[dpdk-dev] [PATCH] compress/qat: add dynamic sgl allocation

[Tomasz Jozwiak <tomaszx.jozwiak@intel.com>]

This patch adds dynamic SGL allocation instead of static one.
The number of element in SGL can be adjusted in each operation
depend of the request.

Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
---
 config/common_base                   |  1 -
 doc/guides/compressdevs/qat_comp.rst |  1 -
 doc/guides/cryptodevs/qat.rst        |  5 ----
 drivers/compress/qat/qat_comp.c      | 56 ++++++++++++++++++++++++++++++++----
 drivers/compress/qat/qat_comp.h      | 13 ++++-----
 drivers/compress/qat/qat_comp_pmd.c  | 49 ++++++++++++++++++++++++++-----
 6 files changed, 99 insertions(+), 26 deletions(-)

diff --git a/config/common_base b/config/common_base
index 7c6da51..5df1752 100644
--- a/config/common_base
+++ b/config/common_base
@@ -549,7 +549,6 @@ CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
 # Max. number of QuickAssist devices, which can be detected and attached
 #
 CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
-CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS=16
 CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
 
 #
diff --git a/doc/guides/compressdevs/qat_comp.rst b/doc/guides/compressdevs/qat_comp.rst
index 5631cb1..6f583a4 100644
--- a/doc/guides/compressdevs/qat_comp.rst
+++ b/doc/guides/compressdevs/qat_comp.rst
@@ -35,7 +35,6 @@ Limitations
 * Compressdev level 0, no compression, is not supported.
 * Queue pairs are not thread-safe (that is, within a single queue pair, RX and TX from different lcores is not supported).
 * No BSD support as BSD QAT kernel driver not available.
-* Number of segments in mbuf chains in the op must be <= RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS from the config file.
 * When using Deflate dynamic huffman encoding for compression, the input size (op.src.length)
   must be < CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE from the config file,
   see :ref:`building_qat_config` for more details.
diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
index b079aa3..1f6b0d8 100644
--- a/doc/guides/cryptodevs/qat.rst
+++ b/doc/guides/cryptodevs/qat.rst
@@ -156,7 +156,6 @@ These are the build configuration options affecting QAT, and their default value
 	CONFIG_RTE_LIBRTE_PMD_QAT=y
 	CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
 	CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
-	CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS=16
 	CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
 
 CONFIG_RTE_LIBRTE_PMD_QAT must be enabled for any QAT PMD to be built.
@@ -174,10 +173,6 @@ Note, there are separate config items for max cryptodevs CONFIG_RTE_CRYPTO_MAX_D
 and max compressdevs CONFIG_RTE_COMPRESS_MAX_DEVS, if necessary these should be
 adjusted to handle the total of QAT and other devices which the process will use.
 
-QAT allocates internal structures to handle SGLs. For the compression service
-CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS can be changed if more segments are needed.
-An extra (max_inflight_ops x 16) bytes per queue_pair will be used for every increment.
-
 QAT compression PMD needs intermediate buffers to support Deflate compression
 with Dynamic Huffman encoding. CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE
 specifies the size of a single buffer, the PMD will allocate a multiple of these,
diff --git a/drivers/compress/qat/qat_comp.c b/drivers/compress/qat/qat_comp.c
index 32ca753..0c03bc3 100644
--- a/drivers/compress/qat/qat_comp.c
+++ b/drivers/compress/qat/qat_comp.c
@@ -1,5 +1,5 @@
 /* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2018 Intel Corporation
+ * Copyright(c) 2018-2019 Intel Corporation
  */
 
 #include <rte_mempool.h>
@@ -55,22 +55,68 @@ qat_comp_build_request(void *in_op, uint8_t *out_msg,
 		ICP_QAT_FW_COMN_PTR_TYPE_SET(comp_req->comn_hdr.comn_req_flags,
 				QAT_COMN_PTR_TYPE_SGL);
 
+		if (unlikely(op->m_src->nb_segs > cookie->src_nb_elems)) {
+			/* we need to allocate more elements in SGL*/
+			void *tmp;
+
+			tmp = rte_realloc(cookie->qat_sgl_src_d,
+					  sizeof(struct qat_sgl) +
+					  sizeof(struct qat_flat_buf) *
+					  op->m_src->nb_segs, 64);
+
+			if (unlikely(tmp == NULL)) {
+				QAT_DP_LOG(ERR, "QAT PMD can't allocate memory"
+					   " for %d elements of SGL",
+					   op->m_src->nb_segs);
+				op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+				return -ENOMEM;
+			}
+			/* new SGL is valid now */
+			cookie->qat_sgl_src_d = (struct qat_sgl *)tmp;
+			cookie->src_nb_elems = op->m_src->nb_segs;
+			cookie->qat_sgl_src_phys_addr =
+				rte_malloc_virt2iova(cookie->qat_sgl_src_d);
+		}
+
 		ret = qat_sgl_fill_array(op->m_src,
 				op->src.offset,
-				&cookie->qat_sgl_src,
+				cookie->qat_sgl_src_d,
 				op->src.length,
-				RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS);
+				(const uint16_t)cookie->src_nb_elems);
 		if (ret) {
 			QAT_DP_LOG(ERR, "QAT PMD Cannot fill source sgl array");
 			op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
 			return ret;
 		}
 
+		if (unlikely(op->m_dst->nb_segs > cookie->dst_nb_elems)) {
+			/* we need to allocate more elements in SGL*/
+			struct qat_sgl *tmp;
+
+			tmp = rte_realloc(cookie->qat_sgl_dst_d,
+					  sizeof(struct qat_sgl) +
+					  sizeof(struct qat_flat_buf) *
+					  op->m_dst->nb_segs, 64);
+
+			if (unlikely(tmp == NULL)) {
+				QAT_DP_LOG(ERR, "QAT PMD can't allocate memory"
+					   " for %d elements of SGL",
+					   op->m_dst->nb_segs);
+				op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+				return -EINVAL;
+			}
+			/* new SGL is valid now */
+			cookie->qat_sgl_dst_d = (struct qat_sgl *)tmp;
+			cookie->dst_nb_elems = op->m_dst->nb_segs;
+			cookie->qat_sgl_dst_phys_addr =
+				rte_malloc_virt2iova(cookie->qat_sgl_dst_d);
+		}
+
 		ret = qat_sgl_fill_array(op->m_dst,
 				op->dst.offset,
-				&cookie->qat_sgl_dst,
+				cookie->qat_sgl_dst_d,
 				comp_req->comp_pars.out_buffer_sz,
-				RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS);
+				(const uint16_t)cookie->dst_nb_elems);
 		if (ret) {
 			QAT_DP_LOG(ERR, "QAT PMD Cannot fill dest. sgl array");
 			op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
diff --git a/drivers/compress/qat/qat_comp.h b/drivers/compress/qat/qat_comp.h
index 19f48df..2465f12 100644
--- a/drivers/compress/qat/qat_comp.h
+++ b/drivers/compress/qat/qat_comp.h
@@ -1,5 +1,5 @@
 /* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2015-2018 Intel Corporation
+ * Copyright(c) 2015-2019 Intel Corporation
  */
 
 #ifndef _QAT_COMP_H_
@@ -37,16 +37,15 @@ struct qat_inter_sgl {
 	struct qat_flat_buf buffers[QAT_NUM_BUFS_IN_IM_SGL];
 } __rte_packed __rte_cache_aligned;
 
-struct qat_comp_sgl {
-	qat_sgl_hdr;
-	struct qat_flat_buf buffers[RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS];
-} __rte_packed __rte_cache_aligned;
 
 struct qat_comp_op_cookie {
-	struct qat_comp_sgl qat_sgl_src;
-	struct qat_comp_sgl qat_sgl_dst;
 	phys_addr_t qat_sgl_src_phys_addr;
 	phys_addr_t qat_sgl_dst_phys_addr;
+	/* dynamically created SGLs */
+	uint16_t src_nb_elems;
+	uint16_t dst_nb_elems;
+	struct qat_sgl *qat_sgl_src_d;
+	struct qat_sgl *qat_sgl_dst_d;
 };
 
 struct qat_comp_xform {
diff --git a/drivers/compress/qat/qat_comp_pmd.c b/drivers/compress/qat/qat_comp_pmd.c
index 27c8856..f034a19 100644
--- a/drivers/compress/qat/qat_comp_pmd.c
+++ b/drivers/compress/qat/qat_comp_pmd.c
@@ -1,10 +1,14 @@
 /* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2015-2018 Intel Corporation
+ * Copyright(c) 2015-2019 Intel Corporation
  */
 
+#include <rte_malloc.h>
+
 #include "qat_comp.h"
 #include "qat_comp_pmd.h"
 
+#define QAT_PMD_COMP_SGL_DEF_SEGMENTS 16
+
 static const struct rte_compressdev_capabilities qat_comp_gen_capabilities[] = {
 	{/* COMPRESSION - deflate */
 	 .algo = RTE_COMP_ALGO_DEFLATE,
@@ -60,6 +64,10 @@ static int
 qat_comp_qp_release(struct rte_compressdev *dev, uint16_t queue_pair_id)
 {
 	struct qat_comp_dev_private *qat_private = dev->data->dev_private;
+	struct qat_qp **qp_addr =
+		(struct qat_qp **)&(dev->data->queue_pairs[queue_pair_id]);
+	struct qat_qp *qp = (struct qat_qp *)*qp_addr;
+	uint32_t i;
 
 	QAT_LOG(DEBUG, "Release comp qp %u on device %d",
 				queue_pair_id, dev->data->dev_id);
@@ -67,6 +75,14 @@ qat_comp_qp_release(struct rte_compressdev *dev, uint16_t queue_pair_id)
 	qat_private->qat_dev->qps_in_use[QAT_SERVICE_COMPRESSION][queue_pair_id]
 						= NULL;
 
+	for (i = 0; i < qp->nb_descriptors; i++) {
+
+		struct qat_comp_op_cookie *cookie = qp->op_cookies[i];
+
+		rte_free(cookie->qat_sgl_src_d);
+		rte_free(cookie->qat_sgl_dst_d);
+	}
+
 	return qat_qp_release((struct qat_qp **)
 			&(dev->data->queue_pairs[queue_pair_id]));
 }
@@ -122,15 +138,34 @@ qat_comp_qp_setup(struct rte_compressdev *dev, uint16_t qp_id,
 		struct qat_comp_op_cookie *cookie =
 				qp->op_cookies[i];
 
+		cookie->qat_sgl_src_d = rte_zmalloc_socket(NULL,
+					sizeof(struct qat_sgl) +
+					sizeof(struct qat_flat_buf) *
+					QAT_PMD_COMP_SGL_DEF_SEGMENTS,
+					64, socket_id);
+
+		cookie->qat_sgl_dst_d = rte_zmalloc_socket(NULL,
+					sizeof(struct qat_sgl) +
+					sizeof(struct qat_flat_buf) *
+					QAT_PMD_COMP_SGL_DEF_SEGMENTS,
+					64, socket_id);
+
+		if (cookie->qat_sgl_src_d == NULL ||
+				cookie->qat_sgl_dst_d == NULL) {
+			QAT_LOG(ERR, "Can't allocate SGL"
+				     " for device %s",
+				     qat_private->qat_dev->name);
+			return -ENOMEM;
+		}
+
 		cookie->qat_sgl_src_phys_addr =
-				rte_mempool_virt2iova(cookie) +
-				offsetof(struct qat_comp_op_cookie,
-				qat_sgl_src);
+				rte_malloc_virt2iova(cookie->qat_sgl_src_d);
 
 		cookie->qat_sgl_dst_phys_addr =
-				rte_mempool_virt2iova(cookie) +
-				offsetof(struct qat_comp_op_cookie,
-				qat_sgl_dst);
+				rte_malloc_virt2iova(cookie->qat_sgl_dst_d);
+
+		cookie->dst_nb_elems = cookie->src_nb_elems =
+				QAT_PMD_COMP_SGL_DEF_SEGMENTS;
 	}
 
 	return ret;
-- 
2.7.4