From: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
To: dev@dpdk.org, fiona.trahe@intel.com, tomaszx.jozwiak@intel.com
Subject: [dpdk-dev] [PATCH] app/compress-perf: add incompressible data handling
Date: Fri, 1 Mar 2019 09:45:10 +0100 [thread overview]
Message-ID: <1551429910-16248-1-git-send-email-tomaszx.jozwiak@intel.com> (raw)
Currently, compress-perf doesn't respect incompressible
data inside one operation.
This patch adds such a functionality. Now the output buffer
in one operation is big enough to store such a data after
compression. Also added segment size checking to pass
values in right range.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
---
app/test-compress-perf/comp_perf_options.h | 5 ++++
app/test-compress-perf/comp_perf_options_parse.c | 11 ++++++--
app/test-compress-perf/comp_perf_test_benchmark.c | 9 ++++--
app/test-compress-perf/comp_perf_test_verify.c | 9 ++++--
app/test-compress-perf/main.c | 34 +++++++++++++++++++----
5 files changed, 55 insertions(+), 13 deletions(-)
diff --git a/app/test-compress-perf/comp_perf_options.h b/app/test-compress-perf/comp_perf_options.h
index ca96a3c..f87751d 100644
--- a/app/test-compress-perf/comp_perf_options.h
+++ b/app/test-compress-perf/comp_perf_options.h
@@ -8,6 +8,10 @@
#define MAX_DRIVER_NAME 64
#define MAX_INPUT_FILE_NAME 64
#define MAX_LIST 32
+#define MIN_COMPRESSED_BUF_SIZE 8
+#define EXPANSE_RATIO 1.05
+#define MAX_MBUF_DATA_SIZE (UINT16_MAX - RTE_PKTMBUF_HEADROOM)
+#define MAX_SEG_SIZE ((int)(MAX_MBUF_DATA_SIZE / EXPANSE_RATIO))
enum comp_operation {
COMPRESS_ONLY,
@@ -38,6 +42,7 @@ struct comp_test_data {
struct rte_mempool *op_pool;
int8_t cdev_id;
uint16_t seg_sz;
+ uint16_t out_seg_sz;
uint16_t burst_sz;
uint32_t pool_sz;
uint32_t num_iter;
diff --git a/app/test-compress-perf/comp_perf_options_parse.c b/app/test-compress-perf/comp_perf_options_parse.c
index 66eb81f..9f18ffa 100644
--- a/app/test-compress-perf/comp_perf_options_parse.c
+++ b/app/test-compress-perf/comp_perf_options_parse.c
@@ -326,8 +326,15 @@ parse_seg_sz(struct comp_test_data *test_data, const char *arg)
return -1;
}
- if (test_data->seg_sz == 0) {
- RTE_LOG(ERR, USER1, "Segment size must be higher than 0\n");
+ if (test_data->seg_sz < MIN_COMPRESSED_BUF_SIZE) {
+ RTE_LOG(ERR, USER1, "Segment size must be higher than %d\n",
+ MIN_COMPRESSED_BUF_SIZE - 1);
+ return -1;
+ }
+
+ if (test_data->seg_sz > MAX_SEG_SIZE) {
+ RTE_LOG(ERR, USER1, "Segment size must be lower than %d\n",
+ MAX_SEG_SIZE + 1);
return -1;
}
diff --git a/app/test-compress-perf/comp_perf_test_benchmark.c b/app/test-compress-perf/comp_perf_test_benchmark.c
index 9aa2665..5752906 100644
--- a/app/test-compress-perf/comp_perf_test_benchmark.c
+++ b/app/test-compress-perf/comp_perf_test_benchmark.c
@@ -22,6 +22,7 @@ main_loop(struct comp_test_data *test_data, uint8_t level,
struct rte_mbuf **input_bufs, **output_bufs;
int res = 0;
int allocated = 0;
+ uint32_t out_seg_sz;
if (test_data == NULL || !test_data->burst_sz) {
RTE_LOG(ERR, USER1,
@@ -55,6 +56,7 @@ main_loop(struct comp_test_data *test_data, uint8_t level,
};
input_bufs = test_data->decomp_bufs;
output_bufs = test_data->comp_bufs;
+ out_seg_sz = test_data->out_seg_sz;
} else {
xform = (struct rte_comp_xform) {
.type = RTE_COMP_DECOMPRESS,
@@ -67,6 +69,7 @@ main_loop(struct comp_test_data *test_data, uint8_t level,
};
input_bufs = test_data->comp_bufs;
output_bufs = test_data->decomp_bufs;
+ out_seg_sz = test_data->seg_sz;
}
/* Create private xform */
@@ -130,7 +133,7 @@ main_loop(struct comp_test_data *test_data, uint8_t level,
/* Reset all data in output buffers */
struct rte_mbuf *m = output_bufs[buf_id];
- m->pkt_len = test_data->seg_sz * m->nb_segs;
+ m->pkt_len = out_seg_sz * m->nb_segs;
while (m) {
m->data_len = m->buf_len - m->data_off;
m = m->next;
@@ -187,7 +190,7 @@ main_loop(struct comp_test_data *test_data, uint8_t level,
while (remaining_data > 0) {
data_to_append =
RTE_MIN(remaining_data,
- test_data->seg_sz);
+ out_seg_sz);
m->data_len = data_to_append;
remaining_data -=
data_to_append;
@@ -236,7 +239,7 @@ main_loop(struct comp_test_data *test_data, uint8_t level,
while (remaining_data > 0) {
data_to_append =
RTE_MIN(remaining_data,
- test_data->seg_sz);
+ out_seg_sz);
m->data_len = data_to_append;
remaining_data -=
data_to_append;
diff --git a/app/test-compress-perf/comp_perf_test_verify.c b/app/test-compress-perf/comp_perf_test_verify.c
index 57a9930..28a0fe8 100644
--- a/app/test-compress-perf/comp_perf_test_verify.c
+++ b/app/test-compress-perf/comp_perf_test_verify.c
@@ -24,6 +24,7 @@ main_loop(struct comp_test_data *test_data, uint8_t level,
struct rte_mbuf **input_bufs, **output_bufs;
int res = 0;
int allocated = 0;
+ uint32_t out_seg_sz;
if (test_data == NULL || !test_data->burst_sz) {
RTE_LOG(ERR, USER1,
@@ -57,6 +58,7 @@ main_loop(struct comp_test_data *test_data, uint8_t level,
};
input_bufs = test_data->decomp_bufs;
output_bufs = test_data->comp_bufs;
+ out_seg_sz = test_data->out_seg_sz;
} else {
xform = (struct rte_comp_xform) {
.type = RTE_COMP_DECOMPRESS,
@@ -69,6 +71,7 @@ main_loop(struct comp_test_data *test_data, uint8_t level,
};
input_bufs = test_data->comp_bufs;
output_bufs = test_data->decomp_bufs;
+ out_seg_sz = test_data->seg_sz;
}
/* Create private xform */
@@ -130,7 +133,7 @@ main_loop(struct comp_test_data *test_data, uint8_t level,
/* Reset all data in output buffers */
struct rte_mbuf *m = output_bufs[buf_id];
- m->pkt_len = test_data->seg_sz * m->nb_segs;
+ m->pkt_len = out_seg_sz * m->nb_segs;
while (m) {
m->data_len = m->buf_len - m->data_off;
m = m->next;
@@ -209,7 +212,7 @@ main_loop(struct comp_test_data *test_data, uint8_t level,
while (remaining_data > 0) {
data_to_append =
RTE_MIN(remaining_data,
- test_data->seg_sz);
+ out_seg_sz);
m->data_len = data_to_append;
remaining_data -=
data_to_append;
@@ -280,7 +283,7 @@ main_loop(struct comp_test_data *test_data, uint8_t level,
while (remaining_data > 0) {
data_to_append =
RTE_MIN(remaining_data,
- test_data->seg_sz);
+ out_seg_sz);
m->data_len = data_to_append;
remaining_data -=
data_to_append;
diff --git a/app/test-compress-perf/main.c b/app/test-compress-perf/main.c
index 4de913e..c2a45d1 100644
--- a/app/test-compress-perf/main.c
+++ b/app/test-compress-perf/main.c
@@ -13,8 +13,6 @@
#define NUM_MAX_XFORMS 16
#define NUM_MAX_INFLIGHT_OPS 512
-#define EXPANSE_RATIO 1.05
-#define MIN_COMPRESSED_BUF_SIZE 8
#define DIV_CEIL(a, b) ((a) / (b) + ((a) % (b) != 0))
@@ -117,9 +115,34 @@ comp_perf_check_capabilities(struct comp_test_data *test_data)
return 0;
}
+static uint32_t
+find_buf_size(uint32_t input_size)
+{
+ uint32_t i;
+
+ /* From performance point of view the buffer size should be a
+ * power of 2 but also should be enough to store incompressible data
+ */
+
+ /* We're looking for nearest power of 2 buffer size, which is greather
+ * than input_size
+ */
+ uint32_t size =
+ !input_size ? MIN_COMPRESSED_BUF_SIZE : (input_size << 1);
+
+ for (i = UINT16_MAX + 1; !(i & size); i >>= 1)
+ ;
+
+ return i > ((UINT16_MAX + 1) >> 1)
+ ? (uint32_t)((float)input_size * EXPANSE_RATIO)
+ : i;
+}
+
static int
comp_perf_allocate_memory(struct comp_test_data *test_data)
{
+
+ test_data->out_seg_sz = find_buf_size(test_data->seg_sz);
/* Number of segments for input and output
* (compression and decompression)
*/
@@ -127,7 +150,8 @@ comp_perf_allocate_memory(struct comp_test_data *test_data)
test_data->seg_sz);
test_data->comp_buf_pool = rte_pktmbuf_pool_create("comp_buf_pool",
total_segs,
- 0, 0, test_data->seg_sz + RTE_PKTMBUF_HEADROOM,
+ 0, 0,
+ test_data->out_seg_sz + RTE_PKTMBUF_HEADROOM,
rte_socket_id());
if (test_data->comp_buf_pool == NULL) {
RTE_LOG(ERR, USER1, "Mbuf mempool could not be created\n");
@@ -396,7 +420,7 @@ prepare_bufs(struct comp_test_data *test_data)
}
data_addr = (uint8_t *) rte_pktmbuf_append(
test_data->comp_bufs[i],
- test_data->seg_sz);
+ test_data->out_seg_sz);
if (data_addr == NULL) {
RTE_LOG(ERR, USER1, "Could not append data\n");
return -1;
@@ -414,7 +438,7 @@ prepare_bufs(struct comp_test_data *test_data)
}
data_addr = (uint8_t *)rte_pktmbuf_append(next_seg,
- test_data->seg_sz);
+ test_data->out_seg_sz);
if (data_addr == NULL) {
RTE_LOG(ERR, USER1, "Could not append data\n");
--
2.7.4
next reply other threads:[~2019-03-01 8:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-01 8:45 Tomasz Jozwiak [this message]
2019-03-28 15:07 ` Trahe, Fiona
2019-03-28 15:07 ` Trahe, Fiona
2019-03-29 15:42 ` Akhil Goyal
2019-03-29 15:42 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1551429910-16248-1-git-send-email-tomaszx.jozwiak@intel.com \
--to=tomaszx.jozwiak@intel.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).