DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] net/mlx5: fix eCPRI previous layer checking
@ 2020-11-03  5:42 Bing Zhao
  2020-11-05 15:02 ` Raslan Darawsheh
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Bing Zhao @ 2020-11-03  5:42 UTC (permalink / raw)
  To: viacheslavo, matan; +Cc: dev, orika, rasland, stable

Based on the specification, eCPRI can only follow ETH (VLAN) layer
or UDP layer. When creating a flow with eCPRI item, this should be
checked and invalid layout of the layers should be rejected.

Fixes: c7eca23657b7 ("net/mlx5: add flow validation of eCPRI header")

Cc: stable@dpdk.org

Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
---
 drivers/net/mlx5/mlx5_flow.c | 29 ++++++++++++++++++-----------
 1 file changed, 18 insertions(+), 11 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index a6e60af..11dba3b 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -2896,17 +2896,23 @@ struct mlx5_flow_tunnel_info {
 					MLX5_FLOW_LAYER_OUTER_VLAN);
 	struct rte_flow_item_ecpri mask_lo;
 
+	if (!(last_item & outer_l2_vlan) &&
+	    last_item != MLX5_FLOW_LAYER_OUTER_L4_UDP)
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ITEM, item,
+					  "eCPRI can only follow L2/VLAN layer"
+					  " or UDP layer.");
 	if ((last_item & outer_l2_vlan) && ether_type &&
 	    ether_type != RTE_ETHER_TYPE_ECPRI)
 		return rte_flow_error_set(error, EINVAL,
 					  RTE_FLOW_ERROR_TYPE_ITEM, item,
-					  "eCPRI cannot follow L2/VLAN layer "
-					  "which ether type is not 0xAEFE.");
+					  "eCPRI cannot follow L2/VLAN layer"
+					  " which ether type is not 0xAEFE.");
 	if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
 		return rte_flow_error_set(error, EINVAL,
 					  RTE_FLOW_ERROR_TYPE_ITEM, item,
-					  "eCPRI with tunnel is not supported "
-					  "right now.");
+					  "eCPRI with tunnel is not supported"
+					  " right now.");
 	if (item_flags & MLX5_FLOW_LAYER_OUTER_L3)
 		return rte_flow_error_set(error, ENOTSUP,
 					  RTE_FLOW_ERROR_TYPE_ITEM, item,
@@ -2914,13 +2920,14 @@ struct mlx5_flow_tunnel_info {
 	else if (item_flags & MLX5_FLOW_LAYER_OUTER_L4_TCP)
 		return rte_flow_error_set(error, EINVAL,
 					  RTE_FLOW_ERROR_TYPE_ITEM, item,
-					  "eCPRI cannot follow a TCP layer.");
+					  "eCPRI cannot coexist with a"
+					  " TCP layer.");
 	/* In specification, eCPRI could be over UDP layer. */
 	else if (item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP)
 		return rte_flow_error_set(error, EINVAL,
 					  RTE_FLOW_ERROR_TYPE_ITEM, item,
-					  "eCPRI over UDP layer is not yet "
-					  "supported right now.");
+					  "eCPRI over UDP layer is not yet"
+					  " supported right now.");
 	/* Mask for type field in common header could be zero. */
 	if (!mask)
 		mask = &rte_flow_item_ecpri_mask;
@@ -2929,13 +2936,13 @@ struct mlx5_flow_tunnel_info {
 	if (mask_lo.hdr.common.type != 0 && mask_lo.hdr.common.type != 0xff)
 		return rte_flow_error_set(error, EINVAL,
 					  RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
-					  "partial mask is not supported "
-					  "for protocol");
+					  "partial mask is not supported"
+					  " for protocol");
 	else if (mask_lo.hdr.common.type == 0 && mask->hdr.dummy[0] != 0)
 		return rte_flow_error_set(error, EINVAL,
 					  RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
-					  "message header mask must be after "
-					  "a type mask");
+					  "message header mask must be after"
+					  " a type mask");
 	return mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
 					 acc_mask ? (const uint8_t *)acc_mask
 						  : (const uint8_t *)&nic_mask,
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2020-11-13 18:08 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-03  5:42 [dpdk-dev] [PATCH] net/mlx5: fix eCPRI previous layer checking Bing Zhao
2020-11-05 15:02 ` Raslan Darawsheh
2020-11-06 11:34 ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit
2020-11-06 14:20   ` Bing Zhao
2020-11-06 17:43     ` Ferruh Yigit
2020-11-11  9:28 ` [dpdk-dev] [PATCH v2] " Bing Zhao
2020-11-13 18:08   ` [dpdk-dev] [dpdk-stable] " Thomas Monjalon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).