DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jananee Parthasarathy <jananeex.m.parthasarathy@intel.com>
To: dev@dpdk.org
Cc: reshma.pattan@intel.com,
	Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Subject: [dpdk-dev] [PATCH v2] test: restructure and cleanup ring PMD test
Date: Wed, 26 Sep 2018 14:11:25 +0100	[thread overview]
Message-ID: <1537967485-20619-1-git-send-email-jananeex.m.parthasarathy@intel.com> (raw)
In-Reply-To: <1537449810-23573-1-git-send-email-jananeex.m.parthasarathy@intel.com>

From: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>

Divided main test to smaller logical tests.
Registered with UT framework.
Added cleanup of the resources else ring creation fails
during consecutive test runs.
Freed the allocated mempool, rings and uninitalized the drivers.

Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
---
v2: Corrected the tab spaces.
---
  
 test/test/test_pmd_ring.c | 326 +++++++++++++++++++++++++++-------------------
 1 file changed, 195 insertions(+), 131 deletions(-)

diff --git a/test/test/test_pmd_ring.c b/test/test/test_pmd_ring.c
index 19d7d20a0..6414bbd18 100644
--- a/test/test/test_pmd_ring.c
+++ b/test/test/test_pmd_ring.c
@@ -2,20 +2,22 @@
  * Copyright(c) 2010-2015 Intel Corporation
  */
 #include "test.h"
+#include <string.h>
 
 #include <stdio.h>
 
 #include <rte_eth_ring.h>
 #include <rte_ethdev.h>
-
-static struct rte_mempool *mp;
-static int tx_porta, rx_portb, rxtx_portc, rxtx_portd, rxtx_porte;
+#include <rte_bus_vdev.h>
 
 #define SOCKET0 0
 #define RING_SIZE 256
 #define NUM_RINGS 2
 #define NB_MBUF 512
 
+static struct rte_mempool *mp;
+struct rte_ring *rxtx[NUM_RINGS];
+static int tx_porta, rx_portb, rxtx_portc, rxtx_portd, rxtx_porte;
 
 static int
 test_ethdev_configure_port(int port)
@@ -42,7 +44,7 @@ test_ethdev_configure_port(int port)
 	}
 
 	if (rte_eth_rx_queue_setup(port, 0, RING_SIZE, SOCKET0,
-			NULL, mp) < 0) {
+				NULL, mp) < 0) {
 		printf("RX queue setup failed port %d\n", port);
 		return -1;
 	}
@@ -71,21 +73,21 @@ test_send_basic_packets(void)
 
 	if (rte_eth_tx_burst(tx_porta, 0, pbufs, RING_SIZE/2) < RING_SIZE/2) {
 		printf("Failed to transmit packet burst port %d\n", tx_porta);
-		return -1;
+		return TEST_FAILED;
 	}
 
 	if (rte_eth_rx_burst(rx_portb, 0, pbufs, RING_SIZE) != RING_SIZE/2) {
 		printf("Failed to receive packet burst on port %d\n", rx_portb);
-		return -1;
+		return TEST_FAILED;
 	}
 
 	for (i = 0; i < RING_SIZE/2; i++)
 		if (pbufs[i] != &bufs[i]) {
 			printf("Error: received data does not match that transmitted\n");
-			return -1;
+			return TEST_FAILED;
 		}
 
-	return 0;
+	return TEST_SUCCESS;
 }
 
 static int
@@ -212,7 +214,7 @@ test_stats_reset(int port)
 }
 
 static int
-test_pmd_ring_pair_create_attach(int portd, int porte)
+test_pmd_ring_pair_create_attach(void)
 {
 	struct rte_eth_stats stats, stats2;
 	struct rte_mbuf buf, *pbuf = &buf;
@@ -220,185 +222,218 @@ test_pmd_ring_pair_create_attach(int portd, int porte)
 
 	memset(&null_conf, 0, sizeof(struct rte_eth_conf));
 
-	if ((rte_eth_dev_configure(portd, 1, 1, &null_conf) < 0)
-		|| (rte_eth_dev_configure(porte, 1, 1, &null_conf) < 0)) {
+	if ((rte_eth_dev_configure(rxtx_portd, 1, 1, &null_conf) < 0)
+			|| (rte_eth_dev_configure(rxtx_porte, 1, 1,
+					&null_conf) < 0)) {
 		printf("Configure failed for port\n");
-		return -1;
+		return TEST_FAILED;
 	}
 
-	if ((rte_eth_tx_queue_setup(portd, 0, RING_SIZE, SOCKET0, NULL) < 0)
-		|| (rte_eth_tx_queue_setup(porte, 0, RING_SIZE, SOCKET0, NULL) < 0)) {
+	if ((rte_eth_tx_queue_setup(rxtx_portd, 0, RING_SIZE,
+					SOCKET0, NULL) < 0)
+			|| (rte_eth_tx_queue_setup(rxtx_porte, 0, RING_SIZE,
+					SOCKET0, NULL) < 0)) {
 		printf("TX queue setup failed\n");
-		return -1;
+		return TEST_FAILED;
 	}
 
-	if ((rte_eth_rx_queue_setup(portd, 0, RING_SIZE, SOCKET0, NULL, mp) < 0)
-		|| (rte_eth_rx_queue_setup(porte, 0, RING_SIZE, SOCKET0, NULL, mp) < 0)) {
+	if ((rte_eth_rx_queue_setup(rxtx_portd, 0, RING_SIZE,
+					SOCKET0, NULL, mp) < 0)
+			|| (rte_eth_rx_queue_setup(rxtx_porte, 0, RING_SIZE,
+					SOCKET0, NULL, mp) < 0)) {
 		printf("RX queue setup failed\n");
-		return -1;
+		return TEST_FAILED;
 	}
 
-	if ((rte_eth_dev_start(portd) < 0)
-		|| (rte_eth_dev_start(porte) < 0)) {
+	if ((rte_eth_dev_start(rxtx_portd) < 0)
+			|| (rte_eth_dev_start(rxtx_porte) < 0)) {
 		printf("Error starting port\n");
-		return -1;
+		return TEST_FAILED;
 	}
 
-	rte_eth_stats_reset(portd);
+	rte_eth_stats_reset(rxtx_portd);
 	/* check stats of port, should all be zero */
-	rte_eth_stats_get(portd, &stats);
+	rte_eth_stats_get(rxtx_portd, &stats);
 	if (stats.ipackets != 0 || stats.opackets != 0 ||
 			stats.ibytes != 0 || stats.obytes != 0 ||
 			stats.ierrors != 0 || stats.oerrors != 0) {
-		printf("Error: port %d stats are not zero\n", portd);
-		return -1;
+		printf("Error: port %d stats are not zero\n", rxtx_portd);
+		return TEST_FAILED;
 	}
 
-	rte_eth_stats_reset(porte);
+	rte_eth_stats_reset(rxtx_porte);
 	/* check stats of port, should all be zero */
-	rte_eth_stats_get(porte, &stats2);
+	rte_eth_stats_get(rxtx_porte, &stats2);
 	if (stats2.ipackets != 0 || stats2.opackets != 0 ||
 			stats2.ibytes != 0 || stats2.obytes != 0 ||
 			stats2.ierrors != 0 || stats2.oerrors != 0) {
-		printf("Error: port %d stats are not zero\n", porte);
-		return -1;
+		printf("Error: port %d stats are not zero\n", rxtx_porte);
+		return TEST_FAILED;
 	}
 
 	/*
-	 * send and receive 1 packet (portd -> porte)
+	 * send and receive 1 packet (rxtx_portd -> rxtx_porte)
 	 * and check for stats update
 	 */
-	printf("Testing send and receive 1 packet (portd -> porte)\n");
-	if (rte_eth_tx_burst(portd, 0, &pbuf, 1) != 1) {
-		printf("Error sending packet to port %d\n", portd);
-		return -1;
+	printf("Testing send and receive 1 packet (rxtx_portd -> rxtx_porte)\n");
+	if (rte_eth_tx_burst(rxtx_portd, 0, &pbuf, 1) != 1) {
+		printf("Error sending packet to port %d\n", rxtx_portd);
+		return TEST_FAILED;
 	}
 
-	if (rte_eth_rx_burst(porte, 0, &pbuf, 1) != 1) {
-		printf("Error receiving packet from port %d\n", porte);
-		return -1;
+	if (rte_eth_rx_burst(rxtx_porte, 0, &pbuf, 1) != 1) {
+		printf("Error receiving packet from port %d\n", rxtx_porte);
+		return TEST_FAILED;
 	}
 
-	rte_eth_stats_get(portd, &stats);
-	rte_eth_stats_get(porte, &stats2);
+	rte_eth_stats_get(rxtx_portd, &stats);
+	rte_eth_stats_get(rxtx_porte, &stats2);
 	if (stats.ipackets != 0 || stats.opackets != 1 ||
 			stats.ibytes != 0 || stats.obytes != 0 ||
 			stats.ierrors != 0 || stats.oerrors != 0) {
-		printf("Error: port %d stats are not as expected\n", portd);
-		return -1;
+		printf("Error: port %d stats are not as expected\n",
+				rxtx_portd);
+		return TEST_FAILED;
 	}
 
 	if (stats2.ipackets != 1 || stats2.opackets != 0 ||
 			stats2.ibytes != 0 || stats2.obytes != 0 ||
 			stats2.ierrors != 0 || stats2.oerrors != 0) {
-		printf("Error: port %d stats are not as expected\n", porte);
-		return -1;
+		printf("Error: port %d stats are not as expected\n",
+				rxtx_porte);
+		return TEST_FAILED;
 	}
 
 	/*
-	 * send and receive 1 packet (porte -> portd)
+	 * send and receive 1 packet (rxtx_porte -> rxtx_portd)
 	 * and check for stats update
 	 */
-	printf("Testing send and receive 1 packet (porte -> portd)\n");
-	if (rte_eth_tx_burst(porte, 0, &pbuf, 1) != 1) {
-		printf("Error sending packet to port %d\n", porte);
-		return -1;
+	printf("Testing send and receive 1 packet "
+			"(rxtx_porte -> rxtx_portd)\n");
+	if (rte_eth_tx_burst(rxtx_porte, 0, &pbuf, 1) != 1) {
+		printf("Error sending packet to port %d\n", rxtx_porte);
+		return TEST_FAILED;
 	}
 
-	if (rte_eth_rx_burst(portd, 0, &pbuf, 1) != 1) {
-		printf("Error receiving packet from port %d\n", portd);
-		return -1;
+	if (rte_eth_rx_burst(rxtx_portd, 0, &pbuf, 1) != 1) {
+		printf("Error receiving packet from port %d\n", rxtx_portd);
+		return TEST_FAILED;
 	}
 
-	rte_eth_stats_get(portd, &stats);
-	rte_eth_stats_get(porte, &stats2);
+	rte_eth_stats_get(rxtx_portd, &stats);
+	rte_eth_stats_get(rxtx_porte, &stats2);
 	if (stats.ipackets != 1 || stats.opackets != 1 ||
 			stats.ibytes != 0 || stats.obytes != 0 ||
 			stats.ierrors != 0 || stats.oerrors != 0) {
-		printf("Error: port %d stats are not as expected\n", portd);
-		return -1;
+		printf("Error: port %d stats are not as expected\n",
+				rxtx_portd);
+		return TEST_FAILED;
 	}
 
 	if (stats2.ipackets != 1 || stats2.opackets != 1 ||
 			stats2.ibytes != 0 || stats2.obytes != 0 ||
 			stats2.ierrors != 0 || stats2.oerrors != 0) {
-		printf("Error: port %d stats are not as expected\n", porte);
-		return -1;
+		printf("Error: port %d stats are not as expected\n",
+				rxtx_porte);
+		return TEST_FAILED;
 	}
 
 	/*
-	 * send and receive 1 packet (portd -> portd)
+	 * send and receive 1 packet (rxtx_portd -> rxtx_portd)
 	 * and check for stats update
 	 */
-	printf("Testing send and receive 1 packet (portd -> portd)\n");
-	if (rte_eth_tx_burst(portd, 0, &pbuf, 1) != 1) {
-		printf("Error sending packet to port %d\n", portd);
-		return -1;
+	printf("Testing send and receive 1 packet "
+			"(rxtx_portd -> rxtx_portd)\n");
+	if (rte_eth_tx_burst(rxtx_portd, 0, &pbuf, 1) != 1) {
+		printf("Error sending packet to port %d\n", rxtx_portd);
+		return TEST_FAILED;
 	}
 
-	if (rte_eth_rx_burst(portd, 0, &pbuf, 1) != 1) {
-		printf("Error receiving packet from port %d\n", porte);
-		return -1;
+	if (rte_eth_rx_burst(rxtx_portd, 0, &pbuf, 1) != 1) {
+		printf("Error receiving packet from port %d\n", rxtx_porte);
+		return TEST_FAILED;
 	}
 
-	rte_eth_stats_get(portd, &stats);
-	rte_eth_stats_get(porte, &stats2);
+	rte_eth_stats_get(rxtx_portd, &stats);
+	rte_eth_stats_get(rxtx_porte, &stats2);
 	if (stats.ipackets != 2 || stats.opackets != 2 ||
 			stats.ibytes != 0 || stats.obytes != 0 ||
 			stats.ierrors != 0 || stats.oerrors != 0) {
-		printf("Error: port %d stats are not as expected\n", portd);
-		return -1;
+		printf("Error: port %d stats are not as expected\n",
+				rxtx_portd);
+		return TEST_FAILED;
 	}
 
 	if (stats2.ipackets != 1 || stats2.opackets != 1 ||
 			stats2.ibytes != 0 || stats2.obytes != 0 ||
 			stats2.ierrors != 0 || stats2.oerrors != 0) {
-		printf("Error: port %d stats are not as expected\n", porte);
-		return -1;
+		printf("Error: port %d stats are not as expected\n",
+				rxtx_porte);
+		return TEST_FAILED;
 	}
 
 	/*
-	 * send and receive 1 packet (porte -> porte)
+	 * send and receive 1 packet (rxtx_porte -> rxtx_porte)
 	 * and check for stats update
 	 */
-	printf("Testing send and receive 1 packet (porte -> porte)\n");
-	if (rte_eth_tx_burst(porte, 0, &pbuf, 1) != 1) {
-		printf("Error sending packet to port %d\n", porte);
-		return -1;
+	printf("Testing send and receive 1 packet "
+			"(rxtx_porte -> rxtx_porte)\n");
+	if (rte_eth_tx_burst(rxtx_porte, 0, &pbuf, 1) != 1) {
+		printf("Error sending packet to port %d\n", rxtx_porte);
+		return TEST_FAILED;
 	}
 
-	if (rte_eth_rx_burst(porte, 0, &pbuf, 1) != 1) {
-		printf("Error receiving packet from port %d\n", porte);
-		return -1;
+	if (rte_eth_rx_burst(rxtx_porte, 0, &pbuf, 1) != 1) {
+		printf("Error receiving packet from port %d\n", rxtx_porte);
+		return TEST_FAILED;
 	}
 
-	rte_eth_stats_get(portd, &stats);
-	rte_eth_stats_get(porte, &stats2);
+	rte_eth_stats_get(rxtx_portd, &stats);
+	rte_eth_stats_get(rxtx_porte, &stats2);
 	if (stats.ipackets != 2 || stats.opackets != 2 ||
 			stats.ibytes != 0 || stats.obytes != 0 ||
 			stats.ierrors != 0 || stats.oerrors != 0) {
-		printf("Error: port %d stats are not as expected\n", portd);
-		return -1;
+		printf("Error: port %d stats are not as expected\n",
+				rxtx_portd);
+		return TEST_FAILED;
 	}
 
 	if (stats2.ipackets != 2 || stats2.opackets != 2 ||
 			stats2.ibytes != 0 || stats2.obytes != 0 ||
 			stats2.ierrors != 0 || stats2.oerrors != 0) {
-		printf("Error: port %d stats are not as expected\n", porte);
-		return -1;
+		printf("Error: port %d stats are not as expected\n",
+				rxtx_porte);
+		return TEST_FAILED;
 	}
 
-	rte_eth_dev_stop(portd);
-	rte_eth_dev_stop(porte);
+	rte_eth_dev_stop(rxtx_portd);
+	rte_eth_dev_stop(rxtx_porte);
 
-	return 0;
+	return TEST_SUCCESS;
+}
+
+static void
+test_cleanup_resources(void)
+{
+	int itr;
+	for (itr = 0; itr < NUM_RINGS; itr++)
+		rte_ring_free(rxtx[itr]);
+
+	rte_eth_dev_stop(tx_porta);
+	rte_eth_dev_stop(rx_portb);
+	rte_eth_dev_stop(rxtx_portc);
+
+	rte_mempool_free(mp);
+	rte_vdev_uninit("net_ring_net_ringa");
+	rte_vdev_uninit("net_ring_net_ringb");
+	rte_vdev_uninit("net_ring_net_ringc");
+	rte_vdev_uninit("net_ring_net_ringd");
+	rte_vdev_uninit("net_ring_net_ringe");
 }
 
 static int
-test_pmd_ring(void)
+test_pmd_ringcreate_setup(void)
 {
-	struct rte_ring *rxtx[NUM_RINGS];
-	int port, cmdl_port0 = -1;
 	uint8_t nb_ports;
 
 	nb_ports = rte_eth_dev_count_avail();
@@ -431,53 +466,33 @@ test_pmd_ring(void)
 			tx_porta, rx_portb, rxtx_portc, rxtx_portd, rxtx_porte);
 
 	if ((tx_porta == -1) || (rx_portb == -1) || (rxtx_portc == -1)
-		|| (rxtx_portd == -1) || (rxtx_porte == -1)) {
+			|| (rxtx_portd == -1) || (rxtx_porte == -1)) {
 		printf("rte_eth_from rings failed\n");
 		return -1;
 	}
 
 	mp = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32,
-		0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
+			0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
 	if (mp == NULL)
 		return -1;
 
 	if ((tx_porta >= RTE_MAX_ETHPORTS) || (rx_portb >= RTE_MAX_ETHPORTS)
-		|| (rxtx_portc >= RTE_MAX_ETHPORTS)
-		|| (rxtx_portd >= RTE_MAX_ETHPORTS)
-		|| (rxtx_porte >= RTE_MAX_ETHPORTS)) {
+			|| (rxtx_portc >= RTE_MAX_ETHPORTS)
+			|| (rxtx_portd >= RTE_MAX_ETHPORTS)
+			|| (rxtx_porte >= RTE_MAX_ETHPORTS)) {
 		printf(" port exceed max eth ports\n");
 		return -1;
 	}
+	return 0;
+}
 
-	if (test_ethdev_configure_port(tx_porta) < 0)
-		return -1;
-
-	if (test_ethdev_configure_port(rx_portb) < 0)
-		return -1;
-
-	if (test_ethdev_configure_port(rxtx_portc) < 0)
-		return -1;
-
-	if (test_send_basic_packets() < 0)
-		return -1;
-
-	if (test_get_stats(rxtx_portc) < 0)
-		return -1;
-
-	if (test_stats_reset(rxtx_portc) < 0)
-		return -1;
-
-	rte_eth_dev_stop(tx_porta);
-	rte_eth_dev_stop(rx_portb);
-	rte_eth_dev_stop(rxtx_portc);
-
-	if (test_pmd_ring_pair_create_attach(rxtx_portd, rxtx_porte) < 0)
-		return -1;
-
+static int
+test_command_line_ring_port(void)
+{
+	int port, cmdl_port0 = -1;
 	/* find a port created with the --vdev=net_ring0 command line option */
 	RTE_ETH_FOREACH_DEV(port) {
 		struct rte_eth_dev_info dev_info;
-
 		rte_eth_dev_info_get(port, &dev_info);
 		if (!strcmp(dev_info.driver_name, "Rings PMD")) {
 			printf("found a command line ring port=%d\n", port);
@@ -486,17 +501,66 @@ test_pmd_ring(void)
 		}
 	}
 	if (cmdl_port0 != -1) {
-		if (test_ethdev_configure_port(cmdl_port0) < 0)
-			return -1;
-		if (test_send_basic_packets_port(cmdl_port0) < 0)
-			return -1;
-		if (test_stats_reset(cmdl_port0) < 0)
-			return -1;
-		if (test_get_stats(cmdl_port0) < 0)
-			return -1;
+		TEST_ASSERT((test_ethdev_configure_port(cmdl_port0) < 0),
+				"test ethdev configure port cmdl_port0 is failed");
+		TEST_ASSERT((test_send_basic_packets_port(cmdl_port0) < 0),
+				"test send basic packets port cmdl_port0 is failed");
+		TEST_ASSERT((test_stats_reset(cmdl_port0) < 0),
+				"test stats reset cmdl_port0 is failed");
+		TEST_ASSERT((test_get_stats(cmdl_port0) < 0),
+				"test get stats cmdl_port0 is failed");
 		rte_eth_dev_stop(cmdl_port0);
 	}
-	return 0;
+	return TEST_SUCCESS;
+}
+
+static int
+test_ethdev_configure_ports(void)
+{
+	TEST_ASSERT((test_ethdev_configure_port(tx_porta) == 0),
+			"test ethdev configure ports tx_porta is failed");
+	TEST_ASSERT((test_ethdev_configure_port(rx_portb) == 0),
+			"test ethdev configure ports rx_portb is failed");
+	TEST_ASSERT((test_ethdev_configure_port(rxtx_portc) == 0),
+			"test ethdev configure ports rxtx_portc is failed");
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_get_stats_for_port(void)
+{
+	TEST_ASSERT(test_get_stats(rxtx_portc) == 0, "test get stats failed");
+	return TEST_SUCCESS;
+}
+
+static int
+test_stats_reset_for_port(void)
+{
+	TEST_ASSERT(test_stats_reset(rxtx_portc) == 0, "test stats reset failed");
+	return TEST_SUCCESS;
+}
+
+static struct
+unit_test_suite test_pmd_ring_suite  = {
+	.setup = test_pmd_ringcreate_setup,
+	.teardown = test_cleanup_resources,
+	.suite_name = "Test Pmd Ring Unit Test Suite",
+	.unit_test_cases = {
+		TEST_CASE(test_ethdev_configure_ports),
+		TEST_CASE(test_send_basic_packets),
+		TEST_CASE(test_get_stats_for_port),
+		TEST_CASE(test_stats_reset_for_port),
+		TEST_CASE(test_pmd_ring_pair_create_attach),
+		TEST_CASE(test_command_line_ring_port),
+		TEST_CASES_END()
+	}
+};
+
+static int
+test_pmd_ring(void)
+{
+	return unit_test_suite_runner(&test_pmd_ring_suite);
 }
 
 REGISTER_TEST_COMMAND(ring_pmd_autotest, test_pmd_ring);
-- 
2.13.6

  parent reply	other threads:[~2018-09-26 13:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-20 13:23 [dpdk-dev] [PATCH] " Jananee Parthasarathy
2018-09-20 14:07 ` Parthasarathy, JananeeX M
2018-09-26  9:38 ` Pattan, Reshma
2018-09-26 13:11 ` Jananee Parthasarathy [this message]
2018-10-09  9:07   ` [dpdk-dev] [PATCH v2] " Pattan, Reshma
2018-10-29  2:54   ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1537967485-20619-1-git-send-email-jananeex.m.parthasarathy@intel.com \
    --to=jananeex.m.parthasarathy@intel.com \
    --cc=dev@dpdk.org \
    --cc=reshma.pattan@intel.com \
    --cc=tallurix.chaitanya.babu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).