From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from dpdk.org (dpdk.org [92.243.14.124]) by inbox.dpdk.org (Postfix) with ESMTP id 9F765A04AF; Wed, 19 Aug 2020 02:28:26 +0200 (CEST) Received: from [92.243.14.124] (localhost [127.0.0.1]) by dpdk.org (Postfix) with ESMTP id 6A6661C112; Wed, 19 Aug 2020 02:27:37 +0200 (CEST) Received: from mga04.intel.com (mga04.intel.com [192.55.52.120]) by dpdk.org (Postfix) with ESMTP id 5C9EF5F69 for ; Wed, 19 Aug 2020 02:27:24 +0200 (CEST) IronPort-SDR: /hnSPcD839uweBFM8kGGvQgC/n6O4xQxjSgI75dgqXpu1TzdMcWCeZC6RHIAH+vDIXP201Z8fK iOAH2C7z3eRg== X-IronPort-AV: E=McAfee;i="6000,8403,9717"; a="152440061" X-IronPort-AV: E=Sophos;i="5.76,329,1592895600"; d="scan'208";a="152440061" X-Amp-Result: SKIPPED(no attachment in message) X-Amp-File-Uploaded: False Received: from fmsmga001.fm.intel.com ([10.253.24.23]) by fmsmga104.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 18 Aug 2020 17:27:21 -0700 IronPort-SDR: 3Y8uWu0KOgQPlRzs7mfJsKLNdp5zDKnOdK3wd549/qW0EL8/90jfiFp6ECGtk5JPDRn9LhMbYb cut7Itv4g0DQ== X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.76,329,1592895600"; d="scan'208";a="400658910" Received: from skx-5gnr-sc12-4.sc.intel.com ([172.25.69.210]) by fmsmga001.fm.intel.com with ESMTP; 18 Aug 2020 17:27:21 -0700 From: Nicolas Chautru To: dev@dpdk.org, akhil.goyal@nxp.com Cc: bruce.richardson@intel.com, Nicolas Chautru Date: Tue, 18 Aug 2020 17:25:25 -0700 Message-Id: <1597796731-57841-6-git-send-email-nicolas.chautru@intel.com> X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1597796731-57841-1-git-send-email-nicolas.chautru@intel.com> References: <1597796731-57841-1-git-send-email-nicolas.chautru@intel.com> Subject: [dpdk-dev] [PATCH v3 05/11] baseband/acc100: add LDPC processing functions X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" Adding LDPC decode and encode processing operations Signed-off-by: Nicolas Chautru --- drivers/baseband/acc100/rte_acc100_pmd.c | 1625 +++++++++++++++++++++++++++++- drivers/baseband/acc100/rte_acc100_pmd.h | 3 + 2 files changed, 1626 insertions(+), 2 deletions(-) diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c b/drivers/baseband/acc100/rte_acc100_pmd.c index 7a21c57..5f32813 100644 --- a/drivers/baseband/acc100/rte_acc100_pmd.c +++ b/drivers/baseband/acc100/rte_acc100_pmd.c @@ -15,6 +15,9 @@ #include #include #include +#ifdef RTE_BBDEV_OFFLOAD_COST +#include +#endif #include #include @@ -449,7 +452,6 @@ return 0; } - /** * Report a ACC100 queue index which is free * Return 0 to 16k for a valid queue_idx or -1 when no queue is available @@ -634,6 +636,46 @@ struct acc100_device *d = dev->data->dev_private; static const struct rte_bbdev_op_cap bbdev_capabilities[] = { + { + .type = RTE_BBDEV_OP_LDPC_ENC, + .cap.ldpc_enc = { + .capability_flags = + RTE_BBDEV_LDPC_RATE_MATCH | + RTE_BBDEV_LDPC_CRC_24B_ATTACH | + RTE_BBDEV_LDPC_INTERLEAVER_BYPASS, + .num_buffers_src = + RTE_BBDEV_LDPC_MAX_CODE_BLOCKS, + .num_buffers_dst = + RTE_BBDEV_LDPC_MAX_CODE_BLOCKS, + } + }, + { + .type = RTE_BBDEV_OP_LDPC_DEC, + .cap.ldpc_dec = { + .capability_flags = + RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK | + RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP | + RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE | + RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE | +#ifdef ACC100_EXT_MEM + RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE | + RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE | +#endif + RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE | + RTE_BBDEV_LDPC_DEINTERLEAVER_BYPASS | + RTE_BBDEV_LDPC_DECODE_BYPASS | + RTE_BBDEV_LDPC_DEC_SCATTER_GATHER | + RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION | + RTE_BBDEV_LDPC_LLR_COMPRESSION, + .llr_size = 8, + .llr_decimals = 1, + .num_buffers_src = + RTE_BBDEV_LDPC_MAX_CODE_BLOCKS, + .num_buffers_hard_out = + RTE_BBDEV_LDPC_MAX_CODE_BLOCKS, + .num_buffers_soft_out = 0, + } + }, RTE_BBDEV_END_OF_CAPABILITIES_LIST() }; @@ -669,9 +711,14 @@ dev_info->cpu_flag_reqs = NULL; dev_info->min_alignment = 64; dev_info->capabilities = bbdev_capabilities; +#ifdef ACC100_EXT_MEM dev_info->harq_buffer_size = d->ddr_size; +#else + dev_info->harq_buffer_size = 0; +#endif } + static const struct rte_bbdev_ops acc100_bbdev_ops = { .setup_queues = acc100_setup_queues, .close = acc100_dev_close, @@ -696,6 +743,1577 @@ {.device_id = 0}, }; +/* Read flag value 0/1 from bitmap */ +static inline bool +check_bit(uint32_t bitmap, uint32_t bitmask) +{ + return bitmap & bitmask; +} + +static inline char * +mbuf_append(struct rte_mbuf *m_head, struct rte_mbuf *m, uint16_t len) +{ + if (unlikely(len > rte_pktmbuf_tailroom(m))) + return NULL; + + char *tail = (char *)m->buf_addr + m->data_off + m->data_len; + m->data_len = (uint16_t)(m->data_len + len); + m_head->pkt_len = (m_head->pkt_len + len); + return tail; +} + +/* Compute value of k0. + * Based on 3GPP 38.212 Table 5.4.2.1-2 + * Starting position of different redundancy versions, k0 + */ +static inline uint16_t +get_k0(uint16_t n_cb, uint16_t z_c, uint8_t bg, uint8_t rv_index) +{ + if (rv_index == 0) + return 0; + uint16_t n = (bg == 1 ? N_ZC_1 : N_ZC_2) * z_c; + if (n_cb == n) { + if (rv_index == 1) + return (bg == 1 ? K0_1_1 : K0_1_2) * z_c; + else if (rv_index == 2) + return (bg == 1 ? K0_2_1 : K0_2_2) * z_c; + else + return (bg == 1 ? K0_3_1 : K0_3_2) * z_c; + } + /* LBRM case - includes a division by N */ + if (rv_index == 1) + return (((bg == 1 ? K0_1_1 : K0_1_2) * n_cb) + / n) * z_c; + else if (rv_index == 2) + return (((bg == 1 ? K0_2_1 : K0_2_2) * n_cb) + / n) * z_c; + else + return (((bg == 1 ? K0_3_1 : K0_3_2) * n_cb) + / n) * z_c; +} + +/* Fill in a frame control word for LDPC encoding. */ +static inline void +acc100_fcw_le_fill(const struct rte_bbdev_enc_op *op, + struct acc100_fcw_le *fcw, int num_cb) +{ + fcw->qm = op->ldpc_enc.q_m; + fcw->nfiller = op->ldpc_enc.n_filler; + fcw->BG = (op->ldpc_enc.basegraph - 1); + fcw->Zc = op->ldpc_enc.z_c; + fcw->ncb = op->ldpc_enc.n_cb; + fcw->k0 = get_k0(fcw->ncb, fcw->Zc, op->ldpc_enc.basegraph, + op->ldpc_enc.rv_index); + fcw->rm_e = op->ldpc_enc.cb_params.e; + fcw->crc_select = check_bit(op->ldpc_enc.op_flags, + RTE_BBDEV_LDPC_CRC_24B_ATTACH); + fcw->bypass_intlv = check_bit(op->ldpc_enc.op_flags, + RTE_BBDEV_LDPC_INTERLEAVER_BYPASS); + fcw->mcb_count = num_cb; +} + +/* Fill in a frame control word for LDPC decoding. */ +static inline void +acc100_fcw_ld_fill(const struct rte_bbdev_dec_op *op, struct acc100_fcw_ld *fcw, + union acc100_harq_layout_data *harq_layout) +{ + uint16_t harq_out_length, harq_in_length, ncb_p, k0_p, parity_offset; + uint16_t harq_index; + uint32_t l; + bool harq_prun = false; + + fcw->qm = op->ldpc_dec.q_m; + fcw->nfiller = op->ldpc_dec.n_filler; + fcw->BG = (op->ldpc_dec.basegraph - 1); + fcw->Zc = op->ldpc_dec.z_c; + fcw->ncb = op->ldpc_dec.n_cb; + fcw->k0 = get_k0(fcw->ncb, fcw->Zc, op->ldpc_dec.basegraph, + op->ldpc_dec.rv_index); + if (op->ldpc_dec.code_block_mode == 1) + fcw->rm_e = op->ldpc_dec.cb_params.e; + else + fcw->rm_e = (op->ldpc_dec.tb_params.r < + op->ldpc_dec.tb_params.cab) ? + op->ldpc_dec.tb_params.ea : + op->ldpc_dec.tb_params.eb; + + fcw->hcin_en = check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE); + fcw->hcout_en = check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE); + fcw->crc_select = check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK); + fcw->bypass_dec = check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_DECODE_BYPASS); + fcw->bypass_intlv = check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_DEINTERLEAVER_BYPASS); + if (op->ldpc_dec.q_m == 1) { + fcw->bypass_intlv = 1; + fcw->qm = 2; + } + fcw->hcin_decomp_mode = check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION); + fcw->hcout_comp_mode = check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION); + fcw->llr_pack_mode = check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_LLR_COMPRESSION); + harq_index = op->ldpc_dec.harq_combined_output.offset / + ACC100_HARQ_OFFSET; +#ifdef ACC100_EXT_MEM + /* Limit cases when HARQ pruning is valid */ + harq_prun = ((op->ldpc_dec.harq_combined_output.offset % + ACC100_HARQ_OFFSET) == 0) && + (op->ldpc_dec.harq_combined_output.offset <= UINT16_MAX + * ACC100_HARQ_OFFSET); +#endif + if (fcw->hcin_en > 0) { + harq_in_length = op->ldpc_dec.harq_combined_input.length; + if (fcw->hcin_decomp_mode > 0) + harq_in_length = harq_in_length * 8 / 6; + harq_in_length = RTE_ALIGN(harq_in_length, 64); + if ((harq_layout[harq_index].offset > 0) & harq_prun) { + rte_bbdev_log_debug("HARQ IN offset unexpected for now\n"); + fcw->hcin_size0 = harq_layout[harq_index].size0; + fcw->hcin_offset = harq_layout[harq_index].offset; + fcw->hcin_size1 = harq_in_length - + harq_layout[harq_index].offset; + } else { + fcw->hcin_size0 = harq_in_length; + fcw->hcin_offset = 0; + fcw->hcin_size1 = 0; + } + } else { + fcw->hcin_size0 = 0; + fcw->hcin_offset = 0; + fcw->hcin_size1 = 0; + } + + fcw->itmax = op->ldpc_dec.iter_max; + fcw->itstop = check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE); + fcw->synd_precoder = fcw->itstop; + /* + * These are all implicitly set + * fcw->synd_post = 0; + * fcw->so_en = 0; + * fcw->so_bypass_rm = 0; + * fcw->so_bypass_intlv = 0; + * fcw->dec_convllr = 0; + * fcw->hcout_convllr = 0; + * fcw->hcout_size1 = 0; + * fcw->so_it = 0; + * fcw->hcout_offset = 0; + * fcw->negstop_th = 0; + * fcw->negstop_it = 0; + * fcw->negstop_en = 0; + * fcw->gain_i = 1; + * fcw->gain_h = 1; + */ + if (fcw->hcout_en > 0) { + parity_offset = (op->ldpc_dec.basegraph == 1 ? 20 : 8) + * op->ldpc_dec.z_c - op->ldpc_dec.n_filler; + k0_p = (fcw->k0 > parity_offset) ? + fcw->k0 - op->ldpc_dec.n_filler : fcw->k0; + ncb_p = fcw->ncb - op->ldpc_dec.n_filler; + l = k0_p + fcw->rm_e; + harq_out_length = (uint16_t) fcw->hcin_size0; + harq_out_length = RTE_MIN(RTE_MAX(harq_out_length, l), ncb_p); + harq_out_length = (harq_out_length + 0x3F) & 0xFFC0; + if ((k0_p > fcw->hcin_size0 + ACC100_HARQ_OFFSET_THRESHOLD) && + harq_prun) { + fcw->hcout_size0 = (uint16_t) fcw->hcin_size0; + fcw->hcout_offset = k0_p & 0xFFC0; + fcw->hcout_size1 = harq_out_length - fcw->hcout_offset; + } else { + fcw->hcout_size0 = harq_out_length; + fcw->hcout_size1 = 0; + fcw->hcout_offset = 0; + } + harq_layout[harq_index].offset = fcw->hcout_offset; + harq_layout[harq_index].size0 = fcw->hcout_size0; + } else { + fcw->hcout_size0 = 0; + fcw->hcout_size1 = 0; + fcw->hcout_offset = 0; + } +} + +/** + * Fills descriptor with data pointers of one block type. + * + * @param desc + * Pointer to DMA descriptor. + * @param input + * Pointer to pointer to input data which will be encoded. It can be changed + * and points to next segment in scatter-gather case. + * @param offset + * Input offset in rte_mbuf structure. It is used for calculating the point + * where data is starting. + * @param cb_len + * Length of currently processed Code Block + * @param seg_total_left + * It indicates how many bytes still left in segment (mbuf) for further + * processing. + * @param op_flags + * Store information about device capabilities + * @param next_triplet + * Index for ACC100 DMA Descriptor triplet + * + * @return + * Returns index of next triplet on success, other value if lengths of + * pkt and processed cb do not match. + * + */ +static inline int +acc100_dma_fill_blk_type_in(struct acc100_dma_req_desc *desc, + struct rte_mbuf **input, uint32_t *offset, uint32_t cb_len, + uint32_t *seg_total_left, int next_triplet) +{ + uint32_t part_len; + struct rte_mbuf *m = *input; + + part_len = (*seg_total_left < cb_len) ? *seg_total_left : cb_len; + cb_len -= part_len; + *seg_total_left -= part_len; + + desc->data_ptrs[next_triplet].address = + rte_pktmbuf_iova_offset(m, *offset); + desc->data_ptrs[next_triplet].blen = part_len; + desc->data_ptrs[next_triplet].blkid = ACC100_DMA_BLKID_IN; + desc->data_ptrs[next_triplet].last = 0; + desc->data_ptrs[next_triplet].dma_ext = 0; + *offset += part_len; + next_triplet++; + + while (cb_len > 0) { + if (next_triplet < ACC100_DMA_MAX_NUM_POINTERS && + m->next != NULL) { + + m = m->next; + *seg_total_left = rte_pktmbuf_data_len(m); + part_len = (*seg_total_left < cb_len) ? + *seg_total_left : + cb_len; + desc->data_ptrs[next_triplet].address = + rte_pktmbuf_mtophys(m); + desc->data_ptrs[next_triplet].blen = part_len; + desc->data_ptrs[next_triplet].blkid = + ACC100_DMA_BLKID_IN; + desc->data_ptrs[next_triplet].last = 0; + desc->data_ptrs[next_triplet].dma_ext = 0; + cb_len -= part_len; + *seg_total_left -= part_len; + /* Initializing offset for next segment (mbuf) */ + *offset = part_len; + next_triplet++; + } else { + rte_bbdev_log(ERR, + "Some data still left for processing: " + "data_left: %u, next_triplet: %u, next_mbuf: %p", + cb_len, next_triplet, m->next); + return -EINVAL; + } + } + /* Storing new mbuf as it could be changed in scatter-gather case*/ + *input = m; + + return next_triplet; +} + +/* Fills descriptor with data pointers of one block type. + * Returns index of next triplet on success, other value if lengths of + * output data and processed mbuf do not match. + */ +static inline int +acc100_dma_fill_blk_type_out(struct acc100_dma_req_desc *desc, + struct rte_mbuf *output, uint32_t out_offset, + uint32_t output_len, int next_triplet, int blk_id) +{ + desc->data_ptrs[next_triplet].address = + rte_pktmbuf_iova_offset(output, out_offset); + desc->data_ptrs[next_triplet].blen = output_len; + desc->data_ptrs[next_triplet].blkid = blk_id; + desc->data_ptrs[next_triplet].last = 0; + desc->data_ptrs[next_triplet].dma_ext = 0; + next_triplet++; + + return next_triplet; +} + +static inline int +acc100_dma_desc_le_fill(struct rte_bbdev_enc_op *op, + struct acc100_dma_req_desc *desc, struct rte_mbuf **input, + struct rte_mbuf *output, uint32_t *in_offset, + uint32_t *out_offset, uint32_t *out_length, + uint32_t *mbuf_total_left, uint32_t *seg_total_left) +{ + int next_triplet = 1; /* FCW already done */ + uint16_t K, in_length_in_bits, in_length_in_bytes; + struct rte_bbdev_op_ldpc_enc *enc = &op->ldpc_enc; + + desc->word0 = ACC100_DMA_DESC_TYPE; + desc->word1 = 0; /**< Timestamp could be disabled */ + desc->word2 = 0; + desc->word3 = 0; + desc->numCBs = 1; + + K = (enc->basegraph == 1 ? 22 : 10) * enc->z_c; + in_length_in_bits = K - enc->n_filler; + if ((enc->op_flags & RTE_BBDEV_LDPC_CRC_24A_ATTACH) || + (enc->op_flags & RTE_BBDEV_LDPC_CRC_24B_ATTACH)) + in_length_in_bits -= 24; + in_length_in_bytes = in_length_in_bits >> 3; + + if (unlikely((*mbuf_total_left == 0) || + (*mbuf_total_left < in_length_in_bytes))) { + rte_bbdev_log(ERR, + "Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u", + *mbuf_total_left, in_length_in_bytes); + return -1; + } + + next_triplet = acc100_dma_fill_blk_type_in(desc, input, in_offset, + in_length_in_bytes, + seg_total_left, next_triplet); + if (unlikely(next_triplet < 0)) { + rte_bbdev_log(ERR, + "Mismatch between data to process and mbuf data length in bbdev_op: %p", + op); + return -1; + } + desc->data_ptrs[next_triplet - 1].last = 1; + desc->m2dlen = next_triplet; + *mbuf_total_left -= in_length_in_bytes; + + /* Set output length */ + /* Integer round up division by 8 */ + *out_length = (enc->cb_params.e + 7) >> 3; + + next_triplet = acc100_dma_fill_blk_type_out(desc, output, *out_offset, + *out_length, next_triplet, ACC100_DMA_BLKID_OUT_ENC); + if (unlikely(next_triplet < 0)) { + rte_bbdev_log(ERR, + "Mismatch between data to process and mbuf data length in bbdev_op: %p", + op); + return -1; + } + op->ldpc_enc.output.length += *out_length; + *out_offset += *out_length; + desc->data_ptrs[next_triplet - 1].last = 1; + desc->data_ptrs[next_triplet - 1].dma_ext = 0; + desc->d2mlen = next_triplet - desc->m2dlen; + + desc->op_addr = op; + + return 0; +} + +static inline int +acc100_dma_desc_ld_fill(struct rte_bbdev_dec_op *op, + struct acc100_dma_req_desc *desc, + struct rte_mbuf **input, struct rte_mbuf *h_output, + uint32_t *in_offset, uint32_t *h_out_offset, + uint32_t *h_out_length, uint32_t *mbuf_total_left, + uint32_t *seg_total_left, + struct acc100_fcw_ld *fcw) +{ + struct rte_bbdev_op_ldpc_dec *dec = &op->ldpc_dec; + int next_triplet = 1; /* FCW already done */ + uint32_t input_length; + uint16_t output_length, crc24_overlap = 0; + uint16_t sys_cols, K, h_p_size, h_np_size; + bool h_comp = check_bit(dec->op_flags, + RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION); + + desc->word0 = ACC100_DMA_DESC_TYPE; + desc->word1 = 0; /**< Timestamp could be disabled */ + desc->word2 = 0; + desc->word3 = 0; + desc->numCBs = 1; + + if (check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP)) + crc24_overlap = 24; + + /* Compute some LDPC BG lengths */ + input_length = dec->cb_params.e; + if (check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_LLR_COMPRESSION)) + input_length = (input_length * 3 + 3) / 4; + sys_cols = (dec->basegraph == 1) ? 22 : 10; + K = sys_cols * dec->z_c; + output_length = K - dec->n_filler - crc24_overlap; + + if (unlikely((*mbuf_total_left == 0) || + (*mbuf_total_left < input_length))) { + rte_bbdev_log(ERR, + "Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u", + *mbuf_total_left, input_length); + return -1; + } + + next_triplet = acc100_dma_fill_blk_type_in(desc, input, + in_offset, input_length, + seg_total_left, next_triplet); + + if (unlikely(next_triplet < 0)) { + rte_bbdev_log(ERR, + "Mismatch between data to process and mbuf data length in bbdev_op: %p", + op); + return -1; + } + + if (check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE)) { + h_p_size = fcw->hcin_size0 + fcw->hcin_size1; + if (h_comp) + h_p_size = (h_p_size * 3 + 3) / 4; + desc->data_ptrs[next_triplet].address = + dec->harq_combined_input.offset; + desc->data_ptrs[next_triplet].blen = h_p_size; + desc->data_ptrs[next_triplet].blkid = ACC100_DMA_BLKID_IN_HARQ; + desc->data_ptrs[next_triplet].dma_ext = 1; +#ifndef ACC100_EXT_MEM + acc100_dma_fill_blk_type_out( + desc, + op->ldpc_dec.harq_combined_input.data, + op->ldpc_dec.harq_combined_input.offset, + h_p_size, + next_triplet, + ACC100_DMA_BLKID_IN_HARQ); +#endif + next_triplet++; + } + + desc->data_ptrs[next_triplet - 1].last = 1; + desc->m2dlen = next_triplet; + *mbuf_total_left -= input_length; + + next_triplet = acc100_dma_fill_blk_type_out(desc, h_output, + *h_out_offset, output_length >> 3, next_triplet, + ACC100_DMA_BLKID_OUT_HARD); + if (unlikely(next_triplet < 0)) { + rte_bbdev_log(ERR, + "Mismatch between data to process and mbuf data length in bbdev_op: %p", + op); + return -1; + } + + if (check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE)) { + /* Pruned size of the HARQ */ + h_p_size = fcw->hcout_size0 + fcw->hcout_size1; + /* Non-Pruned size of the HARQ */ + h_np_size = fcw->hcout_offset > 0 ? + fcw->hcout_offset + fcw->hcout_size1 : + h_p_size; + if (h_comp) { + h_np_size = (h_np_size * 3 + 3) / 4; + h_p_size = (h_p_size * 3 + 3) / 4; + } + dec->harq_combined_output.length = h_np_size; + desc->data_ptrs[next_triplet].address = + dec->harq_combined_output.offset; + desc->data_ptrs[next_triplet].blen = h_p_size; + desc->data_ptrs[next_triplet].blkid = ACC100_DMA_BLKID_OUT_HARQ; + desc->data_ptrs[next_triplet].dma_ext = 1; +#ifndef ACC100_EXT_MEM + acc100_dma_fill_blk_type_out( + desc, + dec->harq_combined_output.data, + dec->harq_combined_output.offset, + h_p_size, + next_triplet, + ACC100_DMA_BLKID_OUT_HARQ); +#endif + next_triplet++; + } + + *h_out_length = output_length >> 3; + dec->hard_output.length += *h_out_length; + *h_out_offset += *h_out_length; + desc->data_ptrs[next_triplet - 1].last = 1; + desc->d2mlen = next_triplet - desc->m2dlen; + + desc->op_addr = op; + + return 0; +} + +static inline void +acc100_dma_desc_ld_update(struct rte_bbdev_dec_op *op, + struct acc100_dma_req_desc *desc, + struct rte_mbuf *input, struct rte_mbuf *h_output, + uint32_t *in_offset, uint32_t *h_out_offset, + uint32_t *h_out_length, + union acc100_harq_layout_data *harq_layout) +{ + int next_triplet = 1; /* FCW already done */ + desc->data_ptrs[next_triplet].address = + rte_pktmbuf_iova_offset(input, *in_offset); + next_triplet++; + + if (check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE)) { + struct rte_bbdev_op_data hi = op->ldpc_dec.harq_combined_input; + desc->data_ptrs[next_triplet].address = hi.offset; +#ifndef ACC100_EXT_MEM + desc->data_ptrs[next_triplet].address = + rte_pktmbuf_iova_offset(hi.data, hi.offset); +#endif + next_triplet++; + } + + desc->data_ptrs[next_triplet].address = + rte_pktmbuf_iova_offset(h_output, *h_out_offset); + *h_out_length = desc->data_ptrs[next_triplet].blen; + next_triplet++; + + if (check_bit(op->ldpc_dec.op_flags, + RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE)) { + desc->data_ptrs[next_triplet].address = + op->ldpc_dec.harq_combined_output.offset; + /* Adjust based on previous operation */ + struct rte_bbdev_dec_op *prev_op = desc->op_addr; + op->ldpc_dec.harq_combined_output.length = + prev_op->ldpc_dec.harq_combined_output.length; + int16_t hq_idx = op->ldpc_dec.harq_combined_output.offset / + ACC100_HARQ_OFFSET; + int16_t prev_hq_idx = + prev_op->ldpc_dec.harq_combined_output.offset + / ACC100_HARQ_OFFSET; + harq_layout[hq_idx].val = harq_layout[prev_hq_idx].val; +#ifndef ACC100_EXT_MEM + struct rte_bbdev_op_data ho = + op->ldpc_dec.harq_combined_output; + desc->data_ptrs[next_triplet].address = + rte_pktmbuf_iova_offset(ho.data, ho.offset); +#endif + next_triplet++; + } + + op->ldpc_dec.hard_output.length += *h_out_length; + desc->op_addr = op; +} + + +/* Enqueue a number of operations to HW and update software rings */ +static inline void +acc100_dma_enqueue(struct acc100_queue *q, uint16_t n, + struct rte_bbdev_stats *queue_stats) +{ + union acc100_enqueue_reg_fmt enq_req; +#ifdef RTE_BBDEV_OFFLOAD_COST + uint64_t start_time = 0; + queue_stats->acc_offload_cycles = 0; + RTE_SET_USED(queue_stats); +#else + RTE_SET_USED(queue_stats); +#endif + + enq_req.val = 0; + /* Setting offset, 100b for 256 DMA Desc */ + enq_req.addr_offset = ACC100_DESC_OFFSET; + + /* Split ops into batches */ + do { + union acc100_dma_desc *desc; + uint16_t enq_batch_size; + uint64_t offset; + rte_iova_t req_elem_addr; + + enq_batch_size = RTE_MIN(n, MAX_ENQ_BATCH_SIZE); + + /* Set flag on last descriptor in a batch */ + desc = q->ring_addr + ((q->sw_ring_head + enq_batch_size - 1) & + q->sw_ring_wrap_mask); + desc->req.last_desc_in_batch = 1; + + /* Calculate the 1st descriptor's address */ + offset = ((q->sw_ring_head & q->sw_ring_wrap_mask) * + sizeof(union acc100_dma_desc)); + req_elem_addr = q->ring_addr_phys + offset; + + /* Fill enqueue struct */ + enq_req.num_elem = enq_batch_size; + /* low 6 bits are not needed */ + enq_req.req_elem_addr = (uint32_t)(req_elem_addr >> 6); + +#ifdef RTE_LIBRTE_BBDEV_DEBUG + rte_memdump(stderr, "Req sdone", desc, sizeof(*desc)); +#endif + rte_bbdev_log_debug( + "Enqueue %u reqs (phys %#"PRIx64") to reg %p", + enq_batch_size, + req_elem_addr, + (void *)q->mmio_reg_enqueue); + + rte_wmb(); + +#ifdef RTE_BBDEV_OFFLOAD_COST + /* Start time measurement for enqueue function offload. */ + start_time = rte_rdtsc_precise(); +#endif + rte_bbdev_log(DEBUG, "Debug : MMIO Enqueue"); + mmio_write(q->mmio_reg_enqueue, enq_req.val); + +#ifdef RTE_BBDEV_OFFLOAD_COST + queue_stats->acc_offload_cycles += + rte_rdtsc_precise() - start_time; +#endif + + q->aq_enqueued++; + q->sw_ring_head += enq_batch_size; + n -= enq_batch_size; + + } while (n); + + +} + +/* Enqueue one encode operations for ACC100 device in CB mode */ +static inline int +enqueue_ldpc_enc_n_op_cb(struct acc100_queue *q, struct rte_bbdev_enc_op **ops, + uint16_t total_enqueued_cbs, int16_t num) +{ + union acc100_dma_desc *desc = NULL; + uint32_t out_length; + struct rte_mbuf *output_head, *output; + int i, next_triplet; + uint16_t in_length_in_bytes; + struct rte_bbdev_op_ldpc_enc *enc = &ops[0]->ldpc_enc; + + uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs) + & q->sw_ring_wrap_mask); + desc = q->ring_addr + desc_idx; + acc100_fcw_le_fill(ops[0], &desc->req.fcw_le, num); + + /** This could be done at polling */ + desc->req.word0 = ACC100_DMA_DESC_TYPE; + desc->req.word1 = 0; /**< Timestamp could be disabled */ + desc->req.word2 = 0; + desc->req.word3 = 0; + desc->req.numCBs = num; + + in_length_in_bytes = ops[0]->ldpc_enc.input.data->data_len; + out_length = (enc->cb_params.e + 7) >> 3; + desc->req.m2dlen = 1 + num; + desc->req.d2mlen = num; + next_triplet = 1; + + for (i = 0; i < num; i++) { + desc->req.data_ptrs[next_triplet].address = + rte_pktmbuf_iova_offset(ops[i]->ldpc_enc.input.data, 0); + desc->req.data_ptrs[next_triplet].blen = in_length_in_bytes; + next_triplet++; + desc->req.data_ptrs[next_triplet].address = + rte_pktmbuf_iova_offset( + ops[i]->ldpc_enc.output.data, 0); + desc->req.data_ptrs[next_triplet].blen = out_length; + next_triplet++; + ops[i]->ldpc_enc.output.length = out_length; + output_head = output = ops[i]->ldpc_enc.output.data; + mbuf_append(output_head, output, out_length); + output->data_len = out_length; + } + + desc->req.op_addr = ops[0]; + +#ifdef RTE_LIBRTE_BBDEV_DEBUG + rte_memdump(stderr, "FCW", &desc->req.fcw_le, + sizeof(desc->req.fcw_le) - 8); + rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc)); +#endif + + /* One CB (one op) was successfully prepared to enqueue */ + return num; +} + +/* Enqueue one encode operations for ACC100 device in CB mode */ +static inline int +enqueue_ldpc_enc_one_op_cb(struct acc100_queue *q, struct rte_bbdev_enc_op *op, + uint16_t total_enqueued_cbs) +{ + union acc100_dma_desc *desc = NULL; + int ret; + uint32_t in_offset, out_offset, out_length, mbuf_total_left, + seg_total_left; + struct rte_mbuf *input, *output_head, *output; + + uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs) + & q->sw_ring_wrap_mask); + desc = q->ring_addr + desc_idx; + acc100_fcw_le_fill(op, &desc->req.fcw_le, 1); + + input = op->ldpc_enc.input.data; + output_head = output = op->ldpc_enc.output.data; + in_offset = op->ldpc_enc.input.offset; + out_offset = op->ldpc_enc.output.offset; + out_length = 0; + mbuf_total_left = op->ldpc_enc.input.length; + seg_total_left = rte_pktmbuf_data_len(op->ldpc_enc.input.data) + - in_offset; + + ret = acc100_dma_desc_le_fill(op, &desc->req, &input, output, + &in_offset, &out_offset, &out_length, &mbuf_total_left, + &seg_total_left); + + if (unlikely(ret < 0)) + return ret; + + mbuf_append(output_head, output, out_length); + +#ifdef RTE_LIBRTE_BBDEV_DEBUG + rte_memdump(stderr, "FCW", &desc->req.fcw_le, + sizeof(desc->req.fcw_le) - 8); + rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc)); + + /* Check if any data left after processing one CB */ + if (mbuf_total_left != 0) { + rte_bbdev_log(ERR, + "Some date still left after processing one CB: mbuf_total_left = %u", + mbuf_total_left); + return -EINVAL; + } +#endif + /* One CB (one op) was successfully prepared to enqueue */ + return 1; +} + +/** Enqueue one decode operations for ACC100 device in CB mode */ +static inline int +enqueue_ldpc_dec_one_op_cb(struct acc100_queue *q, struct rte_bbdev_dec_op *op, + uint16_t total_enqueued_cbs, bool same_op) +{ + int ret; + + union acc100_dma_desc *desc; + uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs) + & q->sw_ring_wrap_mask); + desc = q->ring_addr + desc_idx; + struct rte_mbuf *input, *h_output_head, *h_output; + uint32_t in_offset, h_out_offset, h_out_length, mbuf_total_left; + input = op->ldpc_dec.input.data; + h_output_head = h_output = op->ldpc_dec.hard_output.data; + in_offset = op->ldpc_dec.input.offset; + h_out_offset = op->ldpc_dec.hard_output.offset; + mbuf_total_left = op->ldpc_dec.input.length; +#ifdef RTE_LIBRTE_BBDEV_DEBUG + if (unlikely(input == NULL)) { + rte_bbdev_log(ERR, "Invalid mbuf pointer"); + return -EFAULT; + } +#endif + union acc100_harq_layout_data *harq_layout = q->d->harq_layout; + + if (same_op) { + union acc100_dma_desc *prev_desc; + desc_idx = ((q->sw_ring_head + total_enqueued_cbs - 1) + & q->sw_ring_wrap_mask); + prev_desc = q->ring_addr + desc_idx; + uint8_t *prev_ptr = (uint8_t *) prev_desc; + uint8_t *new_ptr = (uint8_t *) desc; + /* Copy first 4 words and BDESCs */ + rte_memcpy(new_ptr, prev_ptr, 16); + rte_memcpy(new_ptr + 36, prev_ptr + 36, 40); + desc->req.op_addr = prev_desc->req.op_addr; + /* Copy FCW */ + rte_memcpy(new_ptr + ACC100_DESC_FCW_OFFSET, + prev_ptr + ACC100_DESC_FCW_OFFSET, + ACC100_FCW_LD_BLEN); + acc100_dma_desc_ld_update(op, &desc->req, input, h_output, + &in_offset, &h_out_offset, + &h_out_length, harq_layout); + } else { + struct acc100_fcw_ld *fcw; + uint32_t seg_total_left; + fcw = &desc->req.fcw_ld; + acc100_fcw_ld_fill(op, fcw, harq_layout); + + /* Special handling when overusing mbuf */ + if (fcw->rm_e < MAX_E_MBUF) + seg_total_left = rte_pktmbuf_data_len(input) + - in_offset; + else + seg_total_left = fcw->rm_e; + + ret = acc100_dma_desc_ld_fill(op, &desc->req, &input, h_output, + &in_offset, &h_out_offset, + &h_out_length, &mbuf_total_left, + &seg_total_left, fcw); + if (unlikely(ret < 0)) + return ret; + } + + /* Hard output */ + mbuf_append(h_output_head, h_output, h_out_length); +#ifndef ACC100_EXT_MEM + if (op->ldpc_dec.harq_combined_output.length > 0) { + /* Push the HARQ output into host memory */ + struct rte_mbuf *hq_output_head, *hq_output; + hq_output_head = op->ldpc_dec.harq_combined_output.data; + hq_output = op->ldpc_dec.harq_combined_output.data; + mbuf_append(hq_output_head, hq_output, + op->ldpc_dec.harq_combined_output.length); + } +#endif + +#ifdef RTE_LIBRTE_BBDEV_DEBUG + rte_memdump(stderr, "FCW", &desc->req.fcw_ld, + sizeof(desc->req.fcw_ld) - 8); + rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc)); +#endif + + /* One CB (one op) was successfully prepared to enqueue */ + return 1; +} + + +/* Enqueue one decode operations for ACC100 device in TB mode */ +static inline int +enqueue_ldpc_dec_one_op_tb(struct acc100_queue *q, struct rte_bbdev_dec_op *op, + uint16_t total_enqueued_cbs, uint8_t cbs_in_tb) +{ + union acc100_dma_desc *desc = NULL; + int ret; + uint8_t r, c; + uint32_t in_offset, h_out_offset, + h_out_length, mbuf_total_left, seg_total_left; + struct rte_mbuf *input, *h_output_head, *h_output; + uint16_t current_enqueued_cbs = 0; + + uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs) + & q->sw_ring_wrap_mask); + desc = q->ring_addr + desc_idx; + uint64_t fcw_offset = (desc_idx << 8) + ACC100_DESC_FCW_OFFSET; + union acc100_harq_layout_data *harq_layout = q->d->harq_layout; + acc100_fcw_ld_fill(op, &desc->req.fcw_ld, harq_layout); + + input = op->ldpc_dec.input.data; + h_output_head = h_output = op->ldpc_dec.hard_output.data; + in_offset = op->ldpc_dec.input.offset; + h_out_offset = op->ldpc_dec.hard_output.offset; + h_out_length = 0; + mbuf_total_left = op->ldpc_dec.input.length; + c = op->ldpc_dec.tb_params.c; + r = op->ldpc_dec.tb_params.r; + + while (mbuf_total_left > 0 && r < c) { + + seg_total_left = rte_pktmbuf_data_len(input) - in_offset; + + /* Set up DMA descriptor */ + desc = q->ring_addr + ((q->sw_ring_head + total_enqueued_cbs) + & q->sw_ring_wrap_mask); + desc->req.data_ptrs[0].address = q->ring_addr_phys + fcw_offset; + desc->req.data_ptrs[0].blen = ACC100_FCW_LD_BLEN; + ret = acc100_dma_desc_ld_fill(op, &desc->req, &input, + h_output, &in_offset, &h_out_offset, + &h_out_length, + &mbuf_total_left, &seg_total_left, + &desc->req.fcw_ld); + + if (unlikely(ret < 0)) + return ret; + + /* Hard output */ + mbuf_append(h_output_head, h_output, h_out_length); + + /* Set total number of CBs in TB */ + desc->req.cbs_in_tb = cbs_in_tb; +#ifdef RTE_LIBRTE_BBDEV_DEBUG + rte_memdump(stderr, "FCW", &desc->req.fcw_td, + sizeof(desc->req.fcw_td) - 8); + rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc)); +#endif + + if (seg_total_left == 0) { + /* Go to the next mbuf */ + input = input->next; + in_offset = 0; + h_output = h_output->next; + h_out_offset = 0; + } + total_enqueued_cbs++; + current_enqueued_cbs++; + r++; + } + + if (unlikely(desc == NULL)) + return current_enqueued_cbs; + +#ifdef RTE_LIBRTE_BBDEV_DEBUG + /* Check if any CBs left for processing */ + if (mbuf_total_left != 0) { + rte_bbdev_log(ERR, + "Some date still left for processing: mbuf_total_left = %u", + mbuf_total_left); + return -EINVAL; + } +#endif + /* Set SDone on last CB descriptor for TB mode */ + desc->req.sdone_enable = 1; + desc->req.irq_enable = q->irq_enable; + + return current_enqueued_cbs; +} + + +/* Calculates number of CBs in processed encoder TB based on 'r' and input + * length. + */ +static inline uint8_t +get_num_cbs_in_tb_enc(struct rte_bbdev_op_turbo_enc *turbo_enc) +{ + uint8_t c, c_neg, r, crc24_bits = 0; + uint16_t k, k_neg, k_pos; + uint8_t cbs_in_tb = 0; + int32_t length; + + length = turbo_enc->input.length; + r = turbo_enc->tb_params.r; + c = turbo_enc->tb_params.c; + c_neg = turbo_enc->tb_params.c_neg; + k_neg = turbo_enc->tb_params.k_neg; + k_pos = turbo_enc->tb_params.k_pos; + crc24_bits = 0; + if (check_bit(turbo_enc->op_flags, RTE_BBDEV_TURBO_CRC_24B_ATTACH)) + crc24_bits = 24; + while (length > 0 && r < c) { + k = (r < c_neg) ? k_neg : k_pos; + length -= (k - crc24_bits) >> 3; + r++; + cbs_in_tb++; + } + + return cbs_in_tb; +} + +/* Calculates number of CBs in processed decoder TB based on 'r' and input + * length. + */ +static inline uint16_t +get_num_cbs_in_tb_dec(struct rte_bbdev_op_turbo_dec *turbo_dec) +{ + uint8_t c, c_neg, r = 0; + uint16_t kw, k, k_neg, k_pos, cbs_in_tb = 0; + int32_t length; + + length = turbo_dec->input.length; + r = turbo_dec->tb_params.r; + c = turbo_dec->tb_params.c; + c_neg = turbo_dec->tb_params.c_neg; + k_neg = turbo_dec->tb_params.k_neg; + k_pos = turbo_dec->tb_params.k_pos; + while (length > 0 && r < c) { + k = (r < c_neg) ? k_neg : k_pos; + kw = RTE_ALIGN_CEIL(k + 4, 32) * 3; + length -= kw; + r++; + cbs_in_tb++; + } + + return cbs_in_tb; +} + +/* Calculates number of CBs in processed decoder TB based on 'r' and input + * length. + */ +static inline uint16_t +get_num_cbs_in_tb_ldpc_dec(struct rte_bbdev_op_ldpc_dec *ldpc_dec) +{ + uint16_t r, cbs_in_tb = 0; + int32_t length = ldpc_dec->input.length; + r = ldpc_dec->tb_params.r; + while (length > 0 && r < ldpc_dec->tb_params.c) { + length -= (r < ldpc_dec->tb_params.cab) ? + ldpc_dec->tb_params.ea : + ldpc_dec->tb_params.eb; + r++; + cbs_in_tb++; + } + return cbs_in_tb; +} + +/* Check we can mux encode operations with common FCW */ +static inline bool +check_mux(struct rte_bbdev_enc_op **ops, uint16_t num) { + uint16_t i; + if (num == 1) + return false; + for (i = 1; i < num; ++i) { + /* Only mux compatible code blocks */ + if (memcmp((uint8_t *)(&ops[i]->ldpc_enc) + ENC_OFFSET, + (uint8_t *)(&ops[0]->ldpc_enc) + ENC_OFFSET, + CMP_ENC_SIZE) != 0) + return false; + } + return true; +} + +/** Enqueue encode operations for ACC100 device in CB mode. */ +static inline uint16_t +acc100_enqueue_ldpc_enc_cb(struct rte_bbdev_queue_data *q_data, + struct rte_bbdev_enc_op **ops, uint16_t num) +{ + struct acc100_queue *q = q_data->queue_private; + int32_t avail = q->sw_ring_depth + q->sw_ring_tail - q->sw_ring_head; + uint16_t i = 0; + union acc100_dma_desc *desc; + int ret, desc_idx = 0; + int16_t enq, left = num; + + while (left > 0) { + if (unlikely(avail - 1 < 0)) + break; + avail--; + enq = RTE_MIN(left, MUX_5GDL_DESC); + if (check_mux(&ops[i], enq)) { + ret = enqueue_ldpc_enc_n_op_cb(q, &ops[i], + desc_idx, enq); + if (ret < 0) + break; + i += enq; + } else { + ret = enqueue_ldpc_enc_one_op_cb(q, ops[i], desc_idx); + if (ret < 0) + break; + i++; + } + desc_idx++; + left = num - i; + } + + if (unlikely(i == 0)) + return 0; /* Nothing to enqueue */ + + /* Set SDone in last CB in enqueued ops for CB mode*/ + desc = q->ring_addr + ((q->sw_ring_head + desc_idx - 1) + & q->sw_ring_wrap_mask); + desc->req.sdone_enable = 1; + desc->req.irq_enable = q->irq_enable; + + acc100_dma_enqueue(q, desc_idx, &q_data->queue_stats); + + /* Update stats */ + q_data->queue_stats.enqueued_count += i; + q_data->queue_stats.enqueue_err_count += num - i; + + return i; +} + +/* Enqueue encode operations for ACC100 device. */ +static uint16_t +acc100_enqueue_ldpc_enc(struct rte_bbdev_queue_data *q_data, + struct rte_bbdev_enc_op **ops, uint16_t num) +{ + if (unlikely(num == 0)) + return 0; + return acc100_enqueue_ldpc_enc_cb(q_data, ops, num); +} + +/* Check we can mux encode operations with common FCW */ +static inline bool +cmp_ldpc_dec_op(struct rte_bbdev_dec_op **ops) { + /* Only mux compatible code blocks */ + if (memcmp((uint8_t *)(&ops[0]->ldpc_dec) + DEC_OFFSET, + (uint8_t *)(&ops[1]->ldpc_dec) + + DEC_OFFSET, CMP_DEC_SIZE) != 0) { + return false; + } else + return true; +} + + +/* Enqueue decode operations for ACC100 device in TB mode */ +static uint16_t +acc100_enqueue_ldpc_dec_tb(struct rte_bbdev_queue_data *q_data, + struct rte_bbdev_dec_op **ops, uint16_t num) +{ + struct acc100_queue *q = q_data->queue_private; + int32_t avail = q->sw_ring_depth + q->sw_ring_tail - q->sw_ring_head; + uint16_t i, enqueued_cbs = 0; + uint8_t cbs_in_tb; + int ret; + + for (i = 0; i < num; ++i) { + cbs_in_tb = get_num_cbs_in_tb_ldpc_dec(&ops[i]->ldpc_dec); + /* Check if there are available space for further processing */ + if (unlikely(avail - cbs_in_tb < 0)) + break; + avail -= cbs_in_tb; + + ret = enqueue_ldpc_dec_one_op_tb(q, ops[i], + enqueued_cbs, cbs_in_tb); + if (ret < 0) + break; + enqueued_cbs += ret; + } + + acc100_dma_enqueue(q, enqueued_cbs, &q_data->queue_stats); + + /* Update stats */ + q_data->queue_stats.enqueued_count += i; + q_data->queue_stats.enqueue_err_count += num - i; + return i; +} + +/* Enqueue decode operations for ACC100 device in CB mode */ +static uint16_t +acc100_enqueue_ldpc_dec_cb(struct rte_bbdev_queue_data *q_data, + struct rte_bbdev_dec_op **ops, uint16_t num) +{ + struct acc100_queue *q = q_data->queue_private; + int32_t avail = q->sw_ring_depth + q->sw_ring_tail - q->sw_ring_head; + uint16_t i; + union acc100_dma_desc *desc; + int ret; + bool same_op = false; + for (i = 0; i < num; ++i) { + /* Check if there are available space for further processing */ + if (unlikely(avail - 1 < 0)) + break; + avail -= 1; + + if (i > 0) + same_op = cmp_ldpc_dec_op(&ops[i-1]); + rte_bbdev_log(INFO, "Op %d %d %d %d %d %d %d %d %d %d %d %d\n", + i, ops[i]->ldpc_dec.op_flags, ops[i]->ldpc_dec.rv_index, + ops[i]->ldpc_dec.iter_max, ops[i]->ldpc_dec.iter_count, + ops[i]->ldpc_dec.basegraph, ops[i]->ldpc_dec.z_c, + ops[i]->ldpc_dec.n_cb, ops[i]->ldpc_dec.q_m, + ops[i]->ldpc_dec.n_filler, ops[i]->ldpc_dec.cb_params.e, + same_op); + ret = enqueue_ldpc_dec_one_op_cb(q, ops[i], i, same_op); + if (ret < 0) + break; + } + + if (unlikely(i == 0)) + return 0; /* Nothing to enqueue */ + + /* Set SDone in last CB in enqueued ops for CB mode*/ + desc = q->ring_addr + ((q->sw_ring_head + i - 1) + & q->sw_ring_wrap_mask); + + desc->req.sdone_enable = 1; + desc->req.irq_enable = q->irq_enable; + + acc100_dma_enqueue(q, i, &q_data->queue_stats); + + /* Update stats */ + q_data->queue_stats.enqueued_count += i; + q_data->queue_stats.enqueue_err_count += num - i; + return i; +} + +/* Enqueue decode operations for ACC100 device. */ +static uint16_t +acc100_enqueue_ldpc_dec(struct rte_bbdev_queue_data *q_data, + struct rte_bbdev_dec_op **ops, uint16_t num) +{ + struct acc100_queue *q = q_data->queue_private; + int32_t aq_avail = q->aq_depth + + (q->aq_dequeued - q->aq_enqueued) / 128; + + if (unlikely((aq_avail == 0) || (num == 0))) + return 0; + + if (ops[0]->ldpc_dec.code_block_mode == 0) + return acc100_enqueue_ldpc_dec_tb(q_data, ops, num); + else + return acc100_enqueue_ldpc_dec_cb(q_data, ops, num); +} + + +/* Dequeue one encode operations from ACC100 device in CB mode */ +static inline int +dequeue_enc_one_op_cb(struct acc100_queue *q, struct rte_bbdev_enc_op **ref_op, + uint16_t total_dequeued_cbs, uint32_t *aq_dequeued) +{ + union acc100_dma_desc *desc, atom_desc; + union acc100_dma_rsp_desc rsp; + struct rte_bbdev_enc_op *op; + int i; + + desc = q->ring_addr + ((q->sw_ring_tail + total_dequeued_cbs) + & q->sw_ring_wrap_mask); + atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc, + __ATOMIC_RELAXED); + + /* Check fdone bit */ + if (!(atom_desc.rsp.val & ACC100_FDONE)) + return -1; + + rsp.val = atom_desc.rsp.val; + rte_bbdev_log_debug("Resp. desc %p: %x", desc, rsp.val); + + /* Dequeue */ + op = desc->req.op_addr; + + /* Clearing status, it will be set based on response */ + op->status = 0; + + op->status |= ((rsp.input_err) + ? (1 << RTE_BBDEV_DATA_ERROR) : 0); + op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0); + op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0); + + if (desc->req.last_desc_in_batch) { + (*aq_dequeued)++; + desc->req.last_desc_in_batch = 0; + } + desc->rsp.val = ACC100_DMA_DESC_TYPE; + desc->rsp.add_info_0 = 0; /*Reserved bits */ + desc->rsp.add_info_1 = 0; /*Reserved bits */ + + /* Flag that the muxing cause loss of opaque data */ + op->opaque_data = (void *)-1; + for (i = 0 ; i < desc->req.numCBs; i++) + ref_op[i] = op; + + /* One CB (op) was successfully dequeued */ + return desc->req.numCBs; +} + +/* Dequeue one encode operations from ACC100 device in TB mode */ +static inline int +dequeue_enc_one_op_tb(struct acc100_queue *q, struct rte_bbdev_enc_op **ref_op, + uint16_t total_dequeued_cbs, uint32_t *aq_dequeued) +{ + union acc100_dma_desc *desc, *last_desc, atom_desc; + union acc100_dma_rsp_desc rsp; + struct rte_bbdev_enc_op *op; + uint8_t i = 0; + uint16_t current_dequeued_cbs = 0, cbs_in_tb; + + desc = q->ring_addr + ((q->sw_ring_tail + total_dequeued_cbs) + & q->sw_ring_wrap_mask); + atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc, + __ATOMIC_RELAXED); + + /* Check fdone bit */ + if (!(atom_desc.rsp.val & ACC100_FDONE)) + return -1; + + /* Get number of CBs in dequeued TB */ + cbs_in_tb = desc->req.cbs_in_tb; + /* Get last CB */ + last_desc = q->ring_addr + ((q->sw_ring_tail + + total_dequeued_cbs + cbs_in_tb - 1) + & q->sw_ring_wrap_mask); + /* Check if last CB in TB is ready to dequeue (and thus + * the whole TB) - checking sdone bit. If not return. + */ + atom_desc.atom_hdr = __atomic_load_n((uint64_t *)last_desc, + __ATOMIC_RELAXED); + if (!(atom_desc.rsp.val & ACC100_SDONE)) + return -1; + + /* Dequeue */ + op = desc->req.op_addr; + + /* Clearing status, it will be set based on response */ + op->status = 0; + + while (i < cbs_in_tb) { + desc = q->ring_addr + ((q->sw_ring_tail + + total_dequeued_cbs) + & q->sw_ring_wrap_mask); + atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc, + __ATOMIC_RELAXED); + rsp.val = atom_desc.rsp.val; + rte_bbdev_log_debug("Resp. desc %p: %x", desc, + rsp.val); + + op->status |= ((rsp.input_err) + ? (1 << RTE_BBDEV_DATA_ERROR) : 0); + op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0); + op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0); + + if (desc->req.last_desc_in_batch) { + (*aq_dequeued)++; + desc->req.last_desc_in_batch = 0; + } + desc->rsp.val = ACC100_DMA_DESC_TYPE; + desc->rsp.add_info_0 = 0; + desc->rsp.add_info_1 = 0; + total_dequeued_cbs++; + current_dequeued_cbs++; + i++; + } + + *ref_op = op; + + return current_dequeued_cbs; +} + +/* Dequeue one decode operation from ACC100 device in CB mode */ +static inline int +dequeue_dec_one_op_cb(struct rte_bbdev_queue_data *q_data, + struct acc100_queue *q, struct rte_bbdev_dec_op **ref_op, + uint16_t dequeued_cbs, uint32_t *aq_dequeued) +{ + union acc100_dma_desc *desc, atom_desc; + union acc100_dma_rsp_desc rsp; + struct rte_bbdev_dec_op *op; + + desc = q->ring_addr + ((q->sw_ring_tail + dequeued_cbs) + & q->sw_ring_wrap_mask); + atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc, + __ATOMIC_RELAXED); + + /* Check fdone bit */ + if (!(atom_desc.rsp.val & ACC100_FDONE)) + return -1; + + rsp.val = atom_desc.rsp.val; + rte_bbdev_log_debug("Resp. desc %p: %x", desc, rsp.val); + + /* Dequeue */ + op = desc->req.op_addr; + + /* Clearing status, it will be set based on response */ + op->status = 0; + op->status |= ((rsp.input_err) + ? (1 << RTE_BBDEV_DATA_ERROR) : 0); + op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0); + op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0); + if (op->status != 0) + q_data->queue_stats.dequeue_err_count++; + + /* CRC invalid if error exists */ + if (!op->status) + op->status |= rsp.crc_status << RTE_BBDEV_CRC_ERROR; + op->turbo_dec.iter_count = (uint8_t) rsp.iter_cnt / 2; + /* Check if this is the last desc in batch (Atomic Queue) */ + if (desc->req.last_desc_in_batch) { + (*aq_dequeued)++; + desc->req.last_desc_in_batch = 0; + } + desc->rsp.val = ACC100_DMA_DESC_TYPE; + desc->rsp.add_info_0 = 0; + desc->rsp.add_info_1 = 0; + *ref_op = op; + + /* One CB (op) was successfully dequeued */ + return 1; +} + +/* Dequeue one decode operations from ACC100 device in CB mode */ +static inline int +dequeue_ldpc_dec_one_op_cb(struct rte_bbdev_queue_data *q_data, + struct acc100_queue *q, struct rte_bbdev_dec_op **ref_op, + uint16_t dequeued_cbs, uint32_t *aq_dequeued) +{ + union acc100_dma_desc *desc, atom_desc; + union acc100_dma_rsp_desc rsp; + struct rte_bbdev_dec_op *op; + + desc = q->ring_addr + ((q->sw_ring_tail + dequeued_cbs) + & q->sw_ring_wrap_mask); + atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc, + __ATOMIC_RELAXED); + + /* Check fdone bit */ + if (!(atom_desc.rsp.val & ACC100_FDONE)) + return -1; + + rsp.val = atom_desc.rsp.val; + + /* Dequeue */ + op = desc->req.op_addr; + + /* Clearing status, it will be set based on response */ + op->status = 0; + op->status |= rsp.input_err << RTE_BBDEV_DATA_ERROR; + op->status |= rsp.dma_err << RTE_BBDEV_DRV_ERROR; + op->status |= rsp.fcw_err << RTE_BBDEV_DRV_ERROR; + if (op->status != 0) + q_data->queue_stats.dequeue_err_count++; + + op->status |= rsp.crc_status << RTE_BBDEV_CRC_ERROR; + if (op->ldpc_dec.hard_output.length > 0 && !rsp.synd_ok) + op->status |= 1 << RTE_BBDEV_SYNDROME_ERROR; + op->ldpc_dec.iter_count = (uint8_t) rsp.iter_cnt; + + /* Check if this is the last desc in batch (Atomic Queue) */ + if (desc->req.last_desc_in_batch) { + (*aq_dequeued)++; + desc->req.last_desc_in_batch = 0; + } + + desc->rsp.val = ACC100_DMA_DESC_TYPE; + desc->rsp.add_info_0 = 0; + desc->rsp.add_info_1 = 0; + + *ref_op = op; + + /* One CB (op) was successfully dequeued */ + return 1; +} + +/* Dequeue one decode operations from ACC100 device in TB mode. */ +static inline int +dequeue_dec_one_op_tb(struct acc100_queue *q, struct rte_bbdev_dec_op **ref_op, + uint16_t dequeued_cbs, uint32_t *aq_dequeued) +{ + union acc100_dma_desc *desc, *last_desc, atom_desc; + union acc100_dma_rsp_desc rsp; + struct rte_bbdev_dec_op *op; + uint8_t cbs_in_tb = 1, cb_idx = 0; + + desc = q->ring_addr + ((q->sw_ring_tail + dequeued_cbs) + & q->sw_ring_wrap_mask); + atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc, + __ATOMIC_RELAXED); + + /* Check fdone bit */ + if (!(atom_desc.rsp.val & ACC100_FDONE)) + return -1; + + /* Dequeue */ + op = desc->req.op_addr; + + /* Get number of CBs in dequeued TB */ + cbs_in_tb = desc->req.cbs_in_tb; + /* Get last CB */ + last_desc = q->ring_addr + ((q->sw_ring_tail + + dequeued_cbs + cbs_in_tb - 1) + & q->sw_ring_wrap_mask); + /* Check if last CB in TB is ready to dequeue (and thus + * the whole TB) - checking sdone bit. If not return. + */ + atom_desc.atom_hdr = __atomic_load_n((uint64_t *)last_desc, + __ATOMIC_RELAXED); + if (!(atom_desc.rsp.val & ACC100_SDONE)) + return -1; + + /* Clearing status, it will be set based on response */ + op->status = 0; + + /* Read remaining CBs if exists */ + while (cb_idx < cbs_in_tb) { + desc = q->ring_addr + ((q->sw_ring_tail + dequeued_cbs) + & q->sw_ring_wrap_mask); + atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc, + __ATOMIC_RELAXED); + rsp.val = atom_desc.rsp.val; + rte_bbdev_log_debug("Resp. desc %p: %x", desc, + rsp.val); + + op->status |= ((rsp.input_err) + ? (1 << RTE_BBDEV_DATA_ERROR) : 0); + op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0); + op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0); + + /* CRC invalid if error exists */ + if (!op->status) + op->status |= rsp.crc_status << RTE_BBDEV_CRC_ERROR; + op->turbo_dec.iter_count = RTE_MAX((uint8_t) rsp.iter_cnt, + op->turbo_dec.iter_count); + + /* Check if this is the last desc in batch (Atomic Queue) */ + if (desc->req.last_desc_in_batch) { + (*aq_dequeued)++; + desc->req.last_desc_in_batch = 0; + } + desc->rsp.val = ACC100_DMA_DESC_TYPE; + desc->rsp.add_info_0 = 0; + desc->rsp.add_info_1 = 0; + dequeued_cbs++; + cb_idx++; + } + + *ref_op = op; + + return cb_idx; +} + +/* Dequeue LDPC encode operations from ACC100 device. */ +static uint16_t +acc100_dequeue_ldpc_enc(struct rte_bbdev_queue_data *q_data, + struct rte_bbdev_enc_op **ops, uint16_t num) +{ + struct acc100_queue *q = q_data->queue_private; + uint32_t avail = q->sw_ring_head - q->sw_ring_tail; + uint32_t aq_dequeued = 0; + uint16_t dequeue_num, i, dequeued_cbs = 0, dequeued_descs = 0; + int ret; + +#ifdef RTE_LIBRTE_BBDEV_DEBUG + if (unlikely(ops == 0 && q == NULL)) + return 0; +#endif + + dequeue_num = (avail < num) ? avail : num; + + for (i = 0; i < dequeue_num; i++) { + ret = dequeue_enc_one_op_cb(q, &ops[dequeued_cbs], + dequeued_descs, &aq_dequeued); + if (ret < 0) + break; + dequeued_cbs += ret; + dequeued_descs++; + if (dequeued_cbs >= num) + break; + } + + q->aq_dequeued += aq_dequeued; + q->sw_ring_tail += dequeued_descs; + + /* Update enqueue stats */ + q_data->queue_stats.dequeued_count += dequeued_cbs; + + return dequeued_cbs; +} + +/* Dequeue decode operations from ACC100 device. */ +static uint16_t +acc100_dequeue_ldpc_dec(struct rte_bbdev_queue_data *q_data, + struct rte_bbdev_dec_op **ops, uint16_t num) +{ + struct acc100_queue *q = q_data->queue_private; + uint16_t dequeue_num; + uint32_t avail = q->sw_ring_head - q->sw_ring_tail; + uint32_t aq_dequeued = 0; + uint16_t i; + uint16_t dequeued_cbs = 0; + struct rte_bbdev_dec_op *op; + int ret; + +#ifdef RTE_LIBRTE_BBDEV_DEBUG + if (unlikely(ops == 0 && q == NULL)) + return 0; +#endif + + dequeue_num = (avail < num) ? avail : num; + + for (i = 0; i < dequeue_num; ++i) { + op = (q->ring_addr + ((q->sw_ring_tail + dequeued_cbs) + & q->sw_ring_wrap_mask))->req.op_addr; + if (op->ldpc_dec.code_block_mode == 0) + ret = dequeue_dec_one_op_tb(q, &ops[i], dequeued_cbs, + &aq_dequeued); + else + ret = dequeue_ldpc_dec_one_op_cb( + q_data, q, &ops[i], dequeued_cbs, + &aq_dequeued); + + if (ret < 0) + break; + dequeued_cbs += ret; + } + + q->aq_dequeued += aq_dequeued; + q->sw_ring_tail += dequeued_cbs; + + /* Update enqueue stats */ + q_data->queue_stats.dequeued_count += i; + + return i; +} + /* Initialization Function */ static void acc100_bbdev_init(struct rte_bbdev *dev, struct rte_pci_driver *drv) @@ -703,6 +2321,10 @@ struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(dev->device); dev->dev_ops = &acc100_bbdev_ops; + dev->enqueue_ldpc_enc_ops = acc100_enqueue_ldpc_enc; + dev->enqueue_ldpc_dec_ops = acc100_enqueue_ldpc_dec; + dev->dequeue_ldpc_enc_ops = acc100_dequeue_ldpc_enc; + dev->dequeue_ldpc_dec_ops = acc100_dequeue_ldpc_dec; ((struct acc100_device *) dev->data->dev_private)->pf_device = !strcmp(drv->driver.name, @@ -815,4 +2437,3 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev) RTE_PMD_REGISTER_PCI_TABLE(ACC100PF_DRIVER_NAME, pci_id_acc100_pf_map); RTE_PMD_REGISTER_PCI(ACC100VF_DRIVER_NAME, acc100_pci_vf_driver); RTE_PMD_REGISTER_PCI_TABLE(ACC100VF_DRIVER_NAME, pci_id_acc100_vf_map); - diff --git a/drivers/baseband/acc100/rte_acc100_pmd.h b/drivers/baseband/acc100/rte_acc100_pmd.h index 0e2b79c..78686c1 100644 --- a/drivers/baseband/acc100/rte_acc100_pmd.h +++ b/drivers/baseband/acc100/rte_acc100_pmd.h @@ -88,6 +88,8 @@ #define TMPL_PRI_3 0x0f0e0d0c #define QUEUE_ENABLE 0x80000000 /* Bit to mark Queue as Enabled */ #define WORDS_IN_ARAM_SIZE (128 * 1024 / 4) +#define ACC100_FDONE 0x80000000 +#define ACC100_SDONE 0x40000000 #define ACC100_NUM_TMPL 32 #define VF_OFFSET_QOS 16 /* offset in Memory Space specific to QoS Mon */ @@ -398,6 +400,7 @@ struct __rte_packed acc100_dma_req_desc { union acc100_dma_desc { struct acc100_dma_req_desc req; union acc100_dma_rsp_desc rsp; + uint64_t atom_hdr; }; -- 1.8.3.1