DPDK patches and discussions
 help / color / mirror / Atom feed
From: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
To: dev@dpdk.org
Cc: matan@mellanox.com, rasland@mellanox.com
Subject: [dpdk-dev] [PATCH] net/mlx5: fix device scan within switch domain
Date: Mon,  7 Oct 2019 13:56:19 +0000	[thread overview]
Message-ID: <1570456579-5075-1-git-send-email-viacheslavo@mellanox.com> (raw)

In LAG configuration the devices in the same switch domain
might be spawned on the base of different PCI devices, so
we should check all devices backed by mlx5 PMD whether they
belong to specified switch domain. When the new devices are
being created it is not possible to detect whether the
sibling devices created in the current probe() loop belong
to the driver, driver field is not filled yet (it will be
done on returned success of current probe()). This patch
updates the device scanning, allowing extra match on
current backing PCI device, is being used to create siblings.

Fixes: 9f4a56d68966 ("net/mlx5: extend switch domain searching range")

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
---
 drivers/net/mlx5/mlx5.c        | 30 +++++++++++++++++++++++-------
 drivers/net/mlx5/mlx5.h        |  8 ++++----
 drivers/net/mlx5/mlx5_ethdev.c |  4 ++--
 3 files changed, 29 insertions(+), 13 deletions(-)

diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 13d112e..f886d51 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -927,7 +927,7 @@ struct mlx5_dev_spawn_data {
 		unsigned int c = 0;
 		uint16_t port_id;
 
-		MLX5_ETH_FOREACH_DEV(port_id) {
+		MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
 			struct mlx5_priv *opriv =
 				rte_eth_devices[port_id].data->dev_private;
 
@@ -1546,7 +1546,7 @@ struct mlx5_dev_spawn_data {
 	if (sh->refcnt == 1)
 		return 0;
 	/* Find the device with shared context. */
-	MLX5_ETH_FOREACH_DEV(port_id) {
+	MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
 		struct mlx5_priv *opriv =
 			rte_eth_devices[port_id].data->dev_private;
 
@@ -1904,7 +1904,7 @@ struct mlx5_dev_spawn_data {
 	 * Look for sibling devices in order to reuse their switch domain
 	 * if any, otherwise allocate one.
 	 */
-	MLX5_ETH_FOREACH_DEV(port_id) {
+	MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
 		const struct mlx5_priv *opriv =
 			rte_eth_devices[port_id].data->dev_private;
 
@@ -2782,17 +2782,33 @@ struct mlx5_dev_spawn_data {
 	return ret;
 }
 
+/**
+ * Look for the ethernet device belonging to mlx5 driver.
+ *
+ * @param[in] port_id
+ *   port_id to start looking for device.
+ * @param[in] pci_dev
+ *   Pointer to the hint PCI device. When device is being probed
+ *   the its siblings (master and preceding representors might
+ *   not have assigned driver yet (because the mlx5_pci_probe()
+ *   is not completed yet, for this case match on hint PCI
+ *   device may be used to detect sibling device.
+ *
+ * @return
+ *   port_id of found device, RTE_MAX_ETHPORT if not found.
+ */
 uint16_t
-mlx5_eth_find_next(uint16_t port_id)
+mlx5_eth_find_next(uint16_t port_id, struct rte_pci_device *pci_dev)
 {
 	while (port_id < RTE_MAX_ETHPORTS) {
 		struct rte_eth_dev *dev = &rte_eth_devices[port_id];
 
 		if (dev->state != RTE_ETH_DEV_UNUSED &&
 		    dev->device &&
-		    dev->device->driver &&
-		    dev->device->driver->name &&
-		    !strcmp(dev->device->driver->name, MLX5_DRIVER_NAME))
+		    (dev->device == &pci_dev->device ||
+		     (dev->device->driver &&
+		     dev->device->driver->name &&
+		     !strcmp(dev->device->driver->name, MLX5_DRIVER_NAME))))
 			break;
 		port_id++;
 	}
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 164df11..baf945c 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -682,13 +682,13 @@ int32_t mlx5_release_dbr(struct rte_eth_dev *dev, uint32_t umem_id,
 			 uint64_t offset);
 int mlx5_udp_tunnel_port_add(struct rte_eth_dev *dev,
 			      struct rte_eth_udp_tunnel *udp_tunnel);
-uint16_t mlx5_eth_find_next(uint16_t port_id);
+uint16_t mlx5_eth_find_next(uint16_t port_id, struct rte_pci_device *pci_dev);
 
 /* Macro to iterate over all valid ports for mlx5 driver. */
-#define MLX5_ETH_FOREACH_DEV(port_id) \
-	for (port_id = mlx5_eth_find_next(0); \
+#define MLX5_ETH_FOREACH_DEV(port_id, pci_dev) \
+	for (port_id = mlx5_eth_find_next(0, pci_dev); \
 	     port_id < RTE_MAX_ETHPORTS; \
-	     port_id = mlx5_eth_find_next(port_id + 1))
+	     port_id = mlx5_eth_find_next(port_id + 1, pci_dev))
 
 /* mlx5_ethdev.c */
 
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index aa645d0..f2b1752 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -601,7 +601,7 @@ struct ethtool_link_settings {
 			info->switch_info.port_id |=
 				priv->pf_bond << MLX5_PORT_ID_BONDING_PF_SHIFT;
 		}
-		MLX5_ETH_FOREACH_DEV(port_id) {
+		MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
 			struct mlx5_priv *opriv =
 				rte_eth_devices[port_id].data->dev_private;
 
@@ -734,7 +734,7 @@ int mlx5_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size)
 	priv = dev->data->dev_private;
 	domain_id = priv->domain_id;
 	assert(priv->representor);
-	MLX5_ETH_FOREACH_DEV(port_id) {
+	MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
 		struct mlx5_priv *opriv =
 			rte_eth_devices[port_id].data->dev_private;
 		if (opriv &&
-- 
1.8.3.1


             reply	other threads:[~2019-10-07 13:56 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-07 13:56 Viacheslav Ovsiienko [this message]
2019-10-08  9:35 ` Raslan Darawsheh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1570456579-5075-1-git-send-email-viacheslavo@mellanox.com \
    --to=viacheslavo@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=matan@mellanox.com \
    --cc=rasland@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).