DPDK patches and discussions
 help / color / mirror / Atom feed
From: Haiyue Wang <haiyue.wang@intel.com>
To: dev@dpdk.org, qi.z.zhang@intel.com, wenzhuo.lu@intel.com
Cc: Haiyue Wang <haiyue.wang@intel.com>
Subject: [dpdk-dev] [PATCH v1] net/ice: add link-up and link-down functions
Date: Tue, 30 Apr 2019 15:11:59 +0800	[thread overview]
Message-ID: <1556608319-5135-1-git-send-email-haiyue.wang@intel.com> (raw)

Support link up and down functions for ice, and when stop the ice,
makes the link down also.

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
---
 drivers/net/ice/ice_ethdev.c | 83 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 83 insertions(+)

diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index 1f06a2c..8f58150 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -32,6 +32,9 @@ static void ice_dev_info_get(struct rte_eth_dev *dev,
 			     struct rte_eth_dev_info *dev_info);
 static int ice_link_update(struct rte_eth_dev *dev,
 			   int wait_to_complete);
+static int ice_dev_set_link_up(struct rte_eth_dev *dev);
+static int ice_dev_set_link_down(struct rte_eth_dev *dev);
+
 static int ice_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
 static int ice_vlan_offload_set(struct rte_eth_dev *dev, int mask);
 static int ice_vlan_tpid_set(struct rte_eth_dev *dev,
@@ -94,6 +97,8 @@ static const struct eth_dev_ops ice_eth_dev_ops = {
 	.dev_stop                     = ice_dev_stop,
 	.dev_close                    = ice_dev_close,
 	.dev_reset                    = ice_dev_reset,
+	.dev_set_link_up              = ice_dev_set_link_up,
+	.dev_set_link_down            = ice_dev_set_link_down,
 	.rx_queue_start               = ice_rx_queue_start,
 	.rx_queue_stop                = ice_rx_queue_stop,
 	.tx_queue_start               = ice_tx_queue_start,
@@ -1541,6 +1546,9 @@ ice_dev_stop(struct rte_eth_dev *dev)
 	/* Clear all queues and release mbufs */
 	ice_clear_queues(dev);
 
+	/* Set link down */
+	ice_dev_set_link_down(dev);
+
 	/* Clean datapath event and queue/vec mapping */
 	rte_intr_efd_disable(intr_handle);
 	if (intr_handle->intr_vec) {
@@ -1562,10 +1570,14 @@ ice_dev_close(struct rte_eth_dev *dev)
 	/* release all queue resource */
 	ice_free_queues(dev);
 
+	/* Disable interrupt */
+	ice_pf_disable_irq0(hw);
+
 	ice_res_pool_destroy(&pf->msix_pool);
 	ice_release_vsi(pf->main_vsi);
 	ice_sched_cleanup_all(hw);
 	rte_free(hw->port_info);
+	hw->port_info = NULL;
 	ice_shutdown_all_ctrlq(hw);
 }
 
@@ -1936,6 +1948,9 @@ ice_dev_start(struct rte_eth_dev *dev)
 	if (ret != ICE_SUCCESS)
 		PMD_DRV_LOG(WARNING, "Fail to set phy mask");
 
+	/* Set link up */
+	ice_dev_set_link_up(dev);
+
 	/* Call get_link_info aq commond to enable/disable LSE */
 	ice_link_update(dev, 0);
 
@@ -2218,6 +2233,74 @@ ice_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complete)
 	return 0;
 }
 
+/* Force the physical link state by getting the current PHY capabilities from
+ * hardware and setting the PHY config based on the determined capabilities. If
+ * link changes, link event will be triggered because both the Enable Automatic
+ * Link Update and LESM Enable bits are set when setting the PHY capabilities.
+ */
+static enum ice_status
+ice_force_phys_link_state(struct ice_hw *hw, bool link_up)
+{
+	struct ice_aqc_set_phy_cfg_data cfg = { 0 };
+	struct ice_aqc_get_phy_caps_data *pcaps;
+	struct ice_port_info *pi;
+	enum ice_status status;
+
+	if (!hw || !hw->port_info)
+		return ICE_ERR_PARAM;
+
+	pi = hw->port_info;
+
+	pcaps = (struct ice_aqc_get_phy_caps_data *)
+		ice_malloc(hw, sizeof(*pcaps));
+	if (!pcaps)
+		return ICE_ERR_NO_MEMORY;
+
+	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_SW_CFG, pcaps,
+				     NULL);
+	if (status)
+		goto out;
+
+	/* No change in link */
+	if (link_up == !!(pcaps->caps & ICE_AQC_PHY_EN_LINK) &&
+	    link_up == !!(pi->phy.link_info.link_info & ICE_AQ_LINK_UP))
+		goto out;
+
+	cfg.phy_type_low = pcaps->phy_type_low;
+	cfg.phy_type_high = pcaps->phy_type_high;
+	cfg.caps = pcaps->caps | ICE_AQ_PHY_ENA_AUTO_LINK_UPDT;
+	cfg.low_power_ctrl = pcaps->low_power_ctrl;
+	cfg.eee_cap = pcaps->eee_cap;
+	cfg.eeer_value = pcaps->eeer_value;
+	cfg.link_fec_opt = pcaps->link_fec_options;
+	if (link_up)
+		cfg.caps |= ICE_AQ_PHY_ENA_LINK;
+	else
+		cfg.caps &= ~ICE_AQ_PHY_ENA_LINK;
+
+	status = ice_aq_set_phy_cfg(hw, pi->lport, &cfg, NULL);
+
+out:
+	ice_free(hw, pcaps);
+	return status;
+}
+
+static int
+ice_dev_set_link_up(struct rte_eth_dev *dev)
+{
+	struct ice_hw *hw = ICE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+	return ice_force_phys_link_state(hw, true);
+}
+
+static int
+ice_dev_set_link_down(struct rte_eth_dev *dev)
+{
+	struct ice_hw *hw = ICE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+	return ice_force_phys_link_state(hw, false);
+}
+
 static int
 ice_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 {
-- 
2.7.4

             reply	other threads:[~2019-04-30  7:17 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-30  7:11 Haiyue Wang [this message]
2019-04-30  7:11 ` Haiyue Wang
2019-04-30 16:23 ` Stillwell Jr, Paul M
2019-04-30 16:23   ` Stillwell Jr, Paul M
2019-04-30 17:19   ` Wang, Haiyue
2019-04-30 17:19     ` Wang, Haiyue
2019-04-30 18:43     ` Stillwell Jr, Paul M
2019-04-30 18:43       ` Stillwell Jr, Paul M
2019-05-01  1:08 ` Zhang, Qi Z
2019-05-01  1:08   ` Zhang, Qi Z
2019-05-03  3:30   ` Wang, Haiyue
2019-05-03  3:30     ` Wang, Haiyue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1556608319-5135-1-git-send-email-haiyue.wang@intel.com \
    --to=haiyue.wang@intel.com \
    --cc=dev@dpdk.org \
    --cc=qi.z.zhang@intel.com \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).