DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jianfeng Tan <jianfeng.tan@intel.com>
To: dev@dpdk.org
Cc: thomas@monjalon.net, Jianfeng Tan <jianfeng.tan@intel.com>
Subject: [dpdk-dev] [PATCH v2 5/5] drivers/net: share vdev data to secondary process
Date: Thu,  5 Apr 2018 17:45:03 +0000	[thread overview]
Message-ID: <1522950303-17206-6-git-send-email-jianfeng.tan@intel.com> (raw)
In-Reply-To: <1522950303-17206-1-git-send-email-jianfeng.tan@intel.com>

dpdk-procinfo, as a secondary process, cannot fetch stats for vdev.

This patch enables that by attaching the port from the shared data.
We also fill the eth dev ops, with only some ops works in secondary
process, for example, stats_get().

Note that, we still cannot Rx/Tx packets on the ports which do not
support multi-process.

Reported-by: Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
---
 drivers/net/af_packet/rte_eth_af_packet.c | 17 +++++++++++++++--
 drivers/net/bonding/rte_eth_bond_pmd.c    | 13 +++++++++++++
 drivers/net/failsafe/failsafe.c           | 14 ++++++++++++++
 drivers/net/kni/rte_eth_kni.c             | 12 ++++++++++++
 drivers/net/null/rte_eth_null.c           | 13 +++++++++++++
 drivers/net/octeontx/octeontx_ethdev.c    | 14 ++++++++++++++
 drivers/net/pcap/rte_eth_pcap.c           | 13 +++++++++++++
 drivers/net/softnic/rte_eth_softnic.c     | 19 ++++++++++++++++---
 drivers/net/tap/rte_eth_tap.c             | 13 +++++++++++++
 drivers/net/vhost/rte_eth_vhost.c         | 17 +++++++++++++++--
 10 files changed, 138 insertions(+), 7 deletions(-)

diff --git a/drivers/net/af_packet/rte_eth_af_packet.c b/drivers/net/af_packet/rte_eth_af_packet.c
index 110e8a5..b394d3c 100644
--- a/drivers/net/af_packet/rte_eth_af_packet.c
+++ b/drivers/net/af_packet/rte_eth_af_packet.c
@@ -915,9 +915,22 @@ rte_pmd_af_packet_probe(struct rte_vdev_device *dev)
 	int ret = 0;
 	struct rte_kvargs *kvlist;
 	int sockfd = -1;
+	struct rte_eth_dev *eth_dev;
+	const char *name = rte_vdev_device_name(dev);
+
+	RTE_LOG(INFO, PMD, "Initializing pmd_af_packet for %s\n", name);
 
-	RTE_LOG(INFO, PMD, "Initializing pmd_af_packet for %s\n",
-		rte_vdev_device_name(dev));
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY &&
+	    strlen(rte_vdev_device_args(dev)) == 0) {
+		eth_dev = rte_eth_dev_attach_secondary(name);
+		if (!eth_dev) {
+			RTE_LOG(ERR, PMD, "Failed to probe %s\n", name);
+			return -1;
+		}
+		/* TODO: request info from primary to set up Rx and Tx */
+		eth_dev->dev_ops = &ops;
+		return 0;
+	}
 
 	kvlist = rte_kvargs_parse(rte_vdev_device_args(dev), valid_arguments);
 	if (kvlist == NULL) {
diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
index 9b02850..d820ff6 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -3003,6 +3003,7 @@ bond_probe(struct rte_vdev_device *dev)
 	uint8_t bonding_mode, socket_id/*, agg_mode*/;
 	int  arg_count, port_id;
 	uint8_t agg_mode;
+	struct rte_eth_dev *eth_dev;
 
 	if (!dev)
 		return -EINVAL;
@@ -3010,6 +3011,18 @@ bond_probe(struct rte_vdev_device *dev)
 	name = rte_vdev_device_name(dev);
 	RTE_LOG(INFO, EAL, "Initializing pmd_bond for %s\n", name);
 
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY &&
+	    strlen(rte_vdev_device_args(dev)) == 0) {
+		eth_dev = rte_eth_dev_attach_secondary(name);
+		if (!eth_dev) {
+			RTE_LOG(ERR, PMD, "Failed to probe %s\n", name);
+			return -1;
+		}
+		/* TODO: request info from primary to set up Rx and Tx */
+		eth_dev->dev_ops = &default_dev_ops;
+		return 0;
+	}
+
 	kvlist = rte_kvargs_parse(rte_vdev_device_args(dev),
 		pmd_bond_init_valid_arguments);
 	if (kvlist == NULL)
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index c499bfb..ea9fdc6 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -294,10 +294,24 @@ static int
 rte_pmd_failsafe_probe(struct rte_vdev_device *vdev)
 {
 	const char *name;
+	struct rte_eth_dev *eth_dev;
 
 	name = rte_vdev_device_name(vdev);
 	INFO("Initializing " FAILSAFE_DRIVER_NAME " for %s",
 			name);
+
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY &&
+	    strlen(rte_vdev_device_args(vdev)) == 0) {
+		eth_dev = rte_eth_dev_attach_secondary(name);
+		if (!eth_dev) {
+			RTE_LOG(ERR, PMD, "Failed to probe %s\n", name);
+			return -1;
+		}
+		/* TODO: request info from primary to set up Rx and Tx */
+		eth_dev->dev_ops = &failsafe_ops;
+		return 0;
+	}
+
 	return fs_eth_dev_create(vdev);
 }
 
diff --git a/drivers/net/kni/rte_eth_kni.c b/drivers/net/kni/rte_eth_kni.c
index 6d1a29b..69e4920 100644
--- a/drivers/net/kni/rte_eth_kni.c
+++ b/drivers/net/kni/rte_eth_kni.c
@@ -405,6 +405,18 @@ eth_kni_probe(struct rte_vdev_device *vdev)
 	params = rte_vdev_device_args(vdev);
 	RTE_LOG(INFO, PMD, "Initializing eth_kni for %s\n", name);
 
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY &&
+	    strlen(params) == 0) {
+		eth_dev = rte_eth_dev_attach_secondary(name);
+		if (!eth_dev) {
+			RTE_LOG(ERR, PMD, "Failed to probe %s\n", name);
+			return -1;
+		}
+		/* TODO: request info from primary to set up Rx and Tx */
+		eth_dev->dev_ops = &eth_kni_ops;
+		return 0;
+	}
+
 	ret = eth_kni_kvargs_process(&args, params);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/net/null/rte_eth_null.c b/drivers/net/null/rte_eth_null.c
index 0c7beb8..a2278d6 100644
--- a/drivers/net/null/rte_eth_null.c
+++ b/drivers/net/null/rte_eth_null.c
@@ -596,6 +596,7 @@ rte_pmd_null_probe(struct rte_vdev_device *dev)
 	unsigned packet_size = default_packet_size;
 	unsigned packet_copy = default_packet_copy;
 	struct rte_kvargs *kvlist = NULL;
+	struct rte_eth_dev *eth_dev;
 	int ret;
 
 	if (!dev)
@@ -605,6 +606,18 @@ rte_pmd_null_probe(struct rte_vdev_device *dev)
 	params = rte_vdev_device_args(dev);
 	RTE_LOG(INFO, PMD, "Initializing pmd_null for %s\n", name);
 
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY &&
+	    strlen(params) == 0) {
+		eth_dev = rte_eth_dev_attach_secondary(name);
+		if (!eth_dev) {
+			RTE_LOG(ERR, PMD, "Failed to probe %s\n", name);
+			return -1;
+		}
+		/* TODO: request info from primary to set up Rx and Tx */
+		eth_dev->dev_ops = &ops;
+		return 0;
+	}
+
 	if (params != NULL) {
 		kvlist = rte_kvargs_parse(params, valid_arguments);
 		if (kvlist == NULL)
diff --git a/drivers/net/octeontx/octeontx_ethdev.c b/drivers/net/octeontx/octeontx_ethdev.c
index 0df1735..0a32026 100644
--- a/drivers/net/octeontx/octeontx_ethdev.c
+++ b/drivers/net/octeontx/octeontx_ethdev.c
@@ -1185,12 +1185,26 @@ octeontx_probe(struct rte_vdev_device *dev)
 	struct rte_event_dev_config dev_conf;
 	const char *eventdev_name = "event_octeontx";
 	struct rte_event_dev_info info;
+	struct rte_eth_dev *eth_dev;
 
 	struct octeontx_vdev_init_params init_params = {
 		OCTEONTX_VDEV_DEFAULT_MAX_NR_PORT
 	};
 
 	dev_name = rte_vdev_device_name(dev);
+
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY &&
+	    strlen(rte_vdev_device_args(dev)) == 0) {
+		eth_dev = rte_eth_dev_attach_secondary(dev_name);
+		if (!eth_dev) {
+			RTE_LOG(ERR, PMD, "Failed to probe %s\n", dev_name);
+			return -1;
+		}
+		/* TODO: request info from primary to set up Rx and Tx */
+		eth_dev->dev_ops = &octeontx_dev_ops;
+		return 0;
+	}
+
 	res = octeontx_parse_vdev_init_params(&init_params, dev);
 	if (res < 0)
 		return -EINVAL;
diff --git a/drivers/net/pcap/rte_eth_pcap.c b/drivers/net/pcap/rte_eth_pcap.c
index 8740d52..570c9e9 100644
--- a/drivers/net/pcap/rte_eth_pcap.c
+++ b/drivers/net/pcap/rte_eth_pcap.c
@@ -898,6 +898,7 @@ pmd_pcap_probe(struct rte_vdev_device *dev)
 	struct rte_kvargs *kvlist;
 	struct pmd_devargs pcaps = {0};
 	struct pmd_devargs dumpers = {0};
+	struct rte_eth_dev *eth_dev;
 	int single_iface = 0;
 	int ret;
 
@@ -908,6 +909,18 @@ pmd_pcap_probe(struct rte_vdev_device *dev)
 	start_cycles = rte_get_timer_cycles();
 	hz = rte_get_timer_hz();
 
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY &&
+	    strlen(rte_vdev_device_args(dev)) == 0) {
+		eth_dev = rte_eth_dev_attach_secondary(name);
+		if (!eth_dev) {
+			RTE_LOG(ERR, PMD, "Failed to probe %s\n", name);
+			return -1;
+		}
+		/* TODO: request info from primary to set up Rx and Tx */
+		eth_dev->dev_ops = &ops;
+		return 0;
+	}
+
 	kvlist = rte_kvargs_parse(rte_vdev_device_args(dev), valid_arguments);
 	if (kvlist == NULL)
 		return -1;
diff --git a/drivers/net/softnic/rte_eth_softnic.c b/drivers/net/softnic/rte_eth_softnic.c
index b0c1341..e324394 100644
--- a/drivers/net/softnic/rte_eth_softnic.c
+++ b/drivers/net/softnic/rte_eth_softnic.c
@@ -725,13 +725,26 @@ pmd_probe(struct rte_vdev_device *vdev)
 	uint16_t hard_port_id;
 	int numa_node;
 	void *dev_private;
+	struct rte_eth_dev *eth_dev;
+	const char *name = rte_vdev_device_name(vdev);
 
-	RTE_LOG(INFO, PMD,
-		"Probing device \"%s\"\n",
-		rte_vdev_device_name(vdev));
+	RTE_LOG(INFO, PMD, "Probing device \"%s\"\n", name);
 
 	/* Parse input arguments */
 	params = rte_vdev_device_args(vdev);
+
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY &&
+	    strlen(params) == 0) {
+		eth_dev = rte_eth_dev_attach_secondary(name);
+		if (!eth_dev) {
+			RTE_LOG(ERR, PMD, "Failed to probe %s\n", name);
+			return -1;
+		}
+		/* TODO: request info from primary to set up Rx and Tx */
+		eth_dev->dev_ops = &pmd_ops;
+		return 0;
+	}
+
 	if (!params)
 		return -EINVAL;
 
diff --git a/drivers/net/tap/rte_eth_tap.c b/drivers/net/tap/rte_eth_tap.c
index 7ad117d..e2da324 100644
--- a/drivers/net/tap/rte_eth_tap.c
+++ b/drivers/net/tap/rte_eth_tap.c
@@ -1626,10 +1626,23 @@ rte_pmd_tap_probe(struct rte_vdev_device *dev)
 	char tap_name[RTE_ETH_NAME_MAX_LEN];
 	char remote_iface[RTE_ETH_NAME_MAX_LEN];
 	struct ether_addr user_mac = { .addr_bytes = {0} };
+	struct rte_eth_dev *eth_dev;
 
 	name = rte_vdev_device_name(dev);
 	params = rte_vdev_device_args(dev);
 
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY &&
+	    strlen(params) == 0) {
+		eth_dev = rte_eth_dev_attach_secondary(name);
+		if (!eth_dev) {
+			RTE_LOG(ERR, PMD, "Failed to probe %s\n", name);
+			return -1;
+		}
+		/* TODO: request info from primary to set up Rx and Tx */
+		eth_dev->dev_ops = &ops;
+		return 0;
+	}
+
 	speed = ETH_SPEED_NUM_10G;
 	snprintf(tap_name, sizeof(tap_name), "%s%d",
 		 DEFAULT_TAP_NAME, tap_unit++);
diff --git a/drivers/net/vhost/rte_eth_vhost.c b/drivers/net/vhost/rte_eth_vhost.c
index 2aebe36..1267047 100644
--- a/drivers/net/vhost/rte_eth_vhost.c
+++ b/drivers/net/vhost/rte_eth_vhost.c
@@ -1174,9 +1174,22 @@ rte_pmd_vhost_probe(struct rte_vdev_device *dev)
 	int client_mode = 0;
 	int dequeue_zero_copy = 0;
 	int iommu_support = 0;
+	struct rte_eth_dev *eth_dev;
+	const char *name = rte_vdev_device_name(dev);
+
+	RTE_LOG(INFO, PMD, "Initializing pmd_vhost for %s\n", name);
 
-	RTE_LOG(INFO, PMD, "Initializing pmd_vhost for %s\n",
-		rte_vdev_device_name(dev));
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY &&
+	    strlen(rte_vdev_device_args(dev)) == 0) {
+		eth_dev = rte_eth_dev_attach_secondary(name);
+		if (!eth_dev) {
+			RTE_LOG(ERR, PMD, "Failed to probe %s\n", name);
+			return -1;
+		}
+		/* TODO: request info from primary to set up Rx and Tx */
+		eth_dev->dev_ops = &ops;
+		return 0;
+	}
 
 	kvlist = rte_kvargs_parse(rte_vdev_device_args(dev), valid_arguments);
 	if (kvlist == NULL)
-- 
2.7.4

  parent reply	other threads:[~2018-04-05 17:43 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-05 17:44 [dpdk-dev] [PATCH v2 0/5] allow procinfo and pdump on eth vdev Jianfeng Tan
2018-04-05 17:44 ` [dpdk-dev] [PATCH v2 1/5] eal: bring forward multi-process channel init Jianfeng Tan
2018-04-05 17:45 ` [dpdk-dev] [PATCH v2 2/5] bus/vdev: add lock on vdev device list Jianfeng Tan
2018-04-05 17:45 ` [dpdk-dev] [PATCH v2 3/5] bus/vdev: bus scan by multi-process channel Jianfeng Tan
2018-04-05 17:45 ` [dpdk-dev] [PATCH v2 4/5] drivers/net: not use private eth dev data Jianfeng Tan
2018-04-05 17:45 ` Jianfeng Tan [this message]
2018-04-12 23:30 ` [dpdk-dev] [PATCH v2 0/5] allow procinfo and pdump on eth vdev Thomas Monjalon
2018-04-13 14:39   ` Tan, Jianfeng
2018-04-17  2:24 ` Zhang, Qi Z

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1522950303-17206-6-git-send-email-jianfeng.tan@intel.com \
    --to=jianfeng.tan@intel.com \
    --cc=dev@dpdk.org \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).