[dpdk-dev] [PATCH] app/testpmd: fix to add offloads confguration for queue

[Wei Zhao <wei.zhao1@intel.com>]

When adding offloads from commandline, not only port
related configuration bits should be set, but also queue
related offloads configuration bits, or it will cause error.
For example, test in this process for ixgbe:
(1)./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4
-- -i --portmask=0x1 --port-topology=loop --disable-crc-strip
(2)port stop all
(3)port config all crc-strip on
(4)port start all
we will see "Fail to configure port 0 rx queues" of warning info.

Fixes: 0074d02fca21 ("app/testpmd: convert to new Rx offloads API")

Signed-off-by: wei zhao <wei.zhao1@intel.com>
---
 app/test-pmd/cmdline.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index d1e0d44..1b2daa1 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -2047,6 +2047,7 @@ cmd_config_rx_mode_flag_parsed(void *parsed_result,
 {
 	struct cmd_config_rx_mode_flag *res = parsed_result;
 	portid_t pid;
+	int k;
 
 	if (!all_ports_stopped()) {
 		printf("Please stop all ports first\n");
@@ -2147,6 +2148,10 @@ cmd_config_rx_mode_flag_parsed(void *parsed_result,
 			return;
 		}
 		port->dev_conf.rxmode.offloads = rx_offloads;
+		/* Apply Rx offloads configuration */
+		for (k = 0; k < port->dev_info.max_rx_queues; k++)
+			port->rx_conf[k].offloads =
+				port->dev_conf.rxmode.offloads;
 	}
 
 	init_port_config();
@@ -4368,6 +4373,7 @@ cmd_csum_parsed(void *parsed_result,
 	int hw = 0;
 	uint64_t csum_offloads = 0;
 	struct rte_eth_dev_info dev_info;
+	int k;
 
 	if (port_id_is_invalid(res->port_id, ENABLED_WARN)) {
 		printf("invalid port %d\n", res->port_id);
@@ -4443,6 +4449,10 @@ cmd_csum_parsed(void *parsed_result,
 			ports[res->port_id].dev_conf.txmode.offloads &=
 							(~csum_offloads);
 		}
+		/* Apply Tx offloads configuration */
+		for (k = 0; k < ports[res->port_id].dev_info.max_tx_queues; k++)
+			ports[res->port_id].tx_conf[k].offloads =
+				ports[res->port_id].dev_conf.txmode.offloads;
 	}
 	csum_show(res->port_id);
 
@@ -4565,6 +4575,7 @@ cmd_tso_set_parsed(void *parsed_result,
 {
 	struct cmd_tso_set_result *res = parsed_result;
 	struct rte_eth_dev_info dev_info;
+	int k;
 
 	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
 		return;
@@ -4594,6 +4605,10 @@ cmd_tso_set_parsed(void *parsed_result,
 		printf("TSO segment size for non-tunneled packets is %d\n",
 			ports[res->port_id].tso_segsz);
 	}
+	/* Apply Tx offloads configuration */
+	for (k = 0; k < ports[res->port_id].dev_info.max_tx_queues; k++)
+		ports[res->port_id].tx_conf[k].offloads =
+			ports[res->port_id].dev_conf.txmode.offloads;
 
 	/* display warnings if configuration is not supported by the NIC */
 	rte_eth_dev_info_get(res->port_id, &dev_info);
@@ -4694,6 +4709,7 @@ cmd_tunnel_tso_set_parsed(void *parsed_result,
 {
 	struct cmd_tunnel_tso_set_result *res = parsed_result;
 	struct rte_eth_dev_info dev_info;
+	int k;
 
 	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
 		return;
@@ -4747,6 +4763,10 @@ cmd_tunnel_tso_set_parsed(void *parsed_result,
 		      DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM))
 			printf("Warning: csum set outer-ip must be set to hw "
 				"if outer L3 is IPv4; not necessary for IPv6\n");
+		/* Apply Tx offloads configuration */
+		for (k = 0; k < ports[res->port_id].dev_info.max_tx_queues; k++)
+			ports[res->port_id].tx_conf[k].offloads =
+				ports[res->port_id].dev_conf.txmode.offloads;
 	}
 
 	cmd_reconfig_device_queue(res->port_id, 1, 1);
-- 
2.7.5