32_t offset;
+		/**< Starting point for writing output data, specified as
+		 * number of bytes from start of packet in dest
+		 * buffer. Starting point for checksum generation in
+		 * decompress direction.
+		 */
+	} dst;
+	enum rte_comp_flush_flag flush_flag;
+	/**< Defines flush characteristics for the output data.
+	 * Only applicable in compress direction
+	 */
+	uint64_t input_chksum;
+	/**< An input checksum can be provided to generate a
+	 * cumulative checksum across sequential blocks in a STATELESS stream.
+	 * Checksum type is as specified in xform chksum_type
+	 */
+	uint64_t output_chksum;
+	/**< If a checksum is generated it will be written in here.
+	 * Checksum type is as specified in xform chksum_type.
+	 */
+	uint32_t consumed;
+	/**< The number of bytes from the source buffer
+	 * which were compressed/decompressed.
+	 */
+	uint32_t produced;
+	/**< The number of bytes written to the destination buffer
+	 * which were compressed/decompressed.
+	 */
+	uint64_t debug_status;
+	/**<
+	 * Status of the operation is returned in the status param.
+	 * This field allows the PMD to pass back extra
+	 * pmd-specific debug information. Value is not defined on the API.
+	 */
+	uint8_t status;
+	/**<
+	 * Operation status - use values from enum rte_comp_status.
+	 * This is reset to
+	 * RTE_COMP_OP_STATUS_NOT_PROCESSED on allocation from mempool and
+	 * will be set to RTE_COMP_OP_STATUS_SUCCESS after operation
+	 * is successfully processed by a PMD
+	 */
+} __rte_cache_aligned;
+
+
+/**
+ * Reset the fields of an operation to their default values.
+ *
+ * @note The private data associated with the operation is not zeroed.
+ *
+ * @param op
+ *   The operation to be reset
+ */
+static inline void
+__rte_comp_op_reset(struct rte_comp_op *op)
+{
+	struct rte_mempool *tmp_mp = op->mempool;
+	phys_addr_t tmp_phys_addr = op->phys_addr;
+
+	memset(op, 0, sizeof(struct rte_comp_op));
+	op->status = RTE_COMP_OP_STATUS_NOT_PROCESSED;
+	op->phys_addr = tmp_phys_addr;
+	op->mempool = tmp_mp;
+}
+
+/**
+ * Private data structure belonging to an operation pool.
+ */
+struct rte_comp_op_pool_private {
+	uint16_t user_size;
+	/**< Size of private user data with each operation. */
+};
+
+
+/**
+ * Returns the size of private user data allocated with each object in
+ * the mempool
+ *
+ * @param mempool
+ *   Mempool for operations
+ * @return
+ *   user data size
+ */
+static inline uint16_t
+__rte_comp_op_get_user_data_size(struct rte_mempool *mempool)
+{
+	struct rte_comp_op_pool_private *priv =
+	    (struct rte_comp_op_pool_private *)rte_mempool_get_priv(mempool);
+
+	return priv->user_size;
+}
+
+
+/**
+ * Creates an operation pool
+ *
+ * @param name
+ *   Compress pool name
+ * @param nb_elts
+ *   Number of elements in pool
+ * @param cache_size
+ *   Number of elements to cache on lcore, see
+ *   *rte_mempool_create* for further details about cache size
+ * @param user_size
+ *   Size of private data to allocate for user with each operation
+ * @param socket_id
+ *   Socket to identifier allocate memory on
+ * @return
+ *  - On success pointer to mempool
+ *  - On failure NULL
+ */
+struct rte_mempool *
+rte_comp_op_pool_create(const char *name,
+		unsigned int nb_elts, unsigned int cache_size,
+		uint16_t user_size, int socket_id);
+
+/**
+ * Bulk allocate raw element from mempool and return as comp operations
+ *
+ * @param mempool
+ *   Compress operation mempool
+ * @param ops
+ *   Array to place allocated operations
+ * @param nb_ops
+ *   Number of operations to allocate
+ * @return
+ * - On success returns  number of ops allocated
+ */
+static inline int
+__rte_comp_op_raw_bulk_alloc(struct rte_mempool *mempool,
+		struct rte_comp_op **ops, uint16_t nb_ops)
+{
+	if (rte_mempool_get_bulk(mempool, (void **)ops, nb_ops) == 0)
+		return nb_ops;
+
+	return 0;
+}
+
+/**
+ * Allocate an operation from a mempool with default parameters set
+ *
+ * @param mempool
+ *   Compress operation mempool
+ *
+ * @return
+ * - On success returns a valid rte_comp_op structure
+ * - On failure returns NULL
+ */
+static inline struct rte_comp_op *
+rte_comp_op_alloc(struct rte_mempool *mempool)
+{
+	struct rte_comp_op *op = NULL;
+	int retval;
+
+	retval = __rte_comp_op_raw_bulk_alloc(mempool, &op, 1);
+	if (unlikely(retval != 1))
+		return NULL;
+
+	__rte_comp_op_reset(op);
+
+	return op;
+}
+
+
+/**
+ * Bulk allocate operations from a mempool with default parameters set
+ *
+ * @param mempool
+ *   Compress operation mempool
+ * @param ops
+ *   Array to place allocated operations
+ * @param nb_ops
+ *   Number of operations to allocate
+ * @return
+ * - nb_ops if the number of operations requested were allocated.
+ * - 0 if the requested number of ops are not available.
+ *   None are allocated in this case.
+ */
+static inline unsigned
+rte_comp_op_bulk_alloc(struct rte_mempool *mempool,
+		struct rte_comp_op **ops, uint16_t nb_ops)
+{
+	int i;
+
+	if (unlikely(__rte_comp_op_raw_bulk_alloc(mempool, ops, nb_ops)
+			!= nb_ops))
+		return 0;
+
+	for (i = 0; i < nb_ops; i++)
+		__rte_comp_op_reset(ops[i]);
+
+	return nb_ops;
+}
+
+
+
+/**
+ * Returns a pointer to the private user data of an operation if
+ * that operation has enough capacity for requested size.
+ *
+ * @param op
+ *   Compress operation
+ * @param size
+ *   Size of space requested in private data
+ * @return
+ * - if sufficient space available returns pointer to start of user data
+ * - if insufficient space returns NULL
+ */
+static inline void *
+__rte_comp_op_get_user_data(struct rte_comp_op *op, uint32_t size)
+{
+	uint32_t user_size;
+
+	if (likely(op->mempool != NULL)) {
+		user_size = __rte_comp_op_get_user_data_size(op->mempool);
+
+		if (likely(user_size >= size))
+			return (void *)(op + 1);
+
+	}
+
+	return NULL;
+}
+
+/**
+ * free operation structure
+ * If operation has been allocate from a rte_mempool, then the operation will
+ * be returned to the mempool.
+ *
+ * @param op
+ *   Compress operation
+ */
+static inline void
+rte_comp_op_free(struct rte_comp_op *op)
+{
+	if (op != NULL && op->mempool != NULL)
+		rte_mempool_put(op->mempool, op);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_COMP_H_ */
-- 
2.7.4