From: Raslan Darawsheh <rasland@mellanox.com>
To: "gaetan.rivet@6wind.com" <gaetan.rivet@6wind.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
Thomas Monjalon <thomas@monjalon.net>,
Raslan Darawsheh <rasland@mellanox.com>
Subject: [dpdk-dev] [PATCH 2/4] net/failsafe: change back-reference from sub-device
Date: Thu, 28 Feb 2019 15:49:26 +0000 [thread overview]
Message-ID: <1551368952-1871-3-git-send-email-rasland@mellanox.com> (raw)
In-Reply-To: <1551368952-1871-1-git-send-email-rasland@mellanox.com>
In multiprocess context, the sub-device structure is shared
between processes. The reference to the failsafe device was
a per process pointer. It's changed to port id which is the
same for all processes.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
---
drivers/net/failsafe/failsafe_eal.c | 2 +-
drivers/net/failsafe/failsafe_ether.c | 15 ++++++++-------
drivers/net/failsafe/failsafe_intr.c | 10 +++++-----
drivers/net/failsafe/failsafe_private.h | 11 ++++++++---
4 files changed, 22 insertions(+), 16 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 8a888b1..56d1669 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -114,7 +114,7 @@ fs_bus_init(struct rte_eth_dev *dev)
}
ETH(sdev) = &rte_eth_devices[pid];
SUB_ID(sdev) = i;
- sdev->fs_dev = dev;
+ sdev->fs_port_id = dev->data->port_id;
sdev->dev = ETH(sdev)->device;
sdev->state = DEV_PROBED;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 1783165..8d958e0 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -298,7 +298,7 @@ fs_dev_remove(struct sub_device *sdev)
break;
}
sdev->remove = 0;
- failsafe_hotplug_alarm_install(sdev->fs_dev);
+ failsafe_hotplug_alarm_install(FSDEV_FROM_SUBDEV(sdev));
}
static void
@@ -318,8 +318,9 @@ fs_dev_stats_save(struct sub_device *sdev)
WARN("Using latest snapshot taken before %"PRIu64" seconds.\n",
(rte_rdtsc() - timestamp) / rte_get_tsc_hz());
}
- failsafe_stats_increment(&PRIV(sdev->fs_dev)->stats_accumulator,
- err ? &sdev->stats_snapshot.stats : &stats);
+ failsafe_stats_increment
+ (&PRIV(FSDEV_FROM_SUBDEV(sdev))->stats_accumulator,
+ err ? &sdev->stats_snapshot.stats : &stats);
memset(&sdev->stats_snapshot, 0, sizeof(sdev->stats_snapshot));
}
@@ -566,17 +567,17 @@ failsafe_eth_rmv_event_callback(uint16_t port_id __rte_unused,
{
struct sub_device *sdev = cb_arg;
- fs_lock(sdev->fs_dev, 0);
+ fs_lock(FSDEV_FROM_SUBDEV(sdev), 0);
/* Switch as soon as possible tx_dev. */
- fs_switch_dev(sdev->fs_dev, sdev);
+ fs_switch_dev(FSDEV_FROM_SUBDEV(sdev), sdev);
/* Use safe bursts in any case. */
- failsafe_set_burst_fn(sdev->fs_dev, 1);
+ failsafe_set_burst_fn(FSDEV_FROM_SUBDEV(sdev), 1);
/*
* Async removal, the sub-PMD will try to unregister
* the callback at the source of the current thread context.
*/
sdev->remove = 1;
- fs_unlock(sdev->fs_dev, 0);
+ fs_unlock(FSDEV_FROM_SUBDEV(sdev), 0);
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_intr.c b/drivers/net/failsafe/failsafe_intr.c
index 09aa3c6..6fe5816 100644
--- a/drivers/net/failsafe/failsafe_intr.c
+++ b/drivers/net/failsafe/failsafe_intr.c
@@ -274,14 +274,14 @@ failsafe_eth_rx_intr_ctl_subdevice(struct sub_device *sdev, int op)
int rc;
int ret = 0;
+ fsdev = FSDEV_FROM_SUBDEV(sdev);
if (sdev == NULL || (ETH(sdev) == NULL) ||
- sdev->fs_dev == NULL || (PRIV(sdev->fs_dev) == NULL)) {
+ fsdev == NULL || (PRIV(fsdev) == NULL)) {
ERROR("Called with invalid arguments");
return -EINVAL;
}
dev = ETH(sdev);
- fsdev = sdev->fs_dev;
- epfd = PRIV(sdev->fs_dev)->rxp.efd;
+ epfd = PRIV(fsdev)->rxp.efd;
pid = PORT_ID(sdev);
if (epfd <= 0) {
@@ -330,7 +330,7 @@ int failsafe_rx_intr_install_subdevice(struct sub_device *sdev)
const struct rte_intr_conf *const intr_conf =
Ð(sdev)->data->dev_conf.intr_conf;
- fsdev = sdev->fs_dev;
+ fsdev = FSDEV_FROM_SUBDEV(sdev);
rxq = (struct rxq **)fsdev->data->rx_queues;
if (intr_conf->rxq == 0)
return 0;
@@ -368,7 +368,7 @@ void failsafe_rx_intr_uninstall_subdevice(struct sub_device *sdev)
struct rte_eth_dev *fsdev;
struct rxq *fsrxq;
- fsdev = sdev->fs_dev;
+ fsdev = FSDEV_FROM_SUBDEV(sdev);
for (qid = 0; qid < ETH(sdev)->data->nb_rx_queues; qid++) {
if (qid < fsdev->data->nb_rx_queues) {
fsrxq = fsdev->data->rx_queues[qid];
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 91b7167..9b53a19 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -117,7 +117,7 @@ struct sub_device {
/* Others are retrieved through a file descriptor */
char *fd_str;
/* fail-safe device backreference */
- struct rte_eth_dev *fs_dev;
+ uint16_t fs_port_id; /* shared between processes*/
/* flag calling for recollection */
volatile unsigned int remove:1;
/* flow isolation state */
@@ -251,6 +251,9 @@ extern int failsafe_mac_from_arg;
/* dev: (struct rte_eth_dev *) fail-safe device */
#define PRIV(dev) \
((struct fs_priv *)(dev)->data->dev_private)
+/* sdev: (struct sub_device *) */
+#define FSDEV_FROM_SUBDEV(sdev) \
+ (&rte_eth_devices[sdev->fs_port_id])
/* sdev: (struct sub_device *) */
#define ETH(sdev) \
@@ -324,7 +327,8 @@ extern int failsafe_mac_from_arg;
*/
#define FS_ATOMIC_RX(s, i) \
rte_atomic64_read( \
- &((struct rxq *)((s)->fs_dev->data->rx_queues[i]))->refcnt[(s)->sid] \
+ &((struct rxq *) \
+ (FSDEV_FROM_SUBDEV(s)->data->rx_queues[i]))->refcnt[(s)->sid] \
)
/**
* s: (struct sub_device *)
@@ -332,7 +336,8 @@ extern int failsafe_mac_from_arg;
*/
#define FS_ATOMIC_TX(s, i) \
rte_atomic64_read( \
- &((struct txq *)((s)->fs_dev->data->tx_queues[i]))->refcnt[(s)->sid] \
+ &((struct txq *) \
+ (FSDEV_FROM_SUBDEV(s)->data->tx_queues[i]))->refcnt[(s)->sid] \
)
#ifdef RTE_EXEC_ENV_BSDAPP
--
2.7.4
next prev parent reply other threads:[~2019-02-28 15:49 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-28 15:49 [dpdk-dev] [PATCH 0/4] support secondary process for failsafe Raslan Darawsheh
2019-02-28 15:49 ` [dpdk-dev] [PATCH 1/4] net/failsafe: replace local device with shared data Raslan Darawsheh
2019-02-28 16:27 ` Thomas Monjalon
2019-02-28 15:49 ` Raslan Darawsheh [this message]
2019-02-28 17:16 ` [dpdk-dev] [PATCH 2/4] net/failsafe: change back-reference from sub-device Stephen Hemminger
2019-02-28 15:49 ` [dpdk-dev] [PATCH 3/4] net/failsafe: replace local sub-device with shared data Raslan Darawsheh
2019-02-28 17:22 ` Stephen Hemminger
2019-02-28 15:49 ` [dpdk-dev] [PATCH 4/4] net/failsafe: support secondary process Raslan Darawsheh
2019-02-28 17:23 ` Stephen Hemminger
2019-02-28 17:24 ` Stephen Hemminger
2019-03-05 9:33 ` Raslan Darawsheh
2019-03-05 10:00 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1551368952-1871-3-git-send-email-rasland@mellanox.com \
--to=rasland@mellanox.com \
--cc=dev@dpdk.org \
--cc=gaetan.rivet@6wind.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).