[dpdk-dev] [PATCH v2 0/7] enhancements for i40e

[dpdk-dev] [PATCH v2 0/7] enhancements for i40e

[Helin Zhang]

These patches are enhancements for i40e or relevant. In detail, they include:
 * fix for getting correct RSS hash result
 * remove an interface which is not used
 * fix for copying wrong size of link info
 * fix for updating the hash lookup table of PF RSS
 * double vlan should be specifically disabled by default
 * ignore the failure of updating default macvlan filter.
 * rework for displaying different size of RX descriptors in testpmd.

Helin Zhang (7):
  i40e: fix for getting correct RSS hash result
  i40evf: remove an interface which is not used
  i40evf: fix for copying wrong size of link info
  i40e: fix for updating the hash lookup table of PF RSS
  i40e: double vlan should be specifically disabled by default
  i40e: ignore the failure of updating default macvlan filter
  app/testpmd: rework for displaying different size of RX descriptors

 app/test-pmd/config.c                | 73 ++++++++++++++++++++++++------------
 lib/librte_pmd_i40e/i40e_ethdev.c    | 35 ++++++++++-------
 lib/librte_pmd_i40e/i40e_ethdev_vf.c | 16 +-------
 lib/librte_pmd_i40e/i40e_rxtx.c      |  4 +-
 4 files changed, 73 insertions(+), 55 deletions(-)

-- 
1.8.1.4

[dpdk-dev] [PATCH v2 1/7] i40e: fix for getting correct RSS hash result

[Helin Zhang]

It wrongly gets the RSS hash result from the RX descriptor which
has been modified for receiving new packet. The fix is to get the
RSS hash result from the buffer which saves the RX descriptor.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
---
 lib/librte_pmd_i40e/i40e_rxtx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/librte_pmd_i40e/i40e_rxtx.c b/lib/librte_pmd_i40e/i40e_rxtx.c
index 9fccbee..3a6a2d8 100644
--- a/lib/librte_pmd_i40e/i40e_rxtx.c
+++ b/lib/librte_pmd_i40e/i40e_rxtx.c
@@ -863,7 +863,7 @@ i40e_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
 		rxm->ol_flags = pkt_flags;
 		if (pkt_flags & PKT_RX_RSS_HASH)
 			rxm->pkt.hash.rss =
-				rte_le_to_cpu_32(rxdp->wb.qword0.hi_dword.rss);
+				rte_le_to_cpu_32(rxd.wb.qword0.hi_dword.rss);
 
 		rx_pkts[nb_rx++] = rxm;
 	}
@@ -1016,7 +1016,7 @@ i40e_recv_scattered_pkts(void *rx_queue,
 		first_seg->ol_flags = pkt_flags;
 		if (pkt_flags & PKT_RX_RSS_HASH)
 			rxm->pkt.hash.rss =
-				rte_le_to_cpu_32(rxdp->wb.qword0.hi_dword.rss);
+				rte_le_to_cpu_32(rxd.wb.qword0.hi_dword.rss);
 
 		/* Prefetch data of first segment, if configured to do so. */
 		rte_prefetch0(first_seg->pkt.data);
-- 
1.8.1.4

[dpdk-dev] [PATCH v2 2/7] i40evf: remove an interface which is not used

[Helin Zhang]

i40evf_dev_atomic_read_link_status() was defined but not used.
To avoid possible warnings by some compilers, it needs to
delete the whole function.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
---
 lib/librte_pmd_i40e/i40e_ethdev_vf.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/lib/librte_pmd_i40e/i40e_ethdev_vf.c b/lib/librte_pmd_i40e/i40e_ethdev_vf.c
index 9e86285..4800902 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev_vf.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev_vf.c
@@ -883,20 +883,6 @@ static struct rte_pci_id pci_id_i40evf_map[] = {
 };
 
 static inline int
-i40evf_dev_atomic_read_link_status(struct rte_eth_dev *dev,
-				   struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = link;
-	struct rte_eth_link *src = &(dev->data->dev_link);
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-					*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
-static inline int
 i40evf_dev_atomic_write_link_status(struct rte_eth_dev *dev,
 				    struct rte_eth_link *link)
 {
-- 
1.8.1.4

[dpdk-dev] [PATCH v2 3/7] i40evf: fix for copying wrong size of link info

[Helin Zhang]

Fix a bug of copying wrong size of link information in the
function of i40evf_get_link_status().

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
---
 lib/librte_pmd_i40e/i40e_ethdev_vf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/librte_pmd_i40e/i40e_ethdev_vf.c b/lib/librte_pmd_i40e/i40e_ethdev_vf.c
index 4800902..081589c 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev_vf.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev_vf.c
@@ -871,7 +871,7 @@ i40evf_get_link_status(struct rte_eth_dev *dev, struct rte_eth_link *link)
 	}
 
 	new_link = (struct rte_eth_link *)args.out_buffer;
-	(void)rte_memcpy(link, new_link, sizeof(link));
+	(void)rte_memcpy(link, new_link, sizeof(*link));
 
 	return 0;
 }
-- 
1.8.1.4

[dpdk-dev] [PATCH v2 4/7] i40e: fix for updating the hash lookup table of PF RSS

[Helin Zhang]

The bit shifting were written wrongly in '0x1 < j',
the correct one should be '0x1 << j'.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
---
 lib/librte_pmd_i40e/i40e_ethdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/librte_pmd_i40e/i40e_ethdev.c b/lib/librte_pmd_i40e/i40e_ethdev.c
index 1b4e822..0d7be44 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev.c
@@ -1452,7 +1452,7 @@ i40e_dev_rss_reta_update(struct rte_eth_dev *dev,
 			l = I40E_READ_REG(hw, I40E_PFQF_HLUT(i >> 2));
 
 		for (j = 0, lut = 0; j < 4; j++) {
-			if (mask & (0x1 < j))
+			if (mask & (0x1 << j))
 				lut |= reta_conf->reta[i + j] << (8 * j);
 			else
 				lut |= l & (0xFF << (8 * j));
-- 
1.8.1.4

[dpdk-dev] [PATCH v2 5/7] i40e: double vlan should be specifically disabled by default

[Helin Zhang]

Double vlan should be specifically disabled by default during
port initialization which is expected.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
---
 lib/librte_pmd_i40e/i40e_ethdev.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/lib/librte_pmd_i40e/i40e_ethdev.c b/lib/librte_pmd_i40e/i40e_ethdev.c
index 0d7be44..204d2cb 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev.c
@@ -482,6 +482,10 @@ eth_i40e_dev_init(__rte_unused struct eth_driver *eth_drv,
 	}
 
 	vsi = pf->main_vsi;
+
+	/* Disable double vlan by default */
+	i40e_vsi_config_double_vlan(vsi, FALSE);
+
 	if (!vsi->max_macaddrs)
 		len = ETHER_ADDR_LEN;
 	else
-- 
1.8.1.4

[dpdk-dev] [PATCH v2 6/7] i40e: ignore the failure of updating default macvlan filter

[Helin Zhang]

For NVM4.2.2 or after, the firmware has the correct configurations
and load the macvlan filter as expected. It is not needed to
Update the default macvlan filter which cannot be removed at
all during initialization.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
---
 lib/librte_pmd_i40e/i40e_ethdev.c | 29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)

diff --git a/lib/librte_pmd_i40e/i40e_ethdev.c b/lib/librte_pmd_i40e/i40e_ethdev.c
index 204d2cb..3311d73 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev.c
@@ -2306,11 +2306,10 @@ i40e_update_default_filter_setting(struct i40e_vsi *vsi)
 	ret = i40e_aq_remove_macvlan(hw, vsi->seid, &def_filter, 1, NULL);
 	if (ret != I40E_SUCCESS) {
 		struct i40e_mac_filter *f;
-		PMD_DRV_LOG(WARNING, "Failed to remove default [mac,vlan] config\n");
 
-		/* Even failed to update default setting, still needs to add the permanent
-		 *  mac into mac list.
-		 */
+		PMD_DRV_LOG(WARNING, "Cannot remove the default "
+						"macvlan filter\n");
+		/* It needs to add the permanent mac into mac list */
 		f = rte_zmalloc("macv_filter", sizeof(*f), 0);
 		if (f == NULL) {
 			PMD_DRV_LOG(ERR, "failed to allocate memory\n");
@@ -2320,6 +2319,7 @@ i40e_update_default_filter_setting(struct i40e_vsi *vsi)
 				ETH_ADDR_LEN);
 		TAILQ_INSERT_TAIL(&vsi->mac_list, f, next);
 		vsi->mac_num++;
+
 		return ret;
 	}
 
@@ -2516,14 +2516,19 @@ i40e_vsi_setup(struct i40e_pf *pf,
 
 		(void)rte_memcpy(pf->dev_addr.addr_bytes, hw->mac.perm_addr,
 				ETH_ADDR_LEN);
-		ret = i40e_update_default_filter_setting(vsi);
-		if (ret != I40E_SUCCESS) {
-			PMD_DRV_LOG(ERR, "Failed to remove default "
-						"filter setting\n");
-			goto fail_msix_alloc;
-		}
-	}
-	else if (type == I40E_VSI_SRIOV) {
+
+		/**
+		 * Updating default filter settings are necessary to prevent
+		 * reception of tagged packets.
+		 * Some old firmware configurations load a default macvlan
+		 * filter which accepts both tagged and untagged packets.
+		 * The updating is to use a normal filter instead if needed.
+		 * For NVM 4.2.2 or after, the updating is not needed anymore.
+		 * The firmware with correct configurations load the default
+		 * macvlan filter which is expected and cannot be removed.
+		 */
+		i40e_update_default_filter_setting(vsi);
+	} else if (type == I40E_VSI_SRIOV) {
 		memset(&ctxt, 0, sizeof(ctxt));
 		/**
 		 * For other VSI, the uplink_seid equals to uplink VSI's
-- 
1.8.1.4

[dpdk-dev] [PATCH v2 7/7] app/testpmd: rework for displaying different size of RX descriptors

[Helin Zhang]

i40e supports 16 and 32 bytes RX descriptors which can be configured.
It needs to check the driver type and the configuration to determine
if 16 or 32 bytes RX descriptors is being used, for reading and
displaying the different sizes of RX descriptors.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
---
 app/test-pmd/config.c | 73 +++++++++++++++++++++++++++++++++------------------
 1 file changed, 48 insertions(+), 25 deletions(-)

diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 0023ab2..b08b006 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -581,53 +581,76 @@ union igb_ring_dword {
 	} words;
 };
 
-#ifndef RTE_LIBRTE_I40E_16BYTE_RX_DESC
-struct igb_ring_desc_32B {
+struct igb_ring_desc_32_bytes {
 	union igb_ring_dword lo_dword;
 	union igb_ring_dword hi_dword;
 	union igb_ring_dword resv1;
 	union igb_ring_dword resv2;
 };
-#endif
 
-struct igb_ring_desc {
+struct igb_ring_desc_16_bytes {
 	union igb_ring_dword lo_dword;
 	union igb_ring_dword hi_dword;
 };
 
 static void
-ring_rx_descriptor_display(const struct rte_memzone *ring_mz, uint16_t desc_id)
+ring_rxd_display_dword(union igb_ring_dword dword)
 {
-#ifdef RTE_LIBRTE_I40E_16BYTE_RX_DESC
-	struct igb_ring_desc *ring;
-	struct igb_ring_desc rd;
+	printf("    0x%08X - 0x%08X\n", (unsigned)dword.words.lo,
+					(unsigned)dword.words.hi);
+}
 
-	ring = (struct igb_ring_desc *) ring_mz->addr;
+static void
+ring_rx_descriptor_display(const struct rte_memzone *ring_mz,
+#ifndef RTE_LIBRTE_I40E_16BYTE_RX_DESC
+			   uint8_t port_id,
 #else
-	struct igb_ring_desc_32B *ring;
-	struct igb_ring_desc_32B rd;
+			   __rte_unused uint8_t port_id,
+#endif
+			   uint16_t desc_id)
+{
+	struct igb_ring_desc_16_bytes *ring =
+		(struct igb_ring_desc_16_bytes *)ring_mz->addr;
+#ifndef RTE_LIBRTE_I40E_16BYTE_RX_DESC
+	struct rte_eth_dev_info dev_info;
+
+	memset(&dev_info, 0, sizeof(dev_info));
+	rte_eth_dev_info_get(port_id, &dev_info);
+	if (strstr(dev_info.driver_name, "i40e") != NULL) {
+		/* 32 bytes RX descriptor, i40e only */
+		struct igb_ring_desc_32_bytes *ring =
+			(struct igb_ring_desc_32_bytes *)ring_mz->addr;
 
-	ring = (struct igb_ring_desc_32B *) ring_mz->addr;
+		ring_rxd_display_dword(rte_le_to_cpu_64(\
+				ring[desc_id].lo_dword));
+		ring_rxd_display_dword(rte_le_to_cpu_64(\
+				ring[desc_id].hi_dword));
+		ring_rxd_display_dword(rte_le_to_cpu_64(\
+				ring[desc_id].resv1));
+		ring_rxd_display_dword(rte_le_to_cpu_64(\
+				ring[desc_id].resv2));
+		return;
+	}
 #endif
-	rd.lo_dword = rte_le_to_cpu_64(ring[desc_id].lo_dword);
-	rd.hi_dword = rte_le_to_cpu_64(ring[desc_id].hi_dword);
-	printf("    0x%08X - 0x%08X / 0x%08X - 0x%08X\n",
-		(unsigned)rd.lo_dword.words.lo, (unsigned)rd.lo_dword.words.hi,
-		(unsigned)rd.hi_dword.words.lo, (unsigned)rd.hi_dword.words.hi);
+	/* 16 bytes RX descriptor */
+	ring_rxd_display_dword(rte_le_to_cpu_64(\
+			ring[desc_id].lo_dword));
+	ring_rxd_display_dword(rte_le_to_cpu_64(\
+			ring[desc_id].hi_dword));
 }
 
 static void
 ring_tx_descriptor_display(const struct rte_memzone *ring_mz, uint16_t desc_id)
 {
-	struct igb_ring_desc *ring;
-	struct igb_ring_desc rd;
+	struct igb_ring_desc_16_bytes *ring;
+	struct igb_ring_desc_16_bytes txd;
 
-	ring = (struct igb_ring_desc *) ring_mz->addr;
-	rd.lo_dword = rte_le_to_cpu_64(ring[desc_id].lo_dword);
-	rd.hi_dword = rte_le_to_cpu_64(ring[desc_id].hi_dword);
+	ring = (struct igb_ring_desc_16_bytes *)ring_mz->addr;
+	txd.lo_dword = rte_le_to_cpu_64(ring[desc_id].lo_dword);
+	txd.hi_dword = rte_le_to_cpu_64(ring[desc_id].hi_dword);
 	printf("    0x%08X - 0x%08X / 0x%08X - 0x%08X\n",
-		(unsigned)rd.lo_dword.words.lo, (unsigned)rd.lo_dword.words.hi,
-		(unsigned)rd.hi_dword.words.lo, (unsigned)rd.hi_dword.words.hi);
+		(unsigned)txd.lo_dword.words.lo, (unsigned)txd.lo_dword.words.hi,
+		(unsigned)txd.hi_dword.words.lo, (unsigned)txd.hi_dword.words.hi);
 }
 
 void
@@ -644,7 +667,7 @@ rx_ring_desc_display(portid_t port_id, queueid_t rxq_id, uint16_t rxd_id)
 	rx_mz = ring_dma_zone_lookup("rx_ring", port_id, rxq_id);
 	if (rx_mz == NULL)
 		return;
-	ring_rx_descriptor_display(rx_mz, rxd_id);
+	ring_rx_descriptor_display(rx_mz, port_id, rxd_id);
 }
 
 void
-- 
1.8.1.4

Re: [dpdk-dev] [PATCH v2 7/7] app/testpmd: rework for displaying different size of RX descriptors

[Thomas Monjalon]

Hi Helin,

Thanks for this new patchset version.

2014-06-23 20:57, Helin Zhang:
> i40e supports 16 and 32 bytes RX descriptors which can be configured.
> It needs to check the driver type and the configuration to determine
> if 16 or 32 bytes RX descriptors is being used, for reading and
> displaying the different sizes of RX descriptors.
> 
> Signed-off-by: Helin Zhang <helin.zhang@intel.com>
> Acked-by: Jing Chen <jing.d.chen@intel.com>
> Acked-by: Cunming Liang <cunming.liang@intel.com>

Just before applying theses patches, I checked with checkpatch.pl which warned 
me about this:

> +		ring_rxd_display_dword(rte_le_to_cpu_64(\
> +				ring[desc_id].lo_dword));
> +		ring_rxd_display_dword(rte_le_to_cpu_64(\
> +				ring[desc_id].hi_dword));
> +		ring_rxd_display_dword(rte_le_to_cpu_64(\
> +				ring[desc_id].resv1));
> +		ring_rxd_display_dword(rte_le_to_cpu_64(\
> +				ring[desc_id].resv2));

WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations

Could you remove it please?

Thanks
-- 
Thomas