From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mellanox.co.il (mail-il-dmz.mellanox.com [193.47.165.129]) by dpdk.org (Postfix) with ESMTP id 417E51B108 for ; Thu, 27 Dec 2018 16:35:01 +0100 (CET) Received: from Internal Mail-Server by MTLPINE1 (envelope-from viacheslavo@mellanox.com) with ESMTPS (AES256-SHA encrypted); 27 Dec 2018 17:34:56 +0200 Received: from pegasus12.mtr.labs.mlnx. (pegasus12.mtr.labs.mlnx [10.210.17.40]) by labmailer.mlnx (8.13.8/8.13.8) with ESMTP id wBRFYuV3005767; Thu, 27 Dec 2018 17:34:56 +0200 From: Viacheslav Ovsiienko To: shahafs@mellanox.com Cc: dev@dpdk.org, stable@dpdk.org Date: Thu, 27 Dec 2018 15:34:44 +0000 Message-Id: <1545924885-6215-5-git-send-email-viacheslavo@mellanox.com> X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1545924885-6215-1-git-send-email-viacheslavo@mellanox.com> References: <1545924885-6215-1-git-send-email-viacheslavo@mellanox.com> Subject: [dpdk-dev] [PATCH 4/5] net/mlx5: add ethernet type validation on E-Switch X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2018 15:35:02 -0000 This patch updates the validation routine for the E-Switch Flows. The ethernet type field can be specified within inner and outer tunnel ethernet items, by vlan item or implicitly deduced from IP address items. The validation routine checks all these items and their combinations for mutual compatibility issues and possible conflicts. Cc: stable@dpdk.org Signed-off-by: Viacheslav Ovsiienko --- drivers/net/mlx5/mlx5_flow_tcf.c | 114 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 113 insertions(+), 1 deletion(-) diff --git a/drivers/net/mlx5/mlx5_flow_tcf.c b/drivers/net/mlx5/mlx5_flow_tcf.c index 688422d..e70c377 100644 --- a/drivers/net/mlx5/mlx5_flow_tcf.c +++ b/drivers/net/mlx5/mlx5_flow_tcf.c @@ -1695,9 +1695,12 @@ struct pedit_parser { const struct rte_flow_action_set_ipv6 *set_ipv6; } conf; const struct rte_flow_item *outer_udp = NULL; + rte_be16_t inner_etype = RTE_BE16(ETH_P_ALL); + rte_be16_t outer_etype = RTE_BE16(ETH_P_ALL); + rte_be16_t vlan_etype = RTE_BE16(ETH_P_ALL); uint64_t item_flags = 0; uint64_t action_flags = 0; - uint8_t next_protocol = -1; + uint8_t next_protocol = 0xff; unsigned int tcm_ifindex = 0; uint8_t pedit_validated = 0; struct flow_tcf_ptoi ptoi[PTOI_TABLE_SZ_MAX(dev)]; @@ -1963,6 +1966,32 @@ struct pedit_parser { mask.eth, "no support for partial mask on" " \"type\" field"); + assert(items->spec); + spec.eth = items->spec; + if (mask.eth->type && + (item_flags & MLX5_FLOW_LAYER_TUNNEL) && + inner_etype != RTE_BE16(ETH_P_ALL) && + inner_etype != spec.eth->type) + return rte_flow_error_set + (error, EINVAL, + RTE_FLOW_ERROR_TYPE_ITEM, + items, + "inner eth_type conflict"); + if (mask.eth->type && + !(item_flags & MLX5_FLOW_LAYER_TUNNEL) && + outer_etype != RTE_BE16(ETH_P_ALL) && + outer_etype != spec.eth->type) + return rte_flow_error_set + (error, EINVAL, + RTE_FLOW_ERROR_TYPE_ITEM, + items, + "outer eth_type conflict"); + if (mask.eth->type) { + if (item_flags & MLX5_FLOW_LAYER_TUNNEL) + inner_etype = spec.eth->type; + else + outer_etype = spec.eth->type; + } break; case RTE_FLOW_ITEM_TYPE_VLAN: if (item_flags & MLX5_FLOW_LAYER_TUNNEL) @@ -1999,6 +2028,27 @@ struct pedit_parser { "no support for partial masks on" " \"tci\" (PCP and VID parts) and" " \"inner_type\" fields"); + if (outer_etype != RTE_BE16(ETH_P_ALL) && + outer_etype != RTE_BE16(ETH_P_8021Q)) + return rte_flow_error_set + (error, EINVAL, + RTE_FLOW_ERROR_TYPE_ITEM, + items, + "outer eth_type conflict," + " must be 802.1Q"); + outer_etype = RTE_BE16(ETH_P_8021Q); + assert(items->spec); + spec.vlan = items->spec; + if (mask.vlan->inner_type && + vlan_etype != RTE_BE16(ETH_P_ALL) && + vlan_etype != spec.vlan->inner_type) + return rte_flow_error_set + (error, EINVAL, + RTE_FLOW_ERROR_TYPE_ITEM, + items, + "vlan eth_type conflict"); + if (mask.vlan->inner_type) + vlan_etype = spec.vlan->inner_type; break; case RTE_FLOW_ITEM_TYPE_IPV4: ret = mlx5_flow_validate_item_ipv4(items, item_flags, @@ -2028,6 +2078,37 @@ struct pedit_parser { next_protocol = ((const struct rte_flow_item_ipv4 *) (items->spec))->hdr.next_proto_id; + if (item_flags & MLX5_FLOW_LAYER_TUNNEL) { + if (inner_etype != RTE_BE16(ETH_P_ALL) && + inner_etype != RTE_BE16(ETH_P_IP)) + return rte_flow_error_set + (error, EINVAL, + RTE_FLOW_ERROR_TYPE_ITEM, + items, + "inner eth_type conflict," + " IPv4 is required"); + inner_etype = RTE_BE16(ETH_P_IP); + } else if (item_flags & MLX5_FLOW_LAYER_OUTER_VLAN) { + if (vlan_etype != RTE_BE16(ETH_P_ALL) && + vlan_etype != RTE_BE16(ETH_P_IP)) + return rte_flow_error_set + (error, EINVAL, + RTE_FLOW_ERROR_TYPE_ITEM, + items, + "vlan eth_type conflict," + " IPv4 is required"); + vlan_etype = RTE_BE16(ETH_P_IP); + } else { + if (outer_etype != RTE_BE16(ETH_P_ALL) && + outer_etype != RTE_BE16(ETH_P_IP)) + return rte_flow_error_set + (error, EINVAL, + RTE_FLOW_ERROR_TYPE_ITEM, + items, + "eth_type conflict," + " IPv4 is required"); + outer_etype = RTE_BE16(ETH_P_IP); + } break; case RTE_FLOW_ITEM_TYPE_IPV6: ret = mlx5_flow_validate_item_ipv6(items, item_flags, @@ -2057,6 +2138,37 @@ struct pedit_parser { next_protocol = ((const struct rte_flow_item_ipv6 *) (items->spec))->hdr.proto; + if (item_flags & MLX5_FLOW_LAYER_TUNNEL) { + if (inner_etype != RTE_BE16(ETH_P_ALL) && + inner_etype != RTE_BE16(ETH_P_IPV6)) + return rte_flow_error_set + (error, EINVAL, + RTE_FLOW_ERROR_TYPE_ITEM, + items, + "inner eth_type conflict," + " IPv6 is required"); + inner_etype = RTE_BE16(ETH_P_IPV6); + } else if (item_flags & MLX5_FLOW_LAYER_OUTER_VLAN) { + if (vlan_etype != RTE_BE16(ETH_P_ALL) && + vlan_etype != RTE_BE16(ETH_P_IPV6)) + return rte_flow_error_set + (error, EINVAL, + RTE_FLOW_ERROR_TYPE_ITEM, + items, + "vlan eth_type conflict," + " IPv6 is required"); + vlan_etype = RTE_BE16(ETH_P_IPV6); + } else { + if (outer_etype != RTE_BE16(ETH_P_ALL) && + outer_etype != RTE_BE16(ETH_P_IPV6)) + return rte_flow_error_set + (error, EINVAL, + RTE_FLOW_ERROR_TYPE_ITEM, + items, + "eth_type conflict," + " IPv6 is required"); + outer_etype = RTE_BE16(ETH_P_IPV6); + } break; case RTE_FLOW_ITEM_TYPE_UDP: ret = mlx5_flow_validate_item_udp(items, item_flags, -- 1.8.3.1