DPDK patches and discussions
 help / color / mirror / Atom feed
From: Junjie Chen <junjie.j.chen@intel.com>
To: jianfeng.tan@intel.com, maxime.coquelin@redhat.com, mtetsuyah@gmail.com
Cc: dev@dpdk.org, Junjie Chen <junjie.j.chen@intel.com>
Subject: [dpdk-dev] [PATCH v3] net/vhost: fix vhost invalid state
Date: Wed, 11 Apr 2018 13:02:32 -0400	[thread overview]
Message-ID: <1523466152-181190-1-git-send-email-junjie.j.chen@intel.com> (raw)
In-Reply-To: <1523443993-176139-1-git-send-email-junjie.j.chen@intel.com>

dev_start sets *dev_attached* after setup queues, this sets device to
invalid state since no frontend is attached. Also destroy_device set
*started* to zero which makes *allow_queuing* always zero until dev_start
get called again. Actually, we should not determine queues existence by
*dev_attached* but by queues pointers or other separated variable(s).

Fixes: 30a701a53737 ("net/vhost: fix crash when creating vdev
dynamically")

Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Tested-by: Jens Freimann <jfreimann@redhat.com>
---
Changes in v3:
- remove useless log in queue status showing
Changes in v2:
- use started to determine vhost queues readiness
- revert setting started to zero in destroy_device
 drivers/net/vhost/rte_eth_vhost.c | 59 +++++++++++++++++++--------------------
 1 file changed, 29 insertions(+), 30 deletions(-)

diff --git a/drivers/net/vhost/rte_eth_vhost.c b/drivers/net/vhost/rte_eth_vhost.c
index 11b6076..e392d71 100644
--- a/drivers/net/vhost/rte_eth_vhost.c
+++ b/drivers/net/vhost/rte_eth_vhost.c
@@ -528,10 +528,11 @@ update_queuing_status(struct rte_eth_dev *dev)
 	unsigned int i;
 	int allow_queuing = 1;
 
-	if (rte_atomic32_read(&internal->dev_attached) == 0)
+	if (!dev->data->rx_queues || !dev->data->tx_queues)
 		return;
 
-	if (rte_atomic32_read(&internal->started) == 0)
+	if (rte_atomic32_read(&internal->started) == 0 ||
+	    rte_atomic32_read(&internal->dev_attached) == 0)
 		allow_queuing = 0;
 
 	/* Wait until rx/tx_pkt_burst stops accessing vhost device */
@@ -607,13 +608,10 @@ new_device(int vid)
 #endif
 
 	internal->vid = vid;
-	if (eth_dev->data->rx_queues && eth_dev->data->tx_queues) {
+	if (rte_atomic32_read(&internal->started) == 1)
 		queue_setup(eth_dev, internal);
-		rte_atomic32_set(&internal->dev_attached, 1);
-	} else {
-		RTE_LOG(INFO, PMD, "RX/TX queues have not setup yet\n");
-		rte_atomic32_set(&internal->dev_attached, 0);
-	}
+	else
+		RTE_LOG(INFO, PMD, "RX/TX queues not exist yet\n");
 
 	for (i = 0; i < rte_vhost_get_vring_num(vid); i++)
 		rte_vhost_enable_guest_notification(vid, i, 0);
@@ -622,6 +620,7 @@ new_device(int vid)
 
 	eth_dev->data->dev_link.link_status = ETH_LINK_UP;
 
+	rte_atomic32_set(&internal->dev_attached, 1);
 	update_queuing_status(eth_dev);
 
 	RTE_LOG(INFO, PMD, "Vhost device %d created\n", vid);
@@ -651,23 +650,24 @@ destroy_device(int vid)
 	eth_dev = list->eth_dev;
 	internal = eth_dev->data->dev_private;
 
-	rte_atomic32_set(&internal->started, 0);
-	update_queuing_status(eth_dev);
 	rte_atomic32_set(&internal->dev_attached, 0);
+	update_queuing_status(eth_dev);
 
 	eth_dev->data->dev_link.link_status = ETH_LINK_DOWN;
 
-	for (i = 0; i < eth_dev->data->nb_rx_queues; i++) {
-		vq = eth_dev->data->rx_queues[i];
-		if (vq == NULL)
-			continue;
-		vq->vid = -1;
-	}
-	for (i = 0; i < eth_dev->data->nb_tx_queues; i++) {
-		vq = eth_dev->data->tx_queues[i];
-		if (vq == NULL)
-			continue;
-		vq->vid = -1;
+	if (eth_dev->data->rx_queues && eth_dev->data->tx_queues) {
+		for (i = 0; i < eth_dev->data->nb_rx_queues; i++) {
+			vq = eth_dev->data->rx_queues[i];
+			if (!vq)
+				continue;
+			vq->vid = -1;
+		}
+		for (i = 0; i < eth_dev->data->nb_tx_queues; i++) {
+			vq = eth_dev->data->tx_queues[i];
+			if (!vq)
+				continue;
+			vq->vid = -1;
+		}
 	}
 
 	state = vring_states[eth_dev->data->port_id];
@@ -792,11 +792,7 @@ eth_dev_start(struct rte_eth_dev *eth_dev)
 {
 	struct pmd_internal *internal = eth_dev->data->dev_private;
 
-	if (unlikely(rte_atomic32_read(&internal->dev_attached) == 0)) {
-		queue_setup(eth_dev, internal);
-		rte_atomic32_set(&internal->dev_attached, 1);
-	}
-
+	queue_setup(eth_dev, internal);
 	rte_atomic32_set(&internal->started, 1);
 	update_queuing_status(eth_dev);
 
@@ -836,10 +832,13 @@ eth_dev_close(struct rte_eth_dev *dev)
 	pthread_mutex_unlock(&internal_list_lock);
 	rte_free(list);
 
-	for (i = 0; i < dev->data->nb_rx_queues; i++)
-		rte_free(dev->data->rx_queues[i]);
-	for (i = 0; i < dev->data->nb_tx_queues; i++)
-		rte_free(dev->data->tx_queues[i]);
+	if (dev->data->rx_queues)
+		for (i = 0; i < dev->data->nb_rx_queues; i++)
+			rte_free(dev->data->rx_queues[i]);
+
+	if (dev->data->tx_queues)
+		for (i = 0; i < dev->data->nb_tx_queues; i++)
+			rte_free(dev->data->tx_queues[i]);
 
 	rte_free(dev->data->mac_addrs);
 	free(internal->dev_name);
-- 
2.0.1

  parent reply	other threads:[~2018-04-11  9:24 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-10 14:18 [dpdk-dev] [PATCH] " Junjie Chen
2018-04-10  9:39 ` Tan, Jianfeng
2018-04-10 11:13 ` Jens Freimann
2018-04-11  2:54   ` Chen, Junjie J
2018-04-11 10:53 ` [dpdk-dev] [PATCH v2] " Junjie Chen
2018-04-11  8:11   ` Tan, Jianfeng
2018-04-11  8:35     ` Chen, Junjie J
2018-04-11  9:00       ` Tan, Jianfeng
2018-04-11  9:17         ` Chen, Junjie J
2018-04-11  9:08   ` Jens Freimann
2018-04-11 17:02   ` Junjie Chen [this message]
2018-04-12  7:21     ` [dpdk-dev] [PATCH v3] " Tan, Jianfeng
2018-04-12  7:29       ` Maxime Coquelin
2018-04-12  7:34         ` Chen, Junjie J
2018-04-12  7:35           ` Maxime Coquelin
2018-04-12  7:40             ` Maxime Coquelin
2018-04-12  7:36         ` Tan, Jianfeng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1523466152-181190-1-git-send-email-junjie.j.chen@intel.com \
    --to=junjie.j.chen@intel.com \
    --cc=dev@dpdk.org \
    --cc=jianfeng.tan@intel.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=mtetsuyah@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).