DPDK patches and discussions
 help / color / mirror / Atom feed
From: Dekel Peled <dekelp@mellanox.com>
To: jingjing.wu@intel.com, wenzhuo.lu@intel.com
Cc: dev@dpdk.org, orika@mellanox.com, stable@dpdk.org
Subject: [dpdk-dev] [PATCH] doc: fix typos in testpmd user guide
Date: Sun, 31 Mar 2019 13:20:55 +0300	[thread overview]
Message-ID: <1554027655-25790-1-git-send-email-dekelp@mellanox.com> (raw)

Correct typing mistakes in several places.
1) "Those command will" ==> "These commands will"
2) icmp6_nd_opt_sla_eth ==> icmp6_nd_opt_tla_eth
   (change 's' to 't' for 'target' where applicable)

Fixes: 1960be7d32f8 ("app/testpmd: add VXLAN encap/decap")
Cc: stable@dpdk.org

Signed-off-by: Dekel Peled <dekelp@mellanox.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index c6f8b2c..9de3bf7 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1587,7 +1587,7 @@ Configure the outer layer to encapsulate a packet inside a VXLAN tunnel::
  udp-dst (udp-dst) ip-tos (ip-tos) ip-ttl (ip-ttl) ip-src (ip-src) \
  ip-dst (ip-dst) eth-src (eth-src) eth-dst (eth-dst)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action vxlan_encap will use the last configuration set.
 To have a different encapsulation header, one of those commands must be called
 before the flow rule creation.
@@ -1602,7 +1602,7 @@ Configure the outer layer to encapsulate a packet inside a NVGRE tunnel::
  set nvgre-with-vlan ip-version (ipv4|ipv6) tni (tni) ip-src (ip-src) \
         ip-dst (ip-dst) vlan-tci (vlan-tci) eth-src (eth-src) eth-dst (eth-dst)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action nvgre_encap will use the last configuration set.
 To have a different encapsulation header, one of those commands must be called
 before the flow rule creation.
@@ -1645,7 +1645,7 @@ Configure the outer layer to encapsulate a packet inside a MPLSoGRE tunnel::
         ip-src (ip-src) ip-dst (ip-dst) vlan-tci (vlan-tci) \
         eth-src (eth-src) eth-dst (eth-dst)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action mplsogre_encap will use the last configuration set.
 To have a different encapsulation header, one of those commands must be called
 before the flow rule creation.
@@ -1658,7 +1658,7 @@ Configure the outer layer to decapsulate MPLSoGRE packet::
  set mplsogre_decap ip-version (ipv4|ipv6)
  set mplsogre_decap-with-vlan ip-version (ipv4|ipv6)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action mplsogre_decap will use the last configuration set.
 To have a different decapsulation header, one of those commands must be called
 before the flow rule creation.
@@ -1675,7 +1675,7 @@ Configure the outer layer to encapsulate a packet inside a MPLSoUDP tunnel::
         udp-src (udp-src) udp-dst (udp-dst) ip-src (ip-src) ip-dst (ip-dst) \
         vlan-tci (vlan-tci) eth-src (eth-src) eth-dst (eth-dst)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action mplsoudp_encap will use the last configuration set.
 To have a different encapsulation header, one of those commands must be called
 before the flow rule creation.
@@ -1688,7 +1688,7 @@ Configure the outer layer to decapsulate MPLSoUDP packet::
  set mplsoudp_decap ip-version (ipv4|ipv6)
  set mplsoudp_decap-with-vlan ip-version (ipv4|ipv6)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action mplsoudp_decap will use the last configuration set.
 To have a different decapsulation header, one of those commands must be called
 before the flow rule creation.
@@ -3709,7 +3709,7 @@ This section lists supported pattern items and their attributes, if any.
 
   - ``sla {MAC-48}``: source Ethernet LLA.
 
-- ``icmp6_nd_opt_sla_eth``: match ICMPv6 neighbor discovery target Ethernet
+- ``icmp6_nd_opt_tla_eth``: match ICMPv6 neighbor discovery target Ethernet
   link-layer address option.
 
   - ``tla {MAC-48}``: target Ethernet LLA.
-- 
1.8.3.1

             reply	other threads:[~2019-03-31 10:22 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-31 10:20 Dekel Peled [this message]
2019-03-31 10:20 ` Dekel Peled
2019-04-01 16:19 ` Iremonger, Bernard
2019-04-01 16:19   ` Iremonger, Bernard
2019-04-02 15:32   ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit
2019-04-02 15:32     ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1554027655-25790-1-git-send-email-dekelp@mellanox.com \
    --to=dekelp@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=jingjing.wu@intel.com \
    --cc=orika@mellanox.com \
    --cc=stable@dpdk.org \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).