From: wangyunjian <wangyunjian@huawei.com>
To: <dev@dpdk.org>
Cc: <g.singh@nxp.com>, <hemant.agrawal@nxp.com>,
<jerry.lilijun@huawei.com>, <xudingke@huawei.com>,
Yunjian Wang <wangyunjian@huawei.com>, <stable@dpdk.org>
Subject: [dpdk-dev] [PATCH v2] crypto/caam_jr: fix wrong check of fd
Date: Mon, 11 May 2020 12:37:18 +0800 [thread overview]
Message-ID: <1589171838-18076-1-git-send-email-wangyunjian@huawei.com> (raw)
From: Yunjian Wang <wangyunjian@huawei.com>
Zero is a valid fd. It will fail to check the fd if the fd is zero.
The "job_ring->uio_fd" is an fd, so define it as "int".
Fixes: e7a45f3cc245 ("crypto/caam_jr: add UIO specific operations")
Fixes: a5e1018d5e67 ("crypto/caam_jr: add routines to configure HW")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
---
v2:
* Change "job_ring->uio_fd" type suggested by Gagandeep Singh
---
drivers/crypto/caam_jr/caam_jr.c | 6 ++++--
drivers/crypto/caam_jr/caam_jr_hw_specific.h | 2 +-
drivers/crypto/caam_jr/caam_jr_pvt.h | 5 +++--
drivers/crypto/caam_jr/caam_jr_uio.c | 21 ++++++++++++++------
4 files changed, 23 insertions(+), 11 deletions(-)
diff --git a/drivers/crypto/caam_jr/caam_jr.c b/drivers/crypto/caam_jr/caam_jr.c
index 5a29dd169..f62d46546 100644
--- a/drivers/crypto/caam_jr/caam_jr.c
+++ b/drivers/crypto/caam_jr/caam_jr.c
@@ -2074,7 +2074,7 @@ static struct rte_security_ops caam_jr_security_ops = {
static void
close_job_ring(struct sec_job_ring_t *job_ring)
{
- if (job_ring->irq_fd) {
+ if (job_ring->irq_fd != -1) {
/* Producer index is frozen. If consumer index is not equal
* with producer index, then we have descs to flush.
*/
@@ -2187,7 +2187,7 @@ caam_jr_dev_uninit(struct rte_cryptodev *dev)
*
*/
static void *
-init_job_ring(void *reg_base_addr, uint32_t irq_id)
+init_job_ring(void *reg_base_addr, int irq_id)
{
struct sec_job_ring_t *job_ring = NULL;
int i, ret = 0;
@@ -2466,6 +2466,8 @@ RTE_PMD_REGISTER_CRYPTO_DRIVER(caam_jr_crypto_drv, cryptodev_caam_jr_drv.driver,
RTE_INIT(caam_jr_init_log)
{
+ sec_init();
+
caam_jr_logtype = rte_log_register("pmd.crypto.caam");
if (caam_jr_logtype >= 0)
rte_log_set_level(caam_jr_logtype, RTE_LOG_NOTICE);
diff --git a/drivers/crypto/caam_jr/caam_jr_hw_specific.h b/drivers/crypto/caam_jr/caam_jr_hw_specific.h
index 5f58a585d..ec4539d1b 100644
--- a/drivers/crypto/caam_jr/caam_jr_hw_specific.h
+++ b/drivers/crypto/caam_jr/caam_jr_hw_specific.h
@@ -360,7 +360,7 @@ struct sec_job_ring_t {
* bitwise operations.
*/
- uint32_t irq_fd; /* The file descriptor used for polling from
+ int irq_fd; /* The file descriptor used for polling from
* user space for interrupts notifications
*/
uint32_t jr_mode; /* Model used by SEC Driver to receive
diff --git a/drivers/crypto/caam_jr/caam_jr_pvt.h b/drivers/crypto/caam_jr/caam_jr_pvt.h
index 98cd4438a..fa9e86ea6 100644
--- a/drivers/crypto/caam_jr/caam_jr_pvt.h
+++ b/drivers/crypto/caam_jr/caam_jr_pvt.h
@@ -216,16 +216,17 @@ calc_chksum(void *buffer, int len)
}
struct uio_job_ring {
uint32_t jr_id;
- uint32_t uio_fd;
+ int uio_fd;
void *register_base_addr;
int map_size;
int uio_minor_number;
};
int sec_cleanup(void);
+void sec_init(void);
int sec_configure(void);
struct uio_job_ring *config_job_ring(void);
-void free_job_ring(uint32_t uio_fd);
+void free_job_ring(int uio_fd);
/* For Dma memory allocation of specified length and alignment */
static inline void *
diff --git a/drivers/crypto/caam_jr/caam_jr_uio.c b/drivers/crypto/caam_jr/caam_jr_uio.c
index b1bb44ca4..133b32084 100644
--- a/drivers/crypto/caam_jr/caam_jr_uio.c
+++ b/drivers/crypto/caam_jr/caam_jr_uio.c
@@ -145,7 +145,7 @@ file_read_first_line(const char root[], const char subdir[],
"%s/%s/%s", root, subdir, filename);
fd = open(absolute_file_name, O_RDONLY);
- SEC_ASSERT(fd > 0, fd, "Error opening file %s",
+ SEC_ASSERT(fd >= 0, fd, "Error opening file %s",
absolute_file_name);
/* read UIO device name from first line in file */
@@ -322,7 +322,7 @@ uio_map_registers(int uio_device_fd, int uio_device_id,
}
void
-free_job_ring(uint32_t uio_fd)
+free_job_ring(int uio_fd)
{
struct uio_job_ring *job_ring = NULL;
int i;
@@ -347,7 +347,7 @@ free_job_ring(uint32_t uio_fd)
job_ring->jr_id, job_ring->uio_fd);
close(job_ring->uio_fd);
g_uio_jr_num--;
- job_ring->uio_fd = 0;
+ job_ring->uio_fd = -1;
if (job_ring->register_base_addr == NULL)
return;
@@ -370,7 +370,7 @@ uio_job_ring *config_job_ring(void)
int i;
for (i = 0; i < MAX_SEC_JOB_RINGS; i++) {
- if (g_uio_job_ring[i].uio_fd == 0) {
+ if (g_uio_job_ring[i].uio_fd == -1) {
job_ring = &g_uio_job_ring[i];
g_uio_jr_num++;
break;
@@ -389,7 +389,7 @@ uio_job_ring *config_job_ring(void)
/* Open device file */
job_ring->uio_fd = open(uio_device_file_name, O_RDWR);
- SEC_ASSERT(job_ring->uio_fd > 0, NULL,
+ SEC_ASSERT(job_ring->uio_fd >= 0, NULL,
"Failed to open UIO device file for job ring %d",
job_ring->jr_id);
@@ -488,12 +488,21 @@ sec_cleanup(void)
/* I need to close the fd after shutdown UIO commands need to be
* sent using the fd
*/
- if (job_ring->uio_fd != 0) {
+ if (job_ring->uio_fd != -1) {
CAAM_JR_INFO(
"Closed device file for job ring %d , fd = %d",
job_ring->jr_id, job_ring->uio_fd);
close(job_ring->uio_fd);
+ job_ring->uio_fd = -1;
}
}
return 0;
}
+
+void sec_init(void)
+{
+ int i;
+
+ for (i = 0; i < g_uio_jr_num; i++)
+ g_uio_job_ring[i].uio_fd = -1;
+}
--
2.19.1
next reply other threads:[~2020-05-11 4:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-11 4:37 wangyunjian [this message]
2020-05-12 3:48 ` Gagandeep Singh
2020-05-12 10:57 ` wangyunjian
2020-05-13 4:11 ` Gagandeep Singh
2020-05-13 11:13 ` wangyunjian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1589171838-18076-1-git-send-email-wangyunjian@huawei.com \
--to=wangyunjian@huawei.com \
--cc=dev@dpdk.org \
--cc=g.singh@nxp.com \
--cc=hemant.agrawal@nxp.com \
--cc=jerry.lilijun@huawei.com \
--cc=stable@dpdk.org \
--cc=xudingke@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).