[dpdk-dev] [PATCH v1 08/13] baseband/fpga_5gnr_fec: add HW error capture

[Nicolas Chautru <nicolas.chautru@intel.com>]

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 56 ++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
index e330a6d..64d32e4 100644
--- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
+++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
@@ -604,6 +604,54 @@
 	return bitmap & bitmask;
 }
 
+/* Print an error if a descriptor error has occurred.
+ *  Return 0 on success, 1 on failure
+ */
+static inline int
+check_desc_error(uint32_t error_code) {
+	switch (error_code) {
+	case DESC_ERR_NO_ERR:
+		return 0;
+	case DESC_ERR_K_P_OUT_OF_RANGE:
+		rte_bbdev_log(ERR, "Encode block size K' is out of range");
+		break;
+	case DESC_ERR_Z_C_NOT_LEGAL:
+		rte_bbdev_log(ERR, "Zc is illegal");
+		break;
+	case DESC_ERR_DESC_OFFSET_ERR:
+		rte_bbdev_log(ERR,
+				"Queue offset does not meet the expectation in the FPGA"
+				);
+		break;
+	case DESC_ERR_DESC_READ_FAIL:
+		rte_bbdev_log(ERR, "Unsuccessful completion for descriptor read");
+		break;
+	case DESC_ERR_DESC_READ_TIMEOUT:
+		rte_bbdev_log(ERR, "Descriptor read time-out");
+		break;
+	case DESC_ERR_DESC_READ_TLP_POISONED:
+		rte_bbdev_log(ERR, "Descriptor read TLP poisoned");
+		break;
+	case DESC_ERR_CB_READ_FAIL:
+		rte_bbdev_log(ERR, "Unsuccessful completion for code block");
+		break;
+	case DESC_ERR_CB_READ_TIMEOUT:
+		rte_bbdev_log(ERR, "Code block read time-out");
+		break;
+	case DESC_ERR_CB_READ_TLP_POISONED:
+		rte_bbdev_log(ERR, "Code block read TLP poisoned");
+		break;
+	case DESC_ERR_HBSTORE_ERR:
+		rte_bbdev_log(ERR, "Hbstroe exceeds HARQ buffer size.");
+		break;
+	default:
+		rte_bbdev_log(ERR, "Descriptor error unknown error code %u",
+				error_code);
+		break;
+	}
+	return 1;
+}
+
 /* Compute value of k0.
  * Based on 3GPP 38.212 Table 5.4.2.1-2
  * Starting position of different redundancy versions, k0
@@ -1085,6 +1133,11 @@
 
 	rte_bbdev_log_debug("DMA response desc %p", desc);
 
+	*op = desc->enc_req.op_addr;
+	/* Check the descriptor error field, return 1 on error */
+	desc_error = check_desc_error(desc->enc_req.error);
+	(*op)->status = desc_error << RTE_BBDEV_DATA_ERROR;
+
 	return 1;
 }
 
@@ -1121,6 +1174,9 @@
 		(*op)->status = 1 << RTE_BBDEV_CRC_ERROR;
 	/* et_pass = 0 when decoder fails */
 	(*op)->status |= !(desc->dec_req.et_pass) << RTE_BBDEV_SYNDROME_ERROR;
+	/* Check the descriptor error field, return 1 on error */
+	desc_error = check_desc_error(desc->dec_req.error);
+	(*op)->status |= desc_error << RTE_BBDEV_DATA_ERROR;
 	return 1;
 }
 
-- 
1.8.3.1