[dpdk-dev] [PATCH] doc: update for ENA supported drivers

[Rafal Kozik <rk@semihalf.com>]

Add instruction how to bind ENA to VFIO-PCI driver.

Fixes: cf8a122c296a ("ena: introduce documentation")
Cc: stable@dpdk.org

Signed-off-by: Zorik Machulsky <zorik@amazon.com>
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
---
 doc/guides/nics/ena.rst          | 12 +++++++++---
 doc/guides/nics/features/ena.ini |  1 +
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/doc/guides/nics/ena.rst b/doc/guides/nics/ena.rst
index d19912e..0dfefc6 100644
--- a/doc/guides/nics/ena.rst
+++ b/doc/guides/nics/ena.rst
@@ -187,11 +187,17 @@ Prerequisites
 -------------
 
 #. Prepare the system as recommended by DPDK suite.  This includes environment
-   variables, hugepages configuration, tool-chains and configuration
+   variables, hugepages configuration, tool-chains and configuration.
 
-#. Insert igb_uio kernel module using the command 'modprobe igb_uio'
+#. ENA PMD can operate with vfio-pci or igb_uio driver.
 
-#. Bind the intended ENA device to igb_uio module
+#. Insert vfio-pci or igb_uio kernel module using the command
+   'modprobe vfio-pci' or 'modprobe igb_uio' respectively.
+
+#. If vfio-pci driver is used please make sure noiommu mode is enabled:
+   echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
+
+#. Bind the intended ENA device to vfio-pci or igb_uio module.
 
 
 At this point the system should be ready to run DPDK applications. Once the
diff --git a/doc/guides/nics/features/ena.ini b/doc/guides/nics/features/ena.ini
index 691c1e3..aa6f05a 100644
--- a/doc/guides/nics/features/ena.ini
+++ b/doc/guides/nics/features/ena.ini
@@ -23,5 +23,6 @@ Inner L4 checksum    = Y
 Basic stats          = Y
 Extended stats       = Y
 Linux UIO            = Y
+Linux VFIO           = Y
 x86-32               = Y
 x86-64               = Y
-- 
2.7.4