DPDK patches and discussions
 help / color / mirror / Atom feed
From: Ophir Munk <ophirmu@mellanox.com>
To: dev@dpdk.org, Adrien Mazarguil <adrien.mazarguil@6wind.com>
Cc: Thomas Monjalon <thomas@monjalon.net>,
	Olga Shern <olgas@mellanox.com>,
	Ophir Munk <ophirmu@mellanox.com>,
	Shahaf Shuler <shahafs@mellanox.com>
Subject: [dpdk-dev] [PATCH v4 2/2] net/mlx4: advertise supported RSS hash functions
Date: Sun, 13 May 2018 15:39:55 +0000	[thread overview]
Message-ID: <1526225995-31378-2-git-send-email-ophirmu@mellanox.com> (raw)
In-Reply-To: <1526225995-31378-1-git-send-email-ophirmu@mellanox.com>

Advertise mlx4 supported RSS functions as part of dev_infos_get
callback.
Previous to this commit RSS support was reported as none. Since the
introduction of [1] it is required that all RSS configurations will be
verified.

[1] commit 8863a1fbfc66 ("ethdev: add supported hash function check")

Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
---
 drivers/net/mlx4/mlx4_ethdev.c | 12 ++++++-----
 drivers/net/mlx4/mlx4_flow.c   | 45 ++++++++++++++++++++++++++++++++++++++++++
 drivers/net/mlx4/mlx4_flow.h   | 35 ++++++++++++++++++++++++++++++++
 3 files changed, 87 insertions(+), 5 deletions(-)

diff --git a/drivers/net/mlx4/mlx4_ethdev.c b/drivers/net/mlx4/mlx4_ethdev.c
index 9a76670..ef559a3 100644
--- a/drivers/net/mlx4/mlx4_ethdev.c
+++ b/drivers/net/mlx4/mlx4_ethdev.c
@@ -582,11 +582,13 @@ mlx4_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
 		info->if_index = if_nametoindex(ifname);
 	info->hash_key_size = MLX4_RSS_HASH_KEY_SIZE;
 	info->speed_capa =
-			ETH_LINK_SPEED_1G |
-			ETH_LINK_SPEED_10G |
-			ETH_LINK_SPEED_20G |
-			ETH_LINK_SPEED_40G |
-			ETH_LINK_SPEED_56G;
+		ETH_LINK_SPEED_1G |
+		ETH_LINK_SPEED_10G |
+		ETH_LINK_SPEED_20G |
+		ETH_LINK_SPEED_40G |
+		ETH_LINK_SPEED_56G;
+	info->flow_type_rss_offloads =
+		mlx4_ibv_to_rss_types(priv->hw_rss_sup);
 }
 
 /**
diff --git a/drivers/net/mlx4/mlx4_flow.c b/drivers/net/mlx4/mlx4_flow.c
index f117e2e..b234623 100644
--- a/drivers/net/mlx4/mlx4_flow.c
+++ b/drivers/net/mlx4/mlx4_flow.c
@@ -139,6 +139,51 @@ mlx4_conv_rss_types(struct priv *priv, uint64_t types)
 }
 
 /**
+ * Convert verbs RSS types to their DPDK equivalents.
+ *
+ * This function returns a group of RSS DPDK types given their equivalent group
+ * of verbs types.
+ * For example both source IPv4 and destination IPv4 verbs types are converted
+ * into their equivalent RSS group types. If each of these verbs types existed
+ * exclusively - no conversion would take place.
+ *
+ * @param types
+ *   RSS hash types in verbs format.
+ *
+ * @return
+ *   DPDK RSS hash fields supported by mlx4.
+ */
+uint64_t
+mlx4_ibv_to_rss_types(uint64_t types)
+{
+	enum { IPV4, IPV6, IPV4_TCP, IPV6_TCP, IPV4_UDP, IPV6_UDP};
+
+	static const uint64_t in[] = {
+		[IPV4] = IPV4_IBV_HF,
+		[IPV6] = IPV6_IBV_HF,
+		[IPV4_TCP] = IPV4_IBV_HF | TCP_IBV_HF,
+		[IPV6_TCP] = IPV6_IBV_HF | TCP_IBV_HF,
+		[IPV4_UDP] = IPV4_IBV_HF | UDP_IBV_HF,
+		[IPV6_UDP] = IPV6_IBV_HF | UDP_IBV_HF,
+	};
+	static const uint64_t out[RTE_DIM(in)] = {
+		[IPV4] = IPV4_RSS_HF,
+		[IPV6] = IPV6_RSS_HF,
+		[IPV4_TCP] = IPV4_RSS_HF | IPV4_TCP_RSS_HF,
+		[IPV6_TCP] = IPV6_RSS_HF | IPV6_TCP_RSS_HF,
+		[IPV4_UDP] = IPV4_RSS_HF | IPV4_UDP_RSS_HF,
+		[IPV6_UDP] = IPV6_RSS_HF | IPV6_UDP_RSS_HF,
+	};
+	uint64_t conv = 0;
+	unsigned int i;
+
+	for (i = 0; i != RTE_DIM(in); ++i)
+		if ((types & in[i]) == in[i])
+			conv |= out[i];
+	return conv;
+}
+
+/**
  * Merge Ethernet pattern item into flow rule handle.
  *
  * Additional mlx4-specific constraints on supported fields:
diff --git a/drivers/net/mlx4/mlx4_flow.h b/drivers/net/mlx4/mlx4_flow.h
index 2c8dff3..e47982c 100644
--- a/drivers/net/mlx4/mlx4_flow.h
+++ b/drivers/net/mlx4/mlx4_flow.h
@@ -30,6 +30,40 @@
 /** Meta pattern item used to distinguish internal rules. */
 #define MLX4_FLOW_ITEM_TYPE_INTERNAL ((enum rte_flow_item_type)-1)
 
+/** IBV supported RSS hash functions combinations */
+#define IPV4_IBV_HF ( \
+	IBV_RX_HASH_SRC_IPV4 | \
+	IBV_RX_HASH_DST_IPV4)
+#define IPV6_IBV_HF ( \
+	IBV_RX_HASH_SRC_IPV6 | \
+	IBV_RX_HASH_DST_IPV6)
+#define TCP_IBV_HF ( \
+	IBV_RX_HASH_SRC_PORT_TCP | \
+	IBV_RX_HASH_DST_PORT_TCP)
+#define UDP_IBV_HF (IBV_RX_HASH_SRC_PORT_UDP | \
+	IBV_RX_HASH_DST_PORT_UDP)
+
+/** Supported RSS hash functions combinations */
+#define IPV4_RSS_HF ( \
+	ETH_RSS_IPV4 | \
+	ETH_RSS_FRAG_IPV4 | \
+	ETH_RSS_NONFRAG_IPV4_OTHER)
+#define IPV6_RSS_HF ( \
+	ETH_RSS_IPV6 | \
+	ETH_RSS_FRAG_IPV6 | \
+	ETH_RSS_NONFRAG_IPV6_OTHER | \
+	ETH_RSS_IPV6_EX)
+#define IPV4_TCP_RSS_HF ( \
+	ETH_RSS_NONFRAG_IPV4_TCP)
+#define IPV6_TCP_RSS_HF ( \
+	ETH_RSS_NONFRAG_IPV6_TCP | \
+	ETH_RSS_IPV6_TCP_EX)
+#define IPV4_UDP_RSS_HF ( \
+	ETH_RSS_NONFRAG_IPV4_UDP)
+#define IPV6_UDP_RSS_HF ( \
+	ETH_RSS_NONFRAG_IPV6_UDP | \
+	ETH_RSS_IPV6_UDP_EX)
+
 /** PMD-specific (mlx4) definition of a flow rule handle. */
 struct rte_flow {
 	LIST_ENTRY(rte_flow) next; /**< Pointer to the next flow structure. */
@@ -49,6 +83,7 @@ struct rte_flow {
 /* mlx4_flow.c */
 
 uint64_t mlx4_conv_rss_types(struct priv *priv, uint64_t rss_hf);
+uint64_t mlx4_ibv_to_rss_types(uint64_t ibv_rss_types);
 int mlx4_flow_sync(struct priv *priv, struct rte_flow_error *error);
 void mlx4_flow_clean(struct priv *priv);
 int mlx4_filter_ctrl(struct rte_eth_dev *dev,
-- 
2.7.4

  reply	other threads:[~2018-05-13 15:40 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-08 15:43 [dpdk-dev] [PATCH v1] net/mlx4: report on " Ophir Munk
2018-05-09  9:38 ` Shahaf Shuler
2018-05-09 11:54   ` Ophir Munk
2018-05-09 14:01     ` Shahaf Shuler
2018-05-09 22:42       ` Ophir Munk
2018-05-09 22:27 ` [dpdk-dev] [PATCH v2 1/2] net/mlx4: advertise " Ophir Munk
2018-05-09 22:27   ` [dpdk-dev] [PATCH v2 2/2] net/mlx4: avoid constant recreations in functions Ophir Munk
2018-05-10  5:20   ` [dpdk-dev] [PATCH v2 1/2] net/mlx4: advertise supported RSS hash functions Shahaf Shuler
2018-05-10 14:25     ` Ophir Munk
2018-05-10 14:21   ` [dpdk-dev] [PATCH v3 " Ophir Munk
2018-05-10 14:21     ` [dpdk-dev] [PATCH v3 2/2] net/mlx4: avoid constant recreations in functions Ophir Munk
2018-05-13  6:05       ` Shahaf Shuler
2018-05-13  6:05     ` [dpdk-dev] [PATCH v3 1/2] net/mlx4: advertise supported RSS hash functions Shahaf Shuler
2018-05-13 15:36     ` [dpdk-dev] [PATCH v4 1/2] net/mlx4: avoid constant recreations in function Ophir Munk
2018-05-13 15:36       ` [dpdk-dev] [PATCH v4 2/2] net/mlx4: advertise supported RSS hash functions Ophir Munk
2018-05-13 15:39     ` [dpdk-dev] [PATCH v4 1/2] net/mlx4: avoid constant recreations in function Ophir Munk
2018-05-13 15:39       ` Ophir Munk [this message]
2018-05-13 16:12         ` [dpdk-dev] [PATCH v4 2/2] net/mlx4: advertise supported RSS hash functions Thomas Monjalon
2018-05-13 16:13           ` Ophir Munk
2018-05-13 16:23             ` Ophir Munk
2018-05-13 16:50       ` [dpdk-dev] [PATCH v5 1/2] net/mlx4: avoid constant recreations in function Ophir Munk
2018-05-13 16:50         ` [dpdk-dev] [PATCH v5 2/2] net/mlx4: advertise supported RSS hash functions Ophir Munk
2018-05-14 10:07         ` [dpdk-dev] [PATCH v6 1/2] net/mlx4: avoid constant recreations in function Ophir Munk
2018-05-14 10:07           ` [dpdk-dev] [PATCH v6 2/2] net/mlx4: advertise supported RSS hash functions Ophir Munk
2018-05-14 10:14           ` [dpdk-dev] [PATCH v6 1/2] net/mlx4: avoid constant recreations in function Shahaf Shuler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1526225995-31378-2-git-send-email-ophirmu@mellanox.com \
    --to=ophirmu@mellanox.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=olgas@mellanox.com \
    --cc=shahafs@mellanox.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).