[dpdk-dev] [PATCH v4 5/5] net/i40e: add module EEPROM callbacks for i40e

[Zijie Pan <zijie.pan@6wind.com>]

Add new callbacks for eth_dev_ops of i40e to get the information
and data of plugin module eeprom.

Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
---
Cc: beilei.xing@intel.com
Cc: qi.z.zhang@intel.com

 drivers/net/i40e/i40e_ethdev.c |  147 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 147 insertions(+)

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 180ac74..1a24cd7 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -369,6 +369,11 @@ static int i40e_get_regs(struct rte_eth_dev *dev,
 static int i40e_get_eeprom(struct rte_eth_dev *dev,
 			   struct rte_dev_eeprom_info *eeprom);
 
+static int i40e_get_module_info(struct rte_eth_dev *dev,
+				struct rte_dev_module_info *modinfo);
+static int i40e_get_module_eeprom(struct rte_eth_dev *dev,
+				  struct rte_dev_eeprom_info *info);
+
 static int i40e_set_default_mac_addr(struct rte_eth_dev *dev,
 				      struct ether_addr *mac_addr);
 
@@ -489,6 +494,8 @@ static int i40e_sw_tunnel_filter_insert(struct i40e_pf *pf,
 	.get_reg                      = i40e_get_regs,
 	.get_eeprom_length            = i40e_get_eeprom_length,
 	.get_eeprom                   = i40e_get_eeprom,
+	.get_module_info              = i40e_get_module_info,
+	.get_module_eeprom            = i40e_get_module_eeprom,
 	.mac_addr_set                 = i40e_set_default_mac_addr,
 	.mtu_set                      = i40e_dev_mtu_set,
 	.tm_ops_get                   = i40e_tm_ops_get,
@@ -11327,6 +11334,146 @@ static int i40e_get_eeprom(struct rte_eth_dev *dev,
 	return 0;
 }
 
+static int i40e_get_module_info(struct rte_eth_dev *dev,
+				struct rte_dev_module_info *modinfo)
+{
+	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	uint32_t sff8472_comp = 0;
+	uint32_t sff8472_swap = 0;
+	uint32_t sff8636_rev = 0;
+	i40e_status status;
+	uint32_t type = 0;
+
+	/* Check if firmware supports reading module EEPROM. */
+	if (!(hw->flags & I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE)) {
+		PMD_DRV_LOG(ERR,
+			    "Module EEPROM memory read not supported. "
+			    "Please update the NVM image.\n");
+		return -EINVAL;
+	}
+
+	status = i40e_update_link_info(hw);
+	if (status)
+		return -EIO;
+
+	if (hw->phy.link_info.phy_type == I40E_PHY_TYPE_EMPTY) {
+		PMD_DRV_LOG(ERR,
+			    "Cannot read module EEPROM memory. "
+			    "No module connected.\n");
+		return -EINVAL;
+	}
+
+	type = hw->phy.link_info.module_type[0];
+
+	switch (type) {
+	case I40E_MODULE_TYPE_SFP:
+		status = i40e_aq_get_phy_register(hw,
+				I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
+				I40E_I2C_EEPROM_DEV_ADDR,
+				I40E_MODULE_SFF_8472_COMP,
+				&sff8472_comp, NULL);
+		if (status)
+			return -EIO;
+
+		status = i40e_aq_get_phy_register(hw,
+				I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
+				I40E_I2C_EEPROM_DEV_ADDR,
+				I40E_MODULE_SFF_8472_SWAP,
+				&sff8472_swap, NULL);
+		if (status)
+			return -EIO;
+
+		/* Check if the module requires address swap to access
+		 * the other EEPROM memory page.
+		 */
+		if (sff8472_swap & I40E_MODULE_SFF_ADDR_MODE) {
+			PMD_DRV_LOG(WARNING,
+				    "Module address swap to access "
+				    "page 0xA2 is not supported.\n");
+			modinfo->type = RTE_ETH_MODULE_SFF_8079;
+			modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8079_LEN;
+		} else if (sff8472_comp == 0x00) {
+			/* Module is not SFF-8472 compliant */
+			modinfo->type = RTE_ETH_MODULE_SFF_8079;
+			modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8079_LEN;
+		} else {
+			modinfo->type = RTE_ETH_MODULE_SFF_8472;
+			modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8472_LEN;
+		}
+		break;
+	case I40E_MODULE_TYPE_QSFP_PLUS:
+		/* Read from memory page 0. */
+		status = i40e_aq_get_phy_register(hw,
+				I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
+				0,
+				I40E_MODULE_REVISION_ADDR,
+				&sff8636_rev, NULL);
+		if (status)
+			return -EIO;
+		/* Determine revision compliance byte */
+		if (sff8636_rev > 0x02) {
+			/* Module is SFF-8636 compliant */
+			modinfo->type = RTE_ETH_MODULE_SFF_8636;
+			modinfo->eeprom_len = I40E_MODULE_QSFP_MAX_LEN;
+		} else {
+			modinfo->type = RTE_ETH_MODULE_SFF_8436;
+			modinfo->eeprom_len = I40E_MODULE_QSFP_MAX_LEN;
+		}
+		break;
+	case I40E_MODULE_TYPE_QSFP28:
+		modinfo->type = RTE_ETH_MODULE_SFF_8636;
+		modinfo->eeprom_len = I40E_MODULE_QSFP_MAX_LEN;
+		break;
+	default:
+		PMD_DRV_LOG(ERR, "Module type unrecognized\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int i40e_get_module_eeprom(struct rte_eth_dev *dev,
+				  struct rte_dev_eeprom_info *info)
+{
+	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	bool is_sfp = false;
+	i40e_status status;
+	uint8_t *data = info->data;
+	uint32_t value = 0;
+	uint32_t i;
+
+	if (!info || !info->length || !data)
+		return -EINVAL;
+
+	if (hw->phy.link_info.module_type[0] == I40E_MODULE_TYPE_SFP)
+		is_sfp = true;
+
+	for (i = 0; i < info->length; i++) {
+		u32 offset = i + info->offset;
+		u32 addr = is_sfp ? I40E_I2C_EEPROM_DEV_ADDR : 0;
+
+		/* Check if we need to access the other memory page */
+		if (is_sfp) {
+			if (offset >= RTE_ETH_MODULE_SFF_8079_LEN) {
+				offset -= RTE_ETH_MODULE_SFF_8079_LEN;
+				addr = I40E_I2C_EEPROM_DEV_ADDR2;
+			}
+		} else {
+			while (offset >= RTE_ETH_MODULE_SFF_8436_LEN) {
+				/* Compute memory page number and offset. */
+				offset -= RTE_ETH_MODULE_SFF_8436_LEN / 2;
+				addr++;
+			}
+		}
+		status = i40e_aq_get_phy_register(hw,
+				I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
+				addr, offset, &value, NULL);
+		if (status)
+			return -EIO;
+		data[i] = (uint8_t)value;
+	}
+	return 0;
+}
+
 static int i40e_set_default_mac_addr(struct rte_eth_dev *dev,
 				     struct ether_addr *mac_addr)
 {
-- 
1.7.10.4