[dpdk-dev] [PATCH 12/27] event/dlb: add the PMD's public interfaces

["McDaniel, Timothy" <timothy.mcdaniel@intel.com>]

From: "McDaniel, Timothy" <timothy.mcdaniel@intel.com>

Signed-off-by: McDaniel, Timothy <timothy.mcdaniel@intel.com>
---
 drivers/event/dlb/Makefile                      |    2 +
 drivers/event/dlb/meson.build                   |    4 +-
 drivers/event/dlb/rte_pmd_dlb.c                 |   38 +++++++++++++
 drivers/event/dlb/rte_pmd_dlb.h                 |   69 +++++++++++++++++++++++
 drivers/event/dlb/rte_pmd_dlb_event_version.map |    6 ++
 5 files changed, 118 insertions(+), 1 deletion(-)
 create mode 100644 drivers/event/dlb/rte_pmd_dlb.c
 create mode 100644 drivers/event/dlb/rte_pmd_dlb.h
 create mode 100644 drivers/event/dlb/rte_pmd_dlb_event_version.map

diff --git a/drivers/event/dlb/Makefile b/drivers/event/dlb/Makefile
index b506e75..9bcb8ef 100644
--- a/drivers/event/dlb/Makefile
+++ b/drivers/event/dlb/Makefile
@@ -20,11 +20,13 @@ LIBABIVER := 1
 EXPORT_MAP := rte_pmd_dlb_event_version.map
 
 # library source files
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_DLB_EVENTDEV) += rte_pmd_dlb.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_DLB_EVENTDEV) += dlb_iface.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_DLB_EVENTDEV) += pf/dlb_pf.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_DLB_EVENTDEV) += pf/dlb_main.c
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_DLB_EVENTDEV) += pf/base/dlb_resource.c
 
 # export include files
+SYMLINK-y-include += rte_pmd_dlb.h
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/event/dlb/meson.build b/drivers/event/dlb/meson.build
index 1471a43..06285c5 100644
--- a/drivers/event/dlb/meson.build
+++ b/drivers/event/dlb/meson.build
@@ -1,10 +1,12 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2019-2020 Intel Corporation
 
-sources = files('dlb_iface.c',
+sources = files('rte_pmd_dlb.c',
+		'dlb_iface.c',
 		'pf/dlb_pf.c',
 		'pf/dlb_main.c',
 		'pf/base/dlb_resource.c'
 )
 
 deps += ['mbuf', 'mempool', 'ring', 'pci', 'bus_pci']
+install_headers('rte_pmd_dlb.h')
diff --git a/drivers/event/dlb/rte_pmd_dlb.c b/drivers/event/dlb/rte_pmd_dlb.c
new file mode 100644
index 0000000..bc802d3
--- /dev/null
+++ b/drivers/event/dlb/rte_pmd_dlb.c
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+#include "rte_eventdev.h"
+#include "rte_eventdev_pmd.h"
+#include "rte_pmd_dlb.h"
+#include "dlb_priv.h"
+#include "dlb_inline_fns.h"
+
+int
+rte_pmd_dlb_set_token_pop_mode(uint8_t dev_id,
+			       uint8_t port_id,
+			       enum dlb_token_pop_mode mode)
+{
+	struct dlb_eventdev *dlb;
+	struct rte_eventdev *dev;
+
+	RTE_EVENTDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+	dev = &rte_eventdevs[dev_id];
+
+	dlb = dlb_pmd_priv(dev);
+
+	if (mode >= NUM_TOKEN_POP_MODES)
+		return -EINVAL;
+
+	/* The event device must be configured, but not yet started */
+	if (!dlb->configured || dlb->run_state != DLB_RUN_STATE_STOPPED)
+		return -EINVAL;
+
+	/* The token pop mode must be set before configuring the port */
+	if (port_id >= dlb->num_ports || dlb->ev_ports[port_id].setup_done)
+		return -EINVAL;
+
+	dlb->ev_ports[port_id].qm_port.token_pop_mode = mode;
+
+	return 0;
+}
diff --git a/drivers/event/dlb/rte_pmd_dlb.h b/drivers/event/dlb/rte_pmd_dlb.h
new file mode 100644
index 0000000..1b637de
--- /dev/null
+++ b/drivers/event/dlb/rte_pmd_dlb.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2019-2020 Intel Corporation
+ */
+
+/*!
+ *  @file      rte_pmd_dlb.h
+ *
+ *  @brief     DLB PMD-specific functions
+ */
+
+#ifndef _RTE_PMD_DLB_H_
+#define _RTE_PMD_DLB_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * Selects the token pop mode for an DLB port.
+ */
+enum dlb_token_pop_mode {
+	/* Pop the CQ tokens immediately after dequeueing. */
+	AUTO_POP,
+	/* Pop CQ tokens after (dequeue_depth - 1) events are released.
+	 * Supported on load-balanced ports only.
+	 */
+	DELAYED_POP,
+	/* Pop the CQ tokens during next dequeue operation. */
+	DEFERRED_POP,
+
+	/* NUM_TOKEN_POP_MODES must be last */
+	NUM_TOKEN_POP_MODES
+};
+
+/*!
+ * Configure the token pop mode for an DLB port. By default, all ports use
+ * AUTO_POP. This function must be called before calling rte_event_port_setup()
+ * for the port, but after calling rte_event_dev_configure().
+ *
+ * @note
+ *    The defer_sched vdev arg, which configures all load-balanced ports with
+ *    dequeue_depth == 1 for DEFERRED_POP mode, takes precedence over this
+ *    function.
+ *
+ * @param dev_id
+ *    The identifier of the event device.
+ * @param port_id
+ *    The identifier of the event port.
+ * @param mode
+ *    The token pop mode.
+ *
+ * @return
+ * - 0: Success
+ * - EINVAL: Invalid dev_id, port_id, or mode
+ * - EINVAL: The DLB is not configured, is already running, or the port is
+ *   already setup
+ */
+
+int
+rte_pmd_dlb_set_token_pop_mode(uint8_t dev_id,
+				uint8_t port_id,
+				enum dlb_token_pop_mode mode);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_PMD_DLB_H_ */
diff --git a/drivers/event/dlb/rte_pmd_dlb_event_version.map b/drivers/event/dlb/rte_pmd_dlb_event_version.map
new file mode 100644
index 0000000..8b1c796
--- /dev/null
+++ b/drivers/event/dlb/rte_pmd_dlb_event_version.map
@@ -0,0 +1,6 @@
+DPDK_20.08 {
+	global:
+
+	rte_pmd_dlb_set_token_pop_mode;
+	local: *;
+};
-- 
1.7.10