DPDK patches and discussions
 help / color / mirror / Atom feed
From: Mahipal Challa <mchalla@marvell.com>
To: <dev@dpdk.org>
Cc: <jerinj@marvell.com>, <pathreya@marvell.com>,
	<snilla@marvell.com>, <venkatn@marvell.com>
Subject: [dpdk-dev]  [PATCH v1 6/6] raw/octeontx2_ep: add driver self test
Date: Sun, 8 Dec 2019 21:05:42 +0530	[thread overview]
Message-ID: <1575819342-20008-7-git-send-email-mchalla@marvell.com> (raw)
In-Reply-To: <1575819342-20008-1-git-send-email-mchalla@marvell.com>

Add rawdev's selftest feature in SDP VF driver, which
verifies the EP mode functionality test.

Signed-off-by: Mahipal Challa <mchalla@marvell.com>
---
 doc/guides/rawdevs/octeontx2_ep.rst       |  13 +++
 drivers/raw/octeontx2_ep/Makefile         |   1 +
 drivers/raw/octeontx2_ep/meson.build      |   1 +
 drivers/raw/octeontx2_ep/otx2_ep_rawdev.c |   1 +
 drivers/raw/octeontx2_ep/otx2_ep_rawdev.h |   2 +
 drivers/raw/octeontx2_ep/otx2_ep_test.c   | 164 ++++++++++++++++++++++++++++++
 6 files changed, 182 insertions(+)

diff --git a/doc/guides/rawdevs/octeontx2_ep.rst b/doc/guides/rawdevs/octeontx2_ep.rst
index 39a7c29..bbcf530 100644
--- a/doc/guides/rawdevs/octeontx2_ep.rst
+++ b/doc/guides/rawdevs/octeontx2_ep.rst
@@ -74,3 +74,16 @@ Performing Data Transfer
 To perform data transfer using SDP VF EP rawdev devices use standard
 ``rte_rawdev_enqueue_buffers()`` and ``rte_rawdev_dequeue_buffers()`` APIs.
 
+Self test
+---------
+
+On EAL initialization, SDP VF devices will be probed and populated into the
+raw devices. The rawdev ID of the device can be obtained using
+
+* Invoke ``rte_rawdev_get_dev_id("SDPEP:x")`` from the test application
+  where x is the VF device's bus id specified in "bus:device.func"(BDF)
+  format. Use this index for further rawdev function calls.
+
+* The driver's selftest rawdev API can be used to verify the SDP EP mode
+  functional tests which can send/receive the raw data packets to/from the
+  EP device.
diff --git a/drivers/raw/octeontx2_ep/Makefile b/drivers/raw/octeontx2_ep/Makefile
index 02853fb..44fdf89 100644
--- a/drivers/raw/octeontx2_ep/Makefile
+++ b/drivers/raw/octeontx2_ep/Makefile
@@ -37,6 +37,7 @@ LIBABIVER := 1
 #
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_rawdev.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_enqdeq.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_test.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_vf.c
 
 
diff --git a/drivers/raw/octeontx2_ep/meson.build b/drivers/raw/octeontx2_ep/meson.build
index 99e6c6d..0e6338f 100644
--- a/drivers/raw/octeontx2_ep/meson.build
+++ b/drivers/raw/octeontx2_ep/meson.build
@@ -5,4 +5,5 @@
 deps += ['bus_pci', 'common_octeontx2', 'rawdev']
 sources = files('otx2_ep_rawdev.c',
 		'otx2_ep_enqdeq.c',
+		'otx2_ep_test.c',
 		'otx2_ep_vf.c')
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
index ddb208d..c5c0cf3 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
@@ -253,6 +253,7 @@
 	.dev_close      = sdp_rawdev_close,
 	.enqueue_bufs   = sdp_rawdev_enqueue,
 	.dequeue_bufs   = sdp_rawdev_dequeue,
+	.dev_selftest   = sdp_rawdev_selftest,
 };
 
 static int
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
index a77cbab..dab2fb7 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
@@ -494,4 +494,6 @@ int sdp_rawdev_enqueue(struct rte_rawdev *dev, struct rte_rawdev_buf **buffers,
 int sdp_rawdev_dequeue(struct rte_rawdev *dev, struct rte_rawdev_buf **buffers,
 		       unsigned int count, rte_rawdev_obj_t context);
 
+int sdp_rawdev_selftest(uint16_t dev_id);
+
 #endif /* _OTX2_EP_RAWDEV_H_ */
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_test.c b/drivers/raw/octeontx2_ep/otx2_ep_test.c
new file mode 100644
index 0000000..96fedb5
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/otx2_ep_test.c
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <rte_common.h>
+#include <rte_eal.h>
+#include <rte_lcore.h>
+#include <rte_mempool.h>
+
+#include <rte_rawdev.h>
+#include <rte_rawdev_pmd.h>
+
+#include "otx2_common.h"
+#include "otx2_ep_rawdev.h"
+
+#define SDP_IOQ_NUM_BUFS   (4 * 1024)
+#define SDP_IOQ_BUF_SIZE   (2 * 1024)
+
+#define SDP_TEST_PKT_FSZ   (0)
+#define SDP_TEST_PKT_SIZE  (1024)
+
+static int
+sdp_validate_data(struct sdp_droq_pkt *oq_pkt, uint8_t *iq_pkt,
+		  uint32_t pkt_len)
+{
+	if (!oq_pkt)
+		return -EINVAL;
+
+	if (pkt_len != oq_pkt->len) {
+		otx2_err("Invalid packet length");
+		return -EINVAL;
+	}
+
+	if (memcmp(oq_pkt->data, iq_pkt, pkt_len) != 0) {
+		otx2_err("Data validation failed");
+		return -EINVAL;
+	}
+	otx2_sdp_dbg("Data validation successful");
+
+	return 0;
+}
+
+static void
+sdp_ioq_buffer_fill(uint8_t *addr, uint32_t len)
+{
+	uint32_t idx;
+
+	memset(addr, 0, len);
+
+	for (idx = 0; idx < len; idx++)
+		addr[idx] = idx;
+}
+
+static struct rte_mempool*
+sdp_ioq_mempool_create(void)
+{
+	struct rte_mempool *mpool;
+
+	mpool = rte_mempool_create("ioqbuf_pool",
+				   SDP_IOQ_NUM_BUFS /*num elt*/,
+				   SDP_IOQ_BUF_SIZE /*elt size*/,
+				   0 /*cache_size*/,
+				   0 /*private_data_size*/,
+				   NULL /*mp_init*/,
+				   NULL /*mp_init arg*/,
+				   NULL /*obj_init*/,
+				   NULL /*obj_init arg*/,
+				   rte_socket_id() /*socket id*/,
+				   (MEMPOOL_F_SP_PUT | MEMPOOL_F_SC_GET));
+
+	return mpool;
+}
+
+
+int
+sdp_rawdev_selftest(uint16_t dev_id)
+{
+	struct sdp_rawdev_info app_info = {0};
+	struct rte_rawdev_info dev_info = {0};
+
+	struct rte_rawdev_buf *d_buf[1];
+	struct sdp_droq_pkt oq_pkt;
+	struct sdp_soft_instr si;
+	struct sdp_device sdpvf;
+
+	uint32_t buf_size;
+	int ret = 0;
+	void *buf;
+
+	otx2_info("SDP RAWDEV Self Test: Started");
+
+	memset(&oq_pkt, 0x00, sizeof(oq_pkt));
+	d_buf[0] = (struct rte_rawdev_buf *)&oq_pkt;
+
+	struct rte_mempool *ioq_mpool = sdp_ioq_mempool_create();
+	if (!ioq_mpool) {
+		otx2_err("IOQ mpool creation failed");
+		return -ENOMEM;
+	}
+
+	app_info.enqdeq_mpool = ioq_mpool;
+	app_info.app_conf = NULL; /* Use default conf */
+
+	dev_info.dev_private = &app_info;
+
+	ret = rte_rawdev_configure(dev_id, &dev_info);
+	if (ret) {
+		otx2_err("Unable to configure SDP_VF %d", dev_id);
+		return -ENOMEM;
+	}
+	otx2_info("SDP VF rawdev[%d] configured successfully", dev_id);
+
+	memset(&si, 0x00, sizeof(si));
+	memset(&sdpvf, 0x00, sizeof(sdpvf));
+
+	buf_size = SDP_TEST_PKT_SIZE;
+
+	si.q_no = 0;
+	si.reqtype = SDP_REQTYPE_NORESP;
+	si.rptr = NULL;
+
+	si.ih.fsz = SDP_TEST_PKT_FSZ;
+	si.ih.tlen = buf_size;
+	si.ih.gather = 0;
+
+	/* Enqueue raw pkt data */
+	rte_mempool_get(ioq_mpool, &buf);
+	if (!buf) {
+		otx2_err("Buffer allocation failed");
+		return -ENOMEM;
+	}
+
+	sdp_ioq_buffer_fill(buf, buf_size);
+	si.dptr = (uint8_t *)buf;
+
+	rte_rawdev_enqueue_buffers(dev_id, NULL, 1, &si);
+	usleep(10000);
+
+	/* Dequeue raw pkt data */
+	ret = 0;
+	while (ret < 1) {
+		ret = rte_rawdev_dequeue_buffers(dev_id, &d_buf[0], 1, &si);
+		rte_pause();
+	}
+
+	/* Validate the dequeued raw pkt data */
+	if (sdp_validate_data((struct sdp_droq_pkt *)d_buf[0],
+			      buf, buf_size) != 0) {
+		otx2_err("Data invalid");
+		return -EINVAL;
+	}
+
+	rte_mempool_put(ioq_mpool, ((struct sdp_droq_pkt *)d_buf[0])->data);
+
+	otx2_info("SDP RAWDEV Self Test: Successful");
+
+	return 0;
+}
+
-- 
1.8.3.1


  parent reply	other threads:[~2019-12-08 15:37 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-08 15:35 [dpdk-dev] [PATCH v1 0/6] OCTEON TX2 End Point Driver Mahipal Challa
2019-12-08 15:35 ` [dpdk-dev] [PATCH v1 1/6] raw/octeontx2_ep: add build infra and device probe Mahipal Challa
2019-12-08 15:35 ` [dpdk-dev] [PATCH v1 2/6] raw/octeontx2_ep: add device configuration Mahipal Challa
2019-12-08 15:35 ` [dpdk-dev] [PATCH v1 3/6] raw/octeontx2_ep: add device uninitialization Mahipal Challa
2019-12-08 15:35 ` [dpdk-dev] [PATCH v1 4/6] raw/octeontx2_ep: add enqueue operation Mahipal Challa
2019-12-08 15:35 ` [dpdk-dev] [PATCH v1 5/6] raw/octeontx2_ep: add dequeue operation Mahipal Challa
2019-12-08 15:35 ` Mahipal Challa [this message]
  -- strict thread matches above, loose matches on Subject: below --
2019-12-06  6:39 [dpdk-dev] [PATCH v1 0/6] OCTEON TX2 End Point Driver Mahipal Challa
2019-12-06  6:39 ` [dpdk-dev] [PATCH v1 6/6] raw/octeontx2_ep: add driver self test Mahipal Challa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1575819342-20008-7-git-send-email-mchalla@marvell.com \
    --to=mchalla@marvell.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=pathreya@marvell.com \
    --cc=snilla@marvell.com \
    --cc=venkatn@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).