* [dpdk-dev] [PATCH] ethdev: fix QinQ strip offload support
@ 2019-04-13 8:54 Vivek Kumar Sharma
2019-04-13 8:54 ` Vivek Kumar Sharma
0 siblings, 1 reply; 8+ messages in thread
From: Vivek Kumar Sharma @ 2019-04-13 8:54 UTC (permalink / raw)
To: dev; +Cc: thomas, ferruh.yigit, arybchenko, Vivek Kumar Sharma, stable
Enable missing support for QinQ strip rx offload
in vlan offload set/get methods.
Fixes: cc9d0456b870 ("i40e: support double vlan stripping and insertion")
Cc: stable@dpdk.org
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
---
lib/librte_ethdev/rte_ethdev.c | 17 +++++++++++++++++
lib/librte_ethdev/rte_ethdev.h | 5 ++++-
2 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 243beb4..222df4e 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -2770,6 +2770,19 @@ rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask)
mask |= ETH_VLAN_EXTEND_MASK;
}
+ cur = !!(offload_mask & ETH_QINQ_STRIP_OFFLOAD);
+ org = !!(dev->data->dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_QINQ_STRIP);
+ if (cur != org) {
+ if (cur)
+ dev->data->dev_conf.rxmode.offloads |=
+ DEV_RX_OFFLOAD_QINQ_STRIP;
+ else
+ dev->data->dev_conf.rxmode.offloads &=
+ ~DEV_RX_OFFLOAD_QINQ_STRIP;
+ mask |= ETH_QINQ_STRIP_MASK;
+ }
+
/*no change*/
if (mask == 0)
return ret;
@@ -2805,6 +2818,10 @@ rte_eth_dev_get_vlan_offload(uint16_t port_id)
DEV_RX_OFFLOAD_VLAN_EXTEND)
ret |= ETH_VLAN_EXTEND_OFFLOAD;
+ if (dev->data->dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_QINQ_STRIP)
+ ret |= DEV_RX_OFFLOAD_QINQ_STRIP;
+
return ret;
}
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index 40a068f..c1792f4 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -550,11 +550,13 @@ struct rte_eth_rss_conf {
#define ETH_VLAN_STRIP_OFFLOAD 0x0001 /**< VLAN Strip On/Off */
#define ETH_VLAN_FILTER_OFFLOAD 0x0002 /**< VLAN Filter On/Off */
#define ETH_VLAN_EXTEND_OFFLOAD 0x0004 /**< VLAN Extend On/Off */
+#define ETH_QINQ_STRIP_OFFLOAD 0x0008 /**< QINQ Strip On/Off */
/* Definitions used for mask VLAN setting */
#define ETH_VLAN_STRIP_MASK 0x0001 /**< VLAN Strip setting mask */
#define ETH_VLAN_FILTER_MASK 0x0002 /**< VLAN Filter setting mask*/
#define ETH_VLAN_EXTEND_MASK 0x0004 /**< VLAN Extend setting mask*/
+#define ETH_QINQ_STRIP_MASK 0x0008 /**< QINQ Strip setting mask */
#define ETH_VLAN_ID_MAX 0x0FFF /**< VLAN ID is in lower 12 bits*/
/* Definitions used for receive MAC address */
@@ -965,7 +967,8 @@ struct rte_eth_conf {
DEV_RX_OFFLOAD_TCP_CKSUM)
#define DEV_RX_OFFLOAD_VLAN (DEV_RX_OFFLOAD_VLAN_STRIP | \
DEV_RX_OFFLOAD_VLAN_FILTER | \
- DEV_RX_OFFLOAD_VLAN_EXTEND)
+ DEV_RX_OFFLOAD_VLAN_EXTEND | \
+ DEV_RX_OFFLOAD_QINQ_STRIP)
/*
* If new Rx offload capabilities are defined, they also must be
--
2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
* [dpdk-dev] [PATCH] ethdev: fix QinQ strip offload support
2019-04-13 8:54 [dpdk-dev] [PATCH] ethdev: fix QinQ strip offload support Vivek Kumar Sharma
@ 2019-04-13 8:54 ` Vivek Kumar Sharma
0 siblings, 0 replies; 8+ messages in thread
From: Vivek Kumar Sharma @ 2019-04-13 8:54 UTC (permalink / raw)
To: dev; +Cc: thomas, ferruh.yigit, arybchenko, Vivek Kumar Sharma, stable
Enable missing support for QinQ strip rx offload
in vlan offload set/get methods.
Fixes: cc9d0456b870 ("i40e: support double vlan stripping and insertion")
Cc: stable@dpdk.org
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
---
lib/librte_ethdev/rte_ethdev.c | 17 +++++++++++++++++
lib/librte_ethdev/rte_ethdev.h | 5 ++++-
2 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 243beb4..222df4e 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -2770,6 +2770,19 @@ rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask)
mask |= ETH_VLAN_EXTEND_MASK;
}
+ cur = !!(offload_mask & ETH_QINQ_STRIP_OFFLOAD);
+ org = !!(dev->data->dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_QINQ_STRIP);
+ if (cur != org) {
+ if (cur)
+ dev->data->dev_conf.rxmode.offloads |=
+ DEV_RX_OFFLOAD_QINQ_STRIP;
+ else
+ dev->data->dev_conf.rxmode.offloads &=
+ ~DEV_RX_OFFLOAD_QINQ_STRIP;
+ mask |= ETH_QINQ_STRIP_MASK;
+ }
+
/*no change*/
if (mask == 0)
return ret;
@@ -2805,6 +2818,10 @@ rte_eth_dev_get_vlan_offload(uint16_t port_id)
DEV_RX_OFFLOAD_VLAN_EXTEND)
ret |= ETH_VLAN_EXTEND_OFFLOAD;
+ if (dev->data->dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_QINQ_STRIP)
+ ret |= DEV_RX_OFFLOAD_QINQ_STRIP;
+
return ret;
}
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index 40a068f..c1792f4 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -550,11 +550,13 @@ struct rte_eth_rss_conf {
#define ETH_VLAN_STRIP_OFFLOAD 0x0001 /**< VLAN Strip On/Off */
#define ETH_VLAN_FILTER_OFFLOAD 0x0002 /**< VLAN Filter On/Off */
#define ETH_VLAN_EXTEND_OFFLOAD 0x0004 /**< VLAN Extend On/Off */
+#define ETH_QINQ_STRIP_OFFLOAD 0x0008 /**< QINQ Strip On/Off */
/* Definitions used for mask VLAN setting */
#define ETH_VLAN_STRIP_MASK 0x0001 /**< VLAN Strip setting mask */
#define ETH_VLAN_FILTER_MASK 0x0002 /**< VLAN Filter setting mask*/
#define ETH_VLAN_EXTEND_MASK 0x0004 /**< VLAN Extend setting mask*/
+#define ETH_QINQ_STRIP_MASK 0x0008 /**< QINQ Strip setting mask */
#define ETH_VLAN_ID_MAX 0x0FFF /**< VLAN ID is in lower 12 bits*/
/* Definitions used for receive MAC address */
@@ -965,7 +967,8 @@ struct rte_eth_conf {
DEV_RX_OFFLOAD_TCP_CKSUM)
#define DEV_RX_OFFLOAD_VLAN (DEV_RX_OFFLOAD_VLAN_STRIP | \
DEV_RX_OFFLOAD_VLAN_FILTER | \
- DEV_RX_OFFLOAD_VLAN_EXTEND)
+ DEV_RX_OFFLOAD_VLAN_EXTEND | \
+ DEV_RX_OFFLOAD_QINQ_STRIP)
/*
* If new Rx offload capabilities are defined, they also must be
--
2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-dev] [PATCH] ethdev: fix QinQ strip offload support
2019-04-15 15:54 ` Stephen Hemminger
2019-04-15 15:54 ` Stephen Hemminger
@ 2019-04-15 21:33 ` Rami Rosen
2019-04-15 21:33 ` Rami Rosen
1 sibling, 1 reply; 8+ messages in thread
From: Rami Rosen @ 2019-04-15 21:33 UTC (permalink / raw)
To: Stephen Hemminger
Cc: viveksharma, dev, thomas, ferruh.yigit, arybchenko, stable
>Using a local (pointer) variable for dev->data->dev_conf.rxmode.offloads
>would make the code more readable and lines shorter.
+1
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-dev] [PATCH] ethdev: fix QinQ strip offload support
2019-04-15 21:33 ` Rami Rosen
@ 2019-04-15 21:33 ` Rami Rosen
0 siblings, 0 replies; 8+ messages in thread
From: Rami Rosen @ 2019-04-15 21:33 UTC (permalink / raw)
To: Stephen Hemminger
Cc: viveksharma, dev, thomas, ferruh.yigit, arybchenko, stable
>Using a local (pointer) variable for dev->data->dev_conf.rxmode.offloads
>would make the code more readable and lines shorter.
+1
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-dev] [PATCH] ethdev: fix QinQ strip offload support
2019-04-14 11:11 viveksharma
2019-04-14 11:11 ` viveksharma
@ 2019-04-15 15:54 ` Stephen Hemminger
2019-04-15 15:54 ` Stephen Hemminger
2019-04-15 21:33 ` Rami Rosen
1 sibling, 2 replies; 8+ messages in thread
From: Stephen Hemminger @ 2019-04-15 15:54 UTC (permalink / raw)
To: viveksharma; +Cc: dev, thomas, ferruh.yigit, arybchenko, stable
On Sun, 14 Apr 2019 16:41:42 +0530
<viveksharma@marvell.com> wrote:
>
> + cur = !!(offload_mask & ETH_QINQ_STRIP_OFFLOAD);
> + org = !!(dev->data->dev_conf.rxmode.offloads &
> + DEV_RX_OFFLOAD_QINQ_STRIP);
> + if (cur != org) {
> + if (cur)
> + dev->data->dev_conf.rxmode.offloads |=
> + DEV_RX_OFFLOAD_QINQ_STRIP;
> + else
> + dev->data->dev_conf.rxmode.offloads &=
> + ~DEV_RX_OFFLOAD_QINQ_STRIP;
> + mask |= ETH_QINQ_STRIP_MASK;
> + }
> +
> /*no change*/
Using a local (pointer) variable for dev->data->dev_conf.rxmode.offloads
would make the code more readable and lines shorter.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-dev] [PATCH] ethdev: fix QinQ strip offload support
2019-04-15 15:54 ` Stephen Hemminger
@ 2019-04-15 15:54 ` Stephen Hemminger
2019-04-15 21:33 ` Rami Rosen
1 sibling, 0 replies; 8+ messages in thread
From: Stephen Hemminger @ 2019-04-15 15:54 UTC (permalink / raw)
To: viveksharma; +Cc: dev, thomas, ferruh.yigit, arybchenko, stable
On Sun, 14 Apr 2019 16:41:42 +0530
<viveksharma@marvell.com> wrote:
>
> + cur = !!(offload_mask & ETH_QINQ_STRIP_OFFLOAD);
> + org = !!(dev->data->dev_conf.rxmode.offloads &
> + DEV_RX_OFFLOAD_QINQ_STRIP);
> + if (cur != org) {
> + if (cur)
> + dev->data->dev_conf.rxmode.offloads |=
> + DEV_RX_OFFLOAD_QINQ_STRIP;
> + else
> + dev->data->dev_conf.rxmode.offloads &=
> + ~DEV_RX_OFFLOAD_QINQ_STRIP;
> + mask |= ETH_QINQ_STRIP_MASK;
> + }
> +
> /*no change*/
Using a local (pointer) variable for dev->data->dev_conf.rxmode.offloads
would make the code more readable and lines shorter.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [dpdk-dev] [PATCH] ethdev: fix QinQ strip offload support
@ 2019-04-14 11:11 viveksharma
2019-04-14 11:11 ` viveksharma
2019-04-15 15:54 ` Stephen Hemminger
0 siblings, 2 replies; 8+ messages in thread
From: viveksharma @ 2019-04-14 11:11 UTC (permalink / raw)
To: dev; +Cc: thomas, ferruh.yigit, arybchenko, Vivek Sharma, stable
From: Vivek Sharma <viveksharma@marvell.com>
Enable missing support for QinQ strip rx offload
in vlan offload set/get methods.
Fixes: cc9d0456b870 ("i40e: support double vlan stripping and insertion")
Cc: stable@dpdk.org
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
---
lib/librte_ethdev/rte_ethdev.c | 17 +++++++++++++++++
lib/librte_ethdev/rte_ethdev.h | 5 ++++-
2 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 243beb4..222df4e 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -2770,6 +2770,19 @@ rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask)
mask |= ETH_VLAN_EXTEND_MASK;
}
+ cur = !!(offload_mask & ETH_QINQ_STRIP_OFFLOAD);
+ org = !!(dev->data->dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_QINQ_STRIP);
+ if (cur != org) {
+ if (cur)
+ dev->data->dev_conf.rxmode.offloads |=
+ DEV_RX_OFFLOAD_QINQ_STRIP;
+ else
+ dev->data->dev_conf.rxmode.offloads &=
+ ~DEV_RX_OFFLOAD_QINQ_STRIP;
+ mask |= ETH_QINQ_STRIP_MASK;
+ }
+
/*no change*/
if (mask == 0)
return ret;
@@ -2805,6 +2818,10 @@ rte_eth_dev_get_vlan_offload(uint16_t port_id)
DEV_RX_OFFLOAD_VLAN_EXTEND)
ret |= ETH_VLAN_EXTEND_OFFLOAD;
+ if (dev->data->dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_QINQ_STRIP)
+ ret |= DEV_RX_OFFLOAD_QINQ_STRIP;
+
return ret;
}
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index 40a068f..c1792f4 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -550,11 +550,13 @@ struct rte_eth_rss_conf {
#define ETH_VLAN_STRIP_OFFLOAD 0x0001 /**< VLAN Strip On/Off */
#define ETH_VLAN_FILTER_OFFLOAD 0x0002 /**< VLAN Filter On/Off */
#define ETH_VLAN_EXTEND_OFFLOAD 0x0004 /**< VLAN Extend On/Off */
+#define ETH_QINQ_STRIP_OFFLOAD 0x0008 /**< QINQ Strip On/Off */
/* Definitions used for mask VLAN setting */
#define ETH_VLAN_STRIP_MASK 0x0001 /**< VLAN Strip setting mask */
#define ETH_VLAN_FILTER_MASK 0x0002 /**< VLAN Filter setting mask*/
#define ETH_VLAN_EXTEND_MASK 0x0004 /**< VLAN Extend setting mask*/
+#define ETH_QINQ_STRIP_MASK 0x0008 /**< QINQ Strip setting mask */
#define ETH_VLAN_ID_MAX 0x0FFF /**< VLAN ID is in lower 12 bits*/
/* Definitions used for receive MAC address */
@@ -965,7 +967,8 @@ struct rte_eth_conf {
DEV_RX_OFFLOAD_TCP_CKSUM)
#define DEV_RX_OFFLOAD_VLAN (DEV_RX_OFFLOAD_VLAN_STRIP | \
DEV_RX_OFFLOAD_VLAN_FILTER | \
- DEV_RX_OFFLOAD_VLAN_EXTEND)
+ DEV_RX_OFFLOAD_VLAN_EXTEND | \
+ DEV_RX_OFFLOAD_QINQ_STRIP)
/*
* If new Rx offload capabilities are defined, they also must be
--
2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
* [dpdk-dev] [PATCH] ethdev: fix QinQ strip offload support
2019-04-14 11:11 viveksharma
@ 2019-04-14 11:11 ` viveksharma
2019-04-15 15:54 ` Stephen Hemminger
1 sibling, 0 replies; 8+ messages in thread
From: viveksharma @ 2019-04-14 11:11 UTC (permalink / raw)
To: dev; +Cc: thomas, ferruh.yigit, arybchenko, Vivek Sharma, stable
From: Vivek Sharma <viveksharma@marvell.com>
Enable missing support for QinQ strip rx offload
in vlan offload set/get methods.
Fixes: cc9d0456b870 ("i40e: support double vlan stripping and insertion")
Cc: stable@dpdk.org
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
---
lib/librte_ethdev/rte_ethdev.c | 17 +++++++++++++++++
lib/librte_ethdev/rte_ethdev.h | 5 ++++-
2 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 243beb4..222df4e 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -2770,6 +2770,19 @@ rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask)
mask |= ETH_VLAN_EXTEND_MASK;
}
+ cur = !!(offload_mask & ETH_QINQ_STRIP_OFFLOAD);
+ org = !!(dev->data->dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_QINQ_STRIP);
+ if (cur != org) {
+ if (cur)
+ dev->data->dev_conf.rxmode.offloads |=
+ DEV_RX_OFFLOAD_QINQ_STRIP;
+ else
+ dev->data->dev_conf.rxmode.offloads &=
+ ~DEV_RX_OFFLOAD_QINQ_STRIP;
+ mask |= ETH_QINQ_STRIP_MASK;
+ }
+
/*no change*/
if (mask == 0)
return ret;
@@ -2805,6 +2818,10 @@ rte_eth_dev_get_vlan_offload(uint16_t port_id)
DEV_RX_OFFLOAD_VLAN_EXTEND)
ret |= ETH_VLAN_EXTEND_OFFLOAD;
+ if (dev->data->dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_QINQ_STRIP)
+ ret |= DEV_RX_OFFLOAD_QINQ_STRIP;
+
return ret;
}
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index 40a068f..c1792f4 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -550,11 +550,13 @@ struct rte_eth_rss_conf {
#define ETH_VLAN_STRIP_OFFLOAD 0x0001 /**< VLAN Strip On/Off */
#define ETH_VLAN_FILTER_OFFLOAD 0x0002 /**< VLAN Filter On/Off */
#define ETH_VLAN_EXTEND_OFFLOAD 0x0004 /**< VLAN Extend On/Off */
+#define ETH_QINQ_STRIP_OFFLOAD 0x0008 /**< QINQ Strip On/Off */
/* Definitions used for mask VLAN setting */
#define ETH_VLAN_STRIP_MASK 0x0001 /**< VLAN Strip setting mask */
#define ETH_VLAN_FILTER_MASK 0x0002 /**< VLAN Filter setting mask*/
#define ETH_VLAN_EXTEND_MASK 0x0004 /**< VLAN Extend setting mask*/
+#define ETH_QINQ_STRIP_MASK 0x0008 /**< QINQ Strip setting mask */
#define ETH_VLAN_ID_MAX 0x0FFF /**< VLAN ID is in lower 12 bits*/
/* Definitions used for receive MAC address */
@@ -965,7 +967,8 @@ struct rte_eth_conf {
DEV_RX_OFFLOAD_TCP_CKSUM)
#define DEV_RX_OFFLOAD_VLAN (DEV_RX_OFFLOAD_VLAN_STRIP | \
DEV_RX_OFFLOAD_VLAN_FILTER | \
- DEV_RX_OFFLOAD_VLAN_EXTEND)
+ DEV_RX_OFFLOAD_VLAN_EXTEND | \
+ DEV_RX_OFFLOAD_QINQ_STRIP)
/*
* If new Rx offload capabilities are defined, they also must be
--
2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-04-15 21:33 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-13 8:54 [dpdk-dev] [PATCH] ethdev: fix QinQ strip offload support Vivek Kumar Sharma
2019-04-13 8:54 ` Vivek Kumar Sharma
2019-04-14 11:11 viveksharma
2019-04-14 11:11 ` viveksharma
2019-04-15 15:54 ` Stephen Hemminger
2019-04-15 15:54 ` Stephen Hemminger
2019-04-15 21:33 ` Rami Rosen
2019-04-15 21:33 ` Rami Rosen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).