From: Anoob Joseph <anoobj@marvell.com>
To: Jerin Jacob <jerinj@marvell.com>,
Nikhil Rao <nikhil.rao@intel.com>,
"Erik Gabriel Carrillo" <erik.g.carrillo@intel.com>,
Abhinandan Gujjar <abhinandan.gujjar@intel.com>,
Bruce Richardson <bruce.richardson@intel.com>,
Pablo de Lara <pablo.de.lara.guarch@intel.com>
Cc: "Anoob Joseph" <anoobj@marvell.com>,
"Narayana Prasad" <pathreya@marvell.com>,
dev@dpdk.org, "Lukasz Bartosik" <lbartosik@marvell.com>,
"Pavan Nikhilesh" <pbhagavatula@marvell.com>,
"Hemant Agrawal" <hemant.agrawal@nxp.com>,
"Nipun Gupta" <nipun.gupta@nxp.com>,
"Harry van Haaren" <harry.van.haaren@intel.com>,
"Mattias Rönnblom" <mattias.ronnblom@ericsson.com>,
"Liang Ma" <liang.j.ma@intel.com>
Subject: [dpdk-dev] [PATCH 01/39] examples/l2fwd-event: create copy of l2fwd
Date: Mon, 3 Jun 2019 23:02:01 +0530 [thread overview]
Message-ID: <1559583160-13944-2-git-send-email-anoobj@marvell.com> (raw)
In-Reply-To: <1559583160-13944-1-git-send-email-anoobj@marvell.com>
Creating a copy of l2fwd for event additions.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
---
examples/Makefile | 1 +
examples/l2fwd-event/Makefile | 55 +++
examples/l2fwd-event/main.c | 752 +++++++++++++++++++++++++++++++++++++++
examples/l2fwd-event/meson.build | 11 +
4 files changed, 819 insertions(+)
create mode 100644 examples/l2fwd-event/Makefile
create mode 100644 examples/l2fwd-event/main.c
create mode 100644 examples/l2fwd-event/meson.build
diff --git a/examples/Makefile b/examples/Makefile
index 7562424..aa718ef 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -38,6 +38,7 @@ ifneq ($(PQOS_INSTALL_PATH),)
DIRS-y += l2fwd-cat
endif
DIRS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += l2fwd-crypto
+DIRS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += l2fwd-event
DIRS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += l2fwd-jobstats
DIRS-y += l2fwd-keepalive
DIRS-y += l2fwd-keepalive/ka-agent
diff --git a/examples/l2fwd-event/Makefile b/examples/l2fwd-event/Makefile
new file mode 100644
index 0000000..398f7a1
--- /dev/null
+++ b/examples/l2fwd-event/Makefile
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2014 Intel Corporation
+
+# binary name
+APP = l2fwd-event
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+# Build using pkg-config variables if possible
+$(shell pkg-config --exists libdpdk)
+ifeq ($(.SHELLSTATUS),0)
+
+all: shared
+.PHONY: shared static
+shared: build/$(APP)-shared
+ ln -sf $(APP)-shared build/$(APP)
+static: build/$(APP)-static
+ ln -sf $(APP)-static build/$(APP)
+
+PC_FILE := $(shell pkg-config --path libdpdk)
+CFLAGS += -O3 $(shell pkg-config --cflags libdpdk)
+LDFLAGS_SHARED = $(shell pkg-config --libs libdpdk)
+LDFLAGS_STATIC = -Wl,-Bstatic $(shell pkg-config --static --libs libdpdk)
+
+build/$(APP)-shared: $(SRCS-y) Makefile $(PC_FILE) | build
+ $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_SHARED)
+
+build/$(APP)-static: $(SRCS-y) Makefile $(PC_FILE) | build
+ $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_STATIC)
+
+build:
+ @mkdir -p $@
+
+.PHONY: clean
+clean:
+ rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
+ rmdir --ignore-fail-on-non-empty build
+
+else # Build using legacy build system
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overridden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+include $(RTE_SDK)/mk/rte.extapp.mk
+endif
diff --git a/examples/l2fwd-event/main.c b/examples/l2fwd-event/main.c
new file mode 100644
index 0000000..ef51dea
--- /dev/null
+++ b/examples/l2fwd-event/main.c
@@ -0,0 +1,752 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2016 Intel Corporation
+ * Copyright (C) 2019 Marvell International Ltd.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <sys/types.h>
+#include <sys/queue.h>
+#include <netinet/in.h>
+#include <setjmp.h>
+#include <stdarg.h>
+#include <ctype.h>
+#include <errno.h>
+#include <getopt.h>
+#include <signal.h>
+#include <stdbool.h>
+
+#include <rte_common.h>
+#include <rte_log.h>
+#include <rte_malloc.h>
+#include <rte_memory.h>
+#include <rte_memcpy.h>
+#include <rte_eal.h>
+#include <rte_launch.h>
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+#include <rte_prefetch.h>
+#include <rte_lcore.h>
+#include <rte_per_lcore.h>
+#include <rte_branch_prediction.h>
+#include <rte_interrupts.h>
+#include <rte_random.h>
+#include <rte_debug.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+
+static volatile bool force_quit;
+
+/* MAC updating enabled by default */
+static int mac_updating = 1;
+
+#define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
+
+#define MAX_PKT_BURST 32
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
+#define MEMPOOL_CACHE_SIZE 256
+
+/*
+ * Configurable number of RX/TX ring descriptors
+ */
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 1024
+static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
+static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
+
+/* ethernet addresses of ports */
+static struct rte_ether_addr l2fwd_ports_eth_addr[RTE_MAX_ETHPORTS];
+
+/* mask of enabled ports */
+static uint32_t l2fwd_enabled_port_mask;
+
+/* list of enabled ports */
+static uint32_t l2fwd_dst_ports[RTE_MAX_ETHPORTS];
+
+static unsigned int l2fwd_rx_queue_per_lcore = 1;
+
+#define MAX_RX_QUEUE_PER_LCORE 16
+#define MAX_TX_QUEUE_PER_PORT 16
+struct lcore_queue_conf {
+ unsigned int n_rx_port;
+ unsigned int rx_port_list[MAX_RX_QUEUE_PER_LCORE];
+} __rte_cache_aligned;
+struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
+
+static struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
+
+static struct rte_eth_conf port_conf = {
+ .rxmode = {
+ .split_hdr_size = 0,
+ },
+ .txmode = {
+ .mq_mode = ETH_MQ_TX_NONE,
+ },
+};
+
+struct rte_mempool *l2fwd_pktmbuf_pool;
+
+/* Per-port statistics struct */
+struct l2fwd_port_statistics {
+ uint64_t tx;
+ uint64_t rx;
+ uint64_t dropped;
+} __rte_cache_aligned;
+struct l2fwd_port_statistics port_statistics[RTE_MAX_ETHPORTS];
+
+#define MAX_TIMER_PERIOD 86400 /* 1 day max */
+/* A tsc-based timer responsible for triggering statistics printout */
+static uint64_t timer_period = 10; /* default period is 10 seconds */
+
+/* Print out statistics on packets dropped */
+static void
+print_stats(void)
+{
+ uint64_t total_packets_dropped, total_packets_tx, total_packets_rx;
+ unsigned int portid;
+
+ total_packets_dropped = 0;
+ total_packets_tx = 0;
+ total_packets_rx = 0;
+
+ const char clr[] = { 27, '[', '2', 'J', '\0' };
+ const char topLeft[] = { 27, '[', '1', ';', '1', 'H', '\0' };
+
+ /* Clear screen and move to top left */
+ printf("%s%s", clr, topLeft);
+
+ printf("\nPort statistics ====================================");
+
+ for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
+ /* skip disabled ports */
+ if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
+ continue;
+ printf("\nStatistics for port %u ------------------------------"
+ "\nPackets sent: %24"PRIu64
+ "\nPackets received: %20"PRIu64
+ "\nPackets dropped: %21"PRIu64,
+ portid,
+ port_statistics[portid].tx,
+ port_statistics[portid].rx,
+ port_statistics[portid].dropped);
+
+ total_packets_dropped += port_statistics[portid].dropped;
+ total_packets_tx += port_statistics[portid].tx;
+ total_packets_rx += port_statistics[portid].rx;
+ }
+ printf("\nAggregate statistics ==============================="
+ "\nTotal packets sent: %18"PRIu64
+ "\nTotal packets received: %14"PRIu64
+ "\nTotal packets dropped: %15"PRIu64,
+ total_packets_tx,
+ total_packets_rx,
+ total_packets_dropped);
+ printf("\n====================================================\n");
+}
+
+static void
+l2fwd_mac_updating(struct rte_mbuf *m, unsigned int dest_portid)
+{
+ struct rte_ether_hdr *eth;
+ void *tmp;
+
+ eth = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
+
+ /* 02:00:00:00:00:xx */
+ tmp = ð->d_addr.addr_bytes[0];
+ *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dest_portid << 40);
+
+ /* src addr */
+ rte_ether_addr_copy(&l2fwd_ports_eth_addr[dest_portid], ð->s_addr);
+}
+
+static void
+l2fwd_simple_forward(struct rte_mbuf *m, unsigned int portid)
+{
+ unsigned int dst_port;
+ int sent;
+ struct rte_eth_dev_tx_buffer *buffer;
+
+ dst_port = l2fwd_dst_ports[portid];
+
+ if (mac_updating)
+ l2fwd_mac_updating(m, dst_port);
+
+ buffer = tx_buffer[dst_port];
+ sent = rte_eth_tx_buffer(dst_port, 0, buffer, m);
+ if (sent)
+ port_statistics[dst_port].tx += sent;
+}
+
+/* main processing loop */
+static void
+l2fwd_main_loop(void)
+{
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct rte_mbuf *m;
+ int sent;
+ unsigned int lcore_id;
+ uint64_t prev_tsc, diff_tsc, cur_tsc, timer_tsc;
+ unsigned int i, j, portid, nb_rx;
+ struct lcore_queue_conf *qconf;
+ const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1)
+ / US_PER_S * BURST_TX_DRAIN_US;
+ struct rte_eth_dev_tx_buffer *buffer;
+
+ prev_tsc = 0;
+ timer_tsc = 0;
+
+ lcore_id = rte_lcore_id();
+ qconf = &lcore_queue_conf[lcore_id];
+
+ if (qconf->n_rx_port == 0) {
+ RTE_LOG(INFO, L2FWD, "lcore %u has nothing to do\n", lcore_id);
+ return;
+ }
+
+ RTE_LOG(INFO, L2FWD, "entering main loop on lcore %u\n", lcore_id);
+
+ for (i = 0; i < qconf->n_rx_port; i++) {
+
+ portid = qconf->rx_port_list[i];
+ RTE_LOG(INFO, L2FWD, " -- lcoreid=%u portid=%u\n", lcore_id,
+ portid);
+
+ }
+
+ while (!force_quit) {
+
+ cur_tsc = rte_rdtsc();
+
+ /*
+ * TX burst queue drain
+ */
+ diff_tsc = cur_tsc - prev_tsc;
+ if (unlikely(diff_tsc > drain_tsc)) {
+
+ for (i = 0; i < qconf->n_rx_port; i++) {
+
+ portid =
+ l2fwd_dst_ports[qconf->rx_port_list[i]];
+ buffer = tx_buffer[portid];
+
+ sent = rte_eth_tx_buffer_flush(portid, 0,
+ buffer);
+ if (sent)
+ port_statistics[portid].tx += sent;
+
+ }
+
+ /* if timer is enabled */
+ if (timer_period > 0) {
+
+ /* advance the timer */
+ timer_tsc += diff_tsc;
+
+ /* if timer has reached its timeout */
+ if (unlikely(timer_tsc >= timer_period)) {
+
+ /* do this only on master core */
+ if (lcore_id ==
+ rte_get_master_lcore()) {
+ print_stats();
+ /* reset the timer */
+ timer_tsc = 0;
+ }
+ }
+ }
+
+ prev_tsc = cur_tsc;
+ }
+
+ /*
+ * Read packet from RX queues
+ */
+ for (i = 0; i < qconf->n_rx_port; i++) {
+
+ portid = qconf->rx_port_list[i];
+ nb_rx = rte_eth_rx_burst(portid, 0,
+ pkts_burst, MAX_PKT_BURST);
+
+ port_statistics[portid].rx += nb_rx;
+
+ for (j = 0; j < nb_rx; j++) {
+ m = pkts_burst[j];
+ rte_prefetch0(rte_pktmbuf_mtod(m, void *));
+ l2fwd_simple_forward(m, portid);
+ }
+ }
+ }
+}
+
+static int
+l2fwd_launch_one_lcore(__attribute__((unused)) void *dummy)
+{
+ l2fwd_main_loop();
+ return 0;
+}
+
+/* display usage */
+static void
+l2fwd_usage(const char *prgname)
+{
+ printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
+ " -p PORTMASK: hexadecimal bitmask of ports to configure\n"
+ " -q NQ: number of queue (=ports) per lcore (default is 1)\n"
+ " -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default, 86400 maximum)\n"
+ " --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default)\n"
+ " When enabled:\n"
+ " - The source MAC address is replaced by the TX port MAC address\n"
+ " - The destination MAC address is replaced by 02:00:00:00:00:TX_PORT_ID\n",
+ prgname);
+}
+
+static int
+l2fwd_parse_portmask(const char *portmask)
+{
+ char *end = NULL;
+ unsigned long pm;
+
+ /* parse hexadecimal string */
+ pm = strtoul(portmask, &end, 16);
+ if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+
+ if (pm == 0)
+ return -1;
+
+ return pm;
+}
+
+static unsigned int
+l2fwd_parse_nqueue(const char *q_arg)
+{
+ char *end = NULL;
+ unsigned long n;
+
+ /* parse hexadecimal string */
+ n = strtoul(q_arg, &end, 10);
+ if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return 0;
+ if (n == 0)
+ return 0;
+ if (n >= MAX_RX_QUEUE_PER_LCORE)
+ return 0;
+
+ return n;
+}
+
+static int
+l2fwd_parse_timer_period(const char *q_arg)
+{
+ char *end = NULL;
+ int n;
+
+ /* parse number string */
+ n = strtol(q_arg, &end, 10);
+ if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+ if (n >= MAX_TIMER_PERIOD)
+ return -1;
+
+ return n;
+}
+
+static const char short_options[] =
+ "p:" /* portmask */
+ "q:" /* number of queues */
+ "T:" /* timer period */
+ ;
+
+#define CMD_LINE_OPT_MAC_UPDATING "mac-updating"
+#define CMD_LINE_OPT_NO_MAC_UPDATING "no-mac-updating"
+
+enum {
+ /* long options mapped to a short option */
+
+ /* first long only option value must be >= 256, so that we won't
+ * conflict with short options
+ */
+ CMD_LINE_OPT_MIN_NUM = 256,
+};
+
+static const struct option lgopts[] = {
+ { CMD_LINE_OPT_MAC_UPDATING, no_argument, &mac_updating, 1},
+ { CMD_LINE_OPT_NO_MAC_UPDATING, no_argument, &mac_updating, 0},
+ {NULL, 0, 0, 0}
+};
+
+/* Parse the argument given in the command line of the application */
+static int
+l2fwd_parse_args(int argc, char **argv)
+{
+ int opt, ret, timer_secs;
+ char **argvopt;
+ int option_index;
+ char *prgname = argv[0];
+
+ argvopt = argv;
+
+ while ((opt = getopt_long(argc, argvopt, short_options,
+ lgopts, &option_index)) != EOF) {
+
+ switch (opt) {
+ /* portmask */
+ case 'p':
+ l2fwd_enabled_port_mask = l2fwd_parse_portmask(optarg);
+ if (l2fwd_enabled_port_mask == 0) {
+ printf("invalid portmask\n");
+ l2fwd_usage(prgname);
+ return -1;
+ }
+ break;
+
+ /* nqueue */
+ case 'q':
+ l2fwd_rx_queue_per_lcore = l2fwd_parse_nqueue(optarg);
+ if (l2fwd_rx_queue_per_lcore == 0) {
+ printf("invalid queue number\n");
+ l2fwd_usage(prgname);
+ return -1;
+ }
+ break;
+
+ /* timer period */
+ case 'T':
+ timer_secs = l2fwd_parse_timer_period(optarg);
+ if (timer_secs < 0) {
+ printf("invalid timer period\n");
+ l2fwd_usage(prgname);
+ return -1;
+ }
+ timer_period = timer_secs;
+ break;
+
+ /* long options */
+ case 0:
+ break;
+
+ default:
+ l2fwd_usage(prgname);
+ return -1;
+ }
+ }
+
+ if (optind >= 0)
+ argv[optind-1] = prgname;
+
+ ret = optind-1;
+ optind = 1; /* reset getopt lib */
+ return ret;
+}
+
+/* Check the link status of all ports in up to 9s, and print them finally */
+static void
+check_all_ports_link_status(uint32_t port_mask)
+{
+#define CHECK_INTERVAL 100 /* 100ms */
+#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
+ uint16_t portid;
+ uint8_t count, all_ports_up, print_flag = 0;
+ struct rte_eth_link link;
+
+ printf("\nChecking link status");
+ fflush(stdout);
+ for (count = 0; count <= MAX_CHECK_TIME; count++) {
+ if (force_quit)
+ return;
+ all_ports_up = 1;
+ RTE_ETH_FOREACH_DEV(portid) {
+ if (force_quit)
+ return;
+ if ((port_mask & (1 << portid)) == 0)
+ continue;
+ memset(&link, 0, sizeof(link));
+ rte_eth_link_get_nowait(portid, &link);
+ /* print link status if flag set */
+ if (print_flag == 1) {
+ if (link.link_status)
+ printf(
+ "Port%d Link Up. Speed %u Mbps - %s\n",
+ portid, link.link_speed,
+ (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
+ ("full-duplex") : ("half-duplex\n"));
+ else
+ printf("Port %d Link Down\n", portid);
+ continue;
+ }
+ /* clear all_ports_up flag if any link down */
+ if (link.link_status == ETH_LINK_DOWN) {
+ all_ports_up = 0;
+ break;
+ }
+ }
+ /* after finally printing all link status, get out */
+ if (print_flag == 1)
+ break;
+
+ if (all_ports_up == 0) {
+ printf(".");
+ fflush(stdout);
+ rte_delay_ms(CHECK_INTERVAL);
+ }
+
+ /* set the print_flag if all ports up or timeout */
+ if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
+ print_flag = 1;
+ printf("done\n");
+ }
+ }
+}
+
+static void
+signal_handler(int signum)
+{
+ if (signum == SIGINT || signum == SIGTERM) {
+ printf("\n\nSignal %d received, preparing to exit...\n",
+ signum);
+ force_quit = true;
+ }
+}
+
+int
+main(int argc, char **argv)
+{
+ struct lcore_queue_conf *qconf;
+ int ret;
+ uint16_t nb_ports;
+ uint16_t nb_ports_available = 0;
+ uint16_t portid, last_port;
+ unsigned int lcore_id, rx_lcore_id;
+ unsigned int nb_ports_in_mask = 0;
+ unsigned int nb_lcores = 0;
+ unsigned int nb_mbufs;
+
+ /* init EAL */
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid EAL arguments\n");
+ argc -= ret;
+ argv += ret;
+
+ force_quit = false;
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+
+ /* parse application arguments (after the EAL ones) */
+ ret = l2fwd_parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid L2FWD arguments\n");
+
+ printf("MAC updating %s\n", mac_updating ? "enabled" : "disabled");
+
+ /* convert to number of cycles */
+ timer_period *= rte_get_timer_hz();
+
+ nb_ports = rte_eth_dev_count_avail();
+ if (nb_ports == 0)
+ rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
+
+ /* check port mask to possible port mask */
+ if (l2fwd_enabled_port_mask & ~((1 << nb_ports) - 1))
+ rte_exit(EXIT_FAILURE, "Invalid portmask; possible (0x%x)\n",
+ (1 << nb_ports) - 1);
+
+ /* reset l2fwd_dst_ports */
+ for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++)
+ l2fwd_dst_ports[portid] = 0;
+ last_port = 0;
+
+ /*
+ * Each logical core is assigned a dedicated TX queue on each port.
+ */
+ RTE_ETH_FOREACH_DEV(portid) {
+ /* skip ports that are not enabled */
+ if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
+ continue;
+
+ if (nb_ports_in_mask % 2) {
+ l2fwd_dst_ports[portid] = last_port;
+ l2fwd_dst_ports[last_port] = portid;
+ } else
+ last_port = portid;
+
+ nb_ports_in_mask++;
+ }
+ if (nb_ports_in_mask % 2) {
+ printf("Notice: odd number of ports in portmask.\n");
+ l2fwd_dst_ports[last_port] = last_port;
+ }
+
+ rx_lcore_id = 0;
+ qconf = NULL;
+
+ /* Initialize the port/queue configuration of each logical core */
+ RTE_ETH_FOREACH_DEV(portid) {
+ /* skip ports that are not enabled */
+ if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
+ continue;
+
+ /* get the lcore_id for this port */
+ while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
+ lcore_queue_conf[rx_lcore_id].n_rx_port ==
+ l2fwd_rx_queue_per_lcore) {
+ rx_lcore_id++;
+ if (rx_lcore_id >= RTE_MAX_LCORE)
+ rte_exit(EXIT_FAILURE, "Not enough cores\n");
+ }
+
+ if (qconf != &lcore_queue_conf[rx_lcore_id]) {
+ /* Assigned a new logical core in the loop above. */
+ qconf = &lcore_queue_conf[rx_lcore_id];
+ nb_lcores++;
+ }
+
+ qconf->rx_port_list[qconf->n_rx_port] = portid;
+ qconf->n_rx_port++;
+ printf("Lcore %u: RX port %u\n", rx_lcore_id, portid);
+ }
+
+ nb_mbufs = RTE_MAX(nb_ports * (nb_rxd + nb_txd + MAX_PKT_BURST +
+ nb_lcores * MEMPOOL_CACHE_SIZE), 8192U);
+
+ /* create the mbuf pool */
+ l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
+ MEMPOOL_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
+ rte_socket_id());
+ if (l2fwd_pktmbuf_pool == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
+
+ /* Initialise each port */
+ RTE_ETH_FOREACH_DEV(portid) {
+ struct rte_eth_rxconf rxq_conf;
+ struct rte_eth_txconf txq_conf;
+ struct rte_eth_conf local_port_conf = port_conf;
+ struct rte_eth_dev_info dev_info;
+
+ /* skip ports that are not enabled */
+ if ((l2fwd_enabled_port_mask & (1 << portid)) == 0) {
+ printf("Skipping disabled port %u\n", portid);
+ continue;
+ }
+ nb_ports_available++;
+
+ /* init port */
+ printf("Initializing port %u... ", portid);
+ fflush(stdout);
+ rte_eth_dev_info_get(portid, &dev_info);
+ if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ local_port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+ ret = rte_eth_dev_configure(portid, 1, 1, &local_port_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%u\n",
+ ret, portid);
+
+ ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
+ &nb_txd);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot adjust number of descriptors: err=%d, port=%u\n",
+ ret, portid);
+
+ rte_eth_macaddr_get(portid, &l2fwd_ports_eth_addr[portid]);
+
+ /* init one RX queue */
+ fflush(stdout);
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = local_port_conf.rxmode.offloads;
+ ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
+ rte_eth_dev_socket_id(portid),
+ &rxq_conf,
+ l2fwd_pktmbuf_pool);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup:err=%d, port=%u\n",
+ ret, portid);
+
+ /* init one TX queue on each port */
+ fflush(stdout);
+ txq_conf = dev_info.default_txconf;
+ txq_conf.offloads = local_port_conf.txmode.offloads;
+ ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
+ rte_eth_dev_socket_id(portid),
+ &txq_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup:err=%d, port=%u\n",
+ ret, portid);
+
+ /* Initialize TX buffers */
+ tx_buffer[portid] = rte_zmalloc_socket("tx_buffer",
+ RTE_ETH_TX_BUFFER_SIZE(MAX_PKT_BURST), 0,
+ rte_eth_dev_socket_id(portid));
+ if (tx_buffer[portid] == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot allocate buffer for tx on port %u\n",
+ portid);
+
+ rte_eth_tx_buffer_init(tx_buffer[portid], MAX_PKT_BURST);
+
+ ret = rte_eth_tx_buffer_set_err_callback(tx_buffer[portid],
+ rte_eth_tx_buffer_count_callback,
+ &port_statistics[portid].dropped);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot set error callback for tx buffer on port %u\n",
+ portid);
+
+ /* Start device */
+ ret = rte_eth_dev_start(portid);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "rte_eth_dev_start:err=%d, port=%u\n",
+ ret, portid);
+
+ printf("done:\n");
+
+ rte_eth_promiscuous_enable(portid);
+
+ printf("Port %u, MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n\n",
+ portid,
+ l2fwd_ports_eth_addr[portid].addr_bytes[0],
+ l2fwd_ports_eth_addr[portid].addr_bytes[1],
+ l2fwd_ports_eth_addr[portid].addr_bytes[2],
+ l2fwd_ports_eth_addr[portid].addr_bytes[3],
+ l2fwd_ports_eth_addr[portid].addr_bytes[4],
+ l2fwd_ports_eth_addr[portid].addr_bytes[5]);
+
+ /* initialize port stats */
+ memset(&port_statistics, 0, sizeof(port_statistics));
+ }
+
+ if (!nb_ports_available) {
+ rte_exit(EXIT_FAILURE,
+ "All available ports are disabled. Please set portmask.\n");
+ }
+
+ check_all_ports_link_status(l2fwd_enabled_port_mask);
+
+ ret = 0;
+ /* launch per-lcore init on every lcore */
+ rte_eal_mp_remote_launch(l2fwd_launch_one_lcore, NULL, CALL_MASTER);
+ RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+ if (rte_eal_wait_lcore(lcore_id) < 0) {
+ ret = -1;
+ break;
+ }
+ }
+
+ RTE_ETH_FOREACH_DEV(portid) {
+ if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
+ continue;
+ printf("Closing port %d...", portid);
+ rte_eth_dev_stop(portid);
+ rte_eth_dev_close(portid);
+ printf(" Done\n");
+ }
+ printf("Bye...\n");
+
+ return ret;
+}
diff --git a/examples/l2fwd-event/meson.build b/examples/l2fwd-event/meson.build
new file mode 100644
index 0000000..c34e11e
--- /dev/null
+++ b/examples/l2fwd-event/meson.build
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation
+
+# meson file, for building this example as part of a main DPDK build.
+#
+# To build this example as a standalone application with an already-installed
+# DPDK instance, use 'make'
+
+sources = files(
+ 'main.c'
+)
--
2.7.4
next prev parent reply other threads:[~2019-06-03 17:33 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 17:32 [dpdk-dev] [PATCH 00/39] adding eventmode helper library Anoob Joseph
2019-06-03 17:32 ` Anoob Joseph [this message]
2019-06-03 17:32 ` [dpdk-dev] [PATCH 02/39] examples/l2fwd-event: move macros to common header Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 03/39] examples/l2fwd-event: move structures " Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 04/39] examples/l2fwd-event: move global vars " Anoob Joseph
2019-06-07 10:02 ` Jerin Jacob Kollanukkaran
2019-06-07 10:45 ` Anoob Joseph
2019-06-07 12:47 ` Jerin Jacob Kollanukkaran
2019-06-03 17:32 ` [dpdk-dev] [PATCH 05/39] examples/l2fwd-event: move dataplane code to new file Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 06/39] examples/l2fwd-event: remove unused header includes Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 07/39] examples/l2fwd-event: move drain buffers to new function Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 08/39] examples/l2fwd-event: optimize check for master core Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 09/39] examples/l2fwd-event: move periodic tasks to new func Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 10/39] examples/l2fwd-event: do timer updates only on master Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 11/39] examples/l2fwd-event: move pkt send code to a new func Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 12/39] examples/l2fwd-event: use fprintf in usage print Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 13/39] examples/l2fwd-event: improvements to the " Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 14/39] eventdev: add files for eventmode helper Anoob Joseph
2019-06-10 10:10 ` Jerin Jacob Kollanukkaran
2019-06-03 17:32 ` [dpdk-dev] [PATCH 15/39] eventdev: add routines for logging " Anoob Joseph
2019-06-10 10:12 ` Jerin Jacob Kollanukkaran
2019-06-17 9:09 ` Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 16/39] eventdev: add eventmode CL options framework Anoob Joseph
2019-06-10 10:19 ` Jerin Jacob Kollanukkaran
2019-06-17 10:14 ` Anoob Joseph
2019-06-11 8:58 ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2019-06-03 17:32 ` [dpdk-dev] [PATCH 17/39] eventdev: allow application to set ethernet portmask Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 18/39] eventdev: add framework for eventmode conf Anoob Joseph
2019-06-10 10:06 ` Jerin Jacob Kollanukkaran
2019-06-20 7:26 ` Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 19/39] eventdev: add common initialize routine for eventmode devs Anoob Joseph
2019-06-10 10:23 ` Jerin Jacob Kollanukkaran
2019-06-17 10:22 ` Anoob Joseph
2019-06-11 8:58 ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2019-06-03 17:32 ` [dpdk-dev] [PATCH 20/39] eventdev: add eventdevice init for eventmode Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 21/39] eventdev: add eventdev port-lcore link Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 22/39] eventdev: add option to specify schedule mode for app stage Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 23/39] eventdev: add placeholder for ethdev init Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 24/39] eventdev: add Rx adapter init in eventmode Anoob Joseph
2019-06-10 14:56 ` Carrillo, Erik G
2019-06-11 3:45 ` [dpdk-dev] [EXT] " Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 25/39] eventdev: add routine to validate conf Anoob Joseph
2019-06-10 10:25 ` Jerin Jacob Kollanukkaran
2019-06-17 10:23 ` Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 26/39] eventdev: add default conf for event devs field in conf Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 27/39] eventdev: add default conf for Rx adapter conf Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 28/39] eventdev: add default conf for event port-lcore link Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 29/39] eventdev: add routines to display the eventmode conf Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 30/39] eventdev: add routine to access eventmode link info Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 31/39] eventdev: add routine to access event queue for eth Tx Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 32/39] eventdev: add routine to launch eventmode workers Anoob Joseph
2019-06-10 14:31 ` Carrillo, Erik G
2019-06-17 10:34 ` [dpdk-dev] [EXT] " Anoob Joseph
2019-06-10 14:46 ` [dpdk-dev] " Carrillo, Erik G
2019-06-27 5:50 ` Anoob Joseph
2019-06-11 8:58 ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2019-06-03 17:32 ` [dpdk-dev] [PATCH 33/39] eventdev: add Tx adapter support Anoob Joseph
2019-06-11 8:58 ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2019-06-03 17:32 ` [dpdk-dev] [PATCH 34/39] eventdev: add support for internal ports Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 35/39] eventdev: display Tx adapter conf Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 36/39] examples/l2fwd-event: add eventmode for l2fwd Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 37/39] examples/l2fwd-event: add eventmode worker Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 38/39] " Anoob Joseph
2019-06-03 17:32 ` [dpdk-dev] [PATCH 39/39] " Anoob Joseph
2019-06-07 9:48 ` [dpdk-dev] [PATCH 00/39] adding eventmode helper library Jerin Jacob Kollanukkaran
2019-06-11 10:44 ` Mattias Rönnblom
2019-06-14 9:18 ` [dpdk-dev] [EXT] " Anoob Joseph
2019-06-17 13:23 ` Mattias Rönnblom
2019-06-20 3:44 ` Anoob Joseph
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1559583160-13944-2-git-send-email-anoobj@marvell.com \
--to=anoobj@marvell.com \
--cc=abhinandan.gujjar@intel.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=erik.g.carrillo@intel.com \
--cc=harry.van.haaren@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=jerinj@marvell.com \
--cc=lbartosik@marvell.com \
--cc=liang.j.ma@intel.com \
--cc=mattias.ronnblom@ericsson.com \
--cc=nikhil.rao@intel.com \
--cc=nipun.gupta@nxp.com \
--cc=pablo.de.lara.guarch@intel.com \
--cc=pathreya@marvell.com \
--cc=pbhagavatula@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).