From: Nikhil Rao <nikhil.rao@intel.com>
To: jerin.jacob@caviumnetworks.com
Cc: nikhil.rao@intel.com, dev@dpdk.org
Subject: [dpdk-dev] [PATCH v4 5/5] eventdev: add Rx adapter tests for interrupt driven queues
Date: Mon, 2 Jul 2018 07:25:30 +0530 [thread overview]
Message-ID: <1530496530-112764-6-git-send-email-nikhil.rao@intel.com> (raw)
In-Reply-To: <1530496530-112764-1-git-send-email-nikhil.rao@intel.com>
Add test for queue add and delete, the add/delete calls
also switch queues between poll and interrupt mode.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
---
test/test/test_event_eth_rx_adapter.c | 261 +++++++++++++++++++++++++++++++---
1 file changed, 242 insertions(+), 19 deletions(-)
diff --git a/test/test/test_event_eth_rx_adapter.c b/test/test/test_event_eth_rx_adapter.c
index d432731..2337e54 100644
--- a/test/test/test_event_eth_rx_adapter.c
+++ b/test/test/test_event_eth_rx_adapter.c
@@ -25,28 +25,17 @@ struct event_eth_rx_adapter_test_params {
struct rte_mempool *mp;
uint16_t rx_rings, tx_rings;
uint32_t caps;
+ int rx_intr_port_inited;
+ uint16_t rx_intr_port;
};
static struct event_eth_rx_adapter_test_params default_params;
static inline int
-port_init(uint8_t port, struct rte_mempool *mp)
+port_init_common(uint8_t port, const struct rte_eth_conf *port_conf,
+ struct rte_mempool *mp)
{
- static const struct rte_eth_conf port_conf_default = {
- .rxmode = {
- .mq_mode = ETH_MQ_RX_RSS,
- .max_rx_pkt_len = ETHER_MAX_LEN
- },
- .rx_adv_conf = {
- .rss_conf = {
- .rss_hf = ETH_RSS_IP |
- ETH_RSS_TCP |
- ETH_RSS_UDP,
- }
- }
- };
const uint16_t rx_ring_size = 512, tx_ring_size = 512;
- struct rte_eth_conf port_conf = port_conf_default;
int retval;
uint16_t q;
struct rte_eth_dev_info dev_info;
@@ -54,7 +43,7 @@ struct event_eth_rx_adapter_test_params {
if (!rte_eth_dev_is_valid_port(port))
return -1;
- retval = rte_eth_dev_configure(port, 0, 0, &port_conf);
+ retval = rte_eth_dev_configure(port, 0, 0, port_conf);
rte_eth_dev_info_get(port, &dev_info);
@@ -64,7 +53,7 @@ struct event_eth_rx_adapter_test_params {
/* Configure the Ethernet device. */
retval = rte_eth_dev_configure(port, default_params.rx_rings,
- default_params.tx_rings, &port_conf);
+ default_params.tx_rings, port_conf);
if (retval != 0)
return retval;
@@ -104,6 +93,77 @@ struct event_eth_rx_adapter_test_params {
return 0;
}
+static inline int
+port_init_rx_intr(uint8_t port, struct rte_mempool *mp)
+{
+ static const struct rte_eth_conf port_conf_default = {
+ .rxmode = {
+ .mq_mode = ETH_MQ_RX_RSS,
+ .max_rx_pkt_len = ETHER_MAX_LEN
+ },
+ .intr_conf = {
+ .rxq = 1,
+ },
+ };
+
+ return port_init_common(port, &port_conf_default, mp);
+}
+
+static inline int
+port_init(uint8_t port, struct rte_mempool *mp)
+{
+ static const struct rte_eth_conf port_conf_default = {
+ .rxmode = {
+ .mq_mode = ETH_MQ_RX_RSS,
+ .max_rx_pkt_len = ETHER_MAX_LEN
+ },
+ .rx_adv_conf = {
+ .rss_conf = {
+ .rss_hf = ETH_RSS_IP |
+ ETH_RSS_TCP |
+ ETH_RSS_UDP,
+ }
+ }
+ };
+
+ return port_init_common(port, &port_conf_default, mp);
+}
+
+static int
+init_port_rx_intr(int num_ports)
+{
+ int retval;
+ uint16_t portid;
+ int err;
+
+ default_params.mp = rte_pktmbuf_pool_create("packet_pool",
+ NB_MBUFS,
+ MBUF_CACHE_SIZE,
+ MBUF_PRIV_SIZE,
+ RTE_MBUF_DEFAULT_BUF_SIZE,
+ rte_socket_id());
+ if (!default_params.mp)
+ return -ENOMEM;
+
+ RTE_ETH_FOREACH_DEV(portid) {
+ retval = port_init_rx_intr(portid, default_params.mp);
+ if (retval)
+ continue;
+ err = rte_event_eth_rx_adapter_caps_get(TEST_DEV_ID, portid,
+ &default_params.caps);
+ if (err)
+ continue;
+ if (!(default_params.caps &
+ RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT)) {
+ default_params.rx_intr_port_inited = 1;
+ default_params.rx_intr_port = portid;
+ return 0;
+ }
+ rte_eth_dev_stop(portid);
+ }
+ return 0;
+}
+
static int
init_ports(int num_ports)
{
@@ -181,6 +241,57 @@ struct event_eth_rx_adapter_test_params {
return err;
}
+static int
+testsuite_setup_rx_intr(void)
+{
+ int err;
+ uint8_t count;
+ struct rte_event_dev_info dev_info;
+
+ count = rte_event_dev_count();
+ if (!count) {
+ printf("Failed to find a valid event device,"
+ " testing with event_skeleton device\n");
+ rte_vdev_init("event_skeleton", NULL);
+ }
+
+ struct rte_event_dev_config config = {
+ .nb_event_queues = 1,
+ .nb_event_ports = 1,
+ };
+
+ err = rte_event_dev_info_get(TEST_DEV_ID, &dev_info);
+ config.nb_event_queue_flows = dev_info.max_event_queue_flows;
+ config.nb_event_port_dequeue_depth =
+ dev_info.max_event_port_dequeue_depth;
+ config.nb_event_port_enqueue_depth =
+ dev_info.max_event_port_enqueue_depth;
+ config.nb_events_limit =
+ dev_info.max_num_events;
+
+ err = rte_event_dev_configure(TEST_DEV_ID, &config);
+ TEST_ASSERT(err == 0, "Event device initialization failed err %d\n",
+ err);
+
+ /*
+ * eth devices like octeontx use event device to receive packets
+ * so rte_eth_dev_start invokes rte_event_dev_start internally, so
+ * call init_ports after rte_event_dev_configure
+ */
+ err = init_port_rx_intr(rte_eth_dev_count_total());
+ TEST_ASSERT(err == 0, "Port initialization failed err %d\n", err);
+
+ if (!default_params.rx_intr_port_inited)
+ return 0;
+
+ err = rte_event_eth_rx_adapter_caps_get(TEST_DEV_ID,
+ default_params.rx_intr_port,
+ &default_params.caps);
+ TEST_ASSERT(err == 0, "Failed to get adapter cap err %d\n", err);
+
+ return err;
+}
+
static void
testsuite_teardown(void)
{
@@ -191,6 +302,16 @@ struct event_eth_rx_adapter_test_params {
rte_mempool_free(default_params.mp);
}
+static void
+testsuite_teardown_rx_intr(void)
+{
+ if (!default_params.rx_intr_port_inited)
+ return;
+
+ rte_eth_dev_stop(default_params.rx_intr_port);
+ rte_mempool_free(default_params.mp);
+}
+
static int
adapter_create(void)
{
@@ -401,6 +522,89 @@ struct event_eth_rx_adapter_test_params {
}
static int
+adapter_intr_queue_add_del(void)
+{
+ int err;
+ struct rte_event ev;
+ uint32_t cap;
+ uint16_t eth_port;
+ struct rte_event_eth_rx_adapter_queue_conf queue_config;
+
+ if (!default_params.rx_intr_port_inited)
+ return 0;
+
+ eth_port = default_params.rx_intr_port;
+ err = rte_event_eth_rx_adapter_caps_get(TEST_DEV_ID, eth_port, &cap);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ ev.queue_id = 0;
+ ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
+ ev.priority = 0;
+
+ queue_config.rx_queue_flags = 0;
+ queue_config.ev = ev;
+
+ /* weight = 0 => interrupt mode */
+ queue_config.servicing_weight = 0;
+
+ /* add queue 0 */
+ err = rte_event_eth_rx_adapter_queue_add(TEST_INST_ID,
+ TEST_ETHDEV_ID, 0,
+ &queue_config);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ /* add all queues */
+ queue_config.servicing_weight = 0;
+ err = rte_event_eth_rx_adapter_queue_add(TEST_INST_ID,
+ TEST_ETHDEV_ID,
+ -1,
+ &queue_config);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ /* del queue 0 */
+ err = rte_event_eth_rx_adapter_queue_del(TEST_INST_ID,
+ TEST_ETHDEV_ID,
+ 0);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ /* del remaining queues */
+ err = rte_event_eth_rx_adapter_queue_del(TEST_INST_ID,
+ TEST_ETHDEV_ID,
+ -1);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ /* add all queues */
+ queue_config.servicing_weight = 0;
+ err = rte_event_eth_rx_adapter_queue_add(TEST_INST_ID,
+ TEST_ETHDEV_ID,
+ -1,
+ &queue_config);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ /* intr -> poll mode queue */
+ queue_config.servicing_weight = 1;
+ err = rte_event_eth_rx_adapter_queue_add(TEST_INST_ID,
+ TEST_ETHDEV_ID,
+ 0,
+ &queue_config);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ err = rte_event_eth_rx_adapter_queue_add(TEST_INST_ID,
+ TEST_ETHDEV_ID,
+ -1,
+ &queue_config);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ /* del queues */
+ err = rte_event_eth_rx_adapter_queue_del(TEST_INST_ID,
+ TEST_ETHDEV_ID,
+ -1);
+ TEST_ASSERT(err == 0, "Expected 0 got %d", err);
+
+ return TEST_SUCCESS;
+}
+
+static int
adapter_start_stop(void)
{
int err;
@@ -470,7 +674,7 @@ struct event_eth_rx_adapter_test_params {
return TEST_SUCCESS;
}
-static struct unit_test_suite service_tests = {
+static struct unit_test_suite event_eth_rx_tests = {
.suite_name = "rx event eth adapter test suite",
.setup = testsuite_setup,
.teardown = testsuite_teardown,
@@ -485,11 +689,30 @@ struct event_eth_rx_adapter_test_params {
}
};
+static struct unit_test_suite event_eth_rx_intr_tests = {
+ .suite_name = "rx event eth adapter test suite",
+ .setup = testsuite_setup_rx_intr,
+ .teardown = testsuite_teardown_rx_intr,
+ .unit_test_cases = {
+ TEST_CASE_ST(adapter_create, adapter_free,
+ adapter_intr_queue_add_del),
+ TEST_CASES_END() /**< NULL terminate unit test array */
+ }
+};
+
static int
test_event_eth_rx_adapter_common(void)
{
- return unit_test_suite_runner(&service_tests);
+ return unit_test_suite_runner(&event_eth_rx_tests);
+}
+
+static int
+test_event_eth_rx_intr_adapter_common(void)
+{
+ return unit_test_suite_runner(&event_eth_rx_intr_tests);
}
REGISTER_TEST_COMMAND(event_eth_rx_adapter_autotest,
test_event_eth_rx_adapter_common);
+REGISTER_TEST_COMMAND(event_eth_rx_intr_adapter_autotest,
+ test_event_eth_rx_intr_adapter_common);
--
1.8.3.1
next prev parent reply other threads:[~2018-07-02 1:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-02 1:55 [dpdk-dev] [PATCH v4 0/5] eventdev: add interrupt driven queues to Rx adapter Nikhil Rao
2018-07-02 1:55 ` [dpdk-dev] [PATCH v4 1/5] eventdev: standardize Rx adapter internal function names Nikhil Rao
2018-07-02 1:55 ` [dpdk-dev] [PATCH v4 2/5] eventdev: improve err handling for Rx adapter queue add/del Nikhil Rao
2018-07-02 1:55 ` [dpdk-dev] [PATCH v4 3/5] eventdev: move Rx adapter eth Rx to separate function Nikhil Rao
2018-07-02 1:55 ` [dpdk-dev] [PATCH v4 4/5] eventdev: add interrupt driven queues to Rx adapter Nikhil Rao
2018-07-02 1:55 ` Nikhil Rao [this message]
2018-07-02 7:43 ` [dpdk-dev] [PATCH v4 0/5] " Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1530496530-112764-6-git-send-email-nikhil.rao@intel.com \
--to=nikhil.rao@intel.com \
--cc=dev@dpdk.org \
--cc=jerin.jacob@caviumnetworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).