[dpdk-dev] [RFC PATCH 1/3] rte_ethdev: Add API function to read dev clock

[Tom Barbette <barbette@kth.se>]

Add rte_eth_read_clock to read the current clock of a devide.

The main use is to get the current clock as written by the driver in
the timestamp field of the pkt mbuf when timestamp offloading is
enabled.

This function was missing to allow users to convert that RX timestamp field
to real time without the complexity of the rte_timesync* facility. One can
derivate the clock frequency by calling twice read_clock and then keep a
common time base.

Signed-off-by: Tom Barbette <barbette@kth.se>
---
 doc/guides/nics/features.rst             |  1 +
 lib/librte_ethdev/rte_ethdev.c           | 13 +++++++++++++
 lib/librte_ethdev/rte_ethdev.h           | 23 +++++++++++++++++++++++
 lib/librte_ethdev/rte_ethdev_core.h      |  6 ++++++
 lib/librte_ethdev/rte_ethdev_version.map |  1 +
 lib/librte_mbuf/rte_mbuf.h               |  2 ++
 6 files changed, 46 insertions(+)

diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
index d3f904839..45484a30f 100644
--- a/doc/guides/nics/features.rst
+++ b/doc/guides/nics/features.rst
@@ -602,6 +602,7 @@ Supports Timestamp.
 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_TIMESTAMP``.
 * **[provides] mbuf**: ``mbuf.timestamp``.
 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa: DEV_RX_OFFLOAD_TIMESTAMP``.
+* **[implements] eth_dev_ops**: ``read_clock``.
 
 .. _nic_features_macsec_offload:
 
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 5f858174b..48e8218b2 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -4124,6 +4124,19 @@ rte_eth_timesync_write_time(uint16_t port_id, const struct timespec *timestamp)
 								timestamp));
 }
 
+int
+rte_eth_read_clock(uint16_t port_id, uint64_t *timestamp)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->read_clock, -ENOTSUP);
+	return eth_err(port_id, (*dev->dev_ops->read_clock)(dev,
+								timestamp));
+}
+
 int
 rte_eth_dev_get_reg_info(uint16_t port_id, struct rte_dev_reg_info *info)
 {
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index 1960f3a2d..6e3a48308 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -3642,6 +3642,29 @@ int rte_eth_timesync_read_time(uint16_t port_id, struct timespec *time);
  */
 int rte_eth_timesync_write_time(uint16_t port_id, const struct timespec *time);
 
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Read the current clock counter of an Ethernet device
+ *
+ * This returns the current raw clock value of an Ethernet device.
+ * The value returned here is from the same clock than the one
+ * filling timestamp field of RX packets. Therefore it can be used
+ * to compute a precise conversion of the device clock to the real time.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param time
+ *   Pointer to the uint64_t that holds the raw clock value.
+ *
+ * @return
+ *   - 0: Success.
+ *   - -ENODEV: The port ID is invalid.
+ *   - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int __rte_experimental rte_eth_read_clock(uint16_t port_id, uint64_t *time);
+
 /**
  * Config l2 tunnel ether type of an Ethernet device for filtering specific
  * tunnel packets by ether type.
diff --git a/lib/librte_ethdev/rte_ethdev_core.h b/lib/librte_ethdev/rte_ethdev_core.h
index 8f03f83f6..86806b3eb 100644
--- a/lib/librte_ethdev/rte_ethdev_core.h
+++ b/lib/librte_ethdev/rte_ethdev_core.h
@@ -322,6 +322,10 @@ typedef int (*eth_timesync_write_time)(struct rte_eth_dev *dev,
 				       const struct timespec *timestamp);
 /**< @internal Function used to get time from the device clock */
 
+typedef int (*eth_read_clock)(struct rte_eth_dev *dev,
+				      uint64_t *timestamp);
+/**< @internal Function used to get the current value of the device clock. */
+
 typedef int (*eth_get_reg_t)(struct rte_eth_dev *dev,
 				struct rte_dev_reg_info *info);
 /**< @internal Retrieve registers  */
@@ -496,6 +500,8 @@ struct eth_dev_ops {
 	eth_timesync_read_time     timesync_read_time; /** Get the device clock time. */
 	eth_timesync_write_time    timesync_write_time; /** Set the device clock time. */
 
+	eth_read_clock             read_clock;
+
 	eth_xstats_get_by_id_t     xstats_get_by_id;
 	/**< Get extended device statistic values by ID. */
 	eth_xstats_get_names_by_id_t xstats_get_names_by_id;
diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
index 92ac3de25..12d6c3c1d 100644
--- a/lib/librte_ethdev/rte_ethdev_version.map
+++ b/lib/librte_ethdev/rte_ethdev_version.map
@@ -249,6 +249,7 @@ EXPERIMENTAL {
 	rte_eth_switch_domain_free;
 	rte_flow_conv;
 	rte_flow_expand_rss;
+	rte_eth_read_clock;
 	rte_mtr_capabilities_get;
 	rte_mtr_create;
 	rte_mtr_destroy;
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index 3dbc6695e..4ceefa913 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -605,6 +605,8 @@ struct rte_mbuf {
 
 	/** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference
 	 * are not normalized but are always the same for a given port.
+	 * Some devices allow to query rte_eth_read_clock that will return the
+	 * current device timestamp.
 	 */
 	uint64_t timestamp;
 
-- 
2.17.1