[dpdk-dev] [PATCH] rte_flow: add eCPRI key fields to flow API

[Bing Zhao <bingz@mellanox.com>]

Add a new item "rte_flow_item_ecpri" in order to match eCRPI header.

eCPRI is a packet based protocol used in the fronthaul interface of
5G networks. Header format definition could be found in the
specification via the link below:
https://www.gigalight.com/downloads/standards/ecpri-specification.pdf

eCPRI message can be over Ethernet layer (.1Q supported also) or over
UDP layer. Message header formats are the same in these two variants.

Signed-off-by: Bing Zhao <bingz@mellanox.com>
---
 doc/guides/prog_guide/rte_flow.rst |   8 ++
 lib/librte_ethdev/rte_flow.c       |   1 +
 lib/librte_ethdev/rte_flow.h       |  31 ++++++
 lib/librte_net/Makefile            |   1 +
 lib/librte_net/meson.build         |   3 +-
 lib/librte_net/rte_ecpri.h         | 160 +++++++++++++++++++++++++++++
 lib/librte_net/rte_ether.h         |   1 +
 7 files changed, 204 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_net/rte_ecpri.h

diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index d5dd18ce99..669d519233 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -1362,6 +1362,14 @@ Matches a PFCP Header.
 - ``seid``: session endpoint identifier.
 - Default ``mask`` matches s_field and seid.
 
+Item: ``ECPRI``
+^^^^^^^^^^^^^
+
+Matches a eCPRI header.
+
+- ``hdr``: eCPRI header definition (``rte_ecpri.h``).
+- Default ``mask`` matches message type of common header only.
+
 Actions
 ~~~~~~~
 
diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
index 1685be5f73..f8fdd68fe9 100644
--- a/lib/librte_ethdev/rte_flow.c
+++ b/lib/librte_ethdev/rte_flow.c
@@ -95,6 +95,7 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {
 	MK_FLOW_ITEM(HIGIG2, sizeof(struct rte_flow_item_higig2_hdr)),
 	MK_FLOW_ITEM(L2TPV3OIP, sizeof(struct rte_flow_item_l2tpv3oip)),
 	MK_FLOW_ITEM(PFCP, sizeof(struct rte_flow_item_pfcp)),
+	MK_FLOW_ITEM(ECPRI, sizeof(struct rte_flow_item_ecpri)),
 };
 
 /** Generate flow_action[] entry. */
diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
index b0e4199192..2683466f7a 100644
--- a/lib/librte_ethdev/rte_flow.h
+++ b/lib/librte_ethdev/rte_flow.h
@@ -28,6 +28,7 @@
 #include <rte_byteorder.h>
 #include <rte_esp.h>
 #include <rte_higig.h>
+#include <rte_ecpri.h>
 #include <rte_mbuf.h>
 #include <rte_mbuf_dyn.h>
 
@@ -527,6 +528,13 @@ enum rte_flow_item_type {
 	 */
 	RTE_FLOW_ITEM_TYPE_PFCP,
 
+	/**
+	 * Matches eCPRI Header.
+	 * See struct rte_flow_item_ecpri.
+	 *
+	 */
+	RTE_FLOW_ITEM_TYPE_ECPRI,
+
 };
 
 /**
@@ -1546,6 +1554,29 @@ static const struct rte_flow_item_pfcp rte_flow_item_pfcp_mask = {
 };
 #endif
 
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ITEM_TYPE_ECPRI
+ *
+ * Match eCPRI Header
+ */
+struct rte_flow_item_ecpri {
+	struct rte_ecpri_msg_hdr hdr;
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_ECPRI. */
+#ifndef __cplusplus
+static const struct rte_flow_item_ecpri rte_flow_item_ecpri_mask = {
+	.hdr = {
+		.common = {
+			.type = 0xFF,
+		},
+	},
+};
+#endif
+
 /**
  * Matching pattern item definition.
  *
diff --git a/lib/librte_net/Makefile b/lib/librte_net/Makefile
index aa1d6fed5a..9830e771b3 100644
--- a/lib/librte_net/Makefile
+++ b/lib/librte_net/Makefile
@@ -20,5 +20,6 @@ SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_sctp.h rte_icmp.h rte_arp.h
 SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_ether.h rte_gre.h rte_net.h
 SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_net_crc.h rte_mpls.h rte_higig.h
 SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_gtp.h rte_vxlan.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_ecpri.h
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_net/meson.build b/lib/librte_net/meson.build
index f799349b3e..24ed8253b4 100644
--- a/lib/librte_net/meson.build
+++ b/lib/librte_net/meson.build
@@ -15,7 +15,8 @@ headers = files('rte_ip.h',
 	'rte_net.h',
 	'rte_net_crc.h',
 	'rte_mpls.h',
-	'rte_higig.h')
+	'rte_higig.h',
+	'rte_ecpri.h')
 
 sources = files('rte_arp.c', 'rte_ether.c', 'rte_net.c', 'rte_net_crc.c')
 deps += ['mbuf']
diff --git a/lib/librte_net/rte_ecpri.h b/lib/librte_net/rte_ecpri.h
new file mode 100644
index 0000000000..c1fd000775
--- /dev/null
+++ b/lib/librte_net/rte_ecpri.h
@@ -0,0 +1,160 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2020 Mellanox Technologies, Ltd
+ */
+
+#ifndef _RTE_ECPRI_H_
+#define _RTE_ECPRI_H_
+
+#include <stdint.h>
+#include <rte_byteorder.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * eCPRI Protocol Revision 1.0, 1.1, 1.2, 2.0: 0001b
+ * Other values are reserved for future
+ */
+#define RTE_ECPRI_REV_UPTO_20		1
+
+/**
+ * eCPRI message types in specifications
+ * IWF* types will only be supported from rev.2
+ */
+#define RTE_ECPRI_MSG_TYPE_IQ_DATA	0
+#define RTE_ECPRI_MSG_TYPE_BIT_SEQ	1
+#define RTE_ECPRI_MSG_TYPE_RTC_CTRL	2
+#define RTE_ECPRI_MSG_TYPE_GEN_DATA	3
+#define RTE_ECPRI_MSG_TYPE_RM_ACC	4
+#define RTE_ECPRI_MSG_TYPE_DLY_MSR	5
+#define RTE_ECPRI_MSG_TYPE_RMT_RST	6
+#define RTE_ECPRI_MSG_TYPE_EVT_IND	7
+#define RTE_ECPRI_MSG_TYPE_IWF_UP	8
+#define RTE_ECPRI_MSG_TYPE_IWF_OPT	9
+#define RTE_ECPRI_MSG_TYPE_IWF_MAP	10
+#define RTE_ECPRI_MSG_TYPE_IWF_DCTRL	11
+
+/**
+ * eCPRI Common Header
+ */
+RTE_STD_C11
+struct rte_ecpri_common_hdr {
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+	uint32_t size:16;		/**< Payload Size */
+	uint32_t type:8;		/**< Message Type */
+	uint32_t c:1;			/**< Concatenation Indicator */
+	uint32_t res:3;			/**< Reserved */
+	uint32_t revision:4;		/**< Protocol Revision */
+#elif RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+	uint32_t revision:4;		/**< Protocol Revision */
+	uint32_t res:3;			/**< Reserved */
+	uint32_t c:1;			/**< Concatenation Indicator */
+	uint32_t type:8;		/**< Message Type */
+	uint32_t size:16;		/**< Payload Size */
+#endif
+} __rte_packed;
+
+/**
+ * eCPRI Message Header of Type #0: IQ Data
+ */
+struct rte_ecpri_msg_iq_data {
+	rte_be16_t pc_id;		/**< Physical channel ID */
+	rte_be16_t seq_id;		/**< Sequence ID */
+};
+
+/**
+ * eCPRI Message Header of Type #1: Bit Sequence
+ */
+struct rte_ecpri_msg_bit_seq {
+	rte_be16_t pc_id;		/**< Physical channel ID */
+	rte_be16_t seq_id;		/**< Sequence ID */
+};
+
+/**
+ * eCPRI Message Header of Type #2: Real-Time Control Data
+ */
+struct rte_ecpri_msg_rtc_ctrl {
+	rte_be16_t rtc_id;		/**< Real-Time Control Data ID */
+	rte_be16_t seq_id;		/**< Sequence ID */
+};
+
+/**
+ * eCPRI Message Header of Type #3: Generic Data Transfer
+ */
+struct rte_ecpri_msg_gen_data {
+	rte_be32_t pc_id;		/**< Physical channel ID */
+	rte_be32_t seq_id;		/**< Sequence ID */
+};
+
+/**
+ * eCPRI Message Header of Type #4: Remote Memory Access
+ */
+RTE_STD_C11
+struct rte_ecpri_msg_rm_access {
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+	uint32_t ele_id:16;		/**< Element ID */
+	uint32_t rr:4;			/**< Req/Resp */
+	uint32_t rw:4;			/**< Read/Write */
+	uint32_t rma_id:8;		/**< Remote Memory Access ID */
+#elif RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+	uint32_t rma_id:8;		/**< Remote Memory Access ID */
+	uint32_t rw:4;			/**< Read/Write */
+	uint32_t rr:4;			/**< Req/Resp */
+	uint32_t ele_id:16;		/**< Element ID */
+#endif
+	rte_be16_t addr_m;		/**< 48-bits address (16 MSB) */
+	rte_be32_t addr_l;		/**< 48-bits address (32 LSB) */
+	rte_be16_t length;		/**< number of bytes */
+} __rte_packed;
+
+/**
+ * eCPRI Message Header of Type #5: One-Way Delay Measurement
+ */
+struct rte_ecpri_msg_delay_measure {
+	uint8_t msr_id;			/**< Measurement ID */
+	uint8_t act_type;		/**< Action Type */
+};
+
+/**
+ * eCPRI Message Header of Type #6: Remote Reset
+ */
+struct rte_ecpri_msg_remote_reset {
+	uint8_t msr_id;			/**< Measurement ID */
+	uint8_t act_type;		/**< Action Type */
+};
+
+/**
+ * eCPRI Message Header of Type #7: Event Indication
+ */
+struct rte_ecpri_msg_event_ind {
+	uint8_t evt_id;			/**< Event ID */
+	uint8_t evt_type;		/**< Event Type */
+	uint8_t seq;			/**< Sequence Number */
+	uint8_t number;			/**< Number of Faults/Notif */
+};
+
+/**
+ * eCPRI Message Header Format: Common Header + Message Types
+ */
+RTE_STD_C11
+struct rte_ecpri_msg_hdr {
+	struct rte_ecpri_common_hdr common;
+	union {
+		struct rte_ecpri_msg_iq_data type0;
+		struct rte_ecpri_msg_bit_seq type1;
+		struct rte_ecpri_msg_rtc_ctrl type2;
+		struct rte_ecpri_msg_bit_seq type3;
+		struct rte_ecpri_msg_rm_access type4;
+		struct rte_ecpri_msg_delay_measure type5;
+		struct rte_ecpri_msg_remote_reset type6;
+		struct rte_ecpri_msg_event_ind type7;
+		uint32_t dummy[3];
+	};
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ECPRI_H_ */
diff --git a/lib/librte_net/rte_ether.h b/lib/librte_net/rte_ether.h
index 0ae4e75b6c..184a3f9b43 100644
--- a/lib/librte_net/rte_ether.h
+++ b/lib/librte_net/rte_ether.h
@@ -304,6 +304,7 @@ struct rte_vlan_hdr {
 #define RTE_ETHER_TYPE_LLDP 0x88CC /**< LLDP Protocol. */
 #define RTE_ETHER_TYPE_MPLS 0x8847 /**< MPLS ethertype. */
 #define RTE_ETHER_TYPE_MPLSM 0x8848 /**< MPLS multicast ethertype. */
+#define RTE_ETHER_TYPE_ECPRI 0xAEFE /**< eCPRI ethertype (.1Q supported). */
 
 /**
  * Extract VLAN tag information into mbuf
-- 
2.19.0.windows.1