From: Lukasz Bartosik <lbartosik@marvell.com>
To: <konstantin.ananyev@intel.com>
Cc: <dev@dpdk.org>, <anoobj@marvell.com>,
Lukasz Bartosik <lbartosik@marvell.com>
Subject: [dpdk-dev] [PATCH] ipsec: include high order bytes of esn in pkt len
Date: Tue, 30 Apr 2019 16:55:55 +0200 [thread overview]
Message-ID: <1556636155-26299-1-git-send-email-lbartosik@marvell.com> (raw)
When esn is used then high-order 32 bits are included in ICV
calculation however are not transmitted. Update packet length
to be consistent with auth data offset and length before crypto
operation. High-order 32 bits of esn will be removed from packet
length in crypto post processing.
Change-Id: I5ba50e341059a8d6a5e4ce7c626dfe7b9173740b
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
---
lib/librte_ipsec/esp_inb.c | 56 +++++++++++++++++++++++++++++++++++++--------
lib/librte_ipsec/esp_outb.c | 31 +++++++++++++++++++++++++
lib/librte_ipsec/sa.c | 4 ++--
lib/librte_ipsec/sa.h | 8 +++++++
4 files changed, 87 insertions(+), 12 deletions(-)
diff --git a/lib/librte_ipsec/esp_inb.c b/lib/librte_ipsec/esp_inb.c
index 4e0e12a..eb899e3 100644
--- a/lib/librte_ipsec/esp_inb.c
+++ b/lib/librte_ipsec/esp_inb.c
@@ -16,7 +16,8 @@
#include "pad.h"
typedef uint16_t (*esp_inb_process_t)(const struct rte_ipsec_sa *sa,
- struct rte_mbuf *mb[], uint32_t sqn[], uint32_t dr[], uint16_t num);
+ struct rte_mbuf *mb[], uint32_t sqn[], uint32_t dr[], uint16_t num,
+ uint8_t is_inline);
/*
* helper function to fill crypto_sym op for cipher+auth algorithms.
@@ -181,6 +182,15 @@ inb_pkt_prepare(const struct rte_ipsec_sa *sa, const struct replay_sqn *rsn,
icv->va = rte_pktmbuf_mtod_offset(ml, void *, icv_ofs);
icv->pa = rte_pktmbuf_iova_offset(ml, icv_ofs);
+ /*
+ * if esn is used then high-order 32 bits are also used in ICV
+ * calculation but are not transmitted, update packet length
+ * to be consistent with auth data length and offset, this will
+ * be subtracted from packet length in post crypto processing
+ */
+ mb->pkt_len += sa->sqh_len;
+ ml->data_len += sa->sqh_len;
+
inb_pkt_xprepare(sa, sqn, icv);
return plen;
}
@@ -373,14 +383,20 @@ tun_process_step3(struct rte_mbuf *mb, uint64_t txof_msk, uint64_t txof_val)
*/
static inline uint16_t
tun_process(const struct rte_ipsec_sa *sa, struct rte_mbuf *mb[],
- uint32_t sqn[], uint32_t dr[], uint16_t num)
+ uint32_t sqn[], uint32_t dr[], uint16_t num, uint8_t is_inline)
{
uint32_t adj, i, k, tl;
uint32_t hl[num];
struct esp_tail espt[num];
struct rte_mbuf *ml[num];
- const uint32_t tlen = sa->icv_len + sizeof(espt[0]);
+ /*
+ * remove high-order 32 bits of esn from packet length
+ * which was added before crypto processing, this doesn't
+ * apply to inline case
+ */
+ const uint32_t tlen = sa->icv_len + sizeof(espt[0]) +
+ (is_inline ? 0 : sa->sqh_len);
const uint32_t cofs = sa->ctp.cipher.offset;
/*
@@ -420,7 +436,7 @@ tun_process(const struct rte_ipsec_sa *sa, struct rte_mbuf *mb[],
*/
static inline uint16_t
trs_process(const struct rte_ipsec_sa *sa, struct rte_mbuf *mb[],
- uint32_t sqn[], uint32_t dr[], uint16_t num)
+ uint32_t sqn[], uint32_t dr[], uint16_t num, uint8_t is_inline)
{
char *np;
uint32_t i, k, l2, tl;
@@ -428,7 +444,13 @@ trs_process(const struct rte_ipsec_sa *sa, struct rte_mbuf *mb[],
struct esp_tail espt[num];
struct rte_mbuf *ml[num];
- const uint32_t tlen = sa->icv_len + sizeof(espt[0]);
+ /*
+ * remove high-order 32 bits of esn from packet length
+ * which was added before crypto processing, this doesn't
+ * apply to inline case
+ */
+ const uint32_t tlen = sa->icv_len + sizeof(espt[0]) +
+ (is_inline ? 0 : sa->sqh_len);
const uint32_t cofs = sa->ctp.cipher.offset;
/*
@@ -496,8 +518,8 @@ esp_inb_rsn_update(struct rte_ipsec_sa *sa, const uint32_t sqn[],
* process group of ESP inbound packets.
*/
static inline uint16_t
-esp_inb_pkt_process(const struct rte_ipsec_session *ss,
- struct rte_mbuf *mb[], uint16_t num, esp_inb_process_t process)
+esp_inb_pkt_process(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
+ uint16_t num, uint8_t is_inline, esp_inb_process_t process)
{
uint32_t k, n;
struct rte_ipsec_sa *sa;
@@ -507,7 +529,7 @@ esp_inb_pkt_process(const struct rte_ipsec_session *ss,
sa = ss->sa;
/* process packets, extract seq numbers */
- k = process(sa, mb, sqn, dr, num);
+ k = process(sa, mb, sqn, dr, num, is_inline);
/* handle unprocessed mbufs */
if (k != num && k != 0)
@@ -533,7 +555,14 @@ uint16_t
esp_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
struct rte_mbuf *mb[], uint16_t num)
{
- return esp_inb_pkt_process(ss, mb, num, tun_process);
+ return esp_inb_pkt_process(ss, mb, num, 0, tun_process);
+}
+
+uint16_t
+inline_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
+ struct rte_mbuf *mb[], uint16_t num)
+{
+ return esp_inb_pkt_process(ss, mb, num, 1, tun_process);
}
/*
@@ -543,5 +572,12 @@ uint16_t
esp_inb_trs_pkt_process(const struct rte_ipsec_session *ss,
struct rte_mbuf *mb[], uint16_t num)
{
- return esp_inb_pkt_process(ss, mb, num, trs_process);
+ return esp_inb_pkt_process(ss, mb, num, 0, trs_process);
+}
+
+uint16_t
+inline_inb_trs_pkt_process(const struct rte_ipsec_session *ss,
+ struct rte_mbuf *mb[], uint16_t num)
+{
+ return esp_inb_pkt_process(ss, mb, num, 1, trs_process);
}
diff --git a/lib/librte_ipsec/esp_outb.c b/lib/librte_ipsec/esp_outb.c
index c798bc4..71a595e 100644
--- a/lib/librte_ipsec/esp_outb.c
+++ b/lib/librte_ipsec/esp_outb.c
@@ -221,6 +221,7 @@ esp_outb_tun_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
uint32_t i, k, n;
uint64_t sqn;
rte_be64_t sqc;
+ struct rte_mbuf *ml;
struct rte_ipsec_sa *sa;
struct rte_cryptodev_sym_session *cs;
union sym_op_data icv;
@@ -246,6 +247,19 @@ esp_outb_tun_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
/* success, setup crypto op */
if (rc >= 0) {
+ /*
+ * if esn is used then high-order 32 bits are also
+ * used in ICV calculation but are not transmitted,
+ * update packet length to be consistent with auth
+ * data length and offset, this will be subtracted
+ * from packet length in post crypto processing
+ */
+ if (sa->sqh_len) {
+ mb[i]->pkt_len += sa->sqh_len;
+ ml = rte_pktmbuf_lastseg(mb[i]);
+ ml->data_len += sa->sqh_len;
+ }
+
outb_pkt_xprepare(sa, sqc, &icv);
lksd_none_cop_prepare(cop[k], cs, mb[i]);
outb_cop_prepare(cop[k], sa, iv, &icv, 0, rc);
@@ -356,6 +370,7 @@ esp_outb_trs_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
uint32_t i, k, n, l2, l3;
uint64_t sqn;
rte_be64_t sqc;
+ struct rte_mbuf *ml;
struct rte_ipsec_sa *sa;
struct rte_cryptodev_sym_session *cs;
union sym_op_data icv;
@@ -384,6 +399,19 @@ esp_outb_trs_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
/* success, setup crypto op */
if (rc >= 0) {
+ /*
+ * if esn is used then high-order 32 bits are also
+ * used in ICV calculation but are not transmitted,
+ * update packet length to be consistent with auth
+ * data length and offset, this will be subtracted
+ * from packet length in post crypto processing
+ */
+ if (sa->sqh_len) {
+ mb[i]->pkt_len += sa->sqh_len;
+ ml = rte_pktmbuf_lastseg(mb[i]);
+ ml->data_len += sa->sqh_len;
+ }
+
outb_pkt_xprepare(sa, sqc, &icv);
lksd_none_cop_prepare(cop[k], cs, mb[i]);
outb_cop_prepare(cop[k], sa, iv, &icv, l2 + l3, rc);
@@ -425,6 +453,9 @@ esp_outb_sqh_process(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
for (i = 0; i != num; i++) {
if ((mb[i]->ol_flags & PKT_RX_SEC_OFFLOAD_FAILED) == 0) {
ml = rte_pktmbuf_lastseg(mb[i]);
+ /* remove high-order 32 bits of esn from packet len */
+ mb[i]->pkt_len -= sa->sqh_len;
+ ml->data_len -= sa->sqh_len;
icv = rte_pktmbuf_mtod_offset(ml, void *,
ml->data_len - icv_len);
remove_sqh(icv, icv_len);
diff --git a/lib/librte_ipsec/sa.c b/lib/librte_ipsec/sa.c
index 846e317..ff01358 100644
--- a/lib/librte_ipsec/sa.c
+++ b/lib/librte_ipsec/sa.c
@@ -610,10 +610,10 @@ inline_crypto_pkt_func_select(const struct rte_ipsec_sa *sa,
switch (sa->type & msk) {
case (RTE_IPSEC_SATP_DIR_IB | RTE_IPSEC_SATP_MODE_TUNLV4):
case (RTE_IPSEC_SATP_DIR_IB | RTE_IPSEC_SATP_MODE_TUNLV6):
- pf->process = esp_inb_tun_pkt_process;
+ pf->process = inline_inb_tun_pkt_process;
break;
case (RTE_IPSEC_SATP_DIR_IB | RTE_IPSEC_SATP_MODE_TRANS):
- pf->process = esp_inb_trs_pkt_process;
+ pf->process = inline_inb_trs_pkt_process;
break;
case (RTE_IPSEC_SATP_DIR_OB | RTE_IPSEC_SATP_MODE_TUNLV4):
case (RTE_IPSEC_SATP_DIR_OB | RTE_IPSEC_SATP_MODE_TUNLV6):
diff --git a/lib/librte_ipsec/sa.h b/lib/librte_ipsec/sa.h
index ffb5fb4..20c0a65 100644
--- a/lib/librte_ipsec/sa.h
+++ b/lib/librte_ipsec/sa.h
@@ -143,9 +143,17 @@ esp_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
struct rte_mbuf *mb[], uint16_t num);
uint16_t
+inline_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
+ struct rte_mbuf *mb[], uint16_t num);
+
+uint16_t
esp_inb_trs_pkt_process(const struct rte_ipsec_session *ss,
struct rte_mbuf *mb[], uint16_t num);
+uint16_t
+inline_inb_trs_pkt_process(const struct rte_ipsec_session *ss,
+ struct rte_mbuf *mb[], uint16_t num);
+
/* outbound processing */
uint16_t
--
2.7.4
next reply other threads:[~2019-04-30 14:56 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-30 14:55 Lukasz Bartosik [this message]
2019-04-30 14:55 ` Lukasz Bartosik
2019-04-30 15:05 ` Ananyev, Konstantin
2019-04-30 15:05 ` Ananyev, Konstantin
2019-04-30 15:38 ` Lukas Bartosik
2019-04-30 15:38 ` Lukas Bartosik
2019-05-07 14:48 ` [dpdk-dev] [EXT] " Lukas Bartosik
2019-05-07 14:48 ` Lukas Bartosik
2019-05-09 11:59 ` Ananyev, Konstantin
2019-05-09 11:59 ` Ananyev, Konstantin
2019-05-14 13:52 ` Ananyev, Konstantin
2019-05-14 13:52 ` Ananyev, Konstantin
2019-05-14 14:31 ` Lukas Bartosik
2019-05-14 14:31 ` Lukas Bartosik
2019-05-19 14:47 ` [dpdk-dev] " Ananyev, Konstantin
2019-05-20 11:13 ` Lukas Bartosik
2019-05-23 12:11 ` [dpdk-dev] [PATCH v2] " Lukasz Bartosik
2019-05-30 16:51 ` Ananyev, Konstantin
2019-05-31 16:09 ` Lukas Bartosik
2019-06-05 15:31 ` [dpdk-dev] [PATCH v3] " Lukasz Bartosik
2019-06-06 14:45 ` Ananyev, Konstantin
2019-06-20 13:25 ` Akhil Goyal
2019-06-25 12:49 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1556636155-26299-1-git-send-email-lbartosik@marvell.com \
--to=lbartosik@marvell.com \
--cc=anoobj@marvell.com \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).