From: Fiona Trahe <fiona.trahe@intel.com>
To: dev@dpdk.org
Cc: pablo.de.lara.guarch@intel.com, fiona.trahe@intel.com,
tomaszx.jozwiak@intel.com
Subject: [dpdk-dev] [PATCH v2 13/31] crypto/qat: remove dependencies on cryptodev from common
Date: Fri, 11 May 2018 12:13:51 +0100 [thread overview]
Message-ID: <1526037249-25545-14-git-send-email-fiona.trahe@intel.com> (raw)
In-Reply-To: <1523040732-3290-1-git-send-email-fiona.trahe@intel.com>
Remove dependence on rte_cryptodev from common qp code
to facilitate being used by other device types in future.
Transferred required data into qat-specific structures.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
drivers/crypto/qat/qat_device.h | 11 +++++-
drivers/crypto/qat/qat_qp.c | 67 +++++++++++++++++++---------------
drivers/crypto/qat/qat_qp.h | 8 +++-
drivers/crypto/qat/qat_sym.c | 15 +++++---
drivers/crypto/qat/rte_qat_cryptodev.c | 4 +-
5 files changed, 66 insertions(+), 39 deletions(-)
diff --git a/drivers/crypto/qat/qat_device.h b/drivers/crypto/qat/qat_device.h
index 2cb8e7612..64706abae 100644
--- a/drivers/crypto/qat/qat_device.h
+++ b/drivers/crypto/qat/qat_device.h
@@ -14,7 +14,11 @@ extern uint8_t cryptodev_qat_driver_id;
extern int qat_sym_qp_release(struct rte_cryptodev *dev,
uint16_t queue_pair_id);
-/** private data structure for each QAT device */
+/** private data structure for each QAT device.
+ * In this context a QAT device is a device offering only one service,
+ * so there can be more than 1 device on a pci_dev (VF),
+ * one for symmetric crypto, one for compression
+ */
struct qat_pmd_private {
unsigned int max_nb_queue_pairs;
/**< Max number of queue pairs supported by device */
@@ -23,6 +27,11 @@ struct qat_pmd_private {
enum qat_device_gen qat_dev_gen;
/**< QAT device generation */
const struct rte_cryptodev_capabilities *qat_dev_capabilities;
+ /* QAT device capabilities */
+ struct rte_pci_device *pci_dev;
+ /**< PCI information. */
+ uint8_t dev_id;
+ /**< Device ID for this instance */
};
int qat_dev_config(struct rte_cryptodev *dev,
diff --git a/drivers/crypto/qat/qat_qp.c b/drivers/crypto/qat/qat_qp.c
index d1d2be34f..b831ab420 100644
--- a/drivers/crypto/qat/qat_qp.c
+++ b/drivers/crypto/qat/qat_qp.c
@@ -6,7 +6,6 @@
#include <rte_dev.h>
#include <rte_malloc.h>
#include <rte_memzone.h>
-#include <rte_cryptodev_pmd.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
#include <rte_atomic.h>
@@ -31,7 +30,7 @@
static int qat_qp_check_queue_alignment(uint64_t phys_addr,
uint32_t queue_size_bytes);
static void qat_queue_delete(struct qat_queue *queue);
-static int qat_queue_create(struct rte_cryptodev *dev,
+static int qat_queue_create(struct qat_pmd_private *qat_dev,
struct qat_queue *queue, struct qat_qp_config *, uint8_t dir);
static int adf_verify_queue_size(uint32_t msg_size, uint32_t msg_num,
uint32_t *queue_size_for_csr);
@@ -70,14 +69,19 @@ queue_dma_zone_reserve(const char *queue_name, uint32_t queue_size,
socket_id, RTE_MEMZONE_IOVA_CONTIG, queue_size);
}
-int qat_qp_setup(struct rte_cryptodev *dev, uint16_t queue_pair_id,
+int qat_qp_setup(struct qat_pmd_private *qat_dev,
+ struct qat_qp **qp_addr,
+ uint16_t queue_pair_id,
struct qat_qp_config *qat_qp_conf)
+
{
struct qat_qp *qp;
- struct rte_pci_device *pci_dev;
+ struct rte_pci_device *pci_dev = qat_dev->pci_dev;
char op_cookie_pool_name[RTE_RING_NAMESIZE];
uint32_t i;
+ PMD_DRV_LOG(DEBUG, "Setup qp %u on device %d gen %d",
+ queue_pair_id, qat_dev->dev_id, qat_dev->qat_dev_gen);
if ((qat_qp_conf->nb_descriptors > ADF_MAX_DESC) ||
(qat_qp_conf->nb_descriptors < ADF_MIN_DESC)) {
@@ -86,8 +90,6 @@ int qat_qp_setup(struct rte_cryptodev *dev, uint16_t queue_pair_id,
return -EINVAL;
}
- pci_dev = RTE_DEV_TO_PCI(dev->device);
-
if (pci_dev->mem_resource[0].addr == NULL) {
PMD_DRV_LOG(ERR, "Could not find VF config space "
"(UIO driver attached?).");
@@ -114,14 +116,14 @@ int qat_qp_setup(struct rte_cryptodev *dev, uint16_t queue_pair_id,
qp->mmap_bar_addr = pci_dev->mem_resource[0].addr;
qp->inflights16 = 0;
- if (qat_queue_create(dev, &(qp->tx_q), qat_qp_conf,
+ if (qat_queue_create(qat_dev, &(qp->tx_q), qat_qp_conf,
ADF_RING_DIR_TX) != 0) {
PMD_INIT_LOG(ERR, "Tx queue create failed "
"queue_pair_id=%u", queue_pair_id);
goto create_err;
}
- if (qat_queue_create(dev, &(qp->rx_q), qat_qp_conf,
+ if (qat_queue_create(qat_dev, &(qp->rx_q), qat_qp_conf,
ADF_RING_DIR_RX) != 0) {
PMD_DRV_LOG(ERR, "Rx queue create failed "
"queue_pair_id=%hu", queue_pair_id);
@@ -134,7 +136,7 @@ int qat_qp_setup(struct rte_cryptodev *dev, uint16_t queue_pair_id,
snprintf(op_cookie_pool_name, RTE_RING_NAMESIZE, "%s_%s_qp_op_%d_%hu",
pci_dev->driver->driver.name, qat_qp_conf->service_str,
- dev->data->dev_id, queue_pair_id);
+ qat_dev->dev_id, queue_pair_id);
qp->op_cookie_pool = rte_mempool_lookup(op_cookie_pool_name);
if (qp->op_cookie_pool == NULL)
@@ -156,13 +158,15 @@ int qat_qp_setup(struct rte_cryptodev *dev, uint16_t queue_pair_id,
}
}
- struct qat_pmd_private *internals
- = dev->data->dev_private;
- qp->qat_dev_gen = internals->qat_dev_gen;
+ qp->qat_dev_gen = qat_dev->qat_dev_gen;
qp->build_request = qat_qp_conf->build_request;
qp->process_response = qat_qp_conf->process_response;
+ qp->qat_dev = qat_dev;
+
+ PMD_DRV_LOG(DEBUG, "QP setup complete: id: %d, cookiepool: %s",
+ queue_pair_id, op_cookie_pool_name);
- dev->data->queue_pairs[queue_pair_id] = qp;
+ *qp_addr = qp;
return 0;
create_err:
@@ -170,10 +174,9 @@ int qat_qp_setup(struct rte_cryptodev *dev, uint16_t queue_pair_id,
return -EFAULT;
}
-int qat_qp_release(struct rte_cryptodev *dev, uint16_t queue_pair_id)
+int qat_qp_release(struct qat_qp **qp_addr)
{
- struct qat_qp *qp =
- (struct qat_qp *)dev->data->queue_pairs[queue_pair_id];
+ struct qat_qp *qp = *qp_addr;
uint32_t i;
PMD_INIT_FUNC_TRACE();
@@ -182,6 +185,9 @@ int qat_qp_release(struct rte_cryptodev *dev, uint16_t queue_pair_id)
return 0;
}
+ PMD_DRV_LOG(DEBUG, "Free qp on qat_pci device %d",
+ qp->qat_dev->dev_id);
+
/* Don't free memory if there are still responses to be processed */
if (qp->inflights16 == 0) {
qat_queue_delete(&(qp->tx_q));
@@ -200,13 +206,11 @@ int qat_qp_release(struct rte_cryptodev *dev, uint16_t queue_pair_id)
rte_free(qp->op_cookies);
rte_free(qp);
- dev->data->queue_pairs[queue_pair_id] = NULL;
+ *qp_addr = NULL;
return 0;
}
-
-
static void qat_queue_delete(struct qat_queue *queue)
{
const struct rte_memzone *mz;
@@ -216,6 +220,9 @@ static void qat_queue_delete(struct qat_queue *queue)
PMD_DRV_LOG(DEBUG, "Invalid queue");
return;
}
+ PMD_DRV_LOG(DEBUG, "Free ring %d, memzone: %s",
+ queue->hw_queue_number, queue->memz_name);
+
mz = rte_memzone_lookup(queue->memz_name);
if (mz != NULL) {
/* Write an unused pattern to the queue memory. */
@@ -231,13 +238,13 @@ static void qat_queue_delete(struct qat_queue *queue)
}
static int
-qat_queue_create(struct rte_cryptodev *dev, struct qat_queue *queue,
+qat_queue_create(struct qat_pmd_private *qat_dev, struct qat_queue *queue,
struct qat_qp_config *qp_conf, uint8_t dir)
{
uint64_t queue_base;
void *io_addr;
const struct rte_memzone *qp_mz;
- struct rte_pci_device *pci_dev;
+ struct rte_pci_device *pci_dev = qat_dev->pci_dev;
int ret = 0;
uint16_t desc_size = (dir == ADF_RING_DIR_TX ?
qp_conf->tx_msg_size : qp_conf->rx_msg_size);
@@ -252,15 +259,13 @@ qat_queue_create(struct rte_cryptodev *dev, struct qat_queue *queue,
return -EINVAL;
}
- pci_dev = RTE_DEV_TO_PCI(dev->device);
-
/*
* Allocate a memzone for the queue - create a unique name.
*/
snprintf(queue->memz_name, sizeof(queue->memz_name),
"%s_%s_%s_%d_%d_%d",
pci_dev->driver->driver.name, qp_conf->service_str,
- "qp_mem", dev->data->dev_id,
+ "qp_mem", qat_dev->dev_id,
queue->hw_bundle_number, queue->hw_queue_number);
qp_mz = queue_dma_zone_reserve(queue->memz_name, queue_size_bytes,
qp_conf->socket_id);
@@ -290,12 +295,6 @@ qat_queue_create(struct rte_cryptodev *dev, struct qat_queue *queue,
queue->max_inflights = ADF_MAX_INFLIGHTS(queue->queue_size,
ADF_BYTES_TO_MSG_SIZE(desc_size));
queue->modulo = ADF_RING_SIZE_MODULO(queue->queue_size);
- PMD_DRV_LOG(DEBUG, "RING: Name:%s, size in CSR: %u, in bytes %u,"
- " nb msgs %u, msg_size %u, max_inflights %u modulo %u",
- queue->memz_name,
- queue->queue_size, queue_size_bytes,
- qp_conf->nb_descriptors, desc_size,
- queue->max_inflights, queue->modulo);
if (queue->max_inflights < 2) {
PMD_DRV_LOG(ERR, "Invalid num inflights");
@@ -318,6 +317,14 @@ qat_queue_create(struct rte_cryptodev *dev, struct qat_queue *queue,
WRITE_CSR_RING_BASE(io_addr, queue->hw_bundle_number,
queue->hw_queue_number, queue_base);
+
+ PMD_DRV_LOG(DEBUG, "RING: Name:%s, size in CSR: %u, in bytes %u,"
+ " nb msgs %u, msg_size %u, max_inflights %u modulo %u",
+ queue->memz_name,
+ queue->queue_size, queue_size_bytes,
+ qp_conf->nb_descriptors, desc_size,
+ queue->max_inflights, queue->modulo);
+
return 0;
queue_create_err:
diff --git a/drivers/crypto/qat/qat_qp.h b/drivers/crypto/qat/qat_qp.h
index 0cdf37f61..7bd8fdcec 100644
--- a/drivers/crypto/qat/qat_qp.h
+++ b/drivers/crypto/qat/qat_qp.h
@@ -5,6 +5,7 @@
#define _QAT_QP_H_
#include "qat_common.h"
+#include "qat_device.h"
typedef int (*build_request_t)(void *op,
uint8_t *req, void *op_cookie,
@@ -69,6 +70,8 @@ struct qat_qp {
enum qat_device_gen qat_dev_gen;
build_request_t build_request;
process_response_t process_response;
+ struct qat_pmd_private *qat_dev;
+ /**< qat device this qp is on */
} __rte_cache_aligned;
uint16_t
@@ -78,9 +81,10 @@ uint16_t
qat_dequeue_op_burst(void *qp, void **ops, uint16_t nb_ops);
int
-qat_qp_release(struct rte_cryptodev *dev, uint16_t queue_pair_id);
+qat_qp_release(struct qat_qp **qp_addr);
int
-qat_qp_setup(struct rte_cryptodev *dev, uint16_t queue_pair_id,
+qat_qp_setup(struct qat_pmd_private *qat_dev,
+ struct qat_qp **qp_addr, uint16_t queue_pair_id,
struct qat_qp_config *qat_qp_conf);
#endif /* _QAT_QP_H_ */
diff --git a/drivers/crypto/qat/qat_sym.c b/drivers/crypto/qat/qat_sym.c
index 4f86f2258..8ab95ac43 100644
--- a/drivers/crypto/qat/qat_sym.c
+++ b/drivers/crypto/qat/qat_sym.c
@@ -809,7 +809,10 @@ void qat_sym_stats_reset(struct rte_cryptodev *dev)
int qat_sym_qp_release(struct rte_cryptodev *dev, uint16_t queue_pair_id)
{
- return qat_qp_release(dev, queue_pair_id);
+ PMD_DRV_LOG(DEBUG, "Release sym qp %u on device %d",
+ queue_pair_id, dev->data->dev_id);
+ return qat_qp_release((struct qat_qp **)
+ &(dev->data->queue_pairs[queue_pair_id]));
}
int qat_sym_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
@@ -820,9 +823,12 @@ int qat_sym_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
int ret = 0;
uint32_t i;
struct qat_qp_config qat_qp_conf;
+ struct qat_qp **qp_addr =
+ (struct qat_qp **)&(dev->data->queue_pairs[qp_id]);
+ struct qat_pmd_private *qat_private = dev->data->dev_private;
/* If qp is already in use free ring memory and qp metadata. */
- if (dev->data->queue_pairs[qp_id] != NULL) {
+ if (*qp_addr != NULL) {
ret = qat_sym_qp_release(dev, qp_id);
if (ret < 0)
return ret;
@@ -833,7 +839,6 @@ int qat_sym_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
return -EINVAL;
}
-
qat_qp_conf.hw_bundle_num = (qp_id/ADF_NUM_SYM_QPS_PER_BUNDLE);
qat_qp_conf.tx_ring_num = (qp_id%ADF_NUM_SYM_QPS_PER_BUNDLE) +
ADF_SYM_TX_QUEUE_STARTOFF;
@@ -848,11 +853,11 @@ int qat_sym_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
qat_qp_conf.socket_id = socket_id;
qat_qp_conf.service_str = "sym";
- ret = qat_qp_setup(dev, qp_id, &qat_qp_conf);
+ ret = qat_qp_setup(qat_private, qp_addr, qp_id, &qat_qp_conf);
if (ret != 0)
return ret;
- qp = (struct qat_qp *)dev->data->queue_pairs[qp_id];
+ qp = (struct qat_qp *)*qp_addr;
for (i = 0; i < qp->nb_descriptors; i++) {
diff --git a/drivers/crypto/qat/rte_qat_cryptodev.c b/drivers/crypto/qat/rte_qat_cryptodev.c
index 05cb5ef40..fe19b18b6 100644
--- a/drivers/crypto/qat/rte_qat_cryptodev.c
+++ b/drivers/crypto/qat/rte_qat_cryptodev.c
@@ -96,7 +96,9 @@ crypto_qat_create(const char *name, struct rte_pci_device *pci_dev,
internals = cryptodev->data->dev_private;
internals->max_nb_sessions = init_params->max_nb_sessions;
- switch (pci_dev->id.device_id) {
+ internals->pci_dev = RTE_DEV_TO_PCI(cryptodev->device);
+ internals->dev_id = cryptodev->data->dev_id;
+ switch (internals->pci_dev->id.device_id) {
case 0x0443:
internals->qat_dev_gen = QAT_GEN1;
internals->qat_dev_capabilities = qat_gen1_sym_capabilities;
--
2.13.6
next prev parent reply other threads:[~2018-05-11 11:15 UTC|newest]
Thread overview: 109+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-06 18:51 [dpdk-dev] [PATCH 00/30] crypto/qat: refactor to support multiple service Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 01/30] crypto/qat: use SPDX license Fiona Trahe
2018-04-18 8:03 ` De Lara Guarch, Pablo
2018-04-06 18:51 ` [dpdk-dev] [PATCH 02/30] crypto/qat: add qat common header Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 03/30] crypto/qat: add qat device files Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 04/30] crypto/qat: remove unused includes Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 05/30] crypto/qat: add symmetric session file Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 06/30] crypto/qat: change filename crypto to sym Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 07/30] crypto/qat: rename fns for consistency Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 08/30] crypto/qat: renamed sym-specific structs Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 09/30] crypto/qat: make enqueue function generic Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 10/30] crypto/qat: make dequeue " Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 11/30] crypto/qat: move generic qp fn to qp file Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 12/30] crypto/qat: separate sym-specific from generic qp setup Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 13/30] crypto/qat: move sym-specific qp code to sym file Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 14/30] crypto/qat: remove dependencies on cryptodev from common Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 15/30] crypto/qat: move defines from sym to qp header file Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 16/30] crypto/qat: create data structures to support different generations Fiona Trahe
2018-04-06 18:51 ` [dpdk-dev] [PATCH 17/30] crypto/qat: rename sgl related objects Fiona Trahe
2018-04-06 18:52 ` [dpdk-dev] [PATCH 18/30] crypto/qat: move sgl related element to appropriate files Fiona Trahe
2018-04-06 18:52 ` [dpdk-dev] [PATCH 19/30] crypto/qat: add QAT PCI device struct Fiona Trahe
2018-04-06 18:52 ` [dpdk-dev] [PATCH 20/30] crypto/qat: separate the name used for PCI reg from crypto name Fiona Trahe
2018-04-06 18:52 ` [dpdk-dev] [PATCH 21/30] crypto/qat: move to using new device structure Fiona Trahe
2018-04-06 18:52 ` [dpdk-dev] [PATCH 22/30] crypto/qat: use common stats structures Fiona Trahe
2018-04-06 18:52 ` [dpdk-dev] [PATCH 23/30] crypto/qat: rename functions which depend on cryptodev Fiona Trahe
2018-04-06 18:52 ` [dpdk-dev] [PATCH 24/30] crypto/qat: move code into appropriate files Fiona Trahe
2018-04-06 18:52 ` [dpdk-dev] [PATCH 25/30] crypto/qat: add lock around csr access and change logic Fiona Trahe
2018-04-06 18:52 ` [dpdk-dev] [PATCH 26/30] crypto/qat: remove incorrect usage of bundle number Fiona Trahe
2018-04-06 18:52 ` [dpdk-dev] [PATCH 27/30] crypto/qat: cleanups Fiona Trahe
2018-04-06 18:52 ` [dpdk-dev] [PATCH 28/30] crypto/qat: create appropriately named device for registration Fiona Trahe
2018-04-06 18:52 ` [dpdk-dev] [PATCH 29/30] crypto/qat: add MAX PCI DEVICES flag to config file Fiona Trahe
2018-04-06 18:52 ` [dpdk-dev] [PATCH 30/30] crypto/qat: add performance improvement into qat crypto dev Fiona Trahe
2018-04-11 12:41 ` [dpdk-dev] [PATCH 00/30] crypto/qat: refactor to support multiple service De Lara Guarch, Pablo
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 00/31] crypto/qat: refactor to support multiple Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 01/31] crypto/qat: add qat common header Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 02/31] crypto/qat: add qat device files Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 03/31] crypto/qat: remove unused includes Fiona Trahe
2018-06-11 22:20 ` De Lara Guarch, Pablo
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 04/31] crypto/qat: add symmetric session file Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 05/31] crypto/qat: change filename crypto to sym Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 06/31] crypto/qat: rename fns for consistency Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 07/31] crypto/qat: renamed sym-specific structs Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 08/31] crypto/qat: make enqueue function generic Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 09/31] crypto/qat: make dequeue " Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 10/31] crypto/qat: move generic qp fn to qp file Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 11/31] crypto/qat: separate sym-specific from generic qp setup Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 12/31] crypto/qat: move sym-specific qp code to sym file Fiona Trahe
2018-05-11 11:13 ` Fiona Trahe [this message]
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 14/31] crypto/qat: move defines from sym to qp header file Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 15/31] crypto/qat: create data structures to support different generations Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 16/31] crypto/qat: rename sgl related objects Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 17/31] crypto/qat: move sgl related element to appropriate files Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 18/31] crypto/qat: add QAT PCI device struct Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 19/31] crypto/qat: separate the name used for PCI reg from crypto name Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 20/31] crypto/qat: move to using new device structure Fiona Trahe
2018-05-11 11:13 ` [dpdk-dev] [PATCH v2 21/31] crypto/qat: use common stats structures Fiona Trahe
2018-05-11 11:14 ` [dpdk-dev] [PATCH v2 22/31] crypto/qat: rename functions which depend on cryptodev Fiona Trahe
2018-05-11 11:14 ` [dpdk-dev] [PATCH v2 23/31] crypto/qat: move code into appropriate files Fiona Trahe
2018-05-11 11:14 ` [dpdk-dev] [PATCH v2 24/31] crypto/qat: add lock around csr access and change logic Fiona Trahe
2018-05-11 11:14 ` [dpdk-dev] [PATCH v2 25/31] crypto/qat: remove incorrect usage of bundle number Fiona Trahe
2018-05-11 11:14 ` [dpdk-dev] [PATCH v2 26/31] crypto/qat: cleanups Fiona Trahe
2018-06-11 22:21 ` De Lara Guarch, Pablo
2018-05-11 11:14 ` [dpdk-dev] [PATCH v2 27/31] crypto/qat: create appropriately named device for registration Fiona Trahe
2018-05-11 11:14 ` [dpdk-dev] [PATCH v2 28/31] crypto/qat: add MAX PCI DEVICES flag to config file Fiona Trahe
2018-05-11 11:14 ` [dpdk-dev] [PATCH v2 29/31] crypto/qat: add performance improvement into qat crypto dev Fiona Trahe
2018-06-11 22:23 ` De Lara Guarch, Pablo
2018-05-11 11:14 ` [dpdk-dev] [PATCH v2 30/31] doc/qat: specify QAT driver and device name formats Fiona Trahe
2018-05-14 15:38 ` Kovacevic, Marko
2018-05-11 11:14 ` [dpdk-dev] [PATCH v2 31/31] crypto/qat: remove CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS Fiona Trahe
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 00/38] crypto/qat: refactor to support multiple services Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 01/38] crypto/qat: add qat common header Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 02/38] crypto/qat: add qat device files Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 03/38] crypto/qat: remove unused includes Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 04/38] crypto/qat: add symmetric session file Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 05/38] crypto/qat: change filename crypto to sym Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 06/38] crypto/qat: rename fns for consistency Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 07/38] crypto/qat: renamed sym-specific structs Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 08/38] crypto/qat: make enqueue function generic Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 09/38] crypto/qat: make dequeue " Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 10/38] crypto/qat: move generic qp fn to qp file Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 11/38] crypto/qat: separate sym-specific from generic qp setup Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 12/38] crypto/qat: move sym-specific qp code to sym file Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 13/38] crypto/qat: remove dependencies on cryptodev from common Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 14/38] crypto/qat: move defines from sym to qp header file Tomasz Jozwiak
2018-06-13 12:13 ` [dpdk-dev] [PATCH v3 15/38] crypto/qat: create structures to support various generations Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 16/38] crypto/qat: rename sgl related objects Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 17/38] crypto/qat: move sgl related element to appropriate files Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 18/38] crypto/qat: add QAT PCI device struct Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 19/38] crypto/qat: use generic driver name for PCI registration Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 20/38] crypto/qat: move to using new device structure Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 21/38] crypto/qat: use common stats structures Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 22/38] crypto/qat: rename functions which depend on cryptodev Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 23/38] crypto/qat: move code into appropriate files Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 24/38] crypto/qat: add lock around csr access and change logic Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 25/38] crypto/qat: remove incorrect usage of bundle number Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 26/38] crypto/qat: rename variables Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 27/38] crypto/qat: modify debug message Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 28/38] crypto/qat: free cookie pool on queue creation error Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 29/38] crypto/qat: remove unused macro Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 30/38] crypto/qat: move macro to common file Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 31/38] crypto/qat: register appropriately named device Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 32/38] crypto/qat: add max PCI devices to config file Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 33/38] crypto/qat: optimize adf modulo function Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 34/38] crypto/qat: remove unused arguments Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 35/38] crypto/qat: make response process function inline Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 36/38] crypto/qat: check for service type Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 37/38] doc/qat: specify QAT driver and device name formats Tomasz Jozwiak
2018-06-13 12:14 ` [dpdk-dev] [PATCH v3 38/38] crypto/qat: remove configurable max number of sessions Tomasz Jozwiak
2018-06-14 10:59 ` [dpdk-dev] [PATCH v3 00/38] crypto/qat: refactor to support multiple services De Lara Guarch, Pablo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526037249-25545-14-git-send-email-fiona.trahe@intel.com \
--to=fiona.trahe@intel.com \
--cc=dev@dpdk.org \
--cc=pablo.de.lara.guarch@intel.com \
--cc=tomaszx.jozwiak@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).