DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] net/mlx5: fix validation of VXLAN/VXLAN-GPE specs
@ 2020-03-23 14:21 Raslan Darawsheh
  2020-03-23 16:21 ` Matan Azrad
  2020-03-24  9:23 ` Raslan Darawsheh
  0 siblings, 2 replies; 3+ messages in thread
From: Raslan Darawsheh @ 2020-03-23 14:21 UTC (permalink / raw)
  To: matan, viacheslavo; +Cc: dev, stable

Trying to create zero spec for vni wasn't allowed, to
avoid matching all packets from previous layer (udp).
This behavior is incorrect, since VXLAN is being identified
through the outer UDP destination port.

Currently, if the user didn't specify outer UDP destination
port the PMD will automatically match only on  outer
UDP port of 4798, and if the user want to match on some none
standard port he need to specify it explicitly in the rule.

This removes the limitation of vni spec to be able to match any
vni.

Fixes: 23c1d42c ("net/mlx5: split flow validation to dedicated function")
Cc: stable@dpdk.org

Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
---
 drivers/net/mlx5/mlx5_flow.c | 31 -------------------------------
 1 file changed, 31 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index 41072da..2ef6558 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -1836,7 +1836,6 @@ mlx5_flow_validate_item_vxlan(const struct rte_flow_item *item,
 		uint32_t vlan_id;
 		uint8_t vni[4];
 	} id = { .vlan_id = 0, };
-	uint32_t vlan_id = 0;
 
 
 	if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
@@ -1863,23 +1862,8 @@ mlx5_flow_validate_item_vxlan(const struct rte_flow_item *item,
 		return ret;
 	if (spec) {
 		memcpy(&id.vni[1], spec->vni, 3);
-		vlan_id = id.vlan_id;
 		memcpy(&id.vni[1], mask->vni, 3);
-		vlan_id &= id.vlan_id;
 	}
-	/*
-	 * Tunnel id 0 is equivalent as not adding a VXLAN layer, if
-	 * only this layer is defined in the Verbs specification it is
-	 * interpreted as wildcard and all packets will match this
-	 * rule, if it follows a full stack layer (ex: eth / ipv4 /
-	 * udp), all packets matching the layers before will also
-	 * match this rule.  To avoid such situation, VNI 0 is
-	 * currently refused.
-	 */
-	if (!vlan_id)
-		return rte_flow_error_set(error, ENOTSUP,
-					  RTE_FLOW_ERROR_TYPE_ITEM, item,
-					  "VXLAN vni cannot be 0");
 	if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
 		return rte_flow_error_set(error, ENOTSUP,
 					  RTE_FLOW_ERROR_TYPE_ITEM, item,
@@ -1918,7 +1902,6 @@ mlx5_flow_validate_item_vxlan_gpe(const struct rte_flow_item *item,
 		uint32_t vlan_id;
 		uint8_t vni[4];
 	} id = { .vlan_id = 0, };
-	uint32_t vlan_id = 0;
 
 	if (!priv->config.l3_vxlan_en)
 		return rte_flow_error_set(error, ENOTSUP,
@@ -1956,22 +1939,8 @@ mlx5_flow_validate_item_vxlan_gpe(const struct rte_flow_item *item,
 						  "VxLAN-GPE protocol"
 						  " not supported");
 		memcpy(&id.vni[1], spec->vni, 3);
-		vlan_id = id.vlan_id;
 		memcpy(&id.vni[1], mask->vni, 3);
-		vlan_id &= id.vlan_id;
 	}
-	/*
-	 * Tunnel id 0 is equivalent as not adding a VXLAN layer, if only this
-	 * layer is defined in the Verbs specification it is interpreted as
-	 * wildcard and all packets will match this rule, if it follows a full
-	 * stack layer (ex: eth / ipv4 / udp), all packets matching the layers
-	 * before will also match this rule.  To avoid such situation, VNI 0
-	 * is currently refused.
-	 */
-	if (!vlan_id)
-		return rte_flow_error_set(error, ENOTSUP,
-					  RTE_FLOW_ERROR_TYPE_ITEM, item,
-					  "VXLAN-GPE vni cannot be 0");
 	if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
 		return rte_flow_error_set(error, ENOTSUP,
 					  RTE_FLOW_ERROR_TYPE_ITEM, item,
-- 
2.7.4


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2020-03-24  9:23 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-23 14:21 [dpdk-dev] [PATCH] net/mlx5: fix validation of VXLAN/VXLAN-GPE specs Raslan Darawsheh
2020-03-23 16:21 ` Matan Azrad
2020-03-24  9:23 ` Raslan Darawsheh

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).