From: "Daly, Lee" <lee.daly@intel.com>
To: pablo.de.lara.guarch@intel.com
Cc: dev@dpdk.org, "Daly, Lee" <lee.daly@intel.com>
Subject: [dpdk-dev] [PATCH v3] compress/isal: add chained mbuf support
Date: Mon, 23 Jul 2018 19:02:25 +0100 [thread overview]
Message-ID: <1532368945-23909-1-git-send-email-lee.daly@intel.com> (raw)
In-Reply-To: <1531312811-177746-1-git-send-email-lee.daly@intel.com>
This patch adds chained mbuf support for input or output buffers
during compression/decompression operations.
Signed-off-by: Lee Daly <lee.daly@intel.com>
---
doc/guides/compressdevs/features/isal.ini | 17 +-
doc/guides/compressdevs/isal.rst | 2 -
drivers/compress/isal/isal_compress_pmd.c | 397 ++++++++++++++++++++------
drivers/compress/isal/isal_compress_pmd_ops.c | 5 +-
4 files changed, 323 insertions(+), 98 deletions(-)
diff --git a/doc/guides/compressdevs/features/isal.ini b/doc/guides/compressdevs/features/isal.ini
index 7183d10..919cf70 100644
--- a/doc/guides/compressdevs/features/isal.ini
+++ b/doc/guides/compressdevs/features/isal.ini
@@ -4,10 +4,13 @@
; Supported features of 'ISA-L' compression driver.
;
[Features]
-CPU SSE = Y
-CPU AVX = Y
-CPU AVX2 = Y
-CPU AVX512 = Y
-Deflate = Y
-Fixed = Y
-Dynamic = Y
+CPU SSE = Y
+CPU AVX = Y
+CPU AVX2 = Y
+CPU AVX512 = Y
+OOP SGL In SGL Out = Y
+OOP SGL In LB Out = Y
+OOP LB In SGL Out = Y
+Deflate = Y
+Fixed = Y
+Dynamic = Y
diff --git a/doc/guides/compressdevs/isal.rst b/doc/guides/compressdevs/isal.rst
index 276ff06..3bc3022 100644
--- a/doc/guides/compressdevs/isal.rst
+++ b/doc/guides/compressdevs/isal.rst
@@ -78,8 +78,6 @@ As a result the level mappings from the API to the PMD are shown below.
Limitations
-----------
-* Chained mbufs will not be supported until a future release, meaning max data size being passed to PMD through a single mbuf is 64K - 1. If data is larger than this it will need to be split up and sent as multiple operations.
-
* Compressdev level 0, no compression, is not supported.
* Checksums will not be supported until future release.
diff --git a/drivers/compress/isal/isal_compress_pmd.c b/drivers/compress/isal/isal_compress_pmd.c
index 5966cc3..a776019 100644
--- a/drivers/compress/isal/isal_compress_pmd.c
+++ b/drivers/compress/isal/isal_compress_pmd.c
@@ -188,6 +188,206 @@ isal_comp_set_priv_xform_parameters(struct isal_priv_xform *priv_xform,
return 0;
}
+/* Compression using chained mbufs for input/output data */
+static int
+chained_mbuf_compression(struct rte_comp_op *op, struct isal_comp_qp *qp)
+{
+ int ret;
+ uint32_t remaining_offset;
+ uint32_t remaining_data = op->src.length;
+ struct rte_mbuf *src = op->m_src;
+ struct rte_mbuf *dst = op->m_dst;
+
+ /* check for offset passing multiple segments
+ * and point compression stream to input/output buffer
+ */
+ if (op->src.offset > src->data_len) {
+ remaining_offset = op->src.offset;
+ while (remaining_offset > src->data_len) {
+ remaining_offset -= src->data_len;
+ src = src->next;
+ }
+
+
+ qp->stream->avail_in = src->data_len - remaining_offset;
+ qp->stream->next_in = rte_pktmbuf_mtod_offset(src, uint8_t *,
+ (op->src.offset % src->data_len));
+ } else {
+ qp->stream->avail_in = src->data_len - op->src.offset;
+ qp->stream->next_in = rte_pktmbuf_mtod_offset(src, uint8_t *,
+ op->src.offset);
+ }
+
+ if (op->dst.offset > dst->data_len) {
+ remaining_offset = op->dst.offset;
+ while (remaining_offset > dst->data_len) {
+ remaining_offset -= dst->data_len;
+ dst = dst->next;
+ }
+
+ qp->stream->avail_out = dst->data_len - remaining_offset;
+ qp->stream->next_out = rte_pktmbuf_mtod_offset(dst, uint8_t *,
+ (op->dst.offset % dst->data_len));
+ } else {
+ qp->stream->avail_out = dst->data_len - op->dst.offset;
+ qp->stream->next_out = rte_pktmbuf_mtod_offset(dst, uint8_t *,
+ op->dst.offset);
+ }
+
+ if (unlikely(!qp->stream->next_in || !qp->stream->next_out)) {
+ ISAL_PMD_LOG(ERR, "Invalid source or destination buffer\n");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return -1;
+ }
+
+ while (qp->stream->internal_state.state != ZSTATE_END) {
+ /* Last segment of data */
+ if (remaining_data <= src->data_len)
+ qp->stream->end_of_stream = 1;
+
+ /* Execute compression operation */
+ ret = isal_deflate(qp->stream);
+
+ remaining_data = op->src.length - qp->stream->total_in;
+
+ if (ret != COMP_OK) {
+ ISAL_PMD_LOG(ERR, "Compression operation failed\n");
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+ return ret;
+ }
+
+ if (qp->stream->avail_in == 0 &&
+ qp->stream->total_in != op->src.length) {
+ if (src->next != NULL) {
+ src = src->next;
+ qp->stream->next_in =
+ rte_pktmbuf_mtod(src, uint8_t *);
+ qp->stream->avail_in =
+ RTE_MIN(remaining_data, src->data_len);
+ } else {
+ ISAL_PMD_LOG(ERR,
+ "Not enough input buffer segments\n");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return -1;
+ }
+ }
+
+ if (qp->stream->avail_out == 0 &&
+ qp->stream->internal_state.state != ZSTATE_END) {
+ if (dst->next != NULL) {
+ dst = dst->next;
+ qp->stream->next_out =
+ rte_pktmbuf_mtod(dst, uint8_t *);
+ qp->stream->avail_out = dst->data_len;
+ } else {
+ ISAL_PMD_LOG(ERR,
+ "Not enough output buffer segments\n");
+ op->status =
+ RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED;
+ return -1;
+ }
+ }
+ }
+ op->consumed = qp->stream->total_in;
+ op->produced = qp->stream->total_out;
+
+ return 0;
+}
+
+/* Decompression using chained mbufs for input/output data */
+static int
+chained_mbuf_decompression(struct rte_comp_op *op, struct isal_comp_qp *qp)
+{
+ int ret;
+ uint32_t consumed_data, remaining_offset;
+ uint32_t remaining_data = op->src.length;
+ struct rte_mbuf *src = op->m_src;
+ struct rte_mbuf *dst = op->m_dst;
+
+ /* check for offset passing multiple segments
+ * and point decompression state to input/output buffer
+ */
+ if (op->src.offset > src->data_len) {
+ remaining_offset = op->src.offset;
+ while (remaining_offset > src->data_len) {
+ remaining_offset -= src->data_len;
+ src = src->next;
+ }
+
+ qp->state->avail_in = src->data_len - remaining_offset;
+ qp->state->next_in = rte_pktmbuf_mtod_offset(src,
+ uint8_t *, (op->src.offset % src->data_len));
+ } else {
+ qp->state->avail_in = src->data_len - op->src.offset;
+ qp->state->next_in = rte_pktmbuf_mtod_offset(src, uint8_t *,
+ op->src.offset);
+ }
+ if (op->dst.offset > dst->data_len) {
+ remaining_offset = op->dst.offset;
+ while (remaining_offset > dst->data_len) {
+ remaining_offset -= dst->data_len;
+ dst = dst->next;
+ }
+
+ qp->state->avail_out = dst->data_len - remaining_offset;
+ qp->state->next_out = rte_pktmbuf_mtod_offset(dst, uint8_t *,
+ (op->dst.offset % dst->data_len));
+ } else {
+ qp->state->avail_out = dst->data_len - op->dst.offset;
+ qp->state->next_out = rte_pktmbuf_mtod_offset(dst, uint8_t *,
+ op->dst.offset);
+ }
+ while (qp->state->block_state != ISAL_BLOCK_FINISH) {
+
+ ret = isal_inflate(qp->state);
+
+ if (remaining_data == op->src.length) {
+ consumed_data = src->data_len - qp->state->avail_in -
+ (op->src.offset % src->data_len);
+ } else
+ consumed_data = src->data_len - qp->state->avail_in;
+
+ op->consumed += consumed_data;
+ remaining_data -= consumed_data;
+
+ if (ret != ISAL_DECOMP_OK) {
+ ISAL_PMD_LOG(ERR, "Decompression operation failed\n");
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+ return ret;
+ }
+
+ if (qp->state->avail_in == 0
+ && op->consumed != op->src.length) {
+ if (src->next != NULL) {
+ src = src->next;
+ qp->state->next_in =
+ rte_pktmbuf_mtod(src, uint8_t *);
+ qp->state->avail_in =
+ RTE_MIN(remaining_data, src->data_len);
+ }
+ }
+
+ if (qp->state->avail_out == 0 &&
+ qp->state->block_state != ISAL_BLOCK_FINISH) {
+ if (dst->next != NULL) {
+ dst = dst->next;
+ qp->state->next_out =
+ rte_pktmbuf_mtod(dst, uint8_t *);
+ qp->state->avail_out = dst->data_len;
+ } else {
+ ISAL_PMD_LOG(ERR,
+ "Not enough output buffer segments\n");
+ op->status =
+ RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED;
+ return -1;
+ }
+ }
+ }
+ op->produced = qp->state->total_out;
+
+ return 0;
+}
+
/* Stateless Compression Function */
static int
process_isal_deflate(struct rte_comp_op *op, struct isal_comp_qp *qp,
@@ -207,7 +407,7 @@ process_isal_deflate(struct rte_comp_op *op, struct isal_comp_qp *qp,
/* Stateless operation, input will be consumed in one go */
qp->stream->flush = NO_FLUSH;
- /* set op level & intermediate level buffer */
+ /* set compression level & intermediate level buffer size */
qp->stream->level = priv_xform->compress.level;
qp->stream->level_buf_size = priv_xform->level_buffer_size;
@@ -225,59 +425,70 @@ process_isal_deflate(struct rte_comp_op *op, struct isal_comp_qp *qp,
isal_deflate_set_hufftables(qp->stream, NULL,
IGZIP_HUFFTABLE_DEFAULT);
- qp->stream->end_of_stream = 1; /* All input consumed in one go */
- if ((op->src.length + op->src.offset) > op->m_src->data_len) {
- ISAL_PMD_LOG(ERR, "Input mbuf not big enough for the length and"
- " offset provided.\n");
- op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
- return -1;
- }
- /* Point compression stream to input buffer */
- qp->stream->avail_in = op->src.length;
- qp->stream->next_in = rte_pktmbuf_mtod_offset(op->m_src, uint8_t *,
- op->src.offset);
-
- if (op->dst.offset > op->m_dst->data_len) {
- ISAL_PMD_LOG(ERR, "Output mbuf not big enough for the length"
- " and offset provided.\n");
+ if (op->m_src->pkt_len < (op->src.length + op->src.offset)) {
+ ISAL_PMD_LOG(ERR, "Input mbuf(s) not big enough.\n");
op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
return -1;
}
- /* Point compression stream to output buffer */
- qp->stream->avail_out = op->m_dst->data_len - op->dst.offset;
- qp->stream->next_out = rte_pktmbuf_mtod_offset(op->m_dst, uint8_t *,
- op->dst.offset);
- if (unlikely(!qp->stream->next_in || !qp->stream->next_out)) {
- ISAL_PMD_LOG(ERR, "Invalid source or destination buffers\n");
- op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
- return -1;
- }
+ /* Chained mbufs */
+ if (op->m_src->nb_segs > 1 || op->m_dst->nb_segs > 1) {
+ ret = chained_mbuf_compression(op, qp);
+ if (ret < 0)
+ return ret;
+ } else {
+ /* Linear buffer */
+ qp->stream->end_of_stream = 1; /* All input consumed in one */
+ /* Point compression stream to input buffer */
+ qp->stream->avail_in = op->src.length;
+ qp->stream->next_in = rte_pktmbuf_mtod_offset(op->m_src,
+ uint8_t *, op->src.offset);
+
+ if (op->dst.offset > op->m_dst->data_len) {
+ ISAL_PMD_LOG(ERR, "Output mbuf not big enough for "
+ "length and offset provided.\n");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return -1;
+ }
+ /* Point compression stream to output buffer */
+ qp->stream->avail_out = op->m_dst->data_len - op->dst.offset;
+ qp->stream->next_out = rte_pktmbuf_mtod_offset(op->m_dst,
+ uint8_t *, op->dst.offset);
+
+ if (unlikely(!qp->stream->next_in || !qp->stream->next_out)) {
+ ISAL_PMD_LOG(ERR, "Invalid source or destination"
+ " buffers\n");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return -1;
+ }
- /* Execute compression operation */
- ret = isal_deflate_stateless(qp->stream);
+ /* Execute compression operation */
+ ret = isal_deflate_stateless(qp->stream);
- /* Check that output buffer did not run out of space */
- if (ret == STATELESS_OVERFLOW) {
- ISAL_PMD_LOG(ERR, "Output buffer not big enough\n");
- op->status = RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED;
- return ret;
- }
+ /* Check that output buffer did not run out of space */
+ if (ret == STATELESS_OVERFLOW) {
+ ISAL_PMD_LOG(ERR, "Output buffer not big enough\n");
+ op->status = RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED;
+ return ret;
+ }
- /* Check that input buffer has been fully consumed */
- if (qp->stream->avail_in != (uint32_t)0) {
- ISAL_PMD_LOG(ERR, "Input buffer could not be read entirely\n");
- op->status = RTE_COMP_OP_STATUS_ERROR;
- return -1;
- }
+ /* Check that input buffer has been fully consumed */
+ if (qp->stream->avail_in != (uint32_t)0) {
+ ISAL_PMD_LOG(ERR, "Input buffer could not be read"
+ " entirely\n");
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+ return -1;
+ }
- if (ret != COMP_OK) {
- op->status = RTE_COMP_OP_STATUS_ERROR;
- return ret;
- }
+ if (ret != COMP_OK) {
+ ISAL_PMD_LOG(ERR, "Compression operation failed\n");
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+ return ret;
+ }
- op->consumed = qp->stream->total_in;
- op->produced = qp->stream->total_out;
+ op->consumed = qp->stream->total_in;
+ op->produced = qp->stream->total_out;
+ }
return ret;
}
@@ -293,59 +504,69 @@ process_isal_inflate(struct rte_comp_op *op, struct isal_comp_qp *qp)
/* Initialize decompression state */
isal_inflate_init(qp->state);
- if ((op->src.length + op->src.offset) > op->m_src->data_len) {
- ISAL_PMD_LOG(ERR, "Input mbuf not big enough for the length and"
- " offset provided.\n");
- op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
- return -1;
- }
- /* Point decompression state to input buffer */
- qp->state->avail_in = op->src.length;
- qp->state->next_in = rte_pktmbuf_mtod_offset(op->m_src, uint8_t *,
- op->src.offset);
-
- if (op->dst.offset > op->m_dst->data_len) {
- ISAL_PMD_LOG(ERR, "Output mbuf not big enough for the length "
- "and offset provided.\n");
+ if (op->m_src->pkt_len < (op->src.length + op->src.offset)) {
+ ISAL_PMD_LOG(ERR, "Input mbuf(s) not big enough.\n");
op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
return -1;
}
- /* Point decompression state to output buffer */
- qp->state->avail_out = op->m_dst->data_len - op->dst.offset;
- qp->state->next_out = rte_pktmbuf_mtod_offset(op->m_dst, uint8_t *,
- op->dst.offset);
- if (unlikely(!qp->state->next_in || !qp->state->next_out)) {
- ISAL_PMD_LOG(ERR, "Invalid source or destination buffers\n");
- op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
- return -1;
- }
+ /* Chained mbufs */
+ if (op->m_src->nb_segs > 1 || op->m_dst->nb_segs > 1) {
+ ret = chained_mbuf_decompression(op, qp);
+ if (ret != 0)
+ return ret;
+ } else {
+ /* Linear buffer */
+ /* Point decompression state to input buffer */
+ qp->state->avail_in = op->src.length;
+ qp->state->next_in = rte_pktmbuf_mtod_offset(op->m_src,
+ uint8_t *, op->src.offset);
+
+ if (op->dst.offset > op->m_dst->data_len) {
+ ISAL_PMD_LOG(ERR, "Output mbuf not big enough for "
+ "length and offset provided.\n");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return -1;
+ }
+ /* Point decompression state to output buffer */
+ qp->state->avail_out = op->m_dst->data_len - op->dst.offset;
+ qp->state->next_out = rte_pktmbuf_mtod_offset(op->m_dst,
+ uint8_t *, op->dst.offset);
+
+ if (unlikely(!qp->state->next_in || !qp->state->next_out)) {
+ ISAL_PMD_LOG(ERR, "Invalid source or destination"
+ " buffers\n");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return -1;
+ }
- /* Execute decompression operation */
- ret = isal_inflate_stateless(qp->state);
+ /* Execute decompression operation */
+ ret = isal_inflate_stateless(qp->state);
- if (ret == ISAL_OUT_OVERFLOW) {
- ISAL_PMD_LOG(ERR, "Output buffer not big enough\n");
- op->status = RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED;
- return ret;
- }
+ if (ret == ISAL_OUT_OVERFLOW) {
+ ISAL_PMD_LOG(ERR, "Output buffer not big enough\n");
+ op->status = RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED;
+ return ret;
+ }
- /* Check that input buffer has been fully consumed */
- if (qp->state->avail_in != (uint32_t)0) {
- ISAL_PMD_LOG(ERR, "Input buffer could not be read entirely\n");
- op->status = RTE_COMP_OP_STATUS_ERROR;
- return -1;
- }
+ /* Check that input buffer has been fully consumed */
+ if (qp->state->avail_in != (uint32_t)0) {
+ ISAL_PMD_LOG(ERR, "Input buffer could not be read"
+ " entirely\n");
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+ return -1;
+ }
- if (ret != ISAL_DECOMP_OK) {
- op->status = RTE_COMP_OP_STATUS_ERROR;
- return ret;
- }
+ if (ret != ISAL_DECOMP_OK) {
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+ return ret;
+ }
- op->consumed = op->src.length - qp->state->avail_in;
- op->produced = qp->state->total_out;
+ op->consumed = op->src.length - qp->state->avail_in;
+ op->produced = qp->state->total_out;
+ }
-return ret;
+ return ret;
}
/* Process compression/decompression operation */
diff --git a/drivers/compress/isal/isal_compress_pmd_ops.c b/drivers/compress/isal/isal_compress_pmd_ops.c
index c61acd4..41cade8 100644
--- a/drivers/compress/isal/isal_compress_pmd_ops.c
+++ b/drivers/compress/isal/isal_compress_pmd_ops.c
@@ -12,7 +12,10 @@
static const struct rte_compressdev_capabilities isal_pmd_capabilities[] = {
{
.algo = RTE_COMP_ALGO_DEFLATE,
- .comp_feature_flags = RTE_COMP_FF_SHAREABLE_PRIV_XFORM |
+ .comp_feature_flags = RTE_COMP_FF_OOP_SGL_IN_SGL_OUT |
+ RTE_COMP_FF_OOP_SGL_IN_LB_OUT |
+ RTE_COMP_FF_OOP_LB_IN_SGL_OUT |
+ RTE_COMP_FF_SHAREABLE_PRIV_XFORM |
RTE_COMP_FF_HUFFMAN_FIXED |
RTE_COMP_FF_HUFFMAN_DYNAMIC,
.window_size = {
--
2.7.4
next prev parent reply other threads:[~2018-07-23 18:03 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-05 11:03 [dpdk-dev] [PATCH] " Lee Daly
2018-07-11 12:40 ` [dpdk-dev] [PATCH v2] " Lee, Daly
2018-07-20 10:38 ` De Lara Guarch, Pablo
2018-07-23 18:02 ` Daly, Lee [this message]
2018-07-23 21:14 ` [dpdk-dev] [PATCH v3] " De Lara Guarch, Pablo
2018-07-24 11:19 ` [dpdk-dev] [PATCH v4] " Daly, Lee
2018-07-24 13:27 ` De Lara Guarch, Pablo
2018-07-24 13:36 ` De Lara Guarch, Pablo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1532368945-23909-1-git-send-email-lee.daly@intel.com \
--to=lee.daly@intel.com \
--cc=dev@dpdk.org \
--cc=pablo.de.lara.guarch@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).