[dpdk-dev] [PATCH v3 13/13] examples/ipsec-secgw: make number of buffers dynamic

[Lukasz Bartosik <lbartosik@marvell.com>]

Make number of buffers in a pool nb_mbuf_in_pool dependent on number
of ports, cores and crypto queues. Add command line option -s which
when used overrides dynamic calculation of number of buffers in a pool.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
---
 examples/ipsec-secgw/ipsec-secgw.c | 59 +++++++++++++++++++++++++++++++-------
 1 file changed, 48 insertions(+), 11 deletions(-)

diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
index 862a7f0..f7acb52 100644
--- a/examples/ipsec-secgw/ipsec-secgw.c
+++ b/examples/ipsec-secgw/ipsec-secgw.c
@@ -59,8 +59,6 @@ volatile bool force_quit;
 
 #define MEMPOOL_CACHE_SIZE 256
 
-#define NB_MBUF	(32000)
-
 #define CDEV_QUEUE_DESC 2048
 #define CDEV_MAP_ENTRIES 16384
 #define CDEV_MP_NB_OBJS 1024
@@ -163,6 +161,7 @@ static int32_t promiscuous_on = 1;
 static int32_t numa_on = 1; /**< NUMA is enabled by default. */
 static uint32_t nb_lcores;
 static uint32_t single_sa;
+static uint32_t nb_bufs_in_pool;
 
 /*
  * RX/TX HW offload capabilities to enable/use on ethernet ports.
@@ -1259,6 +1258,7 @@ print_usage(const char *prgname)
 		" [-w REPLAY_WINDOW_SIZE]"
 		" [-e]"
 		" [-a]"
+		" [-s NUMBER_OF_MBUFS_IN_PKT_POOL]"
 		" -f CONFIG_FILE"
 		" --config (port,queue,lcore)[,(port,queue,lcore)]"
 		" [--single-sa SAIDX]"
@@ -1280,6 +1280,7 @@ print_usage(const char *prgname)
 		"     size for each SA\n"
 		"  -e enables ESN\n"
 		"  -a enables SA SQN atomic behaviour\n"
+		"  -s number of mbufs in packet pool (default 8192)\n"
 		"  -f CONFIG_FILE: Configuration file\n"
 		"  --config (port,queue,lcore): Rx queue configuration\n"
 		"  --single-sa SAIDX: In poll mode use single SA index for\n"
@@ -1479,7 +1480,7 @@ parse_args(int32_t argc, char **argv, struct eh_conf *eh_conf)
 
 	argvopt = argv;
 
-	while ((opt = getopt_long(argc, argvopt, "aelp:Pu:f:j:w:",
+	while ((opt = getopt_long(argc, argvopt, "aelp:Pu:f:j:w:s:",
 				lgopts, &option_index)) != EOF) {
 
 		switch (opt) {
@@ -1513,6 +1514,19 @@ parse_args(int32_t argc, char **argv, struct eh_conf *eh_conf)
 			cfgfile = optarg;
 			f_present = 1;
 			break;
+
+		case 's':
+			ret = parse_decimal(optarg);
+			if (ret < 0) {
+				printf("Invalid number of buffers in a pool: "
+					"%s\n", optarg);
+				print_usage(prgname);
+				return -1;
+			}
+
+			nb_bufs_in_pool = ret;
+			break;
+
 		case 'j':
 			ret = parse_decimal(optarg);
 			if (ret < RTE_MBUF_DEFAULT_BUF_SIZE ||
@@ -1876,12 +1890,12 @@ check_cryptodev_mask(uint8_t cdev_id)
 	return -1;
 }
 
-static int32_t
+static uint16_t
 cryptodevs_init(void)
 {
 	struct rte_cryptodev_config dev_conf;
 	struct rte_cryptodev_qp_conf qp_conf;
-	uint16_t idx, max_nb_qps, qp, i;
+	uint16_t idx, max_nb_qps, qp, total_nb_qps, i;
 	int16_t cdev_id;
 	struct rte_hash_parameters params = { 0 };
 
@@ -1909,6 +1923,7 @@ cryptodevs_init(void)
 	printf("lcore/cryptodev/qp mappings:\n");
 
 	idx = 0;
+	total_nb_qps = 0;
 	for (cdev_id = 0; cdev_id < rte_cryptodev_count(); cdev_id++) {
 		struct rte_cryptodev_info cdev_info;
 
@@ -1942,6 +1957,7 @@ cryptodevs_init(void)
 		if (qp == 0)
 			continue;
 
+		total_nb_qps += qp;
 		dev_conf.socket_id = rte_cryptodev_socket_id(cdev_id);
 		dev_conf.nb_queue_pairs = qp;
 		dev_conf.ff_disable = RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO;
@@ -1974,7 +1990,7 @@ cryptodevs_init(void)
 
 	printf("\n");
 
-	return 0;
+	return total_nb_qps;
 }
 
 static void
@@ -2607,16 +2623,18 @@ int32_t
 main(int32_t argc, char **argv)
 {
 	int32_t ret;
-	uint32_t lcore_id;
+	uint32_t lcore_id, nb_txq, nb_rxq = 0;
 	uint32_t cdev_id;
 	uint32_t i;
 	uint8_t socket_id;
-	uint16_t portid;
+	uint16_t portid, nb_crypto_qp, nb_ports = 0;
 	uint64_t req_rx_offloads[RTE_MAX_ETHPORTS];
 	uint64_t req_tx_offloads[RTE_MAX_ETHPORTS];
 	struct eh_conf *eh_conf = NULL;
 	size_t sess_sz;
 
+	nb_bufs_in_pool = 0;
+
 	/* init EAL */
 	ret = rte_eal_init(argc, argv);
 	if (ret < 0)
@@ -2665,6 +2683,26 @@ main(int32_t argc, char **argv)
 
 	sess_sz = max_session_size();
 
+	nb_crypto_qp = cryptodevs_init();
+
+	if (nb_bufs_in_pool == 0) {
+		RTE_ETH_FOREACH_DEV(portid) {
+			if ((enabled_port_mask & (1 << portid)) == 0)
+				continue;
+			nb_ports++;
+			nb_rxq += get_port_nb_rx_queues(portid);
+		}
+
+		nb_txq = nb_lcores;
+
+		nb_bufs_in_pool = RTE_MAX((nb_rxq*nb_rxd +
+					   nb_ports*nb_lcores*MAX_PKT_BURST +
+					   nb_ports*nb_txq*nb_txd +
+					   nb_lcores*MEMPOOL_CACHE_SIZE +
+					   nb_crypto_qp*CDEV_QUEUE_DESC),
+					  8192U);
+	}
+
 	for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
 		if (rte_lcore_is_enabled(lcore_id) == 0)
 			continue;
@@ -2678,11 +2716,12 @@ main(int32_t argc, char **argv)
 		if (socket_ctx[socket_id].mbuf_pool)
 			continue;
 
-		pool_init(&socket_ctx[socket_id], socket_id, NB_MBUF);
+		pool_init(&socket_ctx[socket_id], socket_id, nb_bufs_in_pool);
 		session_pool_init(&socket_ctx[socket_id], socket_id, sess_sz);
 		session_priv_pool_init(&socket_ctx[socket_id], socket_id,
 			sess_sz);
 	}
+	printf("Number of mbufs in packet pool %d\n", nb_bufs_in_pool);
 
 	RTE_ETH_FOREACH_DEV(portid) {
 		if ((enabled_port_mask & (1 << portid)) == 0)
@@ -2694,8 +2733,6 @@ main(int32_t argc, char **argv)
 				req_tx_offloads[portid]);
 	}
 
-	cryptodevs_init();
-
 	/*
 	 * Set the enabled port mask in helper config for use by helper
 	 * sub-system. This will be used while initializing devices using
-- 
2.7.4