DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC
@ 2020-03-29 20:18 Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 01/13] bbdev: add capability flag for filler bits inclusion in HARQ Nicolas Chautru
                   ` (12 more replies)
  0 siblings, 13 replies; 14+ messages in thread
From: Nicolas Chautru @ 2020-03-29 20:18 UTC (permalink / raw)
  To: dev; +Cc: Nicolas Chautru

Adding new baseband PMD for FPGA 5GNR FEC implementation. 
This used to be part of that serie https://patches.dpdk.org/project/dpdk/list/?series=9050
but now splitting here as suggested. 
The differental incremental patches are split based on logical 
functionality. 
Note the the first 2 commits are identical to the ones the serie above,
but are required for both series to build. 

Nic Chautru (2):
  bbdev: add capability flag for filler bits inclusion in HARQ
  bbdev: expose device HARQ buffer size at device level

Nicolas Chautru (11):
  drivers/baseband: add PMD for FPGA 5GNR FEC
  baseband/fpga_5gnr_fec: add register definition file
  baseband/fpga_5gnr_fec: add device info_get function
  baseband/fpga_5gnr_fec: add queue configuration
  baseband/fpga_5gnr_fec: add LDPC processing functions
  baseband/fpga_5gnr_fec: add HW error capture
  baseband/fpga_5gnr_fec: add debug functionality
  baseband/fpga_5gnr_fec: add configure function
  baseband/fpga_5gnr_fec: add harq loopback capability
  baseband/fpga_5gnr_fec: add interrupt support
  doc: add feature matrix table for bbdev devices

 .gitignore                                         |    1 +
 app/test-bbdev/Makefile                            |    3 +
 app/test-bbdev/meson.build                         |    3 +
 app/test-bbdev/test_bbdev_perf.c                   |   57 +
 config/common_base                                 |    5 +
 doc/guides/bbdevs/features/default.ini             |   16 +
 doc/guides/bbdevs/features/fpga_5gnr_fec.ini       |   11 +
 doc/guides/bbdevs/features/fpga_lte_fec.ini        |   10 +
 doc/guides/bbdevs/features/mbc.ini                 |   14 +
 doc/guides/bbdevs/features/null.ini                |    7 +
 doc/guides/bbdevs/features/turbo_sw.ini            |   11 +
 doc/guides/bbdevs/fpga_5gnr_fec.rst                |  297 +++
 doc/guides/bbdevs/index.rst                        |    2 +
 doc/guides/bbdevs/overview.rst                     |   15 +
 doc/guides/conf.py                                 |    5 +
 doc/guides/rel_notes/release_20_05.rst             |    5 +
 drivers/baseband/Makefile                          |    2 +
 drivers/baseband/fpga_5gnr_fec/Makefile            |   29 +
 drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h     |   74 +
 drivers/baseband/fpga_5gnr_fec/meson.build         |    6 +
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 2297 ++++++++++++++++++++
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h |  274 +++
 .../rte_pmd_bbdev_fpga_5gnr_fec_version.map        |   10 +
 drivers/baseband/meson.build                       |    2 +-
 drivers/baseband/turbo_sw/bbdev_turbo_software.c   |    2 +-
 lib/librte_bbdev/rte_bbdev.h                       |    4 +
 lib/librte_bbdev/rte_bbdev_op.h                    |   14 +-
 mk/rte.app.mk                                      |    1 +
 28 files changed, 3171 insertions(+), 6 deletions(-)
 create mode 100644 doc/guides/bbdevs/features/default.ini
 create mode 100644 doc/guides/bbdevs/features/fpga_5gnr_fec.ini
 create mode 100644 doc/guides/bbdevs/features/fpga_lte_fec.ini
 create mode 100644 doc/guides/bbdevs/features/mbc.ini
 create mode 100644 doc/guides/bbdevs/features/null.ini
 create mode 100644 doc/guides/bbdevs/features/turbo_sw.ini
 create mode 100644 doc/guides/bbdevs/fpga_5gnr_fec.rst
 create mode 100644 doc/guides/bbdevs/overview.rst
 create mode 100644 drivers/baseband/fpga_5gnr_fec/Makefile
 create mode 100644 drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
 create mode 100644 drivers/baseband/fpga_5gnr_fec/meson.build
 create mode 100644 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
 create mode 100644 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
 create mode 100644 drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map

-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [dpdk-dev] [PATCH v1 01/13] bbdev: add capability flag for filler bits inclusion in HARQ
  2020-03-29 20:18 [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
@ 2020-03-29 20:18 ` Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 02/13] bbdev: expose device HARQ buffer size at device level Nicolas Chautru
                   ` (11 subsequent siblings)
  12 siblings, 0 replies; 14+ messages in thread
From: Nicolas Chautru @ 2020-03-29 20:18 UTC (permalink / raw)
  To: dev; +Cc: Nic Chautru

From: Nic Chautru <nicolas.chautru@intel.com>

Adding capability flag for device variants when HARQ buffer
may or may not include the filler bits.
Minor cosmetic changes in same file.

Signed-off-by: Nic Chautru <nicolas.chautru@intel.com>
---
 lib/librte_bbdev/rte_bbdev.h    |  2 ++
 lib/librte_bbdev/rte_bbdev_op.h | 12 ++++++++++--
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/lib/librte_bbdev/rte_bbdev.h b/lib/librte_bbdev/rte_bbdev.h
index 591fb79..b2da190 100644
--- a/lib/librte_bbdev/rte_bbdev.h
+++ b/lib/librte_bbdev/rte_bbdev.h
@@ -607,6 +607,7 @@ struct __rte_cache_aligned rte_bbdev {
  * @param ops
  *   Pointer array where operations will be dequeued to. Must have at least
  *   @p num_ops entries
+ *   ie. A pointer to a table of void * pointers (ops) that will be filled.
  * @param num_ops
  *   The maximum number of operations to dequeue.
  *
@@ -638,6 +639,7 @@ struct __rte_cache_aligned rte_bbdev {
  * @param ops
  *   Pointer array where operations will be dequeued to. Must have at least
  *   @p num_ops entries
+ *   ie. A pointer to a table of void * pointers (ops) that will be filled.
  * @param num_ops
  *   The maximum number of operations to dequeue.
  *
diff --git a/lib/librte_bbdev/rte_bbdev_op.h b/lib/librte_bbdev/rte_bbdev_op.h
index 1e119a7..c8a354e 100644
--- a/lib/librte_bbdev/rte_bbdev_op.h
+++ b/lib/librte_bbdev/rte_bbdev_op.h
@@ -31,8 +31,11 @@
 #define RTE_BBDEV_TURBO_MAX_TB_SIZE (391656)
 /* Maximum size of Code Block (36.212, Table 5.1.3-3) */
 #define RTE_BBDEV_TURBO_MAX_CB_SIZE (6144)
-/* Maximum size of Code Block  */
+/* Maximum size of Code Block */
 #define RTE_BBDEV_LDPC_MAX_CB_SIZE (8448)
+/* Minimum size of Code Block */
+#define RTE_BBDEV_LDPC_MIN_CB_SIZE (40)
+
 /* Minimum size of Code Block (36.212, Table 5.1.3-3) */
 #define RTE_BBDEV_TURBO_MIN_CB_SIZE (40)
 /* Maximum size of circular buffer */
@@ -177,7 +180,12 @@ enum rte_bbdev_op_ldpcdec_flag_bitmasks {
 	/** Set if a device supports loop-back access to
 	 *  HARQ internal memory. Intended for troubleshooting.
 	 */
-	RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK = (1ULL << 17)
+	RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK = (1ULL << 17),
+	/** Set if a device includes LLR filler bits in the circular buffer
+	 *  for HARQ memory. If not set, it is assumed the filler bits are not
+	 *  in HARQ memory and handled directly by the LDPC decoder.
+	 */
+	RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_FILLERS = (1ULL << 18)
 };
 
 /** Flags for LDPC encoder operation and capability structure */
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [dpdk-dev] [PATCH v1 02/13] bbdev: expose device HARQ buffer size at device level
  2020-03-29 20:18 [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 01/13] bbdev: add capability flag for filler bits inclusion in HARQ Nicolas Chautru
@ 2020-03-29 20:18 ` Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 03/13] drivers/baseband: add PMD for FPGA 5GNR FEC Nicolas Chautru
                   ` (10 subsequent siblings)
  12 siblings, 0 replies; 14+ messages in thread
From: Nicolas Chautru @ 2020-03-29 20:18 UTC (permalink / raw)
  To: dev; +Cc: Nic Chautru

From: Nic Chautru <nicolas.chautru@intel.com>

This exposes the HARQ buffer size at the device driver level
instead of using the capability of a specific operation.

This is currently not yet used by a device until
future commit.

Signed-off-by: Nic Chautru <nicolas.chautru@intel.com>
---
 drivers/baseband/turbo_sw/bbdev_turbo_software.c | 2 +-
 lib/librte_bbdev/rte_bbdev.h                     | 2 ++
 lib/librte_bbdev/rte_bbdev_op.h                  | 2 --
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/baseband/turbo_sw/bbdev_turbo_software.c b/drivers/baseband/turbo_sw/bbdev_turbo_software.c
index f2fe7a2..6d5e080 100644
--- a/drivers/baseband/turbo_sw/bbdev_turbo_software.c
+++ b/drivers/baseband/turbo_sw/bbdev_turbo_software.c
@@ -219,7 +219,6 @@ struct turbo_sw_queue {
 					RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE,
 			.llr_size = 8,
 			.llr_decimals = 2,
-			.harq_memory_size = 0,
 			.num_buffers_src =
 					RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
 			.num_buffers_hard_out =
@@ -251,6 +250,7 @@ struct turbo_sw_queue {
 	dev_info->default_queue_conf = default_queue_conf;
 	dev_info->capabilities = bbdev_capabilities;
 	dev_info->min_alignment = 64;
+	dev_info->harq_buffer_size = 0;
 
 	rte_bbdev_log_debug("got device info from %u\n", dev->data->dev_id);
 }
diff --git a/lib/librte_bbdev/rte_bbdev.h b/lib/librte_bbdev/rte_bbdev.h
index b2da190..38d9d50 100644
--- a/lib/librte_bbdev/rte_bbdev.h
+++ b/lib/librte_bbdev/rte_bbdev.h
@@ -307,6 +307,8 @@ struct rte_bbdev_driver_info {
 	bool queue_intr_supported;
 	/** Minimum alignment of buffers, in bytes */
 	uint16_t min_alignment;
+	/** HARQ memory available in kB */
+	uint32_t harq_buffer_size;
 	/** Default queue configuration used if none is supplied  */
 	struct rte_bbdev_queue_conf default_queue_conf;
 	/** Device operation capabilities */
diff --git a/lib/librte_bbdev/rte_bbdev_op.h b/lib/librte_bbdev/rte_bbdev_op.h
index c8a354e..80f3934 100644
--- a/lib/librte_bbdev/rte_bbdev_op.h
+++ b/lib/librte_bbdev/rte_bbdev_op.h
@@ -712,8 +712,6 @@ struct rte_bbdev_op_cap_ldpc_dec {
 	int8_t llr_size;
 	/** LLR numbers of decimals bit for arithmetic representation */
 	int8_t llr_decimals;
-	/** Amount of memory for HARQ in external DDR in MB */
-	uint16_t harq_memory_size;
 	/** Num input code block buffers */
 	uint16_t num_buffers_src;
 	/** Num hard output code block buffers */
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [dpdk-dev] [PATCH v1 03/13] drivers/baseband: add PMD for FPGA 5GNR FEC
  2020-03-29 20:18 [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 01/13] bbdev: add capability flag for filler bits inclusion in HARQ Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 02/13] bbdev: expose device HARQ buffer size at device level Nicolas Chautru
@ 2020-03-29 20:18 ` Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 04/13] baseband/fpga_5gnr_fec: add register definition file Nicolas Chautru
                   ` (9 subsequent siblings)
  12 siblings, 0 replies; 14+ messages in thread
From: Nicolas Chautru @ 2020-03-29 20:18 UTC (permalink / raw)
  To: dev; +Cc: Nicolas Chautru

Add stubs for the FPGA 5GNR FEC PMD

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 config/common_base                                 |   5 +
 doc/guides/bbdevs/fpga_5gnr_fec.rst                | 146 ++++++++++++++++
 doc/guides/bbdevs/index.rst                        |   1 +
 doc/guides/rel_notes/release_20_05.rst             |   5 +
 drivers/baseband/Makefile                          |   2 +
 drivers/baseband/fpga_5gnr_fec/Makefile            |  26 +++
 drivers/baseband/fpga_5gnr_fec/meson.build         |   6 +
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 193 +++++++++++++++++++++
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h |  41 +++++
 .../rte_pmd_bbdev_fpga_5gnr_fec_version.map        |   3 +
 drivers/baseband/meson.build                       |   2 +-
 mk/rte.app.mk                                      |   1 +
 12 files changed, 430 insertions(+), 1 deletion(-)
 create mode 100644 doc/guides/bbdevs/fpga_5gnr_fec.rst
 create mode 100644 drivers/baseband/fpga_5gnr_fec/Makefile
 create mode 100644 drivers/baseband/fpga_5gnr_fec/meson.build
 create mode 100644 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
 create mode 100644 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
 create mode 100644 drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map

diff --git a/config/common_base b/config/common_base
index c31175f..9ec689d 100644
--- a/config/common_base
+++ b/config/common_base
@@ -577,6 +577,11 @@ CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
 CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
 
 #
+# Compile PMD for Intel FPGA 5GNR FEC bbdev device
+#
+CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC=y
+
+#
 # Compile generic crypto device library
 #
 CONFIG_RTE_LIBRTE_CRYPTODEV=y
diff --git a/doc/guides/bbdevs/fpga_5gnr_fec.rst b/doc/guides/bbdevs/fpga_5gnr_fec.rst
new file mode 100644
index 0000000..007ace0
--- /dev/null
+++ b/doc/guides/bbdevs/fpga_5gnr_fec.rst
@@ -0,0 +1,146 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2019 Intel Corporation
+
+Intel(R) FPGA 5GNR FEC Poll Mode Driver
+======================================
+
+The BBDEV FPGA 5GNR FEC poll mode driver (PMD) supports an FPGA implementation of a VRAN
+LDPC Encode / Decode 5GNR wireless acceleration function, using Intel's PCI-e and FPGA
+based Vista Creek device.
+
+Features
+--------
+
+FPGA 5GNR FEC PMD supports the following features:
+
+- 8 VFs per PF (physical device)
+- Maximum of 32 UL queues per VF
+- Maximum of 32 DL queues per VF
+- PCIe Gen-3 x8 Interface
+- MSI-X
+- SR-IOV
+
+Limitations
+-----------
+
+FPGA 5GNR FEC does not support the following:
+
+- Scatter-Gather function
+
+
+Installation
+--------------
+
+Section 3 of the DPDK manual provides instuctions on installing and compiling DPDK. The
+default set of bbdev compile flags may be found in config/common_base, where for example
+the flag to build the FPGA 5GNR FEC device, ``CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC``,
+is already set. It is assumed DPDK has been compiled using for instance:
+
+.. code-block:: console
+
+  make install T=x86_64-native-linuxapp-gcc
+
+
+DPDK requires hugepages to be configured as detailed in section 2 of the DPDK manual.
+The bbdev test application has been tested with a configuration 40 x 1GB hugepages. The
+hugepage configuration of a server may be examined using:
+
+.. code-block:: console
+
+   grep Huge* /proc/meminfo
+
+
+Initialization
+--------------
+
+When the device first powers up, its PCI Physical Functions (PF) can be listed through this command:
+
+.. code-block:: console
+
+  sudo lspci -vd8086:0d8f
+
+The physical and virtual functions are compatible with Linux UIO drivers:
+``vfio`` and ``igb_uio``. However, in order to work the FPGA 5GNR FEC device firstly needs
+to be bound to one of these linux drivers through DPDK.
+
+
+Bind PF UIO driver(s)
+~~~~~~~~~~~~~~~~~~~~~
+
+Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use
+``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver.
+
+The igb_uio driver may be bound to the PF PCI device using one of three methods:
+
+
+1. PCI functions (physical or virtual, depending on the use case) can be bound to
+the UIO driver by repeating this command for every function.
+
+.. code-block:: console
+
+  cd <dpdk-top-level-directory>
+  insmod ./build/kmod/igb_uio.ko
+  echo "8086 0d8f" > /sys/bus/pci/drivers/igb_uio/new_id
+  lspci -vd8086:0d8f
+
+
+2. Another way to bind PF with DPDK UIO driver is by using the ``dpdk-devbind.py`` tool
+
+.. code-block:: console
+
+  cd <dpdk-top-level-directory>
+  ./usertools/dpdk-devbind.py -b igb_uio 0000:06:00.0
+
+where the PCI device ID (example: 0000:06:00.0) is obtained using lspci -vd8086:0d8f
+
+
+3. A third way to bind is to use ``dpdk-setup.sh`` tool
+
+.. code-block:: console
+
+  cd <dpdk-top-level-directory>
+  ./usertools/dpdk-setup.sh
+
+  select 'Bind Ethernet/Crypto/Baseband device to IGB UIO module'
+  or
+  select 'Bind Ethernet/Crypto/Baseband device to VFIO module' depending on driver required
+  enter PCI device ID
+  select 'Display current Ethernet/Crypto/Baseband device settings' to confirm binding
+
+
+In the same way the FPGA 5GNR FEC PF can be bound with vfio, but vfio driver does not
+support SR-IOV configuration right out of the box, so it will need to be patched.
+
+
+Enable Virtual Functions
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Now, it should be visible in the printouts that PCI PF is under igb_uio control
+"``Kernel driver in use: igb_uio``"
+
+To show the number of available VFs on the device, read ``sriov_totalvfs`` file..
+
+.. code-block:: console
+
+  cat /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/sriov_totalvfs
+
+  where 0000\:<b>\:<d>.<f> is the PCI device ID
+
+
+To enable VFs via igb_uio, echo the number of virtual functions intended to
+enable to ``max_vfs`` file..
+
+.. code-block:: console
+
+  echo <num-of-vfs> > /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/max_vfs
+
+
+Afterwards, all VFs must be bound to appropriate UIO drivers as required, same
+way it was done with the physical function previously.
+
+Enabling SR-IOV via vfio driver is pretty much the same, except that the file
+name is different:
+
+.. code-block:: console
+
+  echo <num-of-vfs> > /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/sriov_numvfs
diff --git a/doc/guides/bbdevs/index.rst b/doc/guides/bbdevs/index.rst
index 005b95e..1a79343 100644
--- a/doc/guides/bbdevs/index.rst
+++ b/doc/guides/bbdevs/index.rst
@@ -11,3 +11,4 @@ Baseband Device Drivers
     null
     turbo_sw
     fpga_lte_fec
+    fpga_5gnr_fec
diff --git a/doc/guides/rel_notes/release_20_05.rst b/doc/guides/rel_notes/release_20_05.rst
index 1dfcfcc..e76b50c 100644
--- a/doc/guides/rel_notes/release_20_05.rst
+++ b/doc/guides/rel_notes/release_20_05.rst
@@ -70,6 +70,11 @@ New Features
   by making use of the event device capabilities. The event mode currently supports
   only inline IPsec protocol offload.
 
+* **Added Intel FPGA_5GNR_FEC bbdev PMD.**
+
+  Added a new ``fpga_5gnr_fec`` bbdev driver for the Intel\ |reg| FPGA PAC
+  (Programmable  Acceleration Card) N3000.  See the
+  :doc:`../bbdevs/fpga_5gnr_fec` BBDEV guide for more details on this new driver.
 
 Removed Items
 -------------
diff --git a/drivers/baseband/Makefile b/drivers/baseband/Makefile
index 91048be..dcc0969 100644
--- a/drivers/baseband/Makefile
+++ b/drivers/baseband/Makefile
@@ -12,5 +12,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW) += turbo_sw
 DEPDIRS-turbo_sw = $(core-libs)
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC) += fpga_lte_fec
 DEPDIRS-fpga_lte_fec = $(core-libs)
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC) += fpga_5gnr_fec
+DEPDIRS-fpga_5gnr_fec = $(core-libs)
 
 include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/drivers/baseband/fpga_5gnr_fec/Makefile b/drivers/baseband/fpga_5gnr_fec/Makefile
new file mode 100644
index 0000000..3f5c511
--- /dev/null
+++ b/drivers/baseband/fpga_5gnr_fec/Makefile
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2019 Intel Corporation
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_pmd_bbdev_fpga_5gnr_fec.a
+
+# build flags
+CFLAGS += -DALLOW_EXPERIMENTAL_API
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
+LDLIBS += -lrte_bbdev
+LDLIBS += -lrte_pci -lrte_bus_pci
+
+# versioning export map
+EXPORT_MAP := rte_pmd_bbdev_fpga_5gnr_fec_version.map
+
+# library version
+LIBABIVER := 1
+
+# library source files
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC) += rte_fpga_5gnr_fec.c
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/baseband/fpga_5gnr_fec/meson.build b/drivers/baseband/fpga_5gnr_fec/meson.build
new file mode 100644
index 0000000..c148ea9
--- /dev/null
+++ b/drivers/baseband/fpga_5gnr_fec/meson.build
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2020 Intel Corporation
+
+deps += ['bbdev', 'bus_vdev', 'ring', 'pci', 'bus_pci']
+allow_experimental_apis = true
+sources = files('rte_fpga_5gnr_fec.c')
diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
new file mode 100644
index 0000000..ee9577d
--- /dev/null
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
@@ -0,0 +1,193 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+#include <unistd.h>
+
+#include <rte_common.h>
+#include <rte_log.h>
+#include <rte_dev.h>
+#include <rte_malloc.h>
+#include <rte_mempool.h>
+#include <rte_errno.h>
+#include <rte_pci.h>
+#include <rte_bus_pci.h>
+#include <rte_byteorder.h>
+
+#include <rte_bbdev.h>
+#include <rte_bbdev_pmd.h>
+
+#include "rte_fpga_5gnr_fec.h"
+
+/* 5GNR SW PMD logging ID */
+static int fpga_5gnr_fec_logtype;
+
+static int
+fpga_dev_close(struct rte_bbdev *dev __rte_unused)
+{
+	return 0;
+}
+
+static const struct rte_bbdev_ops fpga_ops = {
+	.close = fpga_dev_close,
+};
+
+/* Initialization Function */
+static void
+fpga_5gnr_fec_init(struct rte_bbdev *dev, struct rte_pci_driver *drv)
+{
+	struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(dev->device);
+
+	dev->dev_ops = &fpga_ops;
+
+	((struct fpga_5gnr_fec_device *) dev->data->dev_private)->pf_device =
+			!strcmp(drv->driver.name,
+					RTE_STR(FPGA_5GNR_FEC_PF_DRIVER_NAME));
+	((struct fpga_5gnr_fec_device *) dev->data->dev_private)->mmio_base =
+			pci_dev->mem_resource[0].addr;
+
+	rte_bbdev_log_debug(
+			"Init device %s [%s] @ virtaddr %p phyaddr %#"PRIx64,
+			dev->device->driver->name, dev->data->name,
+			(void *)pci_dev->mem_resource[0].addr,
+			pci_dev->mem_resource[0].phys_addr);
+}
+
+static int
+fpga_5gnr_fec_probe(struct rte_pci_driver *pci_drv,
+	struct rte_pci_device *pci_dev)
+{
+	struct rte_bbdev *bbdev = NULL;
+	char dev_name[RTE_BBDEV_NAME_MAX_LEN];
+
+	if (pci_dev == NULL) {
+		rte_bbdev_log(ERR, "NULL PCI device");
+		return -EINVAL;
+	}
+
+	rte_pci_device_name(&pci_dev->addr, dev_name, sizeof(dev_name));
+
+	/* Allocate memory to be used privately by drivers */
+	bbdev = rte_bbdev_allocate(pci_dev->device.name);
+	if (bbdev == NULL)
+		return -ENODEV;
+
+	/* allocate device private memory */
+	bbdev->data->dev_private = rte_zmalloc_socket(dev_name,
+			sizeof(struct fpga_5gnr_fec_device),
+			RTE_CACHE_LINE_SIZE,
+			pci_dev->device.numa_node);
+
+	if (bbdev->data->dev_private == NULL) {
+		rte_bbdev_log(CRIT,
+				"Allocate of %zu bytes for device \"%s\" failed",
+				sizeof(struct fpga_5gnr_fec_device), dev_name);
+				rte_bbdev_release(bbdev);
+			return -ENOMEM;
+	}
+
+	/* Fill HW specific part of device structure */
+	bbdev->device = &pci_dev->device;
+	bbdev->intr_handle = &pci_dev->intr_handle;
+	bbdev->data->socket_id = pci_dev->device.numa_node;
+
+	/* Invoke FEC FPGA device initialization function */
+	fpga_5gnr_fec_init(bbdev, pci_drv);
+
+	rte_bbdev_log_debug("bbdev id = %u [%s]",
+			bbdev->data->dev_id, dev_name);
+
+	return 0;
+}
+
+static int
+fpga_5gnr_fec_remove(struct rte_pci_device *pci_dev)
+{
+	struct rte_bbdev *bbdev;
+	int ret;
+	uint8_t dev_id;
+
+	if (pci_dev == NULL)
+		return -EINVAL;
+
+	/* Find device */
+	bbdev = rte_bbdev_get_named_dev(pci_dev->device.name);
+	if (bbdev == NULL) {
+		rte_bbdev_log(CRIT,
+				"Couldn't find HW dev \"%s\" to uninitialise it",
+				pci_dev->device.name);
+		return -ENODEV;
+	}
+	dev_id = bbdev->data->dev_id;
+
+	/* free device private memory before close */
+	rte_free(bbdev->data->dev_private);
+
+	/* Close device */
+	ret = rte_bbdev_close(dev_id);
+	if (ret < 0)
+		rte_bbdev_log(ERR,
+				"Device %i failed to close during uninit: %i",
+				dev_id, ret);
+
+	/* release bbdev from library */
+	ret = rte_bbdev_release(bbdev);
+	if (ret)
+		rte_bbdev_log(ERR, "Device %i failed to uninit: %i", dev_id,
+				ret);
+
+	rte_bbdev_log_debug("Destroyed bbdev = %u", dev_id);
+
+	return 0;
+}
+
+/* FPGA 5GNR FEC PCI PF address map */
+static struct rte_pci_id pci_id_fpga_5gnr_fec_pf_map[] = {
+	{
+		RTE_PCI_DEVICE(FPGA_5GNR_FEC_VENDOR_ID,
+				FPGA_5GNR_FEC_PF_DEVICE_ID)
+	},
+	{.device_id = 0},
+};
+
+static struct rte_pci_driver fpga_5gnr_fec_pci_pf_driver = {
+	.probe = fpga_5gnr_fec_probe,
+	.remove = fpga_5gnr_fec_remove,
+	.id_table = pci_id_fpga_5gnr_fec_pf_map,
+	.drv_flags = RTE_PCI_DRV_NEED_MAPPING
+};
+
+/* FPGA 5GNR FEC PCI VF address map */
+static struct rte_pci_id pci_id_fpga_5gnr_fec_vf_map[] = {
+	{
+		RTE_PCI_DEVICE(FPGA_5GNR_FEC_VENDOR_ID,
+				FPGA_5GNR_FEC_VF_DEVICE_ID)
+	},
+	{.device_id = 0},
+};
+
+static struct rte_pci_driver fpga_5gnr_fec_pci_vf_driver = {
+	.probe = fpga_5gnr_fec_probe,
+	.remove = fpga_5gnr_fec_remove,
+	.id_table = pci_id_fpga_5gnr_fec_vf_map,
+	.drv_flags = RTE_PCI_DRV_NEED_MAPPING
+};
+
+
+RTE_PMD_REGISTER_PCI(FPGA_5GNR_FEC_PF_DRIVER_NAME, fpga_5gnr_fec_pci_pf_driver);
+RTE_PMD_REGISTER_PCI_TABLE(FPGA_5GNR_FEC_PF_DRIVER_NAME,
+		pci_id_fpga_5gnr_fec_pf_map);
+RTE_PMD_REGISTER_PCI(FPGA_5GNR_FEC_VF_DRIVER_NAME, fpga_5gnr_fec_pci_vf_driver);
+RTE_PMD_REGISTER_PCI_TABLE(FPGA_5GNR_FEC_VF_DRIVER_NAME,
+		pci_id_fpga_5gnr_fec_vf_map);
+
+RTE_INIT(fpga_5gnr_fec_init_log)
+{
+	fpga_5gnr_fec_logtype = rte_log_register("pmd.bb.fpga_5gnr_fec");
+	if (fpga_5gnr_fec_logtype >= 0)
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+		rte_log_set_level(fpga_5gnr_fec_logtype, RTE_LOG_DEBUG);
+#else
+		rte_log_set_level(fpga_5gnr_fec_logtype, RTE_LOG_NOTICE);
+#endif
+}
diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
new file mode 100644
index 0000000..aeb1e94
--- /dev/null
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+#ifndef _RTE_FPGA_5GNR_FEC_H_
+#define _RTE_FPGA_5GNR_FEC_H_
+
+#include <stdint.h>
+#include <stdbool.h>
+
+/* Helper macro for logging */
+#define rte_bbdev_log(level, fmt, ...) \
+	rte_log(RTE_LOG_ ## level, fpga_5gnr_fec_logtype, fmt "\n", \
+		##__VA_ARGS__)
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+#define rte_bbdev_log_debug(fmt, ...) \
+		rte_bbdev_log(DEBUG, "fpga_5gnr_fec: " fmt, \
+		##__VA_ARGS__)
+#else
+#define rte_bbdev_log_debug(fmt, ...)
+#endif
+
+/* FPGA 5GNR FEC driver names */
+#define FPGA_5GNR_FEC_PF_DRIVER_NAME intel_fpga_5gnr_fec_pf
+#define FPGA_5GNR_FEC_VF_DRIVER_NAME intel_fpga_5gnr_fec_vf
+
+/* FPGA 5GNR FEC PCI vendor & device IDs */
+#define FPGA_5GNR_FEC_VENDOR_ID (0x8086)
+#define FPGA_5GNR_FEC_PF_DEVICE_ID (0x0D8F)
+#define FPGA_5GNR_FEC_VF_DEVICE_ID (0x0D90)
+
+/* Private data structure for each FPGA FEC device */
+struct fpga_5gnr_fec_device {
+	/** Base address of MMIO registers (BAR0) */
+	void *mmio_base;
+	/** True if this is a PF FPGA FEC device */
+	bool pf_device;
+};
+
+#endif /* _RTE_FPGA_5GNR_FEC_H_ */
diff --git a/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map b/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map
new file mode 100644
index 0000000..f9f17e4
--- /dev/null
+++ b/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map
@@ -0,0 +1,3 @@
+DPDK_20.0 {
+	local: *;
+};
diff --git a/drivers/baseband/meson.build b/drivers/baseband/meson.build
index be7677f..4d909f9 100644
--- a/drivers/baseband/meson.build
+++ b/drivers/baseband/meson.build
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Luca Boccassi <bluca@debian.org>
 
-drivers = ['null', 'turbo_sw', 'fpga_lte_fec']
+drivers = ['null', 'turbo_sw', 'fpga_lte_fec', 'fpga_5gnr_fec']
 
 config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@'
 driver_name_fmt = 'rte_pmd_bbdev_@0@'
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index d295ca0..da12b9e 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -246,6 +246,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_NETVSC_PMD)     += -lrte_pmd_netvsc
 ifeq ($(CONFIG_RTE_LIBRTE_BBDEV),y)
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL)     += -lrte_pmd_bbdev_null
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC) += -lrte_pmd_bbdev_fpga_lte_fec
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC) += -lrte_pmd_bbdev_fpga_5gnr_fec
 
 # TURBO SOFTWARE PMD is dependent on the FLEXRAN library
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW) += -lrte_pmd_bbdev_turbo_sw
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [dpdk-dev] [PATCH v1 04/13] baseband/fpga_5gnr_fec: add register definition file
  2020-03-29 20:18 [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
                   ` (2 preceding siblings ...)
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 03/13] drivers/baseband: add PMD for FPGA 5GNR FEC Nicolas Chautru
@ 2020-03-29 20:18 ` Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 05/13] baseband/fpga_5gnr_fec: add device info_get function Nicolas Chautru
                   ` (8 subsequent siblings)
  12 siblings, 0 replies; 14+ messages in thread
From: Nicolas Chautru @ 2020-03-29 20:18 UTC (permalink / raw)
  To: dev; +Cc: Nicolas Chautru

Add in the list of registers for the device and related
HW specs definitions.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h | 189 +++++++++++++++++++++
 1 file changed, 189 insertions(+)

diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
index aeb1e94..b1416f6 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
@@ -30,6 +30,195 @@
 #define FPGA_5GNR_FEC_PF_DEVICE_ID (0x0D8F)
 #define FPGA_5GNR_FEC_VF_DEVICE_ID (0x0D90)
 
+/* Align DMA descriptors to 256 bytes - cache-aligned */
+#define FPGA_RING_DESC_ENTRY_LENGTH (8)
+/* Ring size is in 256 bits (32 bytes) units */
+#define FPGA_RING_DESC_LEN_UNIT_BYTES (32)
+/* Maximum size of queue */
+#define FPGA_RING_MAX_SIZE (1024)
+#define FPGA_FLR_TIMEOUT_UNIT (16.384)
+
+#define FPGA_NUM_UL_QUEUES (32)
+#define FPGA_NUM_DL_QUEUES (32)
+#define FPGA_TOTAL_NUM_QUEUES (FPGA_NUM_UL_QUEUES + FPGA_NUM_DL_QUEUES)
+#define FPGA_NUM_INTR_VEC (FPGA_TOTAL_NUM_QUEUES - RTE_INTR_VEC_RXTX_OFFSET)
+
+#define FPGA_INVALID_HW_QUEUE_ID (0xFFFFFFFF)
+
+#define FPGA_QUEUE_FLUSH_TIMEOUT_US (1000)
+#define FPGA_HARQ_RDY_TIMEOUT (10)
+#define FPGA_TIMEOUT_CHECK_INTERVAL (5)
+#define FPGA_DDR_OVERFLOW (0x10)
+
+#define FPGA_5GNR_FEC_DDR_WR_DATA_LEN_IN_BYTES 8
+#define FPGA_5GNR_FEC_DDR_RD_DATA_LEN_IN_BYTES 8
+
+
+/* FPGA 5GNR FEC Register mapping on BAR0 */
+enum {
+	FPGA_5GNR_FEC_VERSION_ID = 0x00000000, /* len: 4B */
+	FPGA_5GNR_FEC_CONFIGURATION = 0x00000004, /* len: 2B */
+	FPGA_5GNR_FEC_QUEUE_PF_VF_MAP_DONE = 0x00000008, /* len: 1B */
+	FPGA_5GNR_FEC_LOAD_BALANCE_FACTOR = 0x0000000a, /* len: 2B */
+	FPGA_5GNR_FEC_RING_DESC_LEN = 0x0000000c, /* len: 2B */
+	FPGA_5GNR_FEC_FLR_TIME_OUT = 0x0000000e, /* len: 2B */
+	FPGA_5GNR_FEC_VFQ_FLUSH_STATUS_LW = 0x00000018, /* len: 4B */
+	FPGA_5GNR_FEC_VFQ_FLUSH_STATUS_HI = 0x0000001c, /* len: 4B */
+	FPGA_5GNR_FEC_QUEUE_MAP = 0x00000040, /* len: 256B */
+	FPGA_5GNR_FEC_RING_CTRL_REGS = 0x00000200, /* len: 2048B */
+	FPGA_5GNR_FEC_DDR4_WR_ADDR_REGS = 0x00000A00, /* len: 4B */
+	FPGA_5GNR_FEC_DDR4_WR_DATA_REGS = 0x00000A08, /* len: 8B */
+	FPGA_5GNR_FEC_DDR4_WR_DONE_REGS = 0x00000A10, /* len: 1B */
+	FPGA_5GNR_FEC_DDR4_RD_ADDR_REGS = 0x00000A18, /* len: 4B */
+	FPGA_5GNR_FEC_DDR4_RD_DONE_REGS = 0x00000A20, /* len: 1B */
+	FPGA_5GNR_FEC_DDR4_RD_RDY_REGS = 0x00000A28, /* len: 1B */
+	FPGA_5GNR_FEC_DDR4_RD_DATA_REGS = 0x00000A30, /* len: 8B */
+	FPGA_5GNR_FEC_DDR4_ADDR_RDY_REGS = 0x00000A38, /* len: 1B */
+	FPGA_5GNR_FEC_HARQ_BUF_SIZE_RDY_REGS = 0x00000A40, /* len: 1B */
+	FPGA_5GNR_FEC_HARQ_BUF_SIZE_REGS = 0x00000A48  /* len: 4B */
+};
+
+/* FPGA 5GNR FEC Ring Control Registers */
+enum {
+	FPGA_5GNR_FEC_RING_HEAD_ADDR = 0x00000008,
+	FPGA_5GNR_FEC_RING_SIZE = 0x00000010,
+	FPGA_5GNR_FEC_RING_MISC = 0x00000014,
+	FPGA_5GNR_FEC_RING_ENABLE = 0x00000015,
+	FPGA_5GNR_FEC_RING_FLUSH_QUEUE_EN = 0x00000016,
+	FPGA_5GNR_FEC_RING_SHADOW_TAIL = 0x00000018,
+	FPGA_5GNR_FEC_RING_HEAD_POINT = 0x0000001C
+};
+
+/* FPGA 5GNR FEC DESCRIPTOR ERROR */
+enum {
+	DESC_ERR_NO_ERR = 0x0,
+	DESC_ERR_K_P_OUT_OF_RANGE = 0x1,
+	DESC_ERR_Z_C_NOT_LEGAL = 0x2,
+	DESC_ERR_DESC_OFFSET_ERR = 0x3,
+	DESC_ERR_DESC_READ_FAIL = 0x8,
+	DESC_ERR_DESC_READ_TIMEOUT = 0x9,
+	DESC_ERR_DESC_READ_TLP_POISONED = 0xA,
+	DESC_ERR_CB_READ_FAIL = 0xC,
+	DESC_ERR_CB_READ_TIMEOUT = 0xD,
+	DESC_ERR_CB_READ_TLP_POISONED = 0xE,
+	DESC_ERR_HBSTORE_ERR = 0xF
+};
+
+
+/* FPGA 5GNR FEC DMA Encoding Request Descriptor */
+struct __attribute__((__packed__)) fpga_dma_enc_desc {
+	uint32_t done:1,
+		rsrvd0:7,
+		error:4,
+		rsrvd1:4,
+		num_null:10,
+		rsrvd2:6;
+	uint32_t ncb:15,
+		rsrvd3:1,
+		k0:16;
+	uint32_t irq_en:1,
+		crc_en:1,
+		rsrvd4:1,
+		qm_idx:3,
+		bg_idx:1,
+		zc:9,
+		desc_idx:10,
+		rsrvd5:6;
+	uint16_t rm_e;
+	uint16_t k_;
+	uint32_t out_addr_lw;
+	uint32_t out_addr_hi;
+	uint32_t in_addr_lw;
+	uint32_t in_addr_hi;
+
+	union {
+		struct {
+			/* Virtual addresses used to retrieve SW context info */
+			void *op_addr;
+			/* Stores information about total number of Code Blocks
+			 * in currently processed Transport Block
+			 */
+			uint64_t cbs_in_op;
+		};
+
+		uint8_t sw_ctxt[FPGA_RING_DESC_LEN_UNIT_BYTES *
+					(FPGA_RING_DESC_ENTRY_LENGTH - 1)];
+	};
+};
+
+
+/* FPGA 5GNR DPC FEC DMA Decoding Request Descriptor */
+struct __attribute__((__packed__)) fpga_dma_dec_desc {
+	uint32_t done:1,
+		iter:5,
+		et_pass:1,
+		crcb_pass:1,
+		error:4,
+		qm_idx:3,
+		max_iter:5,
+		bg_idx:1,
+		rsrvd0:1,
+		harqin_en:1,
+		zc:9;
+	uint32_t hbstroe_offset:22,
+		num_null:10;
+	uint32_t irq_en:1,
+		ncb:15,
+		desc_idx:10,
+		drop_crc24b:1,
+		crc24b_ind:1,
+		rv:2,
+		et_dis:1,
+		rsrvd2:1;
+	uint32_t harq_input_length:16,
+		rm_e:16;/*the inbound data byte length*/
+	uint32_t out_addr_lw;
+	uint32_t out_addr_hi;
+	uint32_t in_addr_lw;
+	uint32_t in_addr_hi;
+
+	union {
+		struct {
+			/* Virtual addresses used to retrieve SW context info */
+			void *op_addr;
+			/* Stores information about total number of Code Blocks
+			 * in currently processed Transport Block
+			 */
+			uint8_t cbs_in_op;
+		};
+
+		uint32_t sw_ctxt[8 * (FPGA_RING_DESC_ENTRY_LENGTH - 1)];
+	};
+};
+
+/* FPGA 5GNR DMA Descriptor */
+union fpga_dma_desc {
+	struct fpga_dma_enc_desc enc_req;
+	struct fpga_dma_dec_desc dec_req;
+};
+
+/* FPGA 5GNR FEC Ring Control Register */
+struct __attribute__((__packed__)) fpga_ring_ctrl_reg {
+	uint64_t ring_base_addr;
+	uint64_t ring_head_addr;
+	uint16_t ring_size:11;
+	uint16_t rsrvd0;
+	union { /* Miscellaneous register */
+		uint8_t misc;
+		uint8_t max_ul_dec:5,
+			max_ul_dec_en:1,
+			rsrvd1:2;
+	};
+	uint8_t enable;
+	uint8_t flush_queue_en;
+	uint8_t rsrvd2;
+	uint16_t shadow_tail;
+	uint16_t rsrvd3;
+	uint16_t head_point;
+	uint16_t rsrvd4;
+
+};
+
 /* Private data structure for each FPGA FEC device */
 struct fpga_5gnr_fec_device {
 	/** Base address of MMIO registers (BAR0) */
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [dpdk-dev] [PATCH v1 05/13] baseband/fpga_5gnr_fec: add device info_get function
  2020-03-29 20:18 [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
                   ` (3 preceding siblings ...)
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 04/13] baseband/fpga_5gnr_fec: add register definition file Nicolas Chautru
@ 2020-03-29 20:18 ` Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 06/13] baseband/fpga_5gnr_fec: add queue configuration Nicolas Chautru
                   ` (7 subsequent siblings)
  12 siblings, 0 replies; 14+ messages in thread
From: Nicolas Chautru @ 2020-03-29 20:18 UTC (permalink / raw)
  To: dev; +Cc: Nicolas Chautru

Add in the "info_get" function to the driver, to allow us to query the
device.
No capability are available yet.
Linking bbdev-test to support the PMD with null capability.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 app/test-bbdev/Makefile                            |  3 ++
 app/test-bbdev/meson.build                         |  3 ++
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 62 ++++++++++++++++++++++
 3 files changed, 68 insertions(+)

diff --git a/app/test-bbdev/Makefile b/app/test-bbdev/Makefile
index c53982f..e951302 100644
--- a/app/test-bbdev/Makefile
+++ b/app/test-bbdev/Makefile
@@ -24,5 +24,8 @@ LDLIBS += -lm
 ifeq ($(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC),y)
 LDLIBS += -lrte_pmd_bbdev_fpga_lte_fec
 endif
+ifeq ($(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC),y)
+LDLIBS += -lrte_pmd_bbdev_fpga_5gnr_fec
+endif
 
 include $(RTE_SDK)/mk/rte.app.mk
diff --git a/app/test-bbdev/meson.build b/app/test-bbdev/meson.build
index 4f53a2e..e57e019 100644
--- a/app/test-bbdev/meson.build
+++ b/app/test-bbdev/meson.build
@@ -10,3 +10,6 @@ deps += ['bbdev', 'bus_vdev']
 if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC')
 	deps += ['pmd_bbdev_fpga_lte_fec']
 endif
+if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC')
+	deps += ['pmd_bbdev_fpga_5gnr_fec']
+endif
\ No newline at end of file
diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
index ee9577d..595107e 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
@@ -22,14 +22,76 @@
 /* 5GNR SW PMD logging ID */
 static int fpga_5gnr_fec_logtype;
 
+/* Read a register of FPGA 5GNR FEC device */
+static uint32_t
+fpga_reg_read_32(void *mmio_base, uint32_t offset)
+{
+	void *reg_addr = RTE_PTR_ADD(mmio_base, offset);
+	uint32_t ret = *((volatile uint32_t *)(reg_addr));
+	return rte_le_to_cpu_32(ret);
+}
+
 static int
 fpga_dev_close(struct rte_bbdev *dev __rte_unused)
 {
 	return 0;
 }
 
+static void
+fpga_dev_info_get(struct rte_bbdev *dev,
+		struct rte_bbdev_driver_info *dev_info)
+{
+	struct fpga_5gnr_fec_device *d = dev->data->dev_private;
+	uint32_t q_id = 0;
+
+	static const struct rte_bbdev_op_cap bbdev_capabilities[] = {
+		RTE_BBDEV_END_OF_CAPABILITIES_LIST()
+	};
+
+	/* Check the HARQ DDR size available */
+	uint8_t timeout_counter = 0;
+	uint32_t harq_buf_ready = fpga_reg_read_32(d->mmio_base,
+			FPGA_5GNR_FEC_HARQ_BUF_SIZE_RDY_REGS);
+	while (harq_buf_ready != 1) {
+		usleep(FPGA_TIMEOUT_CHECK_INTERVAL);
+		timeout_counter++;
+		harq_buf_ready = fpga_reg_read_32(d->mmio_base,
+				FPGA_5GNR_FEC_HARQ_BUF_SIZE_RDY_REGS);
+		if (timeout_counter > FPGA_HARQ_RDY_TIMEOUT) {
+			rte_bbdev_log(ERR, "HARQ Buffer not ready %d",
+					harq_buf_ready);
+			harq_buf_ready = 1;
+		}
+	}
+	uint32_t harq_buf_size = fpga_reg_read_32(d->mmio_base,
+			FPGA_5GNR_FEC_HARQ_BUF_SIZE_REGS);
+
+	static struct rte_bbdev_queue_conf default_queue_conf;
+	default_queue_conf.socket = dev->data->socket_id;
+	default_queue_conf.queue_size = FPGA_RING_MAX_SIZE;
+
+	dev_info->driver_name = dev->device->driver->name;
+	dev_info->queue_size_lim = FPGA_RING_MAX_SIZE;
+	dev_info->hardware_accelerated = true;
+	dev_info->min_alignment = 64;
+	dev_info->harq_buffer_size = (harq_buf_size >> 10) + 1;
+	dev_info->default_queue_conf = default_queue_conf;
+	dev_info->capabilities = bbdev_capabilities;
+	dev_info->cpu_flag_reqs = NULL;
+
+	/* Calculates number of queues assigned to device */
+	dev_info->max_num_queues = 0;
+	for (q_id = 0; q_id < FPGA_TOTAL_NUM_QUEUES; ++q_id) {
+		uint32_t hw_q_id = fpga_reg_read_32(d->mmio_base,
+				FPGA_5GNR_FEC_QUEUE_MAP + (q_id << 2));
+		if (hw_q_id != FPGA_INVALID_HW_QUEUE_ID)
+			dev_info->max_num_queues++;
+	}
+}
+
 static const struct rte_bbdev_ops fpga_ops = {
 	.close = fpga_dev_close,
+	.info_get = fpga_dev_info_get,
 };
 
 /* Initialization Function */
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [dpdk-dev] [PATCH v1 06/13] baseband/fpga_5gnr_fec: add queue configuration
  2020-03-29 20:18 [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
                   ` (4 preceding siblings ...)
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 05/13] baseband/fpga_5gnr_fec: add device info_get function Nicolas Chautru
@ 2020-03-29 20:18 ` Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 07/13] baseband/fpga_5gnr_fec: add LDPC processing functions Nicolas Chautru
                   ` (6 subsequent siblings)
  12 siblings, 0 replies; 14+ messages in thread
From: Nicolas Chautru @ 2020-03-29 20:18 UTC (permalink / raw)
  To: dev; +Cc: Nicolas Chautru

Adding function to create and configure queues for
the device. Still no capability.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 441 ++++++++++++++++++++-
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h |  35 ++
 2 files changed, 475 insertions(+), 1 deletion(-)

diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
index 595107e..e562869 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
@@ -22,6 +22,81 @@
 /* 5GNR SW PMD logging ID */
 static int fpga_5gnr_fec_logtype;
 
+/* Write to 16 bit MMIO register address */
+static inline void
+mmio_write_16(void *addr, uint16_t value)
+{
+	*((volatile uint16_t *)(addr)) = rte_cpu_to_le_16(value);
+}
+
+/* Write to 32 bit MMIO register address */
+static inline void
+mmio_write_32(void *addr, uint32_t value)
+{
+	*((volatile uint32_t *)(addr)) = rte_cpu_to_le_32(value);
+}
+
+/* Write to 64 bit MMIO register address */
+static inline void
+mmio_write_64(void *addr, uint64_t value)
+{
+	*((volatile uint64_t *)(addr)) = rte_cpu_to_le_64(value);
+}
+
+/* Write a 8 bit register of a FPGA 5GNR FEC device */
+static inline void
+fpga_reg_write_8(void *mmio_base, uint32_t offset, uint8_t payload)
+{
+	void *reg_addr = RTE_PTR_ADD(mmio_base, offset);
+	*((volatile uint8_t *)(reg_addr)) = payload;
+}
+
+/* Write a 16 bit register of a FPGA 5GNR FEC device */
+static inline void
+fpga_reg_write_16(void *mmio_base, uint32_t offset, uint16_t payload)
+{
+	void *reg_addr = RTE_PTR_ADD(mmio_base, offset);
+	mmio_write_16(reg_addr, payload);
+}
+
+/* Write a 32 bit register of a FPGA 5GNR FEC device */
+static inline void
+fpga_reg_write_32(void *mmio_base, uint32_t offset, uint32_t payload)
+{
+	void *reg_addr = RTE_PTR_ADD(mmio_base, offset);
+	mmio_write_32(reg_addr, payload);
+}
+
+/* Write a 64 bit register of a FPGA 5GNR FEC device */
+static inline void
+fpga_reg_write_64(void *mmio_base, uint32_t offset, uint64_t payload)
+{
+	void *reg_addr = RTE_PTR_ADD(mmio_base, offset);
+	mmio_write_64(reg_addr, payload);
+}
+
+/* Write a ring control register of a FPGA 5GNR FEC device */
+static inline void
+fpga_ring_reg_write(void *mmio_base, uint32_t offset,
+		struct fpga_ring_ctrl_reg payload)
+{
+	fpga_reg_write_64(mmio_base, offset, payload.ring_base_addr);
+	fpga_reg_write_64(mmio_base, offset + FPGA_5GNR_FEC_RING_HEAD_ADDR,
+			payload.ring_head_addr);
+	fpga_reg_write_16(mmio_base, offset + FPGA_5GNR_FEC_RING_SIZE,
+			payload.ring_size);
+	fpga_reg_write_16(mmio_base, offset + FPGA_5GNR_FEC_RING_HEAD_POINT,
+			payload.head_point);
+	fpga_reg_write_8(mmio_base, offset + FPGA_5GNR_FEC_RING_FLUSH_QUEUE_EN,
+			payload.flush_queue_en);
+	fpga_reg_write_16(mmio_base, offset + FPGA_5GNR_FEC_RING_SHADOW_TAIL,
+			payload.shadow_tail);
+	fpga_reg_write_8(mmio_base, offset + FPGA_5GNR_FEC_RING_MISC,
+			payload.misc);
+	fpga_reg_write_8(mmio_base, offset + FPGA_5GNR_FEC_RING_ENABLE,
+			payload.enable);
+}
+
 /* Read a register of FPGA 5GNR FEC device */
 static uint32_t
 fpga_reg_read_32(void *mmio_base, uint32_t offset)
@@ -31,9 +106,115 @@
 	return rte_le_to_cpu_32(ret);
 }
 
+
 static int
-fpga_dev_close(struct rte_bbdev *dev __rte_unused)
+fpga_setup_queues(struct rte_bbdev *dev, uint16_t num_queues, int socket_id)
 {
+	/* Number of queues bound to a PF/VF */
+	uint32_t hw_q_num = 0;
+	uint32_t ring_size, payload, address, q_id, offset;
+	rte_iova_t phys_addr;
+	struct fpga_ring_ctrl_reg ring_reg;
+	struct fpga_5gnr_fec_device *fpga_dev = dev->data->dev_private;
+
+	address = FPGA_5GNR_FEC_QUEUE_PF_VF_MAP_DONE;
+	if (!(fpga_reg_read_32(fpga_dev->mmio_base, address) & 0x1)) {
+		rte_bbdev_log(ERR,
+				"Queue-PF/VF mapping is not set! Was PF configured for device (%s) ?",
+				dev->data->name);
+		return -EPERM;
+	}
+
+	/* Clear queue registers structure */
+	memset(&ring_reg, 0, sizeof(struct fpga_ring_ctrl_reg));
+
+	/* Scan queue map.
+	 * If a queue is valid and mapped to a calling PF/VF the read value is
+	 * replaced with a queue ID and if it's not then
+	 * FPGA_INVALID_HW_QUEUE_ID is returned.
+	 */
+	for (q_id = 0; q_id < FPGA_TOTAL_NUM_QUEUES; ++q_id) {
+		uint32_t hw_q_id = fpga_reg_read_32(fpga_dev->mmio_base,
+				FPGA_5GNR_FEC_QUEUE_MAP + (q_id << 2));
+
+		rte_bbdev_log_debug("%s: queue ID: %u, registry queue ID: %u",
+				dev->device->name, q_id, hw_q_id);
+
+		if (hw_q_id != FPGA_INVALID_HW_QUEUE_ID) {
+			fpga_dev->q_bound_bit_map |= (1ULL << q_id);
+			/* Clear queue register of found queue */
+			offset = FPGA_5GNR_FEC_RING_CTRL_REGS +
+				(sizeof(struct fpga_ring_ctrl_reg) * q_id);
+			fpga_ring_reg_write(fpga_dev->mmio_base,
+					offset, ring_reg);
+			++hw_q_num;
+		}
+	}
+	if (hw_q_num == 0) {
+		rte_bbdev_log(ERR,
+			"No HW queues assigned to this device. Probably this is a VF configured for PF mode. Check device configuration!");
+		return -ENODEV;
+	}
+
+	if (num_queues > hw_q_num) {
+		rte_bbdev_log(ERR,
+			"Not enough queues for device %s! Requested: %u, available: %u",
+			dev->device->name, num_queues, hw_q_num);
+		return -EINVAL;
+	}
+
+	ring_size = FPGA_RING_MAX_SIZE * sizeof(struct fpga_dma_dec_desc);
+
+	/* Enforce 32 byte alignment */
+	RTE_BUILD_BUG_ON((RTE_CACHE_LINE_SIZE % 32) != 0);
+
+	/* Allocate memory for SW descriptor rings */
+	fpga_dev->sw_rings = rte_zmalloc_socket(dev->device->driver->name,
+			num_queues * ring_size, RTE_CACHE_LINE_SIZE,
+			socket_id);
+	if (fpga_dev->sw_rings == NULL) {
+		rte_bbdev_log(ERR,
+				"Failed to allocate memory for %s:%u sw_rings",
+				dev->device->driver->name, dev->data->dev_id);
+		return -ENOMEM;
+	}
+
+	fpga_dev->sw_rings_phys = rte_malloc_virt2iova(fpga_dev->sw_rings);
+	fpga_dev->sw_ring_size = ring_size;
+	fpga_dev->sw_ring_max_depth = FPGA_RING_MAX_SIZE;
+
+	/* Allocate memory for ring flush status */
+	fpga_dev->flush_queue_status = rte_zmalloc_socket(NULL,
+			sizeof(uint64_t), RTE_CACHE_LINE_SIZE, socket_id);
+	if (fpga_dev->flush_queue_status == NULL) {
+		rte_bbdev_log(ERR,
+				"Failed to allocate memory for %s:%u flush_queue_status",
+				dev->device->driver->name, dev->data->dev_id);
+		return -ENOMEM;
+	}
+
+	/* Set the flush status address registers */
+	phys_addr = rte_malloc_virt2iova(fpga_dev->flush_queue_status);
+
+	address = FPGA_5GNR_FEC_VFQ_FLUSH_STATUS_LW;
+	payload = (uint32_t)(phys_addr);
+	fpga_reg_write_32(fpga_dev->mmio_base, address, payload);
+
+	address = FPGA_5GNR_FEC_VFQ_FLUSH_STATUS_HI;
+	payload = (uint32_t)(phys_addr >> 32);
+	fpga_reg_write_32(fpga_dev->mmio_base, address, payload);
+
+	return 0;
+}
+
+static int
+fpga_dev_close(struct rte_bbdev *dev)
+{
+	struct fpga_5gnr_fec_device *fpga_dev = dev->data->dev_private;
+
+	rte_free(fpga_dev->sw_rings);
+	rte_free(fpga_dev->flush_queue_status);
+
 	return 0;
 }
 
@@ -89,9 +270,267 @@
 	}
 }
 
+/**
+ * Find index of queue bound to current PF/VF which is unassigned. Return -1
+ * when there is no available queue
+ */
+static int
+fpga_find_free_queue_idx(struct rte_bbdev *dev,
+		const struct rte_bbdev_queue_conf *conf)
+{
+	struct fpga_5gnr_fec_device *d = dev->data->dev_private;
+	uint64_t q_idx;
+	uint8_t i = 0;
+	uint8_t range = FPGA_TOTAL_NUM_QUEUES >> 1;
+
+	if (conf->op_type == RTE_BBDEV_OP_LDPC_ENC) {
+		i = FPGA_NUM_DL_QUEUES;
+		range = FPGA_TOTAL_NUM_QUEUES;
+	}
+
+	for (; i < range; ++i) {
+		q_idx = 1ULL << i;
+		/* Check if index of queue is bound to current PF/VF */
+		if (d->q_bound_bit_map & q_idx)
+			/* Check if found queue was not already assigned */
+			if (!(d->q_assigned_bit_map & q_idx)) {
+				d->q_assigned_bit_map |= q_idx;
+				return i;
+			}
+	}
+
+	rte_bbdev_log(INFO, "Failed to find free queue on %s", dev->data->name);
+
+	return -1;
+}
+
+static int
+fpga_queue_setup(struct rte_bbdev *dev, uint16_t queue_id,
+		const struct rte_bbdev_queue_conf *conf)
+{
+	uint32_t address, ring_offset;
+	struct fpga_5gnr_fec_device *d = dev->data->dev_private;
+	struct fpga_queue *q;
+	int8_t q_idx;
+
+	/* Check if there is a free queue to assign */
+	q_idx = fpga_find_free_queue_idx(dev, conf);
+	if (q_idx == -1)
+		return -1;
+
+	/* Allocate the queue data structure. */
+	q = rte_zmalloc_socket(dev->device->driver->name, sizeof(*q),
+			RTE_CACHE_LINE_SIZE, conf->socket);
+	if (q == NULL) {
+		/* Mark queue as un-assigned */
+		d->q_assigned_bit_map &= (0xFFFFFFFF - (1ULL << q_idx));
+		rte_bbdev_log(ERR, "Failed to allocate queue memory");
+		return -ENOMEM;
+	}
+
+	q->d = d;
+	q->q_idx = q_idx;
+
+	/* Set ring_base_addr */
+	q->ring_addr = RTE_PTR_ADD(d->sw_rings, (d->sw_ring_size * queue_id));
+	q->ring_ctrl_reg.ring_base_addr = d->sw_rings_phys +
+			(d->sw_ring_size * queue_id);
+
+	/* Allocate memory for Completion Head variable*/
+	q->ring_head_addr = rte_zmalloc_socket(dev->device->driver->name,
+			sizeof(uint64_t), RTE_CACHE_LINE_SIZE, conf->socket);
+	if (q->ring_head_addr == NULL) {
+		/* Mark queue as un-assigned */
+		d->q_assigned_bit_map &= (0xFFFFFFFF - (1ULL << q_idx));
+		rte_free(q);
+		rte_bbdev_log(ERR,
+				"Failed to allocate memory for %s:%u completion_head",
+				dev->device->driver->name, dev->data->dev_id);
+		return -ENOMEM;
+	}
+	/* Set ring_head_addr */
+	q->ring_ctrl_reg.ring_head_addr =
+			rte_malloc_virt2iova(q->ring_head_addr);
+
+	/* Clear shadow_completion_head */
+	q->shadow_completion_head = 0;
+
+	/* Set ring_size */
+	if (conf->queue_size > FPGA_RING_MAX_SIZE) {
+		/* Mark queue as un-assigned */
+		d->q_assigned_bit_map &= (0xFFFFFFFF - (1ULL << q_idx));
+		rte_free(q->ring_head_addr);
+		rte_free(q);
+		rte_bbdev_log(ERR,
+				"Size of queue is too big %d (MAX: %d ) for %s:%u",
+				conf->queue_size, FPGA_RING_MAX_SIZE,
+				dev->device->driver->name, dev->data->dev_id);
+		return -EINVAL;
+	}
+	q->ring_ctrl_reg.ring_size = conf->queue_size;
+
+	/* Set Miscellaneous FPGA register*/
+	/* Max iteration number for TTI mitigation - todo */
+	q->ring_ctrl_reg.max_ul_dec = 0;
+	/* Enable max iteration number for TTI - todo */
+	q->ring_ctrl_reg.max_ul_dec_en = 0;
+
+	/* Enable the ring */
+	q->ring_ctrl_reg.enable = 1;
+
+	/* Set FPGA head_point and tail registers */
+	q->ring_ctrl_reg.head_point = q->tail = 0;
+
+	/* Set FPGA shadow_tail register */
+	q->ring_ctrl_reg.shadow_tail = q->tail;
+
+	/* Calculates the ring offset for found queue */
+	ring_offset = FPGA_5GNR_FEC_RING_CTRL_REGS +
+			(sizeof(struct fpga_ring_ctrl_reg) * q_idx);
+
+	/* Set FPGA Ring Control Registers */
+	fpga_ring_reg_write(d->mmio_base, ring_offset, q->ring_ctrl_reg);
+
+	/* Store MMIO register of shadow_tail */
+	address = ring_offset + FPGA_5GNR_FEC_RING_SHADOW_TAIL;
+	q->shadow_tail_addr = RTE_PTR_ADD(d->mmio_base, address);
+
+	q->head_free_desc = q->tail;
+
+	/* Set wrap mask */
+	q->sw_ring_wrap_mask = conf->queue_size - 1;
+
+	rte_bbdev_log_debug("Setup dev%u q%u: queue_idx=%u",
+			dev->data->dev_id, queue_id, q->q_idx);
+
+	dev->data->queues[queue_id].queue_private = q;
+
+	rte_bbdev_log_debug("BBDEV queue[%d] set up for FPGA queue[%d]",
+			queue_id, q_idx);
+
+	return 0;
+}
+
+static int
+fpga_queue_release(struct rte_bbdev *dev, uint16_t queue_id)
+{
+	struct fpga_5gnr_fec_device *d = dev->data->dev_private;
+	struct fpga_queue *q = dev->data->queues[queue_id].queue_private;
+	struct fpga_ring_ctrl_reg ring_reg;
+	uint32_t offset;
+
+	rte_bbdev_log_debug("FPGA Queue[%d] released", queue_id);
+
+	if (q != NULL) {
+		memset(&ring_reg, 0, sizeof(struct fpga_ring_ctrl_reg));
+		offset = FPGA_5GNR_FEC_RING_CTRL_REGS +
+			(sizeof(struct fpga_ring_ctrl_reg) * q->q_idx);
+		/* Disable queue */
+		fpga_reg_write_8(d->mmio_base,
+				offset + FPGA_5GNR_FEC_RING_ENABLE, 0x00);
+		/* Clear queue registers */
+		fpga_ring_reg_write(d->mmio_base, offset, ring_reg);
+
+		/* Mark the Queue as un-assigned */
+		d->q_assigned_bit_map &= (0xFFFFFFFF - (1ULL << q->q_idx));
+		rte_free(q->ring_head_addr);
+		rte_free(q);
+		dev->data->queues[queue_id].queue_private = NULL;
+	}
+
+	return 0;
+}
+
+/* Function starts a device queue. */
+static int
+fpga_queue_start(struct rte_bbdev *dev, uint16_t queue_id)
+{
+	struct fpga_5gnr_fec_device *d = dev->data->dev_private;
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	if (d == NULL) {
+		rte_bbdev_log(ERR, "Invalid device pointer");
+		return -1;
+	}
+#endif
+	struct fpga_queue *q = dev->data->queues[queue_id].queue_private;
+	uint32_t offset = FPGA_5GNR_FEC_RING_CTRL_REGS +
+			(sizeof(struct fpga_ring_ctrl_reg) * q->q_idx);
+	uint8_t enable = 0x01;
+	uint16_t zero = 0x0000;
+
+	/* Clear queue head and tail variables */
+	q->tail = q->head_free_desc = 0;
+
+	/* Clear FPGA head_point and tail registers */
+	fpga_reg_write_16(d->mmio_base, offset + FPGA_5GNR_FEC_RING_HEAD_POINT,
+			zero);
+	fpga_reg_write_16(d->mmio_base, offset + FPGA_5GNR_FEC_RING_SHADOW_TAIL,
+			zero);
+
+	/* Enable queue */
+	fpga_reg_write_8(d->mmio_base, offset + FPGA_5GNR_FEC_RING_ENABLE,
+			enable);
+
+	rte_bbdev_log_debug("FPGA Queue[%d] started", queue_id);
+	return 0;
+}
+
+/* Function stops a device queue. */
+static int
+fpga_queue_stop(struct rte_bbdev *dev, uint16_t queue_id)
+{
+	struct fpga_5gnr_fec_device *d = dev->data->dev_private;
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	if (d == NULL) {
+		rte_bbdev_log(ERR, "Invalid device pointer");
+		return -1;
+	}
+#endif
+	struct fpga_queue *q = dev->data->queues[queue_id].queue_private;
+	uint32_t offset = FPGA_5GNR_FEC_RING_CTRL_REGS +
+			(sizeof(struct fpga_ring_ctrl_reg) * q->q_idx);
+	uint8_t payload = 0x01;
+	uint8_t counter = 0;
+	uint8_t timeout = FPGA_QUEUE_FLUSH_TIMEOUT_US /
+			FPGA_TIMEOUT_CHECK_INTERVAL;
+
+	/* Set flush_queue_en bit to trigger queue flushing */
+	fpga_reg_write_8(d->mmio_base,
+			offset + FPGA_5GNR_FEC_RING_FLUSH_QUEUE_EN, payload);
+
+	/** Check if queue flush is completed.
+	 * FPGA will update the completion flag after queue flushing is
+	 * completed. If completion flag is not updated within 1ms it is
+	 * considered as a failure.
+	 */
+	while (!(*((volatile uint8_t *)d->flush_queue_status + q->q_idx)
+			& payload)) {
+		if (counter > timeout) {
+			rte_bbdev_log(ERR, "FPGA Queue Flush failed for queue %d",
+					queue_id);
+			return -1;
+		}
+		usleep(FPGA_TIMEOUT_CHECK_INTERVAL);
+		counter++;
+	}
+
+	/* Disable queue */
+	payload = 0x00;
+	fpga_reg_write_8(d->mmio_base, offset + FPGA_5GNR_FEC_RING_ENABLE,
+			payload);
+
+	rte_bbdev_log_debug("FPGA Queue[%d] stopped", queue_id);
+	return 0;
+}
+
 static const struct rte_bbdev_ops fpga_ops = {
+	.setup_queues = fpga_setup_queues,
 	.close = fpga_dev_close,
 	.info_get = fpga_dev_info_get,
+	.queue_setup = fpga_queue_setup,
+	.queue_stop = fpga_queue_stop,
+	.queue_start = fpga_queue_start,
+	.queue_release = fpga_queue_release,
 };
 
 /* Initialization Function */
diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
index b1416f6..175f5d0 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
@@ -223,8 +223,43 @@ struct __attribute__((__packed__)) fpga_ring_ctrl_reg {
 struct fpga_5gnr_fec_device {
 	/** Base address of MMIO registers (BAR0) */
 	void *mmio_base;
+	/** Base address of memory for sw rings */
+	void *sw_rings;
+	/** Physical address of sw_rings */
+	rte_iova_t sw_rings_phys;
+	/** Number of bytes available for each queue in device. */
+	uint32_t sw_ring_size;
+	/** Max number of entries available for each queue in device */
+	uint32_t sw_ring_max_depth;
+	/** Base address of response tail pointer buffer */
+	uint32_t *tail_ptrs;
+	/** Physical address of tail pointers */
+	rte_iova_t tail_ptr_phys;
+	/** Queues flush completion flag */
+	uint64_t *flush_queue_status;
+	/* Bitmap capturing which Queues are bound to the PF/VF */
+	uint64_t q_bound_bit_map;
+	/* Bitmap capturing which Queues have already been assigned */
+	uint64_t q_assigned_bit_map;
 	/** True if this is a PF FPGA FEC device */
 	bool pf_device;
 };
 
+/* Structure associated with each queue. */
+struct __rte_cache_aligned fpga_queue {
+	struct fpga_ring_ctrl_reg ring_ctrl_reg;  /* Ring Control Register */
+	union fpga_dma_desc *ring_addr;  /* Virtual address of software ring */
+	uint64_t *ring_head_addr;  /* Virtual address of completion_head */
+	uint64_t shadow_completion_head; /* Shadow completion head value */
+	uint16_t head_free_desc;  /* Ring head */
+	uint16_t tail;  /* Ring tail */
+	/* Mask used to wrap enqueued descriptors on the sw ring */
+	uint32_t sw_ring_wrap_mask;
+	uint32_t irq_enable;  /* Enable ops dequeue interrupts if set to 1 */
+	uint8_t q_idx;  /* Queue index */
+	struct fpga_5gnr_fec_device *d;
+	/* MMIO register of shadow_tail used to enqueue descriptors */
+	void *shadow_tail_addr;
+};
+
 #endif /* _RTE_FPGA_5GNR_FEC_H_ */
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [dpdk-dev] [PATCH v1 07/13] baseband/fpga_5gnr_fec: add LDPC processing functions
  2020-03-29 20:18 [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
                   ` (5 preceding siblings ...)
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 06/13] baseband/fpga_5gnr_fec: add queue configuration Nicolas Chautru
@ 2020-03-29 20:18 ` Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 08/13] baseband/fpga_5gnr_fec: add HW error capture Nicolas Chautru
                   ` (5 subsequent siblings)
  12 siblings, 0 replies; 14+ messages in thread
From: Nicolas Chautru @ 2020-03-29 20:18 UTC (permalink / raw)
  To: dev; +Cc: Nicolas Chautru

Adding LDPC processing operations and related documentation.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 doc/guides/bbdevs/fpga_5gnr_fec.rst                |  28 +
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 660 +++++++++++++++++++++
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h |   9 +
 3 files changed, 697 insertions(+)

diff --git a/doc/guides/bbdevs/fpga_5gnr_fec.rst b/doc/guides/bbdevs/fpga_5gnr_fec.rst
index 007ace0..7eab7a4 100644
--- a/doc/guides/bbdevs/fpga_5gnr_fec.rst
+++ b/doc/guides/bbdevs/fpga_5gnr_fec.rst
@@ -13,6 +13,8 @@ Features
 
 FPGA 5GNR FEC PMD supports the following features:
 
+- LDPC Encode in the DL
+- LDPC Decode in the UL
 - 8 VFs per PF (physical device)
 - Maximum of 32 UL queues per VF
 - Maximum of 32 DL queues per VF
@@ -20,6 +22,24 @@ FPGA 5GNR FEC PMD supports the following features:
 - MSI-X
 - SR-IOV
 
+FPGA 5GNR FEC PMD supports the following BBDEV capabilities:
+
+* For the LDPC encode operation:
+   - ``RTE_BBDEV_LDPC_CRC_24B_ATTACH`` :  set to attach CRC24B to CB(s)
+   - ``RTE_BBDEV_LDPC_RATE_MATCH`` :  if set then do not do Rate Match bypass
+
+* For the LDPC decode operation:
+   - ``RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK`` :  check CRC24B from CB(s)
+   - ``RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE`` :  disable early termination
+   - ``RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP`` :  drops CRC24B bits appended while decoding
+   - ``RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE`` :  provides an input for HARQ combining
+   - ``RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE`` :  provides an input for HARQ combining
+   - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE`` :  HARQ memory input is internal
+   - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE`` :  HARQ memory output is internal
+   - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK`` :  loopback data to/from HARQ memory
+   - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_FILLERS`` :  HARQ memory includes the fillers bits
+
+
 Limitations
 -----------
 
@@ -144,3 +164,11 @@ name is different:
 .. code-block:: console
 
   echo <num-of-vfs> > /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/sriov_numvfs
+
+
+Test Vectors
+~~~~~~~~~~~~
+
+In addition to the simple LDPC decoder and LDPC encoder tests, bbdev also provides
+a range of additional tests under the test_vectors folder, which may be useful. The results
+of these tests will depend on the FPGA 5GNR FEC capabilities.
diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
index e562869..e330a6d 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
@@ -13,6 +13,9 @@
 #include <rte_pci.h>
 #include <rte_bus_pci.h>
 #include <rte_byteorder.h>
+#ifdef RTE_BBDEV_OFFLOAD_COST
+#include <rte_cycles.h>
+#endif
 
 #include <rte_bbdev.h>
 #include <rte_bbdev_pmd.h>
@@ -226,6 +229,40 @@
 	uint32_t q_id = 0;
 
 	static const struct rte_bbdev_op_cap bbdev_capabilities[] = {
+		{
+			.type   = RTE_BBDEV_OP_LDPC_ENC,
+			.cap.ldpc_enc = {
+				.capability_flags =
+						RTE_BBDEV_LDPC_RATE_MATCH |
+						RTE_BBDEV_LDPC_ENC_INTERRUPTS |
+						RTE_BBDEV_LDPC_CRC_24B_ATTACH,
+				.num_buffers_src =
+						RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
+				.num_buffers_dst =
+						RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
+			}
+		},
+		{
+		.type   = RTE_BBDEV_OP_LDPC_DEC,
+		.cap.ldpc_dec = {
+			.capability_flags =
+				RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK |
+				RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP |
+				RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE |
+				RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE |
+				RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE |
+				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE |
+				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE |
+				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_FILLERS,
+			.llr_size = 6,
+			.llr_decimals = 2,
+			.num_buffers_src =
+					RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
+			.num_buffers_hard_out =
+					RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
+			.num_buffers_soft_out = 0,
+		}
+		},
 		RTE_BBDEV_END_OF_CAPABILITIES_LIST()
 	};
 
@@ -532,6 +569,625 @@
 	.queue_start = fpga_queue_start,
 	.queue_release = fpga_queue_release,
 };
+static inline void
+fpga_dma_enqueue(struct fpga_queue *q, uint16_t num_desc,
+		struct rte_bbdev_stats *queue_stats)
+{
+#ifdef RTE_BBDEV_OFFLOAD_COST
+	uint64_t start_time = 0;
+	queue_stats->acc_offload_cycles = 0;
+#else
+	RTE_SET_USED(queue_stats);
+#endif
+
+	/* Update tail and shadow_tail register */
+	q->tail = (q->tail + num_desc) & q->sw_ring_wrap_mask;
+
+	rte_wmb();
+
+#ifdef RTE_BBDEV_OFFLOAD_COST
+	/* Start time measurement for enqueue function offload. */
+	start_time = rte_rdtsc_precise();
+#endif
+	mmio_write_16(q->shadow_tail_addr, q->tail);
+
+#ifdef RTE_BBDEV_OFFLOAD_COST
+	rte_wmb();
+	queue_stats->acc_offload_cycles += rte_rdtsc_precise() - start_time;
+#endif
+}
+
+/* Read flag value 0/1/ from bitmap */
+static inline bool
+check_bit(uint32_t bitmap, uint32_t bitmask)
+{
+	return bitmap & bitmask;
+}
+
+/* Compute value of k0.
+ * Based on 3GPP 38.212 Table 5.4.2.1-2
+ * Starting position of different redundancy versions, k0
+ */
+static inline uint16_t
+get_k0(uint16_t n_cb, uint16_t z_c, uint8_t bg, uint8_t rv_index)
+{
+	if (rv_index == 0)
+		return 0;
+	uint16_t n = (bg == 1 ? N_ZC_1 : N_ZC_2) * z_c;
+	if (n_cb == n) {
+		if (rv_index == 1)
+			return (bg == 1 ? K0_1_1 : K0_1_2) * z_c;
+		else if (rv_index == 2)
+			return (bg == 1 ? K0_2_1 : K0_2_2) * z_c;
+		else
+			return (bg == 1 ? K0_3_1 : K0_3_2) * z_c;
+	}
+	/* LBRM case - includes a division by N */
+	if (rv_index == 1)
+		return (((bg == 1 ? K0_1_1 : K0_1_2) * n_cb)
+				/ n) * z_c;
+	else if (rv_index == 2)
+		return (((bg == 1 ? K0_2_1 : K0_2_2) * n_cb)
+				/ n) * z_c;
+	else
+		return (((bg == 1 ? K0_3_1 : K0_3_2) * n_cb)
+				/ n) * z_c;
+}
+
+/**
+ * Set DMA descriptor for encode operation (1 Code Block)
+ *
+ * @param op
+ *   Pointer to a single encode operation.
+ * @param desc
+ *   Pointer to DMA descriptor.
+ * @param input
+ *   Pointer to pointer to input data which will be decoded.
+ * @param e
+ *   E value (length of output in bits).
+ * @param ncb
+ *   Ncb value (size of the soft buffer).
+ * @param out_length
+ *   Length of output buffer
+ * @param in_offset
+ *   Input offset in rte_mbuf structure. It is used for calculating the point
+ *   where data is starting.
+ * @param out_offset
+ *   Output offset in rte_mbuf structure. It is used for calculating the point
+ *   where hard output data will be stored.
+ * @param cbs_in_op
+ *   Number of CBs contained in one operation.
+ */
+static inline int
+fpga_dma_desc_te_fill(struct rte_bbdev_enc_op *op,
+		struct fpga_dma_enc_desc *desc, struct rte_mbuf *input,
+		struct rte_mbuf *output, uint16_t k_,  uint16_t e,
+		uint32_t in_offset, uint32_t out_offset, uint16_t desc_offset,
+		uint8_t cbs_in_op)
+{
+	/* reset */
+	desc->done = 0;
+	desc->error = 0;
+	desc->k_ = k_;
+	desc->rm_e = e;
+	desc->desc_idx = desc_offset;
+	desc->zc = op->ldpc_enc.z_c;
+	desc->bg_idx = op->ldpc_enc.basegraph - 1;
+	desc->qm_idx = op->ldpc_enc.q_m / 2;
+	desc->crc_en = check_bit(op->ldpc_enc.op_flags,
+			RTE_BBDEV_LDPC_CRC_24B_ATTACH);
+	desc->irq_en = 0;
+	desc->k0 = get_k0(op->ldpc_enc.n_cb, op->ldpc_enc.z_c,
+			op->ldpc_enc.basegraph, op->ldpc_enc.rv_index);
+	desc->ncb = op->ldpc_enc.n_cb;
+	desc->num_null = op->ldpc_enc.n_filler;
+	/* Set inbound data buffer address */
+	desc->in_addr_hi = (uint32_t)(
+			rte_pktmbuf_mtophys_offset(input, in_offset) >> 32);
+	desc->in_addr_lw = (uint32_t)(
+			rte_pktmbuf_mtophys_offset(input, in_offset));
+
+	desc->out_addr_hi = (uint32_t)(
+			rte_pktmbuf_mtophys_offset(output, out_offset) >> 32);
+	desc->out_addr_lw = (uint32_t)(
+			rte_pktmbuf_mtophys_offset(output, out_offset));
+	/* Save software context needed for dequeue */
+	desc->op_addr = op;
+	/* Set total number of CBs in an op */
+	desc->cbs_in_op = cbs_in_op;
+	return 0;
+}
+
+/**
+ * Set DMA descriptor for decode operation (1 Code Block)
+ *
+ * @param op
+ *   Pointer to a single encode operation.
+ * @param desc
+ *   Pointer to DMA descriptor.
+ * @param input
+ *   Pointer to pointer to input data which will be decoded.
+ * @param in_offset
+ *   Input offset in rte_mbuf structure. It is used for calculating the point
+ *   where data is starting.
+ * @param out_offset
+ *   Output offset in rte_mbuf structure. It is used for calculating the point
+ *   where hard output data will be stored.
+ * @param cbs_in_op
+ *   Number of CBs contained in one operation.
+ */
+static inline int
+fpga_dma_desc_ld_fill(struct rte_bbdev_dec_op *op,
+		struct fpga_dma_dec_desc *desc,
+		struct rte_mbuf *input,	struct rte_mbuf *output,
+		uint16_t harq_in_length,
+		uint32_t in_offset, uint32_t out_offset,
+		uint32_t harq_offset,
+		uint16_t desc_offset,
+		uint8_t cbs_in_op)
+{
+	/* reset */
+	desc->done = 0;
+	desc->error = 0;
+	/* Set inbound data buffer address */
+	desc->in_addr_hi = (uint32_t)(
+			rte_pktmbuf_mtophys_offset(input, in_offset) >> 32);
+	desc->in_addr_lw = (uint32_t)(
+			rte_pktmbuf_mtophys_offset(input, in_offset));
+	desc->rm_e = op->ldpc_dec.cb_params.e;
+	desc->harq_input_length = harq_in_length;
+	desc->et_dis = !check_bit(op->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE);
+	desc->rv = op->ldpc_dec.rv_index;
+	desc->crc24b_ind = check_bit(op->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK);
+	desc->drop_crc24b = check_bit(op->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP);
+	desc->desc_idx = desc_offset;
+	desc->ncb = op->ldpc_dec.n_cb;
+	desc->num_null = op->ldpc_dec.n_filler;
+	desc->hbstroe_offset = harq_offset >> 10;
+	desc->zc = op->ldpc_dec.z_c;
+	desc->harqin_en = check_bit(op->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE);
+	desc->bg_idx = op->ldpc_dec.basegraph - 1;
+	desc->max_iter = op->ldpc_dec.iter_max;
+	desc->qm_idx = op->ldpc_dec.q_m / 2;
+	desc->out_addr_hi = (uint32_t)(
+			rte_pktmbuf_mtophys_offset(output, out_offset) >> 32);
+	desc->out_addr_lw = (uint32_t)(
+			rte_pktmbuf_mtophys_offset(output, out_offset));
+	/* Save software context needed for dequeue */
+	desc->op_addr = op;
+	/* Set total number of CBs in an op */
+	desc->cbs_in_op = cbs_in_op;
+
+	return 0;
+}
+
+static inline char *
+mbuf_append(struct rte_mbuf *m_head, struct rte_mbuf *m, uint16_t len)
+{
+	if (unlikely(len > rte_pktmbuf_tailroom(m)))
+		return NULL;
+
+	char *tail = (char *)m->buf_addr + m->data_off + m->data_len;
+	m->data_len = (uint16_t)(m->data_len + len);
+	m_head->pkt_len  = (m_head->pkt_len + len);
+	return tail;
+}
+
+static inline int
+enqueue_ldpc_enc_one_op_cb(struct fpga_queue *q, struct rte_bbdev_enc_op *op,
+		uint16_t desc_offset)
+{
+	union fpga_dma_desc *desc;
+	int ret;
+	uint8_t c, crc24_bits = 0;
+	struct rte_bbdev_op_ldpc_enc *enc = &op->ldpc_enc;
+	uint16_t in_offset = enc->input.offset;
+	uint16_t out_offset = enc->output.offset;
+	struct rte_mbuf *m_in = enc->input.data;
+	struct rte_mbuf *m_out = enc->output.data;
+	struct rte_mbuf *m_out_head = enc->output.data;
+	uint32_t in_length, out_length, e;
+	uint16_t total_left = enc->input.length;
+	uint16_t ring_offset;
+	uint16_t K, k_;
+
+	/* Clear op status */
+	op->status = 0;
+
+	if (m_in == NULL || m_out == NULL) {
+		rte_bbdev_log(ERR, "Invalid mbuf pointer");
+		op->status = 1 << RTE_BBDEV_DATA_ERROR;
+		return -EINVAL;
+	}
+
+	if (enc->op_flags & RTE_BBDEV_LDPC_CRC_24B_ATTACH)
+		crc24_bits = 24;
+
+	if (enc->code_block_mode == 0) {
+		/* For Transport Block mode */
+		/* FIXME */
+		c = enc->tb_params.c;
+		e = enc->tb_params.ea;
+	} else { /* For Code Block mode */
+		c = 1;
+		e = enc->cb_params.e;
+	}
+
+	/* Update total_left */
+	K = (enc->basegraph == 1 ? 22 : 10) * enc->z_c;
+	k_ = K - enc->n_filler;
+	in_length = (k_ - crc24_bits) >> 3;
+	out_length = (e + 7) >> 3;
+
+	total_left = rte_pktmbuf_data_len(m_in) - in_offset;
+
+	/* Update offsets */
+	if (total_left != in_length) {
+		op->status |= 1 << RTE_BBDEV_DATA_ERROR;
+		rte_bbdev_log(ERR,
+				"Mismatch between mbuf length and included CBs sizes %d",
+				total_left);
+	}
+
+	mbuf_append(m_out_head, m_out, out_length);
+
+	/* Offset into the ring */
+	ring_offset = ((q->tail + desc_offset) & q->sw_ring_wrap_mask);
+	/* Setup DMA Descriptor */
+	desc = q->ring_addr + ring_offset;
+
+	ret = fpga_dma_desc_te_fill(op, &desc->enc_req, m_in, m_out,
+			k_, e, in_offset, out_offset, ring_offset, c);
+	if (unlikely(ret < 0))
+		return ret;
+
+	/* Update lengths */
+	total_left -= in_length;
+	op->ldpc_enc.output.length += out_length;
+
+	if (total_left > 0) {
+		rte_bbdev_log(ERR,
+			"Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u",
+				total_left, in_length);
+		return -1;
+	}
+
+	return 1;
+}
+
+static inline int
+enqueue_ldpc_dec_one_op_cb(struct fpga_queue *q, struct rte_bbdev_dec_op *op,
+		uint16_t desc_offset)
+{
+	union fpga_dma_desc *desc;
+	int ret;
+	uint16_t ring_offset;
+	uint8_t c;
+	uint16_t e, in_length, out_length, k0, l, seg_total_left, sys_cols;
+	uint16_t K, parity_offset, harq_in_length = 0, harq_out_length = 0;
+	uint16_t crc24_overlap = 0;
+	struct rte_bbdev_op_ldpc_dec *dec = &op->ldpc_dec;
+	struct rte_mbuf *m_in = dec->input.data;
+	struct rte_mbuf *m_out = dec->hard_output.data;
+	struct rte_mbuf *m_out_head = dec->hard_output.data;
+	uint16_t in_offset = dec->input.offset;
+	uint16_t out_offset = dec->hard_output.offset;
+	uint32_t harq_offset = 0;
+
+	/* Clear op status */
+	op->status = 0;
+
+	/* Setup DMA Descriptor */
+	ring_offset = ((q->tail + desc_offset) & q->sw_ring_wrap_mask);
+	desc = q->ring_addr + ring_offset;
+
+	if (m_in == NULL || m_out == NULL) {
+		rte_bbdev_log(ERR, "Invalid mbuf pointer");
+		op->status = 1 << RTE_BBDEV_DATA_ERROR;
+		return -1;
+	}
+
+	c = 1;
+	e = dec->cb_params.e;
+
+	if (check_bit(dec->op_flags, RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP))
+		crc24_overlap = 24;
+
+	sys_cols = (dec->basegraph == 1) ? 22 : 10;
+	K = sys_cols * dec->z_c;
+	parity_offset = K - 2 * dec->z_c;
+
+	out_length = ((K - crc24_overlap - dec->n_filler) >> 3);
+	in_length = e;
+	seg_total_left = dec->input.length;
+
+	if (check_bit(dec->op_flags, RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE)) {
+		harq_in_length = RTE_MIN(dec->harq_combined_input.length,
+				(uint32_t)dec->n_cb);
+	}
+
+	if (check_bit(dec->op_flags, RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE)) {
+		k0 = get_k0(dec->n_cb, dec->z_c,
+				dec->basegraph, dec->rv_index);
+		if (k0 > parity_offset)
+			l = k0 + e;
+		else
+			l = k0 + e + dec->n_filler;
+		harq_out_length = RTE_MIN(RTE_MAX(harq_in_length, l),
+				dec->n_cb - dec->n_filler);
+		dec->harq_combined_output.length = harq_out_length;
+	}
+
+	mbuf_append(m_out_head, m_out, out_length);
+	if (check_bit(dec->op_flags, RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE))
+		harq_offset = dec->harq_combined_input.offset;
+	else if (check_bit(dec->op_flags, RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE))
+		harq_offset = dec->harq_combined_output.offset;
+
+	if ((harq_offset & 0x3FF) > 0) {
+		rte_bbdev_log(ERR, "Invalid HARQ offset %d", harq_offset);
+		op->status = 1 << RTE_BBDEV_DATA_ERROR;
+		return -1;
+	}
+
+	ret = fpga_dma_desc_ld_fill(op, &desc->dec_req, m_in, m_out,
+		harq_in_length, in_offset, out_offset, harq_offset,
+		ring_offset, c);
+	if (unlikely(ret < 0))
+		return ret;
+	/* Update lengths */
+	seg_total_left -= in_length;
+	op->ldpc_dec.hard_output.length += out_length;
+	if (seg_total_left > 0) {
+		rte_bbdev_log(ERR,
+				"Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u",
+				seg_total_left, in_length);
+		return -1;
+	}
+
+	return 1;
+}
+
+static uint16_t
+fpga_enqueue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
+		struct rte_bbdev_enc_op **ops, uint16_t num)
+{
+	uint16_t i, total_enqueued_cbs = 0;
+	int32_t avail;
+	int enqueued_cbs;
+	struct fpga_queue *q = q_data->queue_private;
+	union fpga_dma_desc *desc;
+
+	/* Check if queue is not full */
+	if (unlikely(((q->tail + 1) & q->sw_ring_wrap_mask) ==
+			q->head_free_desc))
+		return 0;
+
+	/* Calculates available space */
+	avail = (q->head_free_desc > q->tail) ?
+		q->head_free_desc - q->tail - 1 :
+		q->ring_ctrl_reg.ring_size + q->head_free_desc - q->tail - 1;
+
+	for (i = 0; i < num; ++i) {
+
+		/* Check if there is available space for further
+		 * processing
+		 */
+		if (unlikely(avail - 1 < 0))
+			break;
+		avail -= 1;
+		enqueued_cbs = enqueue_ldpc_enc_one_op_cb(q, ops[i],
+				total_enqueued_cbs);
+
+		if (enqueued_cbs < 0)
+			break;
+
+		total_enqueued_cbs += enqueued_cbs;
+
+		rte_bbdev_log_debug("enqueuing enc ops [%d/%d] | head %d | tail %d",
+				total_enqueued_cbs, num,
+				q->head_free_desc, q->tail);
+	}
+
+	/* Set interrupt bit for last CB in enqueued ops. FPGA issues interrupt
+	 * only when all previous CBs were already processed.
+	 */
+	desc = q->ring_addr + ((q->tail + total_enqueued_cbs - 1)
+			& q->sw_ring_wrap_mask);
+	desc->enc_req.irq_en = q->irq_enable;
+
+	fpga_dma_enqueue(q, total_enqueued_cbs, &q_data->queue_stats);
+
+	/* Update stats */
+	q_data->queue_stats.enqueued_count += i;
+	q_data->queue_stats.enqueue_err_count += num - i;
+
+	return i;
+}
+
+static uint16_t
+fpga_enqueue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
+		struct rte_bbdev_dec_op **ops, uint16_t num)
+{
+	uint16_t i, total_enqueued_cbs = 0;
+	int32_t avail;
+	int enqueued_cbs;
+	struct fpga_queue *q = q_data->queue_private;
+	union fpga_dma_desc *desc;
+
+	/* Check if queue is not full */
+	if (unlikely(((q->tail + 1) & q->sw_ring_wrap_mask) ==
+			q->head_free_desc))
+		return 0;
+
+	/* Calculates available space */
+	avail = (q->head_free_desc > q->tail) ?
+		q->head_free_desc - q->tail - 1 :
+		q->ring_ctrl_reg.ring_size + q->head_free_desc - q->tail - 1;
+
+	for (i = 0; i < num; ++i) {
+
+		/* Check if there is available space for further
+		 * processing
+		 */
+		if (unlikely(avail - 1 < 0))
+			break;
+		avail -= 1;
+		enqueued_cbs = enqueue_ldpc_dec_one_op_cb(q, ops[i],
+				total_enqueued_cbs);
+
+		if (enqueued_cbs < 0)
+			break;
+
+		total_enqueued_cbs += enqueued_cbs;
+
+		rte_bbdev_log_debug("enqueuing dec ops [%d/%d] | head %d | tail %d",
+				total_enqueued_cbs, num,
+				q->head_free_desc, q->tail);
+	}
+
+	/* Update stats */
+	q_data->queue_stats.enqueued_count += i;
+	q_data->queue_stats.enqueue_err_count += num - i;
+
+	/* Set interrupt bit for last CB in enqueued ops. FPGA issues interrupt
+	 * only when all previous CBs were already processed.
+	 */
+	desc = q->ring_addr + ((q->tail + total_enqueued_cbs - 1)
+			& q->sw_ring_wrap_mask);
+	desc->enc_req.irq_en = q->irq_enable;
+	fpga_dma_enqueue(q, total_enqueued_cbs, &q_data->queue_stats);
+	return i;
+}
+
+
+static inline int
+dequeue_ldpc_enc_one_op_cb(struct fpga_queue *q, struct rte_bbdev_enc_op **op,
+		uint16_t desc_offset)
+{
+	union fpga_dma_desc *desc;
+	int desc_error = 0;
+
+	/* Set current desc */
+	desc = q->ring_addr + ((q->head_free_desc + desc_offset)
+			& q->sw_ring_wrap_mask);
+
+	/*check if done */
+	if (desc->enc_req.done == 0)
+		return -1;
+
+	/* make sure the response is read atomically */
+	rte_smp_rmb();
+
+	rte_bbdev_log_debug("DMA response desc %p", desc);
+
+	return 1;
+}
+
+
+static inline int
+dequeue_ldpc_dec_one_op_cb(struct fpga_queue *q, struct rte_bbdev_dec_op **op,
+		uint16_t desc_offset)
+{
+	union fpga_dma_desc *desc;
+	int desc_error = 0;
+	/* Set descriptor */
+	desc = q->ring_addr + ((q->head_free_desc + desc_offset)
+			& q->sw_ring_wrap_mask);
+
+	/* Verify done bit is set */
+	if (desc->dec_req.done == 0)
+		return -1;
+
+	/* make sure the response is read atomically */
+	rte_smp_rmb();
+
+	*op = desc->dec_req.op_addr;
+
+	if (check_bit((*op)->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK)) {
+		(*op)->status = 0;
+		return 1;
+	}
+
+	/* FPGA reports iterations based on round-up minus 1 */
+	(*op)->ldpc_dec.iter_count = desc->dec_req.iter + 1;
+	/* CRC Check criteria */
+	if (desc->dec_req.crc24b_ind && !(desc->dec_req.crcb_pass))
+		(*op)->status = 1 << RTE_BBDEV_CRC_ERROR;
+	/* et_pass = 0 when decoder fails */
+	(*op)->status |= !(desc->dec_req.et_pass) << RTE_BBDEV_SYNDROME_ERROR;
+	return 1;
+}
+
+static uint16_t
+fpga_dequeue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
+		struct rte_bbdev_enc_op **ops, uint16_t num)
+{
+	struct fpga_queue *q = q_data->queue_private;
+	uint32_t avail = (q->tail - q->head_free_desc) & q->sw_ring_wrap_mask;
+	uint16_t i;
+	uint16_t dequeued_cbs = 0;
+	int ret;
+
+	for (i = 0; (i < num) && (dequeued_cbs < avail); ++i) {
+		ret = dequeue_ldpc_enc_one_op_cb(q, &ops[i], dequeued_cbs);
+
+		if (ret < 0)
+			break;
+
+		dequeued_cbs += ret;
+
+		rte_bbdev_log_debug("dequeuing enc ops [%d/%d] | head %d | tail %d",
+				dequeued_cbs, num, q->head_free_desc, q->tail);
+	}
+
+	/* Update head */
+	q->head_free_desc = (q->head_free_desc + dequeued_cbs) &
+			q->sw_ring_wrap_mask;
+
+	/* Update stats */
+	q_data->queue_stats.dequeued_count += i;
+
+	return i;
+}
+
+static uint16_t
+fpga_dequeue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
+		struct rte_bbdev_dec_op **ops, uint16_t num)
+{
+	struct fpga_queue *q = q_data->queue_private;
+	uint32_t avail = (q->tail - q->head_free_desc) & q->sw_ring_wrap_mask;
+	uint16_t i;
+	uint16_t dequeued_cbs = 0;
+	int ret;
+
+	for (i = 0; (i < num) && (dequeued_cbs < avail); ++i) {
+		ret = dequeue_ldpc_dec_one_op_cb(q, &ops[i], dequeued_cbs);
+
+		if (ret < 0)
+			break;
+
+		dequeued_cbs += ret;
+
+		rte_bbdev_log_debug("dequeuing dec ops [%d/%d] | head %d | tail %d",
+				dequeued_cbs, num, q->head_free_desc, q->tail);
+	}
+
+	/* Update head */
+	q->head_free_desc = (q->head_free_desc + dequeued_cbs) &
+			q->sw_ring_wrap_mask;
+
+	/* Update stats */
+	q_data->queue_stats.dequeued_count += i;
+
+	return i;
+}
+
 
 /* Initialization Function */
 static void
@@ -540,6 +1196,10 @@
 	struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(dev->device);
 
 	dev->dev_ops = &fpga_ops;
+	dev->enqueue_ldpc_enc_ops = fpga_enqueue_ldpc_enc;
+	dev->enqueue_ldpc_dec_ops = fpga_enqueue_ldpc_dec;
+	dev->dequeue_ldpc_enc_ops = fpga_dequeue_ldpc_enc;
+	dev->dequeue_ldpc_dec_ops = fpga_dequeue_ldpc_dec;
 
 	((struct fpga_5gnr_fec_device *) dev->data->dev_private)->pf_device =
 			!strcmp(drv->driver.name,
diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
index 175f5d0..f614f85 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.h
@@ -53,6 +53,15 @@
 #define FPGA_5GNR_FEC_DDR_WR_DATA_LEN_IN_BYTES 8
 #define FPGA_5GNR_FEC_DDR_RD_DATA_LEN_IN_BYTES 8
 
+/* Constants from K0 computation from 3GPP 38.212 Table 5.4.2.1-2 */
+#define N_ZC_1 66 /* N = 66 Zc for BG 1 */
+#define N_ZC_2 50 /* N = 50 Zc for BG 2 */
+#define K0_1_1 17 /* K0 fraction numerator for rv 1 and BG 1 */
+#define K0_1_2 13 /* K0 fraction numerator for rv 1 and BG 2 */
+#define K0_2_1 33 /* K0 fraction numerator for rv 2 and BG 1 */
+#define K0_2_2 25 /* K0 fraction numerator for rv 2 and BG 2 */
+#define K0_3_1 56 /* K0 fraction numerator for rv 3 and BG 1 */
+#define K0_3_2 43 /* K0 fraction numerator for rv 3 and BG 2 */
 
 /* FPGA 5GNR FEC Register mapping on BAR0 */
 enum {
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [dpdk-dev] [PATCH v1 08/13] baseband/fpga_5gnr_fec: add HW error capture
  2020-03-29 20:18 [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
                   ` (6 preceding siblings ...)
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 07/13] baseband/fpga_5gnr_fec: add LDPC processing functions Nicolas Chautru
@ 2020-03-29 20:18 ` Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 09/13] baseband/fpga_5gnr_fec: add debug functionality Nicolas Chautru
                   ` (4 subsequent siblings)
  12 siblings, 0 replies; 14+ messages in thread
From: Nicolas Chautru @ 2020-03-29 20:18 UTC (permalink / raw)
  To: dev; +Cc: Nicolas Chautru

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 56 ++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
index e330a6d..64d32e4 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
@@ -604,6 +604,54 @@
 	return bitmap & bitmask;
 }
 
+/* Print an error if a descriptor error has occurred.
+ *  Return 0 on success, 1 on failure
+ */
+static inline int
+check_desc_error(uint32_t error_code) {
+	switch (error_code) {
+	case DESC_ERR_NO_ERR:
+		return 0;
+	case DESC_ERR_K_P_OUT_OF_RANGE:
+		rte_bbdev_log(ERR, "Encode block size K' is out of range");
+		break;
+	case DESC_ERR_Z_C_NOT_LEGAL:
+		rte_bbdev_log(ERR, "Zc is illegal");
+		break;
+	case DESC_ERR_DESC_OFFSET_ERR:
+		rte_bbdev_log(ERR,
+				"Queue offset does not meet the expectation in the FPGA"
+				);
+		break;
+	case DESC_ERR_DESC_READ_FAIL:
+		rte_bbdev_log(ERR, "Unsuccessful completion for descriptor read");
+		break;
+	case DESC_ERR_DESC_READ_TIMEOUT:
+		rte_bbdev_log(ERR, "Descriptor read time-out");
+		break;
+	case DESC_ERR_DESC_READ_TLP_POISONED:
+		rte_bbdev_log(ERR, "Descriptor read TLP poisoned");
+		break;
+	case DESC_ERR_CB_READ_FAIL:
+		rte_bbdev_log(ERR, "Unsuccessful completion for code block");
+		break;
+	case DESC_ERR_CB_READ_TIMEOUT:
+		rte_bbdev_log(ERR, "Code block read time-out");
+		break;
+	case DESC_ERR_CB_READ_TLP_POISONED:
+		rte_bbdev_log(ERR, "Code block read TLP poisoned");
+		break;
+	case DESC_ERR_HBSTORE_ERR:
+		rte_bbdev_log(ERR, "Hbstroe exceeds HARQ buffer size.");
+		break;
+	default:
+		rte_bbdev_log(ERR, "Descriptor error unknown error code %u",
+				error_code);
+		break;
+	}
+	return 1;
+}
+
 /* Compute value of k0.
  * Based on 3GPP 38.212 Table 5.4.2.1-2
  * Starting position of different redundancy versions, k0
@@ -1085,6 +1133,11 @@
 
 	rte_bbdev_log_debug("DMA response desc %p", desc);
 
+	*op = desc->enc_req.op_addr;
+	/* Check the descriptor error field, return 1 on error */
+	desc_error = check_desc_error(desc->enc_req.error);
+	(*op)->status = desc_error << RTE_BBDEV_DATA_ERROR;
+
 	return 1;
 }
 
@@ -1121,6 +1174,9 @@
 		(*op)->status = 1 << RTE_BBDEV_CRC_ERROR;
 	/* et_pass = 0 when decoder fails */
 	(*op)->status |= !(desc->dec_req.et_pass) << RTE_BBDEV_SYNDROME_ERROR;
+	/* Check the descriptor error field, return 1 on error */
+	desc_error = check_desc_error(desc->dec_req.error);
+	(*op)->status |= desc_error << RTE_BBDEV_DATA_ERROR;
 	return 1;
 }
 
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [dpdk-dev] [PATCH v1 09/13] baseband/fpga_5gnr_fec: add debug functionality
  2020-03-29 20:18 [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
                   ` (7 preceding siblings ...)
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 08/13] baseband/fpga_5gnr_fec: add HW error capture Nicolas Chautru
@ 2020-03-29 20:18 ` Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 10/13] baseband/fpga_5gnr_fec: add configure function Nicolas Chautru
                   ` (3 subsequent siblings)
  12 siblings, 0 replies; 14+ messages in thread
From: Nicolas Chautru @ 2020-03-29 20:18 UTC (permalink / raw)
  To: dev; +Cc: Nicolas Chautru

Adding functionality for debug mode to be more
verbose and catch error from unsupported configuration.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 364 +++++++++++++++++++++
 1 file changed, 364 insertions(+)

diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
index 64d32e4..389257d 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
@@ -109,6 +109,169 @@
 	return rte_le_to_cpu_32(ret);
 }
 
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+
+/* Read a register of FPGA 5GNR FEC device */
+static uint16_t
+fpga_reg_read_16(void *mmio_base, uint32_t offset)
+{
+	void *reg_addr = RTE_PTR_ADD(mmio_base, offset);
+	uint16_t ret = *((volatile uint16_t *)(reg_addr));
+	return rte_le_to_cpu_16(ret);
+}
+
+/* Read Ring Control Register of FPGA 5GNR FEC device */
+static inline void
+print_ring_reg_debug_info(void *mmio_base, uint32_t offset)
+{
+	rte_bbdev_log_debug(
+		"FPGA MMIO base address @ %p | Ring Control Register @ offset = 0x%08"
+		PRIx32, mmio_base, offset);
+	rte_bbdev_log_debug(
+		"RING_BASE_ADDR = 0x%016"PRIx64,
+		fpga_reg_read_64(mmio_base, offset));
+	rte_bbdev_log_debug(
+		"RING_HEAD_ADDR = 0x%016"PRIx64,
+		fpga_reg_read_64(mmio_base, offset +
+				FPGA_5GNR_FEC_RING_HEAD_ADDR));
+	rte_bbdev_log_debug(
+		"RING_SIZE = 0x%04"PRIx16,
+		fpga_reg_read_16(mmio_base, offset +
+				FPGA_5GNR_FEC_RING_SIZE));
+	rte_bbdev_log_debug(
+		"RING_MISC = 0x%02"PRIx8,
+		fpga_reg_read_8(mmio_base, offset +
+				FPGA_5GNR_FEC_RING_MISC));
+	rte_bbdev_log_debug(
+		"RING_ENABLE = 0x%02"PRIx8,
+		fpga_reg_read_8(mmio_base, offset +
+				FPGA_5GNR_FEC_RING_ENABLE));
+	rte_bbdev_log_debug(
+		"RING_FLUSH_QUEUE_EN = 0x%02"PRIx8,
+		fpga_reg_read_8(mmio_base, offset +
+				FPGA_5GNR_FEC_RING_FLUSH_QUEUE_EN));
+	rte_bbdev_log_debug(
+		"RING_SHADOW_TAIL = 0x%04"PRIx16,
+		fpga_reg_read_16(mmio_base, offset +
+				FPGA_5GNR_FEC_RING_SHADOW_TAIL));
+	rte_bbdev_log_debug(
+		"RING_HEAD_POINT = 0x%04"PRIx16,
+		fpga_reg_read_16(mmio_base, offset +
+				FPGA_5GNR_FEC_RING_HEAD_POINT));
+}
+
+/* Read Static Register of FPGA 5GNR FEC device */
+static inline void
+print_static_reg_debug_info(void *mmio_base)
+{
+	uint16_t config = fpga_reg_read_16(mmio_base,
+			FPGA_5GNR_FEC_CONFIGURATION);
+	uint8_t qmap_done = fpga_reg_read_8(mmio_base,
+			FPGA_5GNR_FEC_QUEUE_PF_VF_MAP_DONE);
+	uint16_t lb_factor = fpga_reg_read_16(mmio_base,
+			FPGA_5GNR_FEC_LOAD_BALANCE_FACTOR);
+	uint16_t ring_desc_len = fpga_reg_read_16(mmio_base,
+			FPGA_5GNR_FEC_RING_DESC_LEN);
+	uint16_t flr_time_out = fpga_reg_read_16(mmio_base,
+			FPGA_5GNR_FEC_FLR_TIME_OUT);
+
+	rte_bbdev_log_debug("UL.DL Weights = %u.%u",
+			((uint8_t)config), ((uint8_t)(config >> 8)));
+	rte_bbdev_log_debug("UL.DL Load Balance = %u.%u",
+			((uint8_t)lb_factor), ((uint8_t)(lb_factor >> 8)));
+	rte_bbdev_log_debug("Queue-PF/VF Mapping Table = %s",
+			(qmap_done > 0) ? "READY" : "NOT-READY");
+	rte_bbdev_log_debug("Ring Descriptor Size = %u bytes",
+			ring_desc_len*FPGA_RING_DESC_LEN_UNIT_BYTES);
+	rte_bbdev_log_debug("FLR Timeout = %f usec",
+			(float)flr_time_out*FPGA_FLR_TIMEOUT_UNIT);
+}
+
+/* Print decode DMA Descriptor of FPGA 5GNR Decoder device */
+static void
+print_dma_dec_desc_debug_info(union fpga_dma_desc *desc)
+{
+	rte_bbdev_log_debug("DMA response desc %p\n"
+		"\t-- done(%"PRIu32") | iter(%"PRIu32") | et_pass(%"PRIu32")"
+		" | crcb_pass (%"PRIu32") | error(%"PRIu32")\n"
+		"\t-- qm_idx(%"PRIu32") | max_iter(%"PRIu32") | "
+		"bg_idx (%"PRIu32") | harqin_en(%"PRIu32") | zc(%"PRIu32")\n"
+		"\t-- hbstroe_offset(%"PRIu32") | num_null (%"PRIu32") "
+		"| irq_en(%"PRIu32")\n"
+		"\t-- ncb(%"PRIu32") | desc_idx (%"PRIu32") | "
+		"drop_crc24b(%"PRIu32") | RV (%"PRIu32")\n"
+		"\t-- crc24b_ind(%"PRIu32") | et_dis (%"PRIu32")\n"
+		"\t-- harq_input_length(%"PRIu32") | rm_e(%"PRIu32")\n"
+		"\t-- cbs_in_op(%"PRIu32") | in_add (0x%08"PRIx32"%08"PRIx32")"
+		"| out_add (0x%08"PRIx32"%08"PRIx32")",
+		desc,
+		(uint32_t)desc->dec_req.done,
+		(uint32_t)desc->dec_req.iter,
+		(uint32_t)desc->dec_req.et_pass,
+		(uint32_t)desc->dec_req.crcb_pass,
+		(uint32_t)desc->dec_req.error,
+		(uint32_t)desc->dec_req.qm_idx,
+		(uint32_t)desc->dec_req.max_iter,
+		(uint32_t)desc->dec_req.bg_idx,
+		(uint32_t)desc->dec_req.harqin_en,
+		(uint32_t)desc->dec_req.zc,
+		(uint32_t)desc->dec_req.hbstroe_offset,
+		(uint32_t)desc->dec_req.num_null,
+		(uint32_t)desc->dec_req.irq_en,
+		(uint32_t)desc->dec_req.ncb,
+		(uint32_t)desc->dec_req.desc_idx,
+		(uint32_t)desc->dec_req.drop_crc24b,
+		(uint32_t)desc->dec_req.rv,
+		(uint32_t)desc->dec_req.crc24b_ind,
+		(uint32_t)desc->dec_req.et_dis,
+		(uint32_t)desc->dec_req.harq_input_length,
+		(uint32_t)desc->dec_req.rm_e,
+		(uint32_t)desc->dec_req.cbs_in_op,
+		(uint32_t)desc->dec_req.in_addr_hi,
+		(uint32_t)desc->dec_req.in_addr_lw,
+		(uint32_t)desc->dec_req.out_addr_hi,
+		(uint32_t)desc->dec_req.out_addr_lw);
+	uint32_t *word = (uint32_t *) desc;
+	rte_bbdev_log_debug("%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n"
+			"%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n",
+			word[0], word[1], word[2], word[3],
+			word[4], word[5], word[6], word[7]);
+}
+
+/* Print decode DMA Descriptor of FPGA 5GNR encoder device */
+static void
+print_dma_enc_desc_debug_info(union fpga_dma_desc *desc)
+{
+	rte_bbdev_log_debug("DMA response desc %p\n"
+			"%"PRIu32" %"PRIu32"\n"
+			"K' %"PRIu32" E %"PRIu32" desc %"PRIu32" Z %"PRIu32"\n"
+			"BG %"PRIu32" Qm %"PRIu32" CRC %"PRIu32" IRQ %"PRIu32"\n"
+			"k0 %"PRIu32" Ncb %"PRIu32" F %"PRIu32"\n",
+			desc,
+			(uint32_t)desc->enc_req.done,
+			(uint32_t)desc->enc_req.error,
+
+			(uint32_t)desc->enc_req.k_,
+			(uint32_t)desc->enc_req.rm_e,
+			(uint32_t)desc->enc_req.desc_idx,
+			(uint32_t)desc->enc_req.zc,
+
+			(uint32_t)desc->enc_req.bg_idx,
+			(uint32_t)desc->enc_req.qm_idx,
+			(uint32_t)desc->enc_req.crc_en,
+			(uint32_t)desc->enc_req.irq_en,
+
+			(uint32_t)desc->enc_req.k0,
+			(uint32_t)desc->enc_req.ncb,
+			(uint32_t)desc->enc_req.num_null);
+	uint32_t *word = (uint32_t *) desc;
+	rte_bbdev_log_debug("%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n"
+			"%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n%08"PRIx32"\n",
+			word[0], word[1], word[2], word[3],
+			word[4], word[5], word[6], word[7]);
+}
+
+#endif
 
 static int
 fpga_setup_queues(struct rte_bbdev *dev, uint16_t num_queues, int socket_id)
@@ -445,6 +608,10 @@
 	rte_bbdev_log_debug("BBDEV queue[%d] set up for FPGA queue[%d]",
 			queue_id, q_idx);
 
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	/* Read FPGA Ring Control Registers after configuration*/
+	print_ring_reg_debug_info(d->mmio_base, ring_offset);
+#endif
 	return 0;
 }
 
@@ -569,6 +736,7 @@
 	.queue_start = fpga_queue_start,
 	.queue_release = fpga_queue_release,
 };
+
 static inline void
 fpga_dma_enqueue(struct fpga_queue *q, uint16_t num_desc,
 		struct rte_bbdev_stats *queue_stats)
@@ -813,6 +981,96 @@
 	return 0;
 }
 
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+/* Validates LDPC encoder parameters */
+static int
+validate_enc_op(struct rte_bbdev_enc_op *op __rte_unused)
+{
+	struct rte_bbdev_op_ldpc_enc *ldpc_enc = &op->ldpc_enc;
+	struct rte_bbdev_op_enc_ldpc_cb_params *cb = NULL;
+	struct rte_bbdev_op_enc_ldpc_tb_params *tb = NULL;
+
+
+	if (ldpc_enc->input.length >
+			RTE_BBDEV_LDPC_MAX_CB_SIZE >> 3) {
+		rte_bbdev_log(ERR, "CB size (%u) is too big, max: %d",
+				ldpc_enc->input.length,
+				RTE_BBDEV_LDPC_MAX_CB_SIZE);
+		return -1;
+	}
+
+	if (op->mempool == NULL) {
+		rte_bbdev_log(ERR, "Invalid mempool pointer");
+		return -1;
+	}
+	if (ldpc_enc->input.data == NULL) {
+		rte_bbdev_log(ERR, "Invalid input pointer");
+		return -1;
+	}
+	if (ldpc_enc->output.data == NULL) {
+		rte_bbdev_log(ERR, "Invalid output pointer");
+		return -1;
+	}
+	if ((ldpc_enc->basegraph > 2) || (ldpc_enc->basegraph == 0)) {
+		rte_bbdev_log(ERR,
+				"basegraph (%u) is out of range 1 <= value <= 2",
+				ldpc_enc->basegraph);
+		return -1;
+	}
+	if (ldpc_enc->code_block_mode > 1) {
+		rte_bbdev_log(ERR,
+				"code_block_mode (%u) is out of range 0:Tb 1:CB",
+				ldpc_enc->code_block_mode);
+		return -1;
+	}
+
+	if (ldpc_enc->code_block_mode == 0) {
+		tb = &ldpc_enc->tb_params;
+		if (tb->c == 0) {
+			rte_bbdev_log(ERR,
+					"c (%u) is out of range 1 <= value <= %u",
+					tb->c, RTE_BBDEV_LDPC_MAX_CODE_BLOCKS);
+			return -1;
+		}
+		if (tb->cab > tb->c) {
+			rte_bbdev_log(ERR,
+					"cab (%u) is greater than c (%u)",
+					tb->cab, tb->c);
+			return -1;
+		}
+		if ((tb->ea < RTE_BBDEV_LDPC_MIN_CB_SIZE)
+				&& tb->r < tb->cab) {
+			rte_bbdev_log(ERR,
+					"ea (%u) is less than %u or it is not even",
+					tb->ea, RTE_BBDEV_LDPC_MIN_CB_SIZE);
+			return -1;
+		}
+		if ((tb->eb < RTE_BBDEV_LDPC_MIN_CB_SIZE)
+				&& tb->c > tb->cab) {
+			rte_bbdev_log(ERR,
+					"eb (%u) is less than %u",
+					tb->eb, RTE_BBDEV_LDPC_MIN_CB_SIZE);
+			return -1;
+		}
+		if (tb->r > (tb->c - 1)) {
+			rte_bbdev_log(ERR,
+					"r (%u) is greater than c - 1 (%u)",
+					tb->r, tb->c - 1);
+			return -1;
+		}
+	} else {
+		cb = &ldpc_enc->cb_params;
+		if (cb->e < RTE_BBDEV_LDPC_MIN_CB_SIZE) {
+			rte_bbdev_log(ERR,
+					"e (%u) is less than %u or it is not even",
+					cb->e, RTE_BBDEV_LDPC_MIN_CB_SIZE);
+			return -1;
+		}
+	}
+	return 0;
+}
+#endif
+
 static inline char *
 mbuf_append(struct rte_mbuf *m_head, struct rte_mbuf *m, uint16_t len)
 {
@@ -825,6 +1083,69 @@
 	return tail;
 }
 
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+/* Validates LDPC decoder parameters */
+static int
+validate_dec_op(struct rte_bbdev_dec_op *op __rte_unused)
+{
+	struct rte_bbdev_op_ldpc_dec *ldpc_dec = &op->ldpc_dec;
+	struct rte_bbdev_op_dec_ldpc_cb_params *cb = NULL;
+	struct rte_bbdev_op_dec_ldpc_tb_params *tb = NULL;
+
+	if (op->mempool == NULL) {
+		rte_bbdev_log(ERR, "Invalid mempool pointer");
+		return -1;
+	}
+	if (ldpc_dec->rv_index > 3) {
+		rte_bbdev_log(ERR,
+				"rv_index (%u) is out of range 0 <= value <= 3",
+				ldpc_dec->rv_index);
+		return -1;
+	}
+
+	if (ldpc_dec->iter_max == 0) {
+		rte_bbdev_log(ERR,
+				"iter_max (%u) is equal to 0",
+				ldpc_dec->iter_max);
+		return -1;
+	}
+
+	if (ldpc_dec->code_block_mode > 1) {
+		rte_bbdev_log(ERR,
+				"code_block_mode (%u) is out of range 0 <= value <= 1",
+				ldpc_dec->code_block_mode);
+		return -1;
+	}
+
+	if (ldpc_dec->code_block_mode == 0) {
+		tb = &ldpc_dec->tb_params;
+		if (tb->c < 1) {
+			rte_bbdev_log(ERR,
+					"c (%u) is out of range 1 <= value <= %u",
+					tb->c, RTE_BBDEV_LDPC_MAX_CODE_BLOCKS);
+			return -1;
+		}
+		if (tb->cab > tb->c) {
+			rte_bbdev_log(ERR,
+					"cab (%u) is greater than c (%u)",
+					tb->cab, tb->c);
+			return -1;
+		}
+	} else {
+		cb = &ldpc_dec->cb_params;
+		if (cb->e < RTE_BBDEV_LDPC_MIN_CB_SIZE) {
+			rte_bbdev_log(ERR,
+					"e (%u) is out of range %u <= value <= %u",
+					cb->e, RTE_BBDEV_LDPC_MIN_CB_SIZE,
+					RTE_BBDEV_LDPC_MAX_CB_SIZE);
+			return -1;
+		}
+	}
+
+	return 0;
+}
+#endif
+
 static inline int
 enqueue_ldpc_enc_one_op_cb(struct fpga_queue *q, struct rte_bbdev_enc_op *op,
 		uint16_t desc_offset)
@@ -843,6 +1164,15 @@
 	uint16_t ring_offset;
 	uint16_t K, k_;
 
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	/* Validate op structure */
+	/* FIXME */
+	if (validate_enc_op(op) == -1) {
+		rte_bbdev_log(ERR, "LDPC encoder validation failed");
+		return -EINVAL;
+	}
+#endif
+
 	/* Clear op status */
 	op->status = 0;
 
@@ -904,6 +1234,9 @@
 		return -1;
 	}
 
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	print_dma_enc_desc_debug_info(desc);
+#endif
 	return 1;
 }
 
@@ -926,6 +1259,14 @@
 	uint16_t out_offset = dec->hard_output.offset;
 	uint32_t harq_offset = 0;
 
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+		/* Validate op structure */
+		if (validate_dec_op(op) == -1) {
+			rte_bbdev_log(ERR, "LDPC decoder validation failed");
+			return -EINVAL;
+		}
+#endif
+
 	/* Clear op status */
 	op->status = 0;
 
@@ -997,6 +1338,10 @@
 		return -1;
 	}
 
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	print_dma_dec_desc_debug_info(desc);
+#endif
+
 	return 1;
 }
 
@@ -1133,6 +1478,10 @@
 
 	rte_bbdev_log_debug("DMA response desc %p", desc);
 
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	print_dma_enc_desc_debug_info(desc);
+#endif
+
 	*op = desc->enc_req.op_addr;
 	/* Check the descriptor error field, return 1 on error */
 	desc_error = check_desc_error(desc->enc_req.error);
@@ -1159,6 +1508,10 @@
 	/* make sure the response is read atomically */
 	rte_smp_rmb();
 
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	print_dma_dec_desc_debug_info(desc);
+#endif
+
 	*op = desc->dec_req.op_addr;
 
 	if (check_bit((*op)->ldpc_dec.op_flags,
@@ -1314,6 +1667,17 @@
 	rte_bbdev_log_debug("bbdev id = %u [%s]",
 			bbdev->data->dev_id, dev_name);
 
+	struct fpga_5gnr_fec_device *d = bbdev->data->dev_private;
+	uint32_t version_id = fpga_reg_read_32(d->mmio_base,
+			FPGA_5GNR_FEC_VERSION_ID);
+	rte_bbdev_log(INFO, "FEC FPGA RTL v%u.%u",
+		((uint16_t)(version_id >> 16)), ((uint16_t)version_id));
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	if (!strcmp(bbdev->device->driver->name,
+			RTE_STR(FPGA_5GNR_FEC_PF_DRIVER_NAME)))
+		print_static_reg_debug_info(d->mmio_base);
+#endif
 	return 0;
 }
 
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [dpdk-dev] [PATCH v1 10/13] baseband/fpga_5gnr_fec: add configure function
  2020-03-29 20:18 [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
                   ` (8 preceding siblings ...)
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 09/13] baseband/fpga_5gnr_fec: add debug functionality Nicolas Chautru
@ 2020-03-29 20:18 ` Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 11/13] baseband/fpga_5gnr_fec: add harq loopback capability Nicolas Chautru
                   ` (2 subsequent siblings)
  12 siblings, 0 replies; 14+ messages in thread
From: Nicolas Chautru @ 2020-03-29 20:18 UTC (permalink / raw)
  To: dev; +Cc: Nicolas Chautru

Add configure function to configure the PF from within
the bbdev-test itself without external application
configuration the device.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 app/test-bbdev/test_bbdev_perf.c                   |  57 ++++++
 doc/guides/bbdevs/fpga_5gnr_fec.rst                | 123 +++++++++++++
 drivers/baseband/fpga_5gnr_fec/Makefile            |   3 +
 drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h     |  74 ++++++++
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 196 +++++++++++++++++++++
 .../rte_pmd_bbdev_fpga_5gnr_fec_version.map        |   7 +
 6 files changed, 460 insertions(+)
 create mode 100644 drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h

diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c
index d8db58e..19ad65c 100644
--- a/app/test-bbdev/test_bbdev_perf.c
+++ b/app/test-bbdev/test_bbdev_perf.c
@@ -42,6 +42,19 @@
 #define FLR_TIMEOUT 610
 #endif
 
+#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC
+#include <fpga_5gnr_fec.h>
+#define FPGA_5GNR_PF_DRIVER_NAME ("intel_fpga_5gnr_fec_pf")
+#define FPGA_5GNR_VF_DRIVER_NAME ("intel_fpga_5gnr_fec_vf")
+#define VF_UL_5G_QUEUE_VALUE 4
+#define VF_DL_5G_QUEUE_VALUE 4
+#define UL_5G_BANDWIDTH 3
+#define DL_5G_BANDWIDTH 3
+#define UL_5G_LOAD_BALANCE 128
+#define DL_5G_LOAD_BALANCE 128
+#define FLR_5G_TIMEOUT 610
+#endif
+
 #define OPS_CACHE_SIZE 256U
 #define OPS_POOL_SIZE_MIN 511U /* 0.5K per queue */
 
@@ -563,6 +576,50 @@ typedef int (test_case_function)(struct active_device *ad,
 				info->dev_name);
 	}
 #endif
+#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC
+	if ((get_init_device() == true) &&
+		(!strcmp(info->drv.driver_name, FPGA_5GNR_PF_DRIVER_NAME))) {
+		struct fpga_5gnr_fec_conf conf;
+		unsigned int i;
+
+		printf("Configure FPGA 5GNR FEC Driver %s with default values\n",
+				info->drv.driver_name);
+
+		/* clear default configuration before initialization */
+		memset(&conf, 0, sizeof(struct fpga_5gnr_fec_conf));
+
+		/* Set PF mode :
+		 * true if PF is used for data plane
+		 * false for VFs
+		 */
+		conf.pf_mode_en = true;
+
+		for (i = 0; i < FPGA_5GNR_FEC_NUM_VFS; ++i) {
+			/* Number of UL queues per VF (fpga supports 8 VFs) */
+			conf.vf_ul_queues_number[i] = VF_UL_5G_QUEUE_VALUE;
+			/* Number of DL queues per VF (fpga supports 8 VFs) */
+			conf.vf_dl_queues_number[i] = VF_DL_5G_QUEUE_VALUE;
+		}
+
+		/* UL bandwidth. Needed for schedule algorithm */
+		conf.ul_bandwidth = UL_5G_BANDWIDTH;
+		/* DL bandwidth */
+		conf.dl_bandwidth = DL_5G_BANDWIDTH;
+
+		/* UL & DL load Balance Factor to 64 */
+		conf.ul_load_balance = UL_5G_LOAD_BALANCE;
+		conf.dl_load_balance = DL_5G_LOAD_BALANCE;
+
+		/**< FLR timeout value */
+		conf.flr_time_out = FLR_5G_TIMEOUT;
+
+		/* setup FPGA PF with configuration information */
+		ret = fpga_5gnr_fec_configure(info->dev_name, &conf);
+		TEST_ASSERT_SUCCESS(ret,
+				"Failed to configure 5G FPGA PF for bbdev %s",
+				info->dev_name);
+	}
+#endif
 	nb_queues = RTE_MIN(rte_lcore_count(), info->drv.max_num_queues);
 	nb_queues = RTE_MIN(nb_queues, (unsigned int) MAX_QUEUES);
 
diff --git a/doc/guides/bbdevs/fpga_5gnr_fec.rst b/doc/guides/bbdevs/fpga_5gnr_fec.rst
index 7eab7a4..5641b1a 100644
--- a/doc/guides/bbdevs/fpga_5gnr_fec.rst
+++ b/doc/guides/bbdevs/fpga_5gnr_fec.rst
@@ -166,6 +166,129 @@ name is different:
   echo <num-of-vfs> > /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/sriov_numvfs
 
 
+Configure the VFs through PF
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The PCI virtual functions must be configured before working or getting assigned
+to VMs/Containers. The configuration involves allocating the number of hardware
+queues, priorities, load balance, bandwidth and other settings necessary for the
+device to perform FEC functions.
+
+This configuration needs to be executed at least once after reboot or PCI FLR and can
+be achieved by using the function ``fpga_5gnr_fec_configure()``, which sets up the
+parameters defined in ``fpga_5gnr_fec_conf`` structure:
+
+.. code-block:: c
+
+  struct fpga_5gnr_fec_conf {
+      bool pf_mode_en;
+      uint8_t vf_ul_queues_number[FPGA_5GNR_FEC_NUM_VFS];
+      uint8_t vf_dl_queues_number[FPGA_5GNR_FEC_NUM_VFS];
+      uint8_t ul_bandwidth;
+      uint8_t dl_bandwidth;
+      uint8_t ul_load_balance;
+      uint8_t dl_load_balance;
+      uint16_t flr_time_out;
+  };
+
+- ``pf_mode_en``: identifies whether only PF is to be used, or the VFs. PF and
+  VFs are mutually exclusive and cannot run simultaneously.
+  Set to 1 for PF mode enabled.
+  If PF mode is enabled all queues available in the device are assigned
+  exclusively to PF and 0 queues given to VFs.
+
+- ``vf_*l_queues_number``: defines the hardware queue mapping for every VF.
+
+- ``*l_bandwidth``: in case of congestion on PCIe interface. The device
+  allocates different bandwidth to UL and DL. The weight is configured by this
+  setting. The unit of weight is 3 code blocks. For example, if the code block
+  cbps (code block per second) ratio between UL and DL is 12:1, then the
+  configuration value should be set to 36:3. The schedule algorithm is based
+  on code block regardless the length of each block.
+
+- ``*l_load_balance``: hardware queues are load-balanced in a round-robin
+  fashion. Queues get filled first-in first-out until they reach a pre-defined
+  watermark level, if exceeded, they won't get assigned new code blocks..
+  This watermark is defined by this setting.
+
+  If all hardware queues exceeds the watermark, no code blocks will be
+  streamed in from UL/DL code block FIFO.
+
+- ``flr_time_out``: specifies how many 16.384us to be FLR time out. The
+  time_out = flr_time_out x 16.384us. For instance, if you want to set 10ms for
+  the FLR time out then set this setting to 0x262=610.
+
+
+An example configuration code calling the function ``fpga_5gnr_fec_configure()`` is shown
+below:
+
+.. code-block:: c
+
+  struct fpga_5gnr_fec_conf conf;
+  unsigned int i;
+
+  memset(&conf, 0, sizeof(struct fpga_5gnr_fec_conf));
+  conf.pf_mode_en = 1;
+
+  for (i = 0; i < FPGA_5GNR_FEC_NUM_VFS; ++i) {
+      conf.vf_ul_queues_number[i] = 4;
+      conf.vf_dl_queues_number[i] = 4;
+  }
+  conf.ul_bandwidth = 12;
+  conf.dl_bandwidth = 5;
+  conf.dl_load_balance = 64;
+  conf.ul_load_balance = 64;
+
+  /* setup FPGA PF */
+  ret = fpga_5gnr_fec_configure(info->dev_name, &conf);
+  TEST_ASSERT_SUCCESS(ret,
+      "Failed to configure 4G FPGA PF for bbdev %s",
+      info->dev_name);
+
+
+Test Application
+----------------
+
+BBDEV provides a test application, ``test-bbdev.py`` and range of test data for testing
+the functionality of FPGA 5GNR FEC encode and decode, depending on the device's
+capabilities. The test application is located under app->test-bbdev folder and has the
+following options:
+
+.. code-block:: console
+
+  "-p", "--testapp-path": specifies path to the bbdev test app.
+  "-e", "--eal-params"	: EAL arguments which are passed to the test app.
+  "-t", "--timeout"	: Timeout in seconds (default=300).
+  "-c", "--test-cases"	: Defines test cases to run. Run all if not specified.
+  "-v", "--test-vector"	: Test vector path (default=dpdk_path+/app/test-bbdev/test_vectors/bbdev_null.data).
+  "-n", "--num-ops"	: Number of operations to process on device (default=32).
+  "-b", "--burst-size"	: Operations enqueue/dequeue burst size (default=32).
+  "-l", "--num-lcores"	: Number of lcores to run (default=16).
+  "-i", "--init-device" : Initialise PF device with default values.
+
+
+To execute the test application tool using simple decode or encode data,
+type one of the following:
+
+.. code-block:: console
+
+  ./test-bbdev.py -c validation -n 64 -b 1 -v ./ldpc_dec_default.data
+  ./test-bbdev.py -c validation -n 64 -b 1 -v ./ldpc_enc_default.data
+
+
+The test application ``test-bbdev.py``, supports the ability to configure the PF device with
+a default set of values, if the "-i" or "- -init-device" option is included. The default values
+are defined in test_bbdev_perf.c as:
+
+- VF_UL_QUEUE_VALUE 4
+- VF_DL_QUEUE_VALUE 4
+- UL_BANDWIDTH 3
+- DL_BANDWIDTH 3
+- UL_LOAD_BALANCE 128
+- DL_LOAD_BALANCE 128
+- FLR_TIMEOUT 610
+
+
 Test Vectors
 ~~~~~~~~~~~~
 
diff --git a/drivers/baseband/fpga_5gnr_fec/Makefile b/drivers/baseband/fpga_5gnr_fec/Makefile
index 3f5c511..b68a79f 100644
--- a/drivers/baseband/fpga_5gnr_fec/Makefile
+++ b/drivers/baseband/fpga_5gnr_fec/Makefile
@@ -23,4 +23,7 @@ LIBABIVER := 1
 # library source files
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC) += rte_fpga_5gnr_fec.c
 
+# export include files
+SYMLINK-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC)-include += fpga_5gnr_fec.h
+
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h b/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
new file mode 100644
index 0000000..7eebc7d
--- /dev/null
+++ b/drivers/baseband/fpga_5gnr_fec/fpga_5gnr_fec.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+#ifndef _FPGA_5GNR_FEC_H_
+#define _FPGA_5GNR_FEC_H_
+
+#include <stdint.h>
+#include <stdbool.h>
+
+/**
+ * @file fpga_5gnr_fec.h
+ *
+ * Interface for Intel(R) FGPA 5GNR FEC device configuration at the host level,
+ * directly accessible by the application.
+ * Configuration related to 5GNR functionality is done through
+ * librte_bbdev library.
+ *
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**< Number of Virtual Functions FGPA 4G FEC supports */
+#define FPGA_5GNR_FEC_NUM_VFS 8
+
+/**
+ * Structure to pass FPGA 4G FEC configuration.
+ */
+struct fpga_5gnr_fec_conf {
+	/**< 1 if PF is used for dataplane, 0 for VFs */
+	bool pf_mode_en;
+	/**< Number of UL queues per VF */
+	uint8_t vf_ul_queues_number[FPGA_5GNR_FEC_NUM_VFS];
+	/**< Number of DL queues per VF */
+	uint8_t vf_dl_queues_number[FPGA_5GNR_FEC_NUM_VFS];
+	/**< UL bandwidth. Needed for schedule algorithm */
+	uint8_t ul_bandwidth;
+	/**< DL bandwidth. Needed for schedule algorithm */
+	uint8_t dl_bandwidth;
+	/**< UL Load Balance */
+	uint8_t ul_load_balance;
+	/**< DL Load Balance */
+	uint8_t dl_load_balance;
+	/**< FLR timeout value */
+	uint16_t flr_time_out;
+};
+
+/**
+ * Configure Intel(R) FPGA 5GNR FEC device
+ *
+ * @param dev_name
+ *   The name of the device. This is the short form of PCI BDF, e.g. 00:01.0.
+ *   It can also be retrieved for a bbdev device from the dev_name field in the
+ *   rte_bbdev_info structure returned by rte_bbdev_info_get().
+ * @param conf
+ *   Configuration to apply to FPGA 4G FEC.
+ *
+ * @return
+ *   Zero on success, negative value on failure.
+ */
+__rte_experimental
+int
+fpga_5gnr_fec_configure(const char *dev_name,
+		const struct fpga_5gnr_fec_conf *conf);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _FPGA_5GNR_FEC_H_ */
diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
index 389257d..2559da5 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
@@ -21,6 +21,7 @@
 #include <rte_bbdev_pmd.h>
 
 #include "rte_fpga_5gnr_fec.h"
+#include "fpga_5gnr_fec.h"
 
 /* 5GNR SW PMD logging ID */
 static int fpga_5gnr_fec_logtype;
@@ -1722,6 +1723,201 @@
 	return 0;
 }
 
+static inline void
+set_default_fpga_conf(struct fpga_5gnr_fec_conf *def_conf)
+{
+	/* clear default configuration before initialization */
+	memset(def_conf, 0, sizeof(struct fpga_5gnr_fec_conf));
+	/* Set pf mode to true */
+	def_conf->pf_mode_en = true;
+
+	/* Set ratio between UL and DL to 1:1 (unit of weight is 3 CBs) */
+	def_conf->ul_bandwidth = 3;
+	def_conf->dl_bandwidth = 3;
+
+	/* Set Load Balance Factor to 64 */
+	def_conf->dl_load_balance = 64;
+	def_conf->ul_load_balance = 64;
+}
+
+/* Initial configuration of FPGA 5GNR FEC device */
+int
+fpga_5gnr_fec_configure(const char *dev_name,
+		const struct fpga_5gnr_fec_conf *conf)
+{
+	uint32_t payload_32, address;
+	uint16_t payload_16;
+	uint8_t payload_8;
+	uint16_t q_id, vf_id, total_q_id, total_ul_q_id, total_dl_q_id;
+	struct rte_bbdev *bbdev = rte_bbdev_get_named_dev(dev_name);
+	struct fpga_5gnr_fec_conf def_conf;
+
+	if (bbdev == NULL) {
+		rte_bbdev_log(ERR,
+				"Invalid dev_name (%s), or device is not yet initialised",
+				dev_name);
+		return -ENODEV;
+	}
+
+	struct fpga_5gnr_fec_device *d = bbdev->data->dev_private;
+
+	if (conf == NULL) {
+		rte_bbdev_log(ERR,
+				"FPGA Configuration was not provided. Default configuration will be loaded.");
+		set_default_fpga_conf(&def_conf);
+		conf = &def_conf;
+	}
+
+	/*
+	 * Configure UL:DL ratio.
+	 * [7:0]: UL weight
+	 * [15:8]: DL weight
+	 */
+	payload_16 = (conf->dl_bandwidth << 8) | conf->ul_bandwidth;
+	address = FPGA_5GNR_FEC_CONFIGURATION;
+	fpga_reg_write_16(d->mmio_base, address, payload_16);
+
+	/* Clear all queues registers */
+	payload_32 = FPGA_INVALID_HW_QUEUE_ID;
+	for (q_id = 0; q_id < FPGA_TOTAL_NUM_QUEUES; ++q_id) {
+		address = (q_id << 2) + FPGA_5GNR_FEC_QUEUE_MAP;
+		fpga_reg_write_32(d->mmio_base, address, payload_32);
+	}
+
+	/*
+	 * If PF mode is enabled allocate all queues for PF only.
+	 *
+	 * For VF mode each VF can have different number of UL and DL queues.
+	 * Total number of queues to configure cannot exceed FPGA
+	 * capabilities - 64 queues - 32 queues for UL and 32 queues for DL.
+	 * Queues mapping is done according to configuration:
+	 *
+	 * UL queues:
+	 * |                Q_ID              | VF_ID |
+	 * |                 0                |   0   |
+	 * |                ...               |   0   |
+	 * | conf->vf_dl_queues_number[0] - 1 |   0   |
+	 * | conf->vf_dl_queues_number[0]     |   1   |
+	 * |                ...               |   1   |
+	 * | conf->vf_dl_queues_number[1] - 1 |   1   |
+	 * |                ...               |  ...  |
+	 * | conf->vf_dl_queues_number[7] - 1 |   7   |
+	 *
+	 * DL queues:
+	 * |                Q_ID              | VF_ID |
+	 * |                 32               |   0   |
+	 * |                ...               |   0   |
+	 * | conf->vf_ul_queues_number[0] - 1 |   0   |
+	 * | conf->vf_ul_queues_number[0]     |   1   |
+	 * |                ...               |   1   |
+	 * | conf->vf_ul_queues_number[1] - 1 |   1   |
+	 * |                ...               |  ...  |
+	 * | conf->vf_ul_queues_number[7] - 1 |   7   |
+	 *
+	 * Example of configuration:
+	 * conf->vf_ul_queues_number[0] = 4;  -> 4 UL queues for VF0
+	 * conf->vf_dl_queues_number[0] = 4;  -> 4 DL queues for VF0
+	 * conf->vf_ul_queues_number[1] = 2;  -> 2 UL queues for VF1
+	 * conf->vf_dl_queues_number[1] = 2;  -> 2 DL queues for VF1
+	 *
+	 * UL:
+	 * | Q_ID | VF_ID |
+	 * |   0  |   0   |
+	 * |   1  |   0   |
+	 * |   2  |   0   |
+	 * |   3  |   0   |
+	 * |   4  |   1   |
+	 * |   5  |   1   |
+	 *
+	 * DL:
+	 * | Q_ID | VF_ID |
+	 * |  32  |   0   |
+	 * |  33  |   0   |
+	 * |  34  |   0   |
+	 * |  35  |   0   |
+	 * |  36  |   1   |
+	 * |  37  |   1   |
+	 */
+	if (conf->pf_mode_en) {
+		payload_32 = 0x1;
+		for (q_id = 0; q_id < FPGA_TOTAL_NUM_QUEUES; ++q_id) {
+			address = (q_id << 2) + FPGA_5GNR_FEC_QUEUE_MAP;
+			fpga_reg_write_32(d->mmio_base, address, payload_32);
+		}
+	} else {
+		/* Calculate total number of UL and DL queues to configure */
+		total_ul_q_id = total_dl_q_id = 0;
+		for (vf_id = 0; vf_id < FPGA_5GNR_FEC_NUM_VFS; ++vf_id) {
+			total_ul_q_id += conf->vf_ul_queues_number[vf_id];
+			total_dl_q_id += conf->vf_dl_queues_number[vf_id];
+		}
+		total_q_id = total_dl_q_id + total_ul_q_id;
+		/*
+		 * Check if total number of queues to configure does not exceed
+		 * FPGA capabilities (64 queues - 32 UL and 32 DL queues)
+		 */
+		if ((total_ul_q_id > FPGA_NUM_UL_QUEUES) ||
+			(total_dl_q_id > FPGA_NUM_DL_QUEUES) ||
+			(total_q_id > FPGA_TOTAL_NUM_QUEUES)) {
+			rte_bbdev_log(ERR,
+					"FPGA Configuration failed. Too many queues to configure: UL_Q %u, DL_Q %u, FPGA_Q %u",
+					total_ul_q_id, total_dl_q_id,
+					FPGA_TOTAL_NUM_QUEUES);
+			return -EINVAL;
+		}
+		total_ul_q_id = 0;
+		for (vf_id = 0; vf_id < FPGA_5GNR_FEC_NUM_VFS; ++vf_id) {
+			for (q_id = 0; q_id < conf->vf_ul_queues_number[vf_id];
+					++q_id, ++total_ul_q_id) {
+				address = (total_ul_q_id << 2) +
+						FPGA_5GNR_FEC_QUEUE_MAP;
+				payload_32 = ((0x80 + vf_id) << 16) | 0x1;
+				fpga_reg_write_32(d->mmio_base, address,
+						payload_32);
+			}
+		}
+		total_dl_q_id = 0;
+		for (vf_id = 0; vf_id < FPGA_5GNR_FEC_NUM_VFS; ++vf_id) {
+			for (q_id = 0; q_id < conf->vf_dl_queues_number[vf_id];
+					++q_id, ++total_dl_q_id) {
+				address = ((total_dl_q_id + FPGA_NUM_UL_QUEUES)
+						<< 2) + FPGA_5GNR_FEC_QUEUE_MAP;
+				payload_32 = ((0x80 + vf_id) << 16) | 0x1;
+				fpga_reg_write_32(d->mmio_base, address,
+						payload_32);
+			}
+		}
+	}
+
+	/* Setting Load Balance Factor */
+	payload_16 = (conf->dl_load_balance << 8) | (conf->ul_load_balance);
+	address = FPGA_5GNR_FEC_LOAD_BALANCE_FACTOR;
+	fpga_reg_write_16(d->mmio_base, address, payload_16);
+
+	/* Setting length of ring descriptor entry */
+	payload_16 = FPGA_RING_DESC_ENTRY_LENGTH;
+	address = FPGA_5GNR_FEC_RING_DESC_LEN;
+	fpga_reg_write_16(d->mmio_base, address, payload_16);
+
+	/* Setting FLR timeout value */
+	payload_16 = conf->flr_time_out;
+	address = FPGA_5GNR_FEC_FLR_TIME_OUT;
+	fpga_reg_write_16(d->mmio_base, address, payload_16);
+
+	/* Queue PF/VF mapping table is ready */
+	payload_8 = 0x1;
+	address = FPGA_5GNR_FEC_QUEUE_PF_VF_MAP_DONE;
+	fpga_reg_write_8(d->mmio_base, address, payload_8);
+
+	rte_bbdev_log_debug("PF FPGA 5GNR FEC configuration complete for %s",
+			dev_name);
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	print_static_reg_debug_info(d->mmio_base);
+#endif
+	return 0;
+}
+
 /* FPGA 5GNR FEC PCI PF address map */
 static struct rte_pci_id pci_id_fpga_5gnr_fec_pf_map[] = {
 	{
diff --git a/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map b/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map
index f9f17e4..b0fb971 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map
+++ b/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map
@@ -1,3 +1,10 @@
 DPDK_20.0 {
 	local: *;
 };
+
+EXPERIMENTAL {
+	global:
+
+	fpga_5gnr_fec_configure;
+
+};
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [dpdk-dev] [PATCH v1 11/13] baseband/fpga_5gnr_fec: add harq loopback capability
  2020-03-29 20:18 [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
                   ` (9 preceding siblings ...)
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 10/13] baseband/fpga_5gnr_fec: add configure function Nicolas Chautru
@ 2020-03-29 20:18 ` Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 12/13] baseband/fpga_5gnr_fec: add interrupt support Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 13/13] doc: add feature matrix table for bbdev devices Nicolas Chautru
  12 siblings, 0 replies; 14+ messages in thread
From: Nicolas Chautru @ 2020-03-29 20:18 UTC (permalink / raw)
  To: dev; +Cc: Nicolas Chautru

Adding optional capability to support loopback preloading
and check of the extern HARQ memory.
This function is required to run the HARQ bit exact test successfully.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 171 +++++++++++++++++++++
 1 file changed, 171 insertions(+)

diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
index 2559da5..b8cad1a 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
@@ -417,6 +417,7 @@
 				RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE |
 				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE |
 				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE |
+				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK |
 				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_FILLERS,
 			.llr_size = 6,
 			.llr_decimals = 2,
@@ -1148,6 +1149,140 @@
 #endif
 
 static inline int
+fpga_harq_write_loopback(struct fpga_5gnr_fec_device *fpga_dev,
+		struct rte_mbuf *harq_input, uint16_t harq_in_length,
+		uint32_t harq_in_offset, uint32_t harq_out_offset)
+{
+	uint32_t out_offset = harq_out_offset;
+	uint32_t in_offset = harq_in_offset;
+	uint32_t left_length = harq_in_length;
+	uint32_t reg_32, increment = 0;
+	uint64_t *input = NULL;
+	uint32_t last_transaction = left_length
+			% FPGA_5GNR_FEC_DDR_WR_DATA_LEN_IN_BYTES;
+	uint64_t last_word;
+
+	if (last_transaction > 0)
+		left_length -= last_transaction;
+
+	/*
+	 * Get HARQ buffer size for each VF/PF: When 0x00, there is no
+	 * available DDR space for the corresponding VF/PF.
+	 */
+	reg_32 = fpga_reg_read_32(fpga_dev->mmio_base,
+			FPGA_5GNR_FEC_HARQ_BUF_SIZE_REGS);
+	if (reg_32 < harq_in_length) {
+		left_length = reg_32;
+		rte_bbdev_log(ERR, "HARQ in length > HARQ buffer size\n");
+	}
+
+	input = (uint64_t *)rte_pktmbuf_mtod_offset(harq_input,
+			uint8_t *, in_offset);
+
+	while (left_length > 0) {
+		if (fpga_reg_read_8(fpga_dev->mmio_base,
+				FPGA_5GNR_FEC_DDR4_ADDR_RDY_REGS) ==  1) {
+			fpga_reg_write_32(fpga_dev->mmio_base,
+					FPGA_5GNR_FEC_DDR4_WR_ADDR_REGS,
+					out_offset);
+			fpga_reg_write_64(fpga_dev->mmio_base,
+					FPGA_5GNR_FEC_DDR4_WR_DATA_REGS,
+					input[increment]);
+			left_length -= FPGA_5GNR_FEC_DDR_WR_DATA_LEN_IN_BYTES;
+			out_offset += FPGA_5GNR_FEC_DDR_WR_DATA_LEN_IN_BYTES;
+			increment++;
+			fpga_reg_write_8(fpga_dev->mmio_base,
+					FPGA_5GNR_FEC_DDR4_WR_DONE_REGS, 1);
+		}
+	}
+	while (last_transaction > 0) {
+		if (fpga_reg_read_8(fpga_dev->mmio_base,
+				FPGA_5GNR_FEC_DDR4_ADDR_RDY_REGS) ==  1) {
+			fpga_reg_write_32(fpga_dev->mmio_base,
+					FPGA_5GNR_FEC_DDR4_WR_ADDR_REGS,
+					out_offset);
+			last_word = input[increment];
+			last_word &= (uint64_t)(1 << (last_transaction * 4))
+					- 1;
+			fpga_reg_write_64(fpga_dev->mmio_base,
+					FPGA_5GNR_FEC_DDR4_WR_DATA_REGS,
+					last_word);
+			fpga_reg_write_8(fpga_dev->mmio_base,
+					FPGA_5GNR_FEC_DDR4_WR_DONE_REGS, 1);
+			last_transaction = 0;
+		}
+	}
+	return 1;
+}
+
+static inline int
+fpga_harq_read_loopback(struct fpga_5gnr_fec_device *fpga_dev,
+		struct rte_mbuf *harq_output, uint16_t harq_in_length,
+		uint32_t harq_in_offset, uint32_t harq_out_offset)
+{
+	uint32_t left_length, in_offset = harq_in_offset;
+	uint64_t reg;
+	uint32_t increment = 0;
+	uint64_t *input = NULL;
+	uint32_t last_transaction = harq_in_length
+			% FPGA_5GNR_FEC_DDR_WR_DATA_LEN_IN_BYTES;
+
+	if (last_transaction > 0)
+		harq_in_length += (8 - last_transaction);
+
+	reg = fpga_reg_read_32(fpga_dev->mmio_base,
+			FPGA_5GNR_FEC_HARQ_BUF_SIZE_REGS);
+	if (reg < harq_in_length) {
+		harq_in_length = reg;
+		rte_bbdev_log(ERR, "HARQ in length > HARQ buffer size\n");
+	}
+
+	if (!mbuf_append(harq_output, harq_output, harq_in_length)) {
+		rte_bbdev_log(ERR, "HARQ output buffer warning %d %d\n",
+				harq_output->buf_len -
+				rte_pktmbuf_headroom(harq_output),
+				harq_in_length);
+		harq_in_length = harq_output->buf_len -
+				rte_pktmbuf_headroom(harq_output);
+		if (!mbuf_append(harq_output, harq_output, harq_in_length)) {
+			rte_bbdev_log(ERR, "HARQ output buffer issue %d %d\n",
+					harq_output->buf_len, harq_in_length);
+			return -1;
+		}
+	}
+	left_length = harq_in_length;
+
+	input = (uint64_t *)rte_pktmbuf_mtod_offset(harq_output,
+			uint8_t *, harq_out_offset);
+
+	while (left_length > 0) {
+		fpga_reg_write_32(fpga_dev->mmio_base,
+			FPGA_5GNR_FEC_DDR4_RD_ADDR_REGS, in_offset);
+		fpga_reg_write_8(fpga_dev->mmio_base,
+				FPGA_5GNR_FEC_DDR4_RD_DONE_REGS, 1);
+		reg = fpga_reg_read_8(fpga_dev->mmio_base,
+			FPGA_5GNR_FEC_DDR4_RD_RDY_REGS);
+		while (reg != 1) {
+			reg = fpga_reg_read_8(fpga_dev->mmio_base,
+				FPGA_5GNR_FEC_DDR4_RD_RDY_REGS);
+			if (reg == FPGA_DDR_OVERFLOW) {
+				rte_bbdev_log(ERR,
+						"Read address is overflow!\n");
+				return -1;
+			}
+		}
+		input[increment] = fpga_reg_read_64(fpga_dev->mmio_base,
+			FPGA_5GNR_FEC_DDR4_RD_DATA_REGS);
+		left_length -= FPGA_5GNR_FEC_DDR_RD_DATA_LEN_IN_BYTES;
+		in_offset += FPGA_5GNR_FEC_DDR_WR_DATA_LEN_IN_BYTES;
+		increment++;
+		fpga_reg_write_8(fpga_dev->mmio_base,
+				FPGA_5GNR_FEC_DDR4_RD_DONE_REGS, 0);
+	}
+	return 1;
+}
+
+static inline int
 enqueue_ldpc_enc_one_op_cb(struct fpga_queue *q, struct rte_bbdev_enc_op *op,
 		uint16_t desc_offset)
 {
@@ -1275,6 +1410,42 @@
 	ring_offset = ((q->tail + desc_offset) & q->sw_ring_wrap_mask);
 	desc = q->ring_addr + ring_offset;
 
+	if (check_bit(dec->op_flags,
+			RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK)) {
+		struct rte_mbuf *harq_in = dec->harq_combined_input.data;
+		struct rte_mbuf *harq_out = dec->harq_combined_output.data;
+		harq_in_length = dec->harq_combined_input.length;
+		uint32_t harq_in_offset = dec->harq_combined_input.offset;
+		uint32_t harq_out_offset = dec->harq_combined_output.offset;
+
+		if (check_bit(dec->op_flags,
+				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE
+				)) {
+			ret = fpga_harq_write_loopback(q->d, harq_in,
+					harq_in_length, harq_in_offset,
+					harq_out_offset);
+		} else if (check_bit(dec->op_flags,
+				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE
+				)) {
+			ret = fpga_harq_read_loopback(q->d, harq_out,
+				harq_in_length, harq_in_offset,
+				harq_out_offset);
+			dec->harq_combined_output.length = harq_in_length;
+		} else {
+			rte_bbdev_log(ERR, "OP flag Err!");
+			ret = -1;
+		}
+		/* Set descriptor for dequeue */
+		desc->dec_req.done = 1;
+		desc->dec_req.error = 0;
+		desc->dec_req.op_addr = op;
+		desc->dec_req.cbs_in_op = 1;
+		/* Mark this dummy descriptor to be dropped by HW */
+		desc->dec_req.desc_idx = (ring_offset + 1)
+				& q->sw_ring_wrap_mask;
+		return ret; /* Error or number of CB */
+	}
+
 	if (m_in == NULL || m_out == NULL) {
 		rte_bbdev_log(ERR, "Invalid mbuf pointer");
 		op->status = 1 << RTE_BBDEV_DATA_ERROR;
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [dpdk-dev] [PATCH v1 12/13] baseband/fpga_5gnr_fec: add interrupt support
  2020-03-29 20:18 [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
                   ` (10 preceding siblings ...)
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 11/13] baseband/fpga_5gnr_fec: add harq loopback capability Nicolas Chautru
@ 2020-03-29 20:18 ` Nicolas Chautru
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 13/13] doc: add feature matrix table for bbdev devices Nicolas Chautru
  12 siblings, 0 replies; 14+ messages in thread
From: Nicolas Chautru @ 2020-03-29 20:18 UTC (permalink / raw)
  To: dev; +Cc: Nicolas Chautru

Adding support for interrupt capability in the PMD
and the related operations.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 156 +++++++++++++++++++++
 1 file changed, 156 insertions(+)

diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
index b8cad1a..45a3126 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
@@ -110,6 +110,23 @@
 	return rte_le_to_cpu_32(ret);
 }
 
+/* Read a register of FPGA 5GNR FEC device */
+static uint8_t
+fpga_reg_read_8(void *mmio_base, uint32_t offset)
+{
+	void *reg_addr = RTE_PTR_ADD(mmio_base, offset);
+	return *((volatile uint8_t *)(reg_addr));
+}
+
+/* Read a register of FPGA 5GNR FEC device */
+static uint64_t
+fpga_reg_read_64(void *mmio_base, uint32_t offset)
+{
+	void *reg_addr = RTE_PTR_ADD(mmio_base, offset);
+	uint64_t ret = *((volatile uint64_t *)(reg_addr));
+	return rte_le_to_cpu_64(ret);
+}
+
 #ifdef RTE_LIBRTE_BBDEV_DEBUG
 
 /* Read a register of FPGA 5GNR FEC device */
@@ -418,6 +435,7 @@
 				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE |
 				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE |
 				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK |
+				RTE_BBDEV_LDPC_DEC_INTERRUPTS |
 				RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_FILLERS,
 			.llr_size = 6,
 			.llr_decimals = 2,
@@ -729,14 +747,152 @@
 	return 0;
 }
 
+static inline uint16_t
+get_queue_id(struct rte_bbdev_data *data, uint8_t q_idx)
+{
+	uint16_t queue_id;
+
+	for (queue_id = 0; queue_id < data->num_queues; ++queue_id) {
+		struct fpga_queue *q = data->queues[queue_id].queue_private;
+		if (q != NULL && q->q_idx == q_idx)
+			return queue_id;
+	}
+
+	return -1;
+}
+
+/* Interrupt handler triggered by FPGA dev for handling specific interrupt */
+static void
+fpga_dev_interrupt_handler(void *cb_arg)
+{
+	struct rte_bbdev *dev = cb_arg;
+	struct fpga_5gnr_fec_device *fpga_dev = dev->data->dev_private;
+	struct fpga_queue *q;
+	uint64_t ring_head;
+	uint64_t q_idx;
+	uint16_t queue_id;
+	uint8_t i;
+
+	/* Scan queue assigned to this device */
+	for (i = 0; i < FPGA_TOTAL_NUM_QUEUES; ++i) {
+		q_idx = 1ULL << i;
+		if (fpga_dev->q_bound_bit_map & q_idx) {
+			queue_id = get_queue_id(dev->data, i);
+			if (queue_id == (uint16_t) -1)
+				continue;
+
+			/* Check if completion head was changed */
+			q = dev->data->queues[queue_id].queue_private;
+			ring_head = *q->ring_head_addr;
+			if (q->shadow_completion_head != ring_head &&
+				q->irq_enable == 1) {
+				q->shadow_completion_head = ring_head;
+				rte_bbdev_pmd_callback_process(
+						dev,
+						RTE_BBDEV_EVENT_DEQUEUE,
+						&queue_id);
+			}
+		}
+	}
+}
+
+static int
+fpga_queue_intr_enable(struct rte_bbdev *dev, uint16_t queue_id)
+{
+	struct fpga_queue *q = dev->data->queues[queue_id].queue_private;
+
+	if (!rte_intr_cap_multiple(dev->intr_handle))
+		return -ENOTSUP;
+
+	q->irq_enable = 1;
+
+	return 0;
+}
+
+static int
+fpga_queue_intr_disable(struct rte_bbdev *dev, uint16_t queue_id)
+{
+	struct fpga_queue *q = dev->data->queues[queue_id].queue_private;
+	q->irq_enable = 0;
+
+	return 0;
+}
+
+static int
+fpga_intr_enable(struct rte_bbdev *dev)
+{
+	int ret;
+	uint8_t i;
+
+	if (!rte_intr_cap_multiple(dev->intr_handle)) {
+		rte_bbdev_log(ERR, "Multiple intr vector is not supported by FPGA (%s)",
+				dev->data->name);
+		return -ENOTSUP;
+	}
+
+	/* Create event file descriptors for each of 64 queue. Event fds will be
+	 * mapped to FPGA IRQs in rte_intr_enable(). This is a 1:1 mapping where
+	 * the IRQ number is a direct translation to the queue number.
+	 *
+	 * 63 (FPGA_NUM_INTR_VEC) event fds are created as rte_intr_enable()
+	 * mapped the first IRQ to already created interrupt event file
+	 * descriptor (intr_handle->fd).
+	 */
+	if (rte_intr_efd_enable(dev->intr_handle, FPGA_NUM_INTR_VEC)) {
+		rte_bbdev_log(ERR, "Failed to create fds for %u queues",
+				dev->data->num_queues);
+		return -1;
+	}
+
+	/* TODO Each event file descriptor is overwritten by interrupt event
+	 * file descriptor. That descriptor is added to epoll observed list.
+	 * It ensures that callback function assigned to that descriptor will
+	 * invoked when any FPGA queue issues interrupt.
+	 */
+	for (i = 0; i < FPGA_NUM_INTR_VEC; ++i)
+		dev->intr_handle->efds[i] = dev->intr_handle->fd;
+
+	if (!dev->intr_handle->intr_vec) {
+		dev->intr_handle->intr_vec = rte_zmalloc("intr_vec",
+				dev->data->num_queues * sizeof(int), 0);
+		if (!dev->intr_handle->intr_vec) {
+			rte_bbdev_log(ERR, "Failed to allocate %u vectors",
+					dev->data->num_queues);
+			return -ENOMEM;
+		}
+	}
+
+	ret = rte_intr_enable(dev->intr_handle);
+	if (ret < 0) {
+		rte_bbdev_log(ERR,
+				"Couldn't enable interrupts for device: %s",
+				dev->data->name);
+		return ret;
+	}
+
+	ret = rte_intr_callback_register(dev->intr_handle,
+			fpga_dev_interrupt_handler, dev);
+	if (ret < 0) {
+		rte_bbdev_log(ERR,
+				"Couldn't register interrupt callback for device: %s",
+				dev->data->name);
+		return ret;
+	}
+
+	return 0;
+}
+
 static const struct rte_bbdev_ops fpga_ops = {
 	.setup_queues = fpga_setup_queues,
+	.intr_enable = fpga_intr_enable,
 	.close = fpga_dev_close,
 	.info_get = fpga_dev_info_get,
 	.queue_setup = fpga_queue_setup,
 	.queue_stop = fpga_queue_stop,
 	.queue_start = fpga_queue_start,
 	.queue_release = fpga_queue_release,
+	.queue_intr_enable = fpga_queue_intr_enable,
+	.queue_intr_disable = fpga_queue_intr_disable
 };
 
 static inline void
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [dpdk-dev] [PATCH v1 13/13] doc: add feature matrix table for bbdev devices
  2020-03-29 20:18 [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
                   ` (11 preceding siblings ...)
  2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 12/13] baseband/fpga_5gnr_fec: add interrupt support Nicolas Chautru
@ 2020-03-29 20:18 ` Nicolas Chautru
  12 siblings, 0 replies; 14+ messages in thread
From: Nicolas Chautru @ 2020-03-29 20:18 UTC (permalink / raw)
  To: dev; +Cc: Nicolas Chautru

Adding missing overview page in documentation with
comparison of feature set by each available PMD implementation.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 .gitignore                                   |  1 +
 doc/guides/bbdevs/features/default.ini       | 16 ++++++++++++++++
 doc/guides/bbdevs/features/fpga_5gnr_fec.ini | 11 +++++++++++
 doc/guides/bbdevs/features/fpga_lte_fec.ini  | 10 ++++++++++
 doc/guides/bbdevs/features/mbc.ini           | 14 ++++++++++++++
 doc/guides/bbdevs/features/null.ini          |  7 +++++++
 doc/guides/bbdevs/features/turbo_sw.ini      | 11 +++++++++++
 doc/guides/bbdevs/index.rst                  |  1 +
 doc/guides/bbdevs/overview.rst               | 15 +++++++++++++++
 doc/guides/conf.py                           |  5 +++++
 10 files changed, 91 insertions(+)
 create mode 100644 doc/guides/bbdevs/features/default.ini
 create mode 100644 doc/guides/bbdevs/features/fpga_5gnr_fec.ini
 create mode 100644 doc/guides/bbdevs/features/fpga_lte_fec.ini
 create mode 100644 doc/guides/bbdevs/features/mbc.ini
 create mode 100644 doc/guides/bbdevs/features/null.ini
 create mode 100644 doc/guides/bbdevs/features/turbo_sw.ini
 create mode 100644 doc/guides/bbdevs/overview.rst

diff --git a/.gitignore b/.gitignore
index 2acb459..f2f8892 100644
--- a/.gitignore
+++ b/.gitignore
@@ -10,6 +10,7 @@ doc/guides/cryptodevs/overview_aead_table.txt
 doc/guides/cryptodevs/overview_asym_table.txt
 doc/guides/compressdevs/overview_feature_table.txt
 doc/guides/vdpadevs/overview_feature_table.txt
+doc/guides/bbdevs/overview_feature_table.txt
 
 # ignore generated ctags/cscope files
 cscope.out.po
diff --git a/doc/guides/bbdevs/features/default.ini b/doc/guides/bbdevs/features/default.ini
new file mode 100644
index 0000000..5fe267a
--- /dev/null
+++ b/doc/guides/bbdevs/features/default.ini
@@ -0,0 +1,16 @@
+;
+; Features of a default bbdev driver.
+;
+; This file defines the features that are valid for inclusion in
+; the other driver files and also the order that they appear in
+; the features table in the documentation.
+;
+[Features]
+Turbo Decoder (4G)     =
+Turbo Encoder (4G)     =
+LDPC Decoder (5G)      =
+LDPC Encoder (5G)      =
+LLR/HARQ Compression   =
+External DDR Access    =
+HW Accelerated         =
+BBDEV API              =
diff --git a/doc/guides/bbdevs/features/fpga_5gnr_fec.ini b/doc/guides/bbdevs/features/fpga_5gnr_fec.ini
new file mode 100644
index 0000000..7a0b8d4
--- /dev/null
+++ b/doc/guides/bbdevs/features/fpga_5gnr_fec.ini
@@ -0,0 +1,11 @@
+;
+; Supported features of the 'fpga_5ngr_fec' bbdev driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+LDPC Decoder (5G)      = Y
+LDPC Encoder (5G)      = Y
+External DDR Access    = Y
+HW Accelerated         = Y
+BBDEV API              = Y
diff --git a/doc/guides/bbdevs/features/fpga_lte_fec.ini b/doc/guides/bbdevs/features/fpga_lte_fec.ini
new file mode 100644
index 0000000..f1cfb92
--- /dev/null
+++ b/doc/guides/bbdevs/features/fpga_lte_fec.ini
@@ -0,0 +1,10 @@
+;
+; Supported features of the 'fpga_lte_fec' bbdev driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Turbo Decoder (4G)     = Y
+Turbo Encoder (4G)     = Y
+HW Accelerated         = Y
+BBDEV API              = Y
diff --git a/doc/guides/bbdevs/features/mbc.ini b/doc/guides/bbdevs/features/mbc.ini
new file mode 100644
index 0000000..78a7b95
--- /dev/null
+++ b/doc/guides/bbdevs/features/mbc.ini
@@ -0,0 +1,14 @@
+;
+; Supported features of the 'mbc' bbdev driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Turbo Decoder (4G)     = Y
+Turbo Encoder (4G)     = Y
+LDPC Decoder (5G)      = Y
+LDPC Encoder (5G)      = Y
+LLR/HARQ Compression   = Y
+External DDR Access    = Y
+HW Accelerated         = Y
+BBDEV API              = Y
diff --git a/doc/guides/bbdevs/features/null.ini b/doc/guides/bbdevs/features/null.ini
new file mode 100644
index 0000000..d9bbda9
--- /dev/null
+++ b/doc/guides/bbdevs/features/null.ini
@@ -0,0 +1,7 @@
+;
+; Supported features of the 'null' bbdev driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+BBDEV API              = Y
diff --git a/doc/guides/bbdevs/features/turbo_sw.ini b/doc/guides/bbdevs/features/turbo_sw.ini
new file mode 100644
index 0000000..2c7075e
--- /dev/null
+++ b/doc/guides/bbdevs/features/turbo_sw.ini
@@ -0,0 +1,11 @@
+;
+; Supported features of the 'turbo_sw' bbdev driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Turbo Decoder (4G)     = Y
+Turbo Encoder (4G)     = Y
+LDPC Decoder (5G)      = Y
+LDPC Encoder (5G)      = Y
+BBDEV API              = Y
diff --git a/doc/guides/bbdevs/index.rst b/doc/guides/bbdevs/index.rst
index 1a79343..a8092dd 100644
--- a/doc/guides/bbdevs/index.rst
+++ b/doc/guides/bbdevs/index.rst
@@ -8,6 +8,7 @@ Baseband Device Drivers
     :maxdepth: 2
     :numbered:
 
+    overview
     null
     turbo_sw
     fpga_lte_fec
diff --git a/doc/guides/bbdevs/overview.rst b/doc/guides/bbdevs/overview.rst
new file mode 100644
index 0000000..ace4e67
--- /dev/null
+++ b/doc/guides/bbdevs/overview.rst
@@ -0,0 +1,15 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2020 Intel Corporation.
+
+Baseband Device Supported Functionality Matrices
+==============================================
+
+Supported Feature Flags
+-----------------------
+
+.. _table_bbdev_pmd_features:
+
+.. include:: overview_feature_table.txt
+
+
+
diff --git a/doc/guides/conf.py b/doc/guides/conf.py
index c368fa5..d52b584 100644
--- a/doc/guides/conf.py
+++ b/doc/guides/conf.py
@@ -406,6 +406,11 @@ def setup(app):
                             'Features',
                             'Features availability in vDPA drivers',
                             'Feature')
+    table_file = dirname(__file__) + '/bbdevs/overview_feature_table.txt'
+    generate_overview_table(table_file, 1,
+                            'Features',
+                            'Features availability in bbdev drivers',
+                            'Feature')
 
     if LooseVersion(sphinx_version) < LooseVersion('1.3.1'):
         print('Upgrade sphinx to version >= 1.3.1 for '
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2020-03-29 20:21 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-29 20:18 [dpdk-dev] [PATCH v1 00/13] drivers/baseband: PMD for FPGA 5GNR FEC Nicolas Chautru
2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 01/13] bbdev: add capability flag for filler bits inclusion in HARQ Nicolas Chautru
2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 02/13] bbdev: expose device HARQ buffer size at device level Nicolas Chautru
2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 03/13] drivers/baseband: add PMD for FPGA 5GNR FEC Nicolas Chautru
2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 04/13] baseband/fpga_5gnr_fec: add register definition file Nicolas Chautru
2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 05/13] baseband/fpga_5gnr_fec: add device info_get function Nicolas Chautru
2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 06/13] baseband/fpga_5gnr_fec: add queue configuration Nicolas Chautru
2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 07/13] baseband/fpga_5gnr_fec: add LDPC processing functions Nicolas Chautru
2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 08/13] baseband/fpga_5gnr_fec: add HW error capture Nicolas Chautru
2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 09/13] baseband/fpga_5gnr_fec: add debug functionality Nicolas Chautru
2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 10/13] baseband/fpga_5gnr_fec: add configure function Nicolas Chautru
2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 11/13] baseband/fpga_5gnr_fec: add harq loopback capability Nicolas Chautru
2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 12/13] baseband/fpga_5gnr_fec: add interrupt support Nicolas Chautru
2020-03-29 20:18 ` [dpdk-dev] [PATCH v1 13/13] doc: add feature matrix table for bbdev devices Nicolas Chautru

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).