DPDK patches and discussions
 help / color / mirror / Atom feed
From: Vipin Varghese <vipin.varghese@intel.com>
To: dev@dpdk.org, keith.wiles@intel.com, ferruh.yigit@intel.com,
	ophirmu@mellanox.com
Cc: Vipin Varghese <vipin.varghese@intel.com>
Subject: [dpdk-dev] [PATCH v2] net/tap: perform proto field update for tun only
Date: Tue, 15 May 2018 20:19:40 +0530	[thread overview]
Message-ID: <1526395780-105792-1-git-send-email-vipin.varghese@intel.com> (raw)
In-Reply-To: <1526273615-154067-1-git-send-email-vipin.varghese@intel.com>

The TX function is shared between TAP and TUN PMD. Checking TUN-TAP
type field will ensure the TAP PMD will always have protocol field
as 0.

Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
---

Changes in V2:
updated in comment wording - Keith Wiles
remove debug print from tx code - Keith Wiles
---
 drivers/net/tap/rte_eth_tap.c | 48 ++++++++++++++++++++++++++-----------------
 drivers/net/tap/rte_eth_tap.h | 10 +++++++++
 2 files changed, 39 insertions(+), 19 deletions(-)

diff --git a/drivers/net/tap/rte_eth_tap.c b/drivers/net/tap/rte_eth_tap.c
index ea6d899..fafd557 100644
--- a/drivers/net/tap/rte_eth_tap.c
+++ b/drivers/net/tap/rte_eth_tap.c
@@ -115,7 +115,8 @@ tun_alloc(struct pmd_internals *pmd)
 	 * Do not set IFF_NO_PI as packet information header will be needed
 	 * to check if a received packet has been truncated.
 	 */
-	ifr.ifr_flags = (tap_type) ? IFF_TAP : IFF_TUN | IFF_POINTOPOINT;
+	ifr.ifr_flags = (pmd->type == ETH_TUNTAP_TYPE_TAP) ?
+			IFF_TAP : IFF_TUN | IFF_POINTOPOINT;
 	snprintf(ifr.ifr_name, IFNAMSIZ, "%s", pmd->name);
 
 	TAP_LOG(DEBUG, "ifr_name '%s'", ifr.ifr_name);
@@ -502,20 +503,22 @@ pmd_tx_burst(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
 		if (rte_pktmbuf_pkt_len(mbuf) > max_size)
 			break;
 
-		/*
-		 * TUN and TAP are created with IFF_NO_PI disabled.
-		 * For TUN PMD this mandatory as fields are used by
-		 * Kernel tun.c to determine whether its IP or non IP
-		 * packets.
-		 *
-		 * The logic fetches the first byte of data from mbuf.
-		 * compares whether its v4 or v6. If none matches default
-		 * value 0x00 is taken for protocol field.
-		 */
-		char *buff_data = rte_pktmbuf_mtod(seg, void *);
-		j = (*buff_data & 0xf0);
-		pi.proto = (j == 0x40) ? 0x0008 :
-				(j == 0x60) ? 0xdd86 : 0x00;
+		if (txq->type == ETH_TUNTAP_TYPE_TUN) {
+			/*
+			 * TUN and TAP are created with IFF_NO_PI disabled.
+			 * For TUN PMD this mandatory as fields are used by
+			 * Kernel tun.c to determine whether its IP or non IP
+			 * packets.
+			 *
+			 * The logic fetches the first byte of data from mbuf
+			 * then compares whether its v4 or v6. If first byte
+			 * is 4 or 6, then protocol field is updated.
+			 */
+			char *buff_data = rte_pktmbuf_mtod(seg, void *);
+			j = (*buff_data & 0xf0);
+			pi.proto = (j == 0x40) ? 0x0008 :
+					(j == 0x60) ? 0xdd86 : 0x00;
+		}
 
 		iovecs[0].iov_base = &pi;
 		iovecs[0].iov_len = sizeof(pi);
@@ -1052,6 +1055,9 @@ tap_setup_queue(struct rte_eth_dev *dev,
 	tx->mtu = &dev->data->mtu;
 	rx->rxmode = &dev->data->dev_conf.rxmode;
 
+	tx->type = pmd->type;
+	rx->type = pmd->type;
+
 	return *fd;
 }
 
@@ -1386,6 +1392,7 @@ eth_dev_tap_create(struct rte_vdev_device *vdev, char *tap_name,
 	pmd = dev->data->dev_private;
 	pmd->dev = dev;
 	snprintf(pmd->name, sizeof(pmd->name), "%s", tap_name);
+	pmd->type = ETH_TUNTAP_TYPE_UNKNOWN;
 
 	pmd->ioctl_sock = socket(AF_INET, SOCK_DGRAM, 0);
 	if (pmd->ioctl_sock == -1) {
@@ -1421,7 +1428,9 @@ eth_dev_tap_create(struct rte_vdev_device *vdev, char *tap_name,
 		pmd->txq[i].fd = -1;
 	}
 
-	if (tap_type) {
+	pmd->type = (tap_type) ? ETH_TUNTAP_TYPE_TAP : ETH_TUNTAP_TYPE_TUN;
+
+	if (pmd->type == ETH_TUNTAP_TYPE_TAP) {
 		if (is_zero_ether_addr(mac_addr))
 			eth_random_addr((uint8_t *)&pmd->eth_addr);
 		else
@@ -1440,7 +1449,7 @@ eth_dev_tap_create(struct rte_vdev_device *vdev, char *tap_name,
 	if (tap_ioctl(pmd, SIOCSIFMTU, &ifr, 1, LOCAL_AND_REMOTE) < 0)
 		goto error_exit;
 
-	if (tap_type) {
+	if (pmd->type == ETH_TUNTAP_TYPE_TAP) {
 		memset(&ifr, 0, sizeof(struct ifreq));
 		ifr.ifr_hwaddr.sa_family = AF_LOCAL;
 		rte_memcpy(ifr.ifr_hwaddr.sa_data, &pmd->eth_addr,
@@ -1812,7 +1821,9 @@ rte_pmd_tap_remove(struct rte_vdev_device *dev)
 	struct pmd_internals *internals;
 	int i;
 
-	TAP_LOG(DEBUG, "Closing TUN/TAP Ethernet device on numa %u",
+	internals = eth_dev->data->dev_private;
+	TAP_LOG(DEBUG, "Closing %s Ethernet device on numa %u",
+		(internals->type == ETH_TUNTAP_TYPE_TAP) ? "TAP" : "TUN",
 		rte_socket_id());
 
 	/* find the ethdev entry */
@@ -1820,7 +1831,6 @@ rte_pmd_tap_remove(struct rte_vdev_device *dev)
 	if (!eth_dev)
 		return 0;
 
-	internals = eth_dev->data->dev_private;
 	if (internals->nlsk_fd) {
 		tap_flow_flush(eth_dev, NULL);
 		tap_flow_implicit_flush(internals, NULL);
diff --git a/drivers/net/tap/rte_eth_tap.h b/drivers/net/tap/rte_eth_tap.h
index 67c9d4b..8b0da5a 100644
--- a/drivers/net/tap/rte_eth_tap.h
+++ b/drivers/net/tap/rte_eth_tap.h
@@ -23,6 +23,13 @@
 #define RTE_PMD_TAP_MAX_QUEUES	1
 #endif
 
+enum rte_tuntap_type {
+	ETH_TUNTAP_TYPE_UNKNOWN,
+	ETH_TUNTAP_TYPE_TUN,
+	ETH_TUNTAP_TYPE_TAP,
+	ETH_TUNTAP_TYPE_MAX,
+};
+
 struct pkt_stats {
 	uint64_t opackets;              /* Number of output packets */
 	uint64_t ipackets;              /* Number of input packets */
@@ -38,6 +45,7 @@ struct rx_queue {
 	uint32_t trigger_seen;          /* Last seen Rx trigger value */
 	uint16_t in_port;               /* Port ID */
 	int fd;
+	int type;			  /* Type field - TUN|TAP */
 	struct pkt_stats stats;         /* Stats for this RX queue */
 	uint16_t nb_rx_desc;            /* max number of mbufs available */
 	struct rte_eth_rxmode *rxmode;  /* RX features */
@@ -48,6 +56,7 @@ struct rx_queue {
 
 struct tx_queue {
 	int fd;
+	int type;			  /* Type field - TUN|TAP */
 	uint16_t *mtu;                  /* Pointer to MTU from dev_data */
 	uint16_t csum:1;                /* Enable checksum offloading */
 	struct pkt_stats stats;         /* Stats for this TX queue */
@@ -57,6 +66,7 @@ struct pmd_internals {
 	struct rte_eth_dev *dev;          /* Ethernet device. */
 	char remote_iface[RTE_ETH_NAME_MAX_LEN]; /* Remote netdevice name */
 	char name[RTE_ETH_NAME_MAX_LEN];  /* Internal Tap device name */
+	int type;			  /* Type field - TUN|TAP */
 	struct ether_addr eth_addr;       /* Mac address of the device port */
 	struct ifreq remote_initial_flags;   /* Remote netdevice flags on init */
 	int remote_if_index;              /* remote netdevice IF_INDEX */
-- 
2.7.4

  parent reply	other threads:[~2018-05-15  9:07 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-14  4:53 [dpdk-dev] [PATCH] " Vipin Varghese
2018-05-14 22:27 ` Wiles, Keith
2018-05-15  9:08   ` Varghese, Vipin
2018-05-15 14:49 ` Vipin Varghese [this message]
2018-05-15 12:31   ` [dpdk-dev] [PATCH v2] " Wiles, Keith
2018-05-15 22:28   ` Ophir Munk
2018-05-22  6:33     ` Varghese, Vipin
2018-05-22 11:05       ` Varghese, Vipin
2018-05-22 13:55         ` Wiles, Keith
2018-05-22 10:47   ` [dpdk-dev] [PATCH v3] " Vipin Varghese
2018-05-22 13:53     ` Wiles, Keith
2018-05-23  4:33       ` Varghese, Vipin
2018-05-22 15:04     ` Ophir Munk
2018-05-23  4:37       ` Varghese, Vipin
2018-05-22 22:04     ` [dpdk-dev] [PATCH v4] " Ferruh Yigit
2018-05-22 22:06       ` Ferruh Yigit
2018-05-22 22:09       ` [dpdk-dev] [PATCH v5] net/tap: fix proto field for tun Ferruh Yigit
2018-05-22 22:19         ` Ferruh Yigit
2018-05-22 22:25           ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1526395780-105792-1-git-send-email-vipin.varghese@intel.com \
    --to=vipin.varghese@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=keith.wiles@intel.com \
    --cc=ophirmu@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).