From: Andrew Rybchenko <arybchenko@solarflare.com>
To: Harry van Haaren <harry.van.haaren@intel.com>,
Ori Kam <orika@nvidia.com>,
Bruce Richardson <bruce.richardson@intel.com>,
Radu Nicolau <radu.nicolau@intel.com>,
Akhil Goyal <akhil.goyal@nxp.com>,
Ferruh Yigit <ferruh.yigit@intel.com>,
Sunil Kumar Kori <skori@marvell.com>,
"Pavan Nikhilesh" <pbhagavatula@marvell.com>,
Jerin Jacob <jerinj@marvell.com>,
Kiran Kumar K <kirankumark@marvell.com>,
Nithin Dabilpuram <ndabilpuram@marvell.com>,
David Hunt <david.hunt@intel.com>
Cc: <dev@dpdk.org>, Ivan Ilchenko <Ivan.Ilchenko@oktetlabs.ru>
Subject: [dpdk-dev] [PATCH 04/11] examples: check eth dev stop status
Date: Wed, 14 Oct 2020 14:28:59 +0100 [thread overview]
Message-ID: <1602682146-4722-5-git-send-email-arybchenko@solarflare.com> (raw)
In-Reply-To: <1602682146-4722-1-git-send-email-arybchenko@solarflare.com>
From: Ivan Ilchenko <Ivan.Ilchenko@oktetlabs.ru>
rte_eth_dev_stop() return value was changed from void to int,
so this patch modify usage of this function across examples
according to new return type.
Signed-off-by: Ivan Ilchenko <Ivan.Ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
examples/ethtool/lib/rte_ethtool.c | 17 ++++++++++-------
examples/eventdev_pipeline/main.c | 3 ++-
examples/flow_filtering/main.c | 12 +++++++-----
examples/ioat/ioatfwd.c | 5 ++++-
examples/ipsec-secgw/event_helper.c | 7 ++++++-
examples/ipsec-secgw/ipsec-secgw.c | 6 +++++-
examples/kni/main.c | 28 +++++++++++++++++++++++-----
examples/l2fwd-event/main.c | 10 ++++++++--
examples/l2fwd/main.c | 5 ++++-
examples/l3fwd-graph/main.c | 6 +++++-
examples/l3fwd-power/main.c | 6 +++++-
examples/l3fwd/main.c | 10 ++++++++--
12 files changed, 87 insertions(+), 28 deletions(-)
diff --git a/examples/ethtool/lib/rte_ethtool.c b/examples/ethtool/lib/rte_ethtool.c
index db8150efd5..78321b32ee 100644
--- a/examples/ethtool/lib/rte_ethtool.c
+++ b/examples/ethtool/lib/rte_ethtool.c
@@ -297,7 +297,11 @@ rte_ethtool_set_pauseparam(uint16_t port_id,
int
rte_ethtool_net_open(uint16_t port_id)
{
- rte_eth_dev_stop(port_id);
+ int ret;
+
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0)
+ return ret;
return rte_eth_dev_start(port_id);
}
@@ -305,10 +309,7 @@ rte_ethtool_net_open(uint16_t port_id)
int
rte_ethtool_net_stop(uint16_t port_id)
{
- RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
- rte_eth_dev_stop(port_id);
-
- return 0;
+ return rte_eth_dev_stop(port_id);
}
int
@@ -450,7 +451,7 @@ rte_ethtool_set_ringparam(uint16_t port_id,
struct ethtool_ringparam *ring_param)
{
struct rte_eth_rxq_info rx_qinfo;
- int stat;
+ int stat, ret;
if (ring_param == NULL)
return -EINVAL;
@@ -459,7 +460,9 @@ rte_ethtool_set_ringparam(uint16_t port_id,
if (stat != 0)
return stat;
- rte_eth_dev_stop(port_id);
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0)
+ return ret;
stat = rte_eth_tx_queue_setup(port_id, 0, ring_param->tx_pending,
rte_socket_id(), NULL);
diff --git a/examples/eventdev_pipeline/main.c b/examples/eventdev_pipeline/main.c
index 4ac5821539..597540c3d6 100644
--- a/examples/eventdev_pipeline/main.c
+++ b/examples/eventdev_pipeline/main.c
@@ -296,7 +296,8 @@ signal_handler(int signum)
RTE_ETH_FOREACH_DEV(portid) {
rte_event_eth_rx_adapter_stop(portid);
rte_event_eth_tx_adapter_stop(portid);
- rte_eth_dev_stop(portid);
+ if (rte_eth_dev_stop(portid) < 0)
+ printf("Failed to stop port %u", portid);
}
rte_eal_mp_wait_lcore();
diff --git a/examples/flow_filtering/main.c b/examples/flow_filtering/main.c
index cc9e7e7808..a92a4aa04e 100644
--- a/examples/flow_filtering/main.c
+++ b/examples/flow_filtering/main.c
@@ -52,7 +52,7 @@ print_ether_addr(const char *what, struct rte_ether_addr *eth_addr)
printf("%s%s", what, buf);
}
-static void
+static int
main_loop(void)
{
struct rte_mbuf *mbufs[32];
@@ -61,6 +61,7 @@ main_loop(void)
uint16_t nb_rx;
uint16_t i;
uint16_t j;
+ int ret;
while (!force_quit) {
for (i = 0; i < nr_queues; i++) {
@@ -88,8 +89,11 @@ main_loop(void)
/* closing and releasing resources */
rte_flow_flush(port_id, &error);
- rte_eth_dev_stop(port_id);
+ ret = rte_eth_dev_stop(port_id);
+ if (ret < 0)
+ printf("Failed to stop port %u", port_id);
rte_eth_dev_close(port_id);
+ return ret;
}
#define CHECK_INTERVAL 1000 /* 100ms */
@@ -254,7 +258,5 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE, "error in creating flow");
}
- main_loop();
-
- return 0;
+ return main_loop();
}
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 8cf606e25b..73edb5da27 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -995,7 +995,10 @@ main(int argc, char **argv)
uint32_t j;
for (i = 0; i < cfg.nb_ports; i++) {
printf("Closing port %d\n", cfg.ports[i].rxtx_port);
- rte_eth_dev_stop(cfg.ports[i].rxtx_port);
+ ret = rte_eth_dev_stop(cfg.ports[i].rxtx_port);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE, "rte_eth_dev_stop: err=%s, port=%d\n",
+ rte_strerror(-ret), cfg.ports[i].rxtx_port);
rte_eth_dev_close(cfg.ports[i].rxtx_port);
if (copy_mode == COPY_MODE_IOAT_NUM) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
diff --git a/examples/ipsec-secgw/event_helper.c b/examples/ipsec-secgw/event_helper.c
index 865dc911b8..ce4dbdc085 100644
--- a/examples/ipsec-secgw/event_helper.c
+++ b/examples/ipsec-secgw/event_helper.c
@@ -1583,7 +1583,12 @@ eh_devs_init(struct eh_conf *conf)
if ((conf->eth_portmask & (1 << port_id)) == 0)
continue;
- rte_eth_dev_stop(port_id);
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0) {
+ EH_LOG_ERR("Failed to stop port %u, err: %d",
+ port_id, ret);
+ return ret;
+ }
}
/* Setup eventdev */
diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
index 60132c4bd7..d83d9d8d5d 100644
--- a/examples/ipsec-secgw/ipsec-secgw.c
+++ b/examples/ipsec-secgw/ipsec-secgw.c
@@ -3032,7 +3032,11 @@ main(int32_t argc, char **argv)
" for port %u, err msg: %s\n", portid,
err.message);
}
- rte_eth_dev_stop(portid);
+ ret = rte_eth_dev_stop(portid);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE, "rte_eth_dev_stop: err=%s, port=%d\n",
+ rte_strerror(-ret), portid);
+
rte_eth_dev_close(portid);
printf(" Done\n");
}
diff --git a/examples/kni/main.c b/examples/kni/main.c
index 2223bd367d..4998111d2c 100644
--- a/examples/kni/main.c
+++ b/examples/kni/main.c
@@ -782,7 +782,11 @@ kni_change_mtu_(uint16_t port_id, unsigned int new_mtu)
RTE_LOG(INFO, APP, "Change MTU of port %d to %u\n", port_id, new_mtu);
/* Stop specific port */
- rte_eth_dev_stop(port_id);
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0) {
+ RTE_LOG(ERR, APP, "Failed to stop port %d\n", port_id);
+ return ret;
+ }
memcpy(&conf, &port_conf, sizeof(conf));
/* Set new MTU */
@@ -875,10 +879,19 @@ kni_config_network_interface(uint16_t port_id, uint8_t if_up)
rte_atomic32_inc(&kni_pause);
if (if_up != 0) { /* Configure network interface up */
- rte_eth_dev_stop(port_id);
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0) {
+ RTE_LOG(ERR, APP, "Failed to stop port %d\n", port_id);
+ return ret;
+ }
ret = rte_eth_dev_start(port_id);
- } else /* Configure network interface down */
- rte_eth_dev_stop(port_id);
+ } else { /* Configure network interface down */
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0) {
+ RTE_LOG(ERR, APP, "Failed to stop port %d\n", port_id);
+ return ret;
+ }
+ }
rte_atomic32_dec(&kni_pause);
@@ -998,6 +1011,7 @@ static int
kni_free_kni(uint16_t port_id)
{
uint8_t i;
+ int ret;
struct kni_port_params **p = kni_port_params_array;
if (port_id >= RTE_MAX_ETHPORTS || !p[port_id])
@@ -1008,7 +1022,11 @@ kni_free_kni(uint16_t port_id)
printf("Fail to release kni\n");
p[port_id]->kni[i] = NULL;
}
- rte_eth_dev_stop(port_id);
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0) {
+ RTE_LOG(ERR, APP, "Failed to stop port %d\n", port_id);
+ return ret;
+ }
return 0;
}
diff --git a/examples/l2fwd-event/main.c b/examples/l2fwd-event/main.c
index 9f831b1266..ed60240083 100644
--- a/examples/l2fwd-event/main.c
+++ b/examples/l2fwd-event/main.c
@@ -683,7 +683,10 @@ main(int argc, char **argv)
if ((rsrc->enabled_port_mask &
(1 << port_id)) == 0)
continue;
- rte_eth_dev_stop(port_id);
+ ret = rte_eth_dev_stop(port_id);
+ if (ret < 0)
+ rte_panic("rte_eth_dev_stop:err=%d, port=%u\n",
+ ret, port_id);
}
rte_eal_mp_wait_lcore();
@@ -705,7 +708,10 @@ main(int argc, char **argv)
(1 << port_id)) == 0)
continue;
printf("Closing port %d...", port_id);
- rte_eth_dev_stop(port_id);
+ ret = rte_eth_dev_stop(port_id);
+ if (ret < 0)
+ rte_panic("rte_eth_dev_stop:err=%d, port=%u\n",
+ ret, port_id);
rte_eth_dev_close(port_id);
printf(" Done\n");
}
diff --git a/examples/l2fwd/main.c b/examples/l2fwd/main.c
index 7e3078788e..8d6c7ec237 100644
--- a/examples/l2fwd/main.c
+++ b/examples/l2fwd/main.c
@@ -896,7 +896,10 @@ main(int argc, char **argv)
if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
continue;
printf("Closing port %d...", portid);
- rte_eth_dev_stop(portid);
+ ret = rte_eth_dev_stop(portid);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE, "rte_eth_dev_stop: err=%d, port=%d\n",
+ ret, portid);
rte_eth_dev_close(portid);
printf(" Done\n");
}
diff --git a/examples/l3fwd-graph/main.c b/examples/l3fwd-graph/main.c
index 2306ba9b07..fbe680aa5d 100644
--- a/examples/l3fwd-graph/main.c
+++ b/examples/l3fwd-graph/main.c
@@ -1116,7 +1116,11 @@ main(int argc, char **argv)
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
printf("Closing port %d...", portid);
- rte_eth_dev_stop(portid);
+ ret = rte_eth_dev_stop(portid);
+ if (ret != 0) {
+ printf("Failed to stop port %u: %s\n",
+ portid, rte_strerror(-ret));
+ }
rte_eth_dev_close(portid);
printf(" Done\n");
}
diff --git a/examples/l3fwd-power/main.c b/examples/l3fwd-power/main.c
index d0e6c9bd77..b1535b2749 100644
--- a/examples/l3fwd-power/main.c
+++ b/examples/l3fwd-power/main.c
@@ -2805,7 +2805,11 @@ main(int argc, char **argv)
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
- rte_eth_dev_stop(portid);
+ ret = rte_eth_dev_stop(portid);
+ if (ret != 0)
+ RTE_LOG(ERR, L3FWD_POWER, "rte_eth_dev_stop: err=%d, port=%u\n",
+ ret, portid);
+
rte_eth_dev_close(portid);
}
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 80f3434ec2..9094cbc4e2 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -1284,7 +1284,10 @@ main(int argc, char **argv)
RTE_ETH_FOREACH_DEV(portid) {
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
- rte_eth_dev_stop(portid);
+ ret = rte_eth_dev_stop(portid);
+ if (ret != 0)
+ printf("rte_eth_dev_stop: err=%d, port=%u\n",
+ ret, portid);
}
rte_eal_mp_wait_lcore();
@@ -1304,7 +1307,10 @@ main(int argc, char **argv)
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
printf("Closing port %d...", portid);
- rte_eth_dev_stop(portid);
+ ret = rte_eth_dev_stop(portid);
+ if (ret != 0)
+ printf("rte_eth_dev_stop: err=%d, port=%u\n",
+ ret, portid);
rte_eth_dev_close(portid);
printf(" Done\n");
}
--
2.17.1
next prev parent reply other threads:[~2020-10-14 13:30 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-14 13:28 [dpdk-dev] [PATCH 00/11] ethdev: change device stop to return status Andrew Rybchenko
2020-10-14 13:28 ` [dpdk-dev] [PATCH 01/11] ethdev: change eth dev stop function to return int Andrew Rybchenko
2020-10-14 13:33 ` Thomas Monjalon
2020-10-14 13:40 ` Andrew Rybchenko
2020-10-14 17:29 ` Ferruh Yigit
2020-10-14 13:28 ` [dpdk-dev] [PATCH 02/11] test/event: check eth dev stop status Andrew Rybchenko
2020-10-14 13:28 ` [dpdk-dev] [PATCH 03/11] app: " Andrew Rybchenko
2020-10-14 17:34 ` Ferruh Yigit
2020-10-14 13:28 ` Andrew Rybchenko [this message]
2020-10-14 17:38 ` [dpdk-dev] [PATCH 04/11] examples: " Ferruh Yigit
2020-10-14 13:29 ` [dpdk-dev] [PATCH 05/11] net/bonding: " Andrew Rybchenko
2020-10-14 17:45 ` Ferruh Yigit
2020-10-14 13:29 ` [dpdk-dev] [PATCH 06/11] kni: " Andrew Rybchenko
2020-10-14 13:29 ` [dpdk-dev] [PATCH 07/11] test/bonding: " Andrew Rybchenko
2020-10-14 13:29 ` [dpdk-dev] [PATCH 08/11] app/flow-perf: " Andrew Rybchenko
2020-10-15 8:04 ` Wisam Monther
2020-10-14 13:29 ` [dpdk-dev] [PATCH 09/11] app/testpmd: " Andrew Rybchenko
2020-10-14 13:29 ` [dpdk-dev] [PATCH 10/11] net/failsafe: " Andrew Rybchenko
2020-10-15 10:37 ` [dpdk-dev] [PATCH v2] " Gaetan Rivet
2020-10-14 13:29 ` [dpdk-dev] [PATCH 11/11] ethdev: change stop device callback to return int Andrew Rybchenko
2020-10-14 18:08 ` Ferruh Yigit
2020-10-15 10:40 ` Gaëtan Rivet
2020-10-15 13:30 ` [dpdk-dev] [PATCH v2 00/11] ethdev: change device stop to return status Andrew Rybchenko
2020-10-15 13:30 ` [dpdk-dev] [PATCH v2 01/11] ethdev: change eth dev stop function to return int Andrew Rybchenko
2020-10-16 9:22 ` Ferruh Yigit
2020-10-16 11:20 ` Kinsella, Ray
2020-10-16 17:13 ` Andrew Rybchenko
2020-10-19 9:37 ` Kinsella, Ray
2020-10-16 16:20 ` Ferruh Yigit
2020-10-15 13:30 ` [dpdk-dev] [PATCH v2 02/11] test/event: check eth dev stop status Andrew Rybchenko
2020-10-15 13:30 ` [dpdk-dev] [PATCH v2 03/11] app: " Andrew Rybchenko
2020-10-16 1:28 ` Min Hu (Connor)
2020-10-15 13:30 ` [dpdk-dev] [PATCH v2 04/11] examples: " Andrew Rybchenko
2020-10-15 13:30 ` [dpdk-dev] [PATCH v2 05/11] net/bonding: " Andrew Rybchenko
2020-10-15 13:30 ` [dpdk-dev] [PATCH v2 06/11] kni: " Andrew Rybchenko
2020-10-15 13:30 ` [dpdk-dev] [PATCH v2 07/11] test/bonding: " Andrew Rybchenko
2020-10-15 13:30 ` [dpdk-dev] [PATCH v2 08/11] app/flow-perf: " Andrew Rybchenko
2020-10-15 13:30 ` [dpdk-dev] [PATCH v2 09/11] app/testpmd: " Andrew Rybchenko
2020-10-15 13:30 ` [dpdk-dev] [PATCH v2 10/11] net/failsafe: " Andrew Rybchenko
2020-10-15 13:30 ` [dpdk-dev] [PATCH v2 11/11] ethdev: change stop device callback to return int Andrew Rybchenko
2020-10-16 18:37 ` Ferruh Yigit
2020-10-18 8:55 ` Xu, Rosen
2020-10-16 18:54 ` [dpdk-dev] [PATCH v2 00/11] ethdev: change device stop to return status Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1602682146-4722-5-git-send-email-arybchenko@solarflare.com \
--to=arybchenko@solarflare.com \
--cc=Ivan.Ilchenko@oktetlabs.ru \
--cc=akhil.goyal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=david.hunt@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=harry.van.haaren@intel.com \
--cc=jerinj@marvell.com \
--cc=kirankumark@marvell.com \
--cc=ndabilpuram@marvell.com \
--cc=orika@nvidia.com \
--cc=pbhagavatula@marvell.com \
--cc=radu.nicolau@intel.com \
--cc=skori@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).