DPDK patches and discussions
 help / color / mirror / Atom feed
From: Ori Kam <orika@mellanox.com>
To: "wenzhuo.lu@intel.com" <wenzhuo.lu@intel.com>,
	"jingjing.wu@intel.com" <jingjing.wu@intel.com>,
	"bernard.iremonger@intel.com" <bernard.iremonger@intel.com>,
	"arybchenko@solarflare.com" <arybchenko@solarflare.com>,
	"ferruh.yigit@intel.com" <ferruh.yigit@intel.com>,
	"stephen@networkplumber.org" <stephen@networkplumber.org>,
	Adrien Mazarguil <adrien.mazarguil@6wind.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
	"Dekel Peled" <dekelp@mellanox.com>,
	"Thomas Monjalon" <thomas@monjalon.net>,
	"Nélio Laranjeiro" <nelio.laranjeiro@6wind.com>,
	"Yongseok Koh" <yskoh@mellanox.com>,
	"Ori Kam" <orika@mellanox.com>,
	"Shahaf Shuler" <shahafs@mellanox.com>
Subject: [dpdk-dev] [PATCH v2 1/3] app/testpmd: add MPLSoUDP encapsulation
Date: Sun, 7 Oct 2018 14:41:52 +0000	[thread overview]
Message-ID: <1538923293-127516-2-git-send-email-orika@mellanox.com> (raw)
In-Reply-To: <1538923293-127516-1-git-send-email-orika@mellanox.com>

MPLSoUDP is an example for L3 tunnel encapsulation.

Due to the complex encapsulation of MPLSoUDP flow action and based on the
fact testpmd does not allocate memory, this patch adds a new command in
testpmd to initialise a global structure containing the necessary
information to make the outer layer of the packet.  This same global
structure will then be used by the flow command line in testpmd when the
action mplsoudp_encap will be parsed, at this point, the conversion into
such action becomes trivial.

This global structure is only used for the encap action.

Signed-off-by: Ori Kam <orika@mellanox.com>
---
 app/test-pmd/cmdline.c                      | 175 ++++++++++++++++++++++++++++
 app/test-pmd/cmdline_flow.c                 | 122 +++++++++++++++++++
 app/test-pmd/testpmd.h                      |  17 +++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  50 ++++++++
 4 files changed, 364 insertions(+)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 3376a66..492dc5d 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -15274,6 +15274,179 @@ static void cmd_set_nvgre_parsed(void *parsed_result,
 	},
 };
 
+/** Set MPLSoUDP encapsulation details */
+struct cmd_set_mplsoudp_result {
+	cmdline_fixed_string_t set;
+	cmdline_fixed_string_t mplsoudp;
+	cmdline_fixed_string_t pos_token;
+	cmdline_fixed_string_t ip_version;
+	uint32_t vlan_present:1;
+	uint32_t label;
+	uint16_t udp_src;
+	uint16_t udp_dst;
+	cmdline_ipaddr_t ip_src;
+	cmdline_ipaddr_t ip_dst;
+	uint16_t tci;
+	struct ether_addr eth_src;
+	struct ether_addr eth_dst;
+};
+
+cmdline_parse_token_string_t cmd_set_mplsoudp_set =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_mplsoudp_result, set, "set");
+cmdline_parse_token_string_t cmd_set_mplsoudp_mplsoudp =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_mplsoudp_result, mplsoudp, "mplsoudp");
+cmdline_parse_token_string_t cmd_set_mplsoudp_mplsoudp_with_vlan =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_mplsoudp_result, mplsoudp,
+				 "mplsoudp-with-vlan");
+cmdline_parse_token_string_t cmd_set_mplsoudp_ip_version =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_mplsoudp_result, pos_token,
+				 "ip-version");
+cmdline_parse_token_string_t cmd_set_mplsoudp_ip_version_value =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_mplsoudp_result, ip_version,
+				 "ipv4#ipv6");
+cmdline_parse_token_string_t cmd_set_mplsoudp_label =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_mplsoudp_result, pos_token,
+				 "label");
+cmdline_parse_token_num_t cmd_set_mplsoudp_label_value =
+	TOKEN_NUM_INITIALIZER(struct cmd_set_mplsoudp_result, label, UINT32);
+cmdline_parse_token_string_t cmd_set_mplsoudp_udp_src =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_mplsoudp_result, pos_token,
+				 "udp-src");
+cmdline_parse_token_num_t cmd_set_mplsoudp_udp_src_value =
+	TOKEN_NUM_INITIALIZER(struct cmd_set_mplsoudp_result, udp_src, UINT16);
+cmdline_parse_token_string_t cmd_set_mplsoudp_udp_dst =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_mplsoudp_result, pos_token,
+				 "udp-dst");
+cmdline_parse_token_num_t cmd_set_mplsoudp_udp_dst_value =
+	TOKEN_NUM_INITIALIZER(struct cmd_set_mplsoudp_result, udp_dst, UINT16);
+cmdline_parse_token_string_t cmd_set_mplsoudp_ip_src =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_mplsoudp_result, pos_token,
+				 "ip-src");
+cmdline_parse_token_ipaddr_t cmd_set_mplsoudp_ip_src_value =
+	TOKEN_IPADDR_INITIALIZER(struct cmd_set_mplsoudp_result, ip_src);
+cmdline_parse_token_string_t cmd_set_mplsoudp_ip_dst =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_mplsoudp_result, pos_token,
+				 "ip-dst");
+cmdline_parse_token_ipaddr_t cmd_set_mplsoudp_ip_dst_value =
+	TOKEN_IPADDR_INITIALIZER(struct cmd_set_mplsoudp_result, ip_dst);
+cmdline_parse_token_string_t cmd_set_mplsoudp_vlan =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_mplsoudp_result, pos_token,
+				 "vlan-tci");
+cmdline_parse_token_num_t cmd_set_mplsoudp_vlan_value =
+	TOKEN_NUM_INITIALIZER(struct cmd_set_mplsoudp_result, tci, UINT16);
+cmdline_parse_token_string_t cmd_set_mplsoudp_eth_src =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_mplsoudp_result, pos_token,
+				 "eth-src");
+cmdline_parse_token_etheraddr_t cmd_set_mplsoudp_eth_src_value =
+	TOKEN_ETHERADDR_INITIALIZER(struct cmd_set_mplsoudp_result, eth_src);
+cmdline_parse_token_string_t cmd_set_mplsoudp_eth_dst =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_mplsoudp_result, pos_token,
+				 "eth-dst");
+cmdline_parse_token_etheraddr_t cmd_set_mplsoudp_eth_dst_value =
+	TOKEN_ETHERADDR_INITIALIZER(struct cmd_set_mplsoudp_result, eth_dst);
+
+static void cmd_set_mplsoudp_parsed(void *parsed_result,
+	__attribute__((unused)) struct cmdline *cl,
+	__attribute__((unused)) void *data)
+{
+	struct cmd_set_mplsoudp_result *res = parsed_result;
+	union {
+		uint32_t mplsoudp_label;
+		uint8_t label[3];
+	} id = {
+		.mplsoudp_label =
+			rte_cpu_to_be_32(res->label) & RTE_BE32(0x00ffffff),
+	};
+
+	if (strcmp(res->mplsoudp, "mplsoudp") == 0)
+		mplsoudp_encap_conf.select_vlan = 0;
+	else if (strcmp(res->mplsoudp, "mplsoudp-with-vlan") == 0)
+		mplsoudp_encap_conf.select_vlan = 1;
+	if (strcmp(res->ip_version, "ipv4") == 0)
+		mplsoudp_encap_conf.select_ipv4 = 1;
+	else if (strcmp(res->ip_version, "ipv6") == 0)
+		mplsoudp_encap_conf.select_ipv4 = 0;
+	else
+		return;
+	rte_memcpy(mplsoudp_encap_conf.label, &id.label[1], 3);
+	mplsoudp_encap_conf.udp_src = rte_cpu_to_be_16(res->udp_src);
+	mplsoudp_encap_conf.udp_dst = rte_cpu_to_be_16(res->udp_dst);
+	if (mplsoudp_encap_conf.select_ipv4) {
+		IPV4_ADDR_TO_UINT(res->ip_src, mplsoudp_encap_conf.ipv4_src);
+		IPV4_ADDR_TO_UINT(res->ip_dst, mplsoudp_encap_conf.ipv4_dst);
+	} else {
+		IPV6_ADDR_TO_ARRAY(res->ip_src, mplsoudp_encap_conf.ipv6_src);
+		IPV6_ADDR_TO_ARRAY(res->ip_dst, mplsoudp_encap_conf.ipv6_dst);
+	}
+	if (mplsoudp_encap_conf.select_vlan)
+		mplsoudp_encap_conf.vlan_tci = rte_cpu_to_be_16(res->tci);
+	rte_memcpy(mplsoudp_encap_conf.eth_src, res->eth_src.addr_bytes,
+		   ETHER_ADDR_LEN);
+	rte_memcpy(mplsoudp_encap_conf.eth_dst, res->eth_dst.addr_bytes,
+		   ETHER_ADDR_LEN);
+}
+
+cmdline_parse_inst_t cmd_set_mplsoudp = {
+	.f = cmd_set_mplsoudp_parsed,
+	.data = NULL,
+	.help_str = "set mplsoudp ip-version ipv4|ipv6 label <label> udp-src"
+		" <udp-src> udp-dst <udp-dst> ip-src <ip-src> ip-dst <ip-dst>"
+		" eth-src <eth-src> eth-dst <eth-dst>",
+	.tokens = {
+		(void *)&cmd_set_mplsoudp_set,
+		(void *)&cmd_set_mplsoudp_mplsoudp,
+		(void *)&cmd_set_mplsoudp_ip_version,
+		(void *)&cmd_set_mplsoudp_ip_version_value,
+		(void *)&cmd_set_mplsoudp_label,
+		(void *)&cmd_set_mplsoudp_label_value,
+		(void *)&cmd_set_mplsoudp_udp_src,
+		(void *)&cmd_set_mplsoudp_udp_src_value,
+		(void *)&cmd_set_mplsoudp_udp_dst,
+		(void *)&cmd_set_mplsoudp_udp_dst_value,
+		(void *)&cmd_set_mplsoudp_ip_src,
+		(void *)&cmd_set_mplsoudp_ip_src_value,
+		(void *)&cmd_set_mplsoudp_ip_dst,
+		(void *)&cmd_set_mplsoudp_ip_dst_value,
+		(void *)&cmd_set_mplsoudp_eth_src,
+		(void *)&cmd_set_mplsoudp_eth_src_value,
+		(void *)&cmd_set_mplsoudp_eth_dst,
+		(void *)&cmd_set_mplsoudp_eth_dst_value,
+		NULL,
+	},
+};
+
+cmdline_parse_inst_t cmd_set_mplsoudp_with_vlan = {
+	.f = cmd_set_mplsoudp_parsed,
+	.data = NULL,
+	.help_str = "set mplsoudp-with-vlan ip-version ipv4|ipv6 label <label>"
+		" udp-src <udp-src> udp-dst <udp-dst> ip-src <ip-src> ip-dst"
+		" <ip-dst> vlan-tci <vlan-tci> eth-src <eth-src> eth-dst"
+		" <eth-dst>",
+	.tokens = {
+		(void *)&cmd_set_mplsoudp_set,
+		(void *)&cmd_set_mplsoudp_mplsoudp_with_vlan,
+		(void *)&cmd_set_mplsoudp_ip_version,
+		(void *)&cmd_set_mplsoudp_ip_version_value,
+		(void *)&cmd_set_mplsoudp_label,
+		(void *)&cmd_set_mplsoudp_label_value,
+		(void *)&cmd_set_mplsoudp_udp_src,
+		(void *)&cmd_set_mplsoudp_udp_src_value,
+		(void *)&cmd_set_mplsoudp_udp_dst,
+		(void *)&cmd_set_mplsoudp_udp_dst_value,
+		(void *)&cmd_set_mplsoudp_ip_src,
+		(void *)&cmd_set_mplsoudp_ip_src_value,
+		(void *)&cmd_set_mplsoudp_ip_dst,
+		(void *)&cmd_set_mplsoudp_ip_dst_value,
+		(void *)&cmd_set_mplsoudp_vlan,
+		(void *)&cmd_set_mplsoudp_vlan_value,
+		(void *)&cmd_set_mplsoudp_eth_src,
+		(void *)&cmd_set_mplsoudp_eth_src_value,
+		(void *)&cmd_set_mplsoudp_eth_dst,
+		(void *)&cmd_set_mplsoudp_eth_dst_value,
+		NULL,
+	},
+};
+
 /* Strict link priority scheduling mode setting */
 static void
 cmd_strict_link_prio_parsed(
@@ -17903,6 +18076,8 @@ struct cmd_config_per_queue_tx_offload_result {
 	(cmdline_parse_inst_t *)&cmd_set_vxlan_with_vlan,
 	(cmdline_parse_inst_t *)&cmd_set_nvgre,
 	(cmdline_parse_inst_t *)&cmd_set_nvgre_with_vlan,
+	(cmdline_parse_inst_t *)&cmd_set_mplsoudp,
+	(cmdline_parse_inst_t *)&cmd_set_mplsoudp_with_vlan,
 	(cmdline_parse_inst_t *)&cmd_ddp_add,
 	(cmdline_parse_inst_t *)&cmd_ddp_del,
 	(cmdline_parse_inst_t *)&cmd_ddp_get_list,
diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index c9dba79..7e8de1d 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -243,6 +243,7 @@ enum index {
 	ACTION_VXLAN_DECAP,
 	ACTION_NVGRE_ENCAP,
 	ACTION_NVGRE_DECAP,
+	ACTION_MPLSOUDP_ENCAP,
 };
 
 /** Maximum size for pattern in struct rte_flow_item_raw. */
@@ -271,6 +272,12 @@ struct action_tunnel_encap_data {
 	uint8_t buf[ACTION_TUNNEL_ENCAP_MAX_BUFFER_SIZE];
 };
 
+/** Storage for struct rte_flow_action_tunnel_encap including external data. */
+struct action_tunnel_encap_l3_data {
+	struct rte_flow_action_tunnel_encap_l3 conf;
+	uint8_t buf[ACTION_TUNNEL_ENCAP_MAX_BUFFER_SIZE];
+};
+
 /** Maximum number of subsequent tokens and arguments on the stack. */
 #define CTX_STACK_SIZE 16
 
@@ -792,6 +799,7 @@ struct parse_action_priv {
 	ACTION_VXLAN_DECAP,
 	ACTION_NVGRE_ENCAP,
 	ACTION_NVGRE_DECAP,
+	ACTION_MPLSOUDP_ENCAP,
 	ZERO,
 };
 
@@ -928,6 +936,9 @@ static int parse_vc_action_vxlan_encap(struct context *, const struct token *,
 static int parse_vc_action_nvgre_encap(struct context *, const struct token *,
 				       const char *, unsigned int, void *,
 				       unsigned int);
+static int parse_vc_action_mplsoudp_encap(struct context *,
+					  const struct token *, const char *,
+					  unsigned int, void *, unsigned int);
 static int parse_destroy(struct context *, const struct token *,
 			 const char *, unsigned int,
 			 void *, unsigned int);
@@ -2446,6 +2457,15 @@ static int comp_vc_action_rss_queue(struct context *, const struct token *,
 		.next = NEXT(NEXT_ENTRY(ACTION_NEXT)),
 		.call = parse_vc,
 	},
+	[ACTION_MPLSOUDP_ENCAP] = {
+		.name = "mplsoudp_encap",
+		.help = "mplsoudp encapsulation, uses configuration set by"
+			" \"set vxlan\"",
+		.priv = PRIV_ACTION(TUNNEL_ENCAP_L3,
+				    sizeof(struct action_tunnel_encap_l3_data)),
+		.next = NEXT(NEXT_ENTRY(ACTION_NEXT)),
+		.call = parse_vc_action_mplsoudp_encap,
+	},
 };
 
 /** Remove and return last entry from argument stack. */
@@ -3207,6 +3227,108 @@ static int comp_vc_action_rss_queue(struct context *, const struct token *,
 	return ret;
 }
 
+/** Parse MPLSOUDP encap action. */
+static int
+parse_vc_action_mplsoudp_encap(struct context *ctx, const struct token *token,
+			       const char *str, unsigned int len,
+			       void *buf, unsigned int size)
+{
+	struct buffer *out = buf;
+	struct rte_flow_action *action;
+	struct action_tunnel_encap_data *action_encap_data;
+	struct rte_flow_item_eth eth = { .type = 0, };
+	struct rte_flow_item_vlan vlan = {
+		.tci = mplsoudp_encap_conf.vlan_tci,
+		.inner_type = 0,
+	};
+	struct rte_flow_item_ipv4 ipv4 = {
+		.hdr =  {
+			.src_addr = mplsoudp_encap_conf.ipv4_src,
+			.dst_addr = mplsoudp_encap_conf.ipv4_dst,
+			.next_proto_id = IP_PROTO_UDP,
+		},
+	};
+	struct rte_flow_item_ipv6 ipv6 = {
+		.hdr =  {
+			.proto = IP_PROTO_UDP,
+		},
+	};
+	struct rte_flow_item_udp udp = {
+		.hdr = {
+			.src_port = mplsoudp_encap_conf.udp_src,
+			.dst_port = mplsoudp_encap_conf.udp_dst,
+		},
+	};
+	struct rte_flow_item_mpls mpls;
+	uint8_t *header;
+	int ret;
+
+	ret = parse_vc(ctx, token, str, len, buf, size);
+	if (ret < 0)
+		return ret;
+	/* Nothing else to do if there is no buffer. */
+	if (!out)
+		return ret;
+	if (!out->args.vc.actions_n)
+		return -1;
+	action = &out->args.vc.actions[out->args.vc.actions_n - 1];
+	/* Point to selected object. */
+	ctx->object = out->args.vc.data;
+	ctx->objmask = NULL;
+	/* Copy the headers to the buffer. */
+	action_encap_data = ctx->object;
+	*action_encap_data = (struct action_tunnel_encap_data) {
+		.conf = (struct rte_flow_action_tunnel_encap){
+			.buf = action_encap_data->buf,
+		},
+		.buf = {},
+	};
+	header = action_encap_data->buf;
+	if (mplsoudp_encap_conf.select_vlan)
+		eth.type = rte_cpu_to_be_16(ETHER_TYPE_VLAN);
+	else if (mplsoudp_encap_conf.select_ipv4)
+		eth.type = rte_cpu_to_be_16(ETHER_TYPE_IPv4);
+	else
+		eth.type = rte_cpu_to_be_16(ETHER_TYPE_IPv6);
+	memcpy(eth.dst.addr_bytes,
+	       mplsoudp_encap_conf.eth_dst, ETHER_ADDR_LEN);
+	memcpy(eth.src.addr_bytes,
+	       mplsoudp_encap_conf.eth_src, ETHER_ADDR_LEN);
+	memcpy(header, &eth, sizeof(eth));
+	header += sizeof(eth);
+	if (mplsoudp_encap_conf.select_vlan) {
+		if (mplsoudp_encap_conf.select_ipv4)
+			vlan.inner_type = rte_cpu_to_be_16(ETHER_TYPE_IPv4);
+		else
+			vlan.inner_type = rte_cpu_to_be_16(ETHER_TYPE_IPv6);
+		memcpy(header, &vlan, sizeof(vlan));
+		header += sizeof(vlan);
+	}
+	if (mplsoudp_encap_conf.select_ipv4) {
+		memcpy(header, &ipv4, sizeof(ipv4));
+		header += sizeof(ipv4);
+	} else {
+		memcpy(&ipv6.hdr.src_addr,
+		       &mplsoudp_encap_conf.ipv6_src,
+		       sizeof(mplsoudp_encap_conf.ipv6_src));
+		memcpy(&ipv6.hdr.dst_addr,
+		       &mplsoudp_encap_conf.ipv6_dst,
+		       sizeof(mplsoudp_encap_conf.ipv6_dst));
+		memcpy(header, &ipv6, sizeof(ipv6));
+		header += sizeof(ipv6);
+	}
+	memcpy(header, &udp, sizeof(udp));
+	header += sizeof(udp);
+	memcpy(mpls.label_tc_s, mplsoudp_encap_conf.label,
+	       RTE_DIM(mplsoudp_encap_conf.label));
+	memcpy(header, &mpls, sizeof(mpls));
+	header += sizeof(mpls);
+	action_encap_data->conf.size = header -
+		action_encap_data->buf;
+	action->conf = &action_encap_data->conf;
+	return ret;
+}
+
 /** Parse tokens for destroy command. */
 static int
 parse_destroy(struct context *ctx, const struct token *token,
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 11afb48..57fc6d1 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -484,6 +484,23 @@ struct nvgre_encap_conf {
 };
 struct nvgre_encap_conf nvgre_encap_conf;
 
+/* MPLSoUDP encap parameters. */
+struct mplsoudp_encap_conf {
+	uint32_t select_ipv4:1;
+	uint32_t select_vlan:1;
+	uint8_t label[3];
+	rte_be16_t udp_src;
+	rte_be16_t udp_dst;
+	rte_be32_t ipv4_src;
+	rte_be32_t ipv4_dst;
+	uint8_t ipv6_src[16];
+	uint8_t ipv6_dst[16];
+	rte_be16_t vlan_tci;
+	uint8_t eth_src[ETHER_ADDR_LEN];
+	uint8_t eth_dst[ETHER_ADDR_LEN];
+};
+struct mplsoudp_encap_conf mplsoudp_encap_conf;
+
 static inline unsigned int
 lcore_num(void)
 {
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 3a73000..e07a6f8 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1570,6 +1570,23 @@ flow rule using the action nvgre_encap will use the last configuration set.
 To have a different encapsulation header, one of those commands must be called
 before the flow rule creation.
 
+Config MPLSoUDP Encap outer layers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Configure the outer layer to encapsulate a packet inside a MPLSoUDP tunnel::
+
+ set mplsoudp ip-version (ipv4|ipv6) label (label) udp-src (udp-src) \
+        udp-dst (udp-dst) ip-src (ip-src) ip-dst (ip-dst) \
+        eth-src (eth-src) eth-dst (eth-dst)
+ set mplsoudp-with-vlan ip-version (ipv4|ipv6) label (label) udp-src (udp-src)
+        udp-dst (udp-dst) ip-src (ip-src) ip-dst (ip-dst) vlan-tci (vlan-tci) \
+        eth-src (eth-src) eth-dst (eth-dst)
+
+Those command will set an internal configuration inside testpmd, any following
+flow rule using the action mplsoudp_encap will use the last configuration set.
+To have a different encapsulation header, one of those commands must be called
+before the flow rule creation.
+
 Port Functions
 --------------
 
@@ -3704,6 +3721,9 @@ This section lists supported actions and their attributes, if any.
 - ``nvgre_decap``: Performs a decapsulation action by stripping all headers of
   the NVGRE tunnel network overlay from the matched flow.
 
+- ``mplsoudp_encap``: Performs a MPLSoUDP encapsulation, outer layer
+  configuration is done through `Config MPLSoUDP Encap outer layers`_.
+
 Destroying flow rules
 ~~~~~~~~~~~~~~~~~~~~~
 
@@ -4032,6 +4052,36 @@ IPv6 NVGRE outer header::
  testpmd> flow create 0 ingress pattern end actions nvgre_encap /
         queue index 0 / end
 
+Sample MPLSoUDP encapsulation rule
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+MPLSoUDP encapsulation outer layer has default value pre-configured in testpmd
+source code, those can be changed by using the following commands
+
+IPv4 MPLSoUDP outer header::
+
+ testpmd> set mplsoudp ip-version ipv4 label 4 udp-src 5 udp-dst 10
+        ip-src 127.0.0.1 ip-dst 128.0.0.1 eth-src 11:11:11:11:11:11
+        eth-dst 22:22:22:22:22:22
+ testpmd> flow create 0 egress pattern end actions mplsoudp_encap / end
+
+ testpmd> set mplsoudp-with-vlan ip-version ipv4 label 4 udp-src 5 udp-dst 10
+        ip-src 127.0.0.1 ip-dst 128.0.0.1 vlan-tci 34 eth-src 11:11:11:11:11:11
+        eth-dst 22:22:22:22:22:22
+ testpmd> flow create 0 egress pattern end actions mplsoudp_encap / end
+
+IPv6 MPLSoUDP outer header::
+
+ testpmd> set mplsoudp ip-version ipv6 mask 4 udp-src 5 udp-dst 10
+        ip-src ::1 ip-dst ::2222 eth-src 11:11:11:11:11:11
+        eth-dst 22:22:22:22:22:22
+ testpmd> flow create 0 egress pattern end actions mplsoudp_encap / end
+
+ testpmd> set mplsoudp-with-vlan ip-version ipv6 mask 4 udp-src 5 udp-dst 10
+        ip-src ::1 ip-dst ::2222 vlan-tci 34 eth-src 11:11:11:11:11:11
+        eth-dst 22:22:22:22:22:22
+ testpmd> flow create 0 egress pattern end actions mplsoudp_encap / end
+
 BPF Functions
 --------------
 
-- 
1.8.3.1

  reply	other threads:[~2018-10-07 14:41 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-29 20:07 [dpdk-dev] [PATCH 0/3] app/testpmd: add l3 encap/decap cmd Ori Kam
2018-09-29 20:07 ` [dpdk-dev] [PATCH 1/3] app/testpmd: add MPLSoUDP encapsulation Ori Kam
2018-09-29 20:07 ` [dpdk-dev] [PATCH 2/3] app/testpmd: add MPLSoGRE encapsulation Ori Kam
2018-09-29 20:07 ` [dpdk-dev] [PATCH 3/3] app/testpmd: add decap l3 command Ori Kam
2018-10-05 13:35 ` [dpdk-dev] [PATCH 0/3] app/testpmd: add l3 encap/decap cmd Ferruh Yigit
2018-10-05 14:00   ` Ori Kam
2018-10-07 14:41 ` [dpdk-dev] [PATCH v2 " Ori Kam
2018-10-07 14:41   ` Ori Kam [this message]
2018-10-07 14:41   ` [dpdk-dev] [PATCH v2 2/3] app/testpmd: add MPLSoGRE encapsulation Ori Kam
2018-10-07 14:41   ` [dpdk-dev] [PATCH v2 3/3] app/testpmd: add decap l3 command Ori Kam
2018-10-09 16:48   ` [dpdk-dev] [PATCH v2 0/3] app/testpmd: add l3 encap/decap cmd Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1538923293-127516-2-git-send-email-orika@mellanox.com \
    --to=orika@mellanox.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=arybchenko@solarflare.com \
    --cc=bernard.iremonger@intel.com \
    --cc=dekelp@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jingjing.wu@intel.com \
    --cc=nelio.laranjeiro@6wind.com \
    --cc=shahafs@mellanox.com \
    --cc=stephen@networkplumber.org \
    --cc=thomas@monjalon.net \
    --cc=wenzhuo.lu@intel.com \
    --cc=yskoh@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).