DPDK patches and discussions
 help / color / mirror / Atom feed
From: Lijun Ou <oulijun@huawei.com>
To: <ferruh.yigit@intel.com>
Cc: <dev@dpdk.org>, <linuxarm@huawei.com>
Subject: [dpdk-dev] [PATCH V3 6/6] net/hns3: remove some unnecessary blank lines
Date: Mon, 9 Nov 2020 22:29:02 +0800
Message-ID: <1604932142-19900-7-git-send-email-oulijun@huawei.com> (raw)
In-Reply-To: <1604932142-19900-1-git-send-email-oulijun@huawei.com>

According to the rule of the static check tools
that arrange blank lines properly to keep the
code compact, here remove some unncessary blank
line to fix the above rule warning.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
---
 drivers/net/hns3/hns3_cmd.c    |  1 -
 drivers/net/hns3/hns3_ethdev.c |  6 +-----
 drivers/net/hns3/hns3_flow.c   | 37 ++++++++++++++-----------------------
 drivers/net/hns3/hns3_rxtx.c   |  1 -
 drivers/net/hns3/hns3_stats.c  |  1 -
 5 files changed, 15 insertions(+), 31 deletions(-)

diff --git a/drivers/net/hns3/hns3_cmd.c b/drivers/net/hns3/hns3_cmd.c
index 4f52ed0..f58f4f7 100644
--- a/drivers/net/hns3/hns3_cmd.c
+++ b/drivers/net/hns3/hns3_cmd.c
@@ -198,7 +198,6 @@ hns3_cmd_csq_clean(struct hns3_hw *hw)
 	int clean;
 
 	head = hns3_read_dev(hw, HNS3_CMDQ_TX_HEAD_REG);
-
 	if (!is_valid_csq_clean_head(csq, head)) {
 		hns3_err(hw, "wrong cmd head (%u, %u-%u)", head,
 			    csq->next_to_use, csq->next_to_clean);
diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 79c0389..2011378 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -238,7 +238,6 @@ hns3_interrupt_handler(void *param)
 	hns3_pf_disable_irq0(hw);
 
 	event_cause = hns3_check_event_cause(hns, &clearval);
-
 	/* vector 0 interrupt is shared with reset and mailbox source events. */
 	if (event_cause == HNS3_VECTOR0_EVENT_ERR) {
 		hns3_warn(hw, "Received err interrupt");
@@ -3556,9 +3555,7 @@ hns3_drop_pfc_buf_till_fit(struct hns3_hw *hw,
 	for (i = HNS3_MAX_TC_NUM - 1; i >= 0; i--) {
 		priv = &buf_alloc->priv_buf[i];
 		mask = BIT((uint8_t)i);
-
-		if (hw->hw_tc_map & mask &&
-		    hw->dcb_info.hw_pfc_map & mask) {
+		if (hw->hw_tc_map & mask && hw->dcb_info.hw_pfc_map & mask) {
 			/* Reduce the number of pfc TC with private buffer */
 			priv->wl.low = 0;
 			priv->enable = 0;
@@ -3612,7 +3609,6 @@ hns3_only_alloc_priv_buff(struct hns3_hw *hw,
 
 	for (i = 0; i < HNS3_MAX_TC_NUM; i++) {
 		priv = &buf_alloc->priv_buf[i];
-
 		priv->enable = 0;
 		priv->wl.low = 0;
 		priv->wl.high = 0;
diff --git a/drivers/net/hns3/hns3_flow.c b/drivers/net/hns3/hns3_flow.c
index 2fff157..ee6ec15 100644
--- a/drivers/net/hns3/hns3_flow.c
+++ b/drivers/net/hns3/hns3_flow.c
@@ -209,8 +209,7 @@ hns3_counter_query(struct rte_eth_dev *dev, struct rte_flow *flow,
 
 	ret = hns3_get_count(&hns->hw, flow->counter_id, &value);
 	if (ret) {
-		rte_flow_error_set(error, -ret,
-				   RTE_FLOW_ERROR_TYPE_HANDLE,
+		rte_flow_error_set(error, -ret, RTE_FLOW_ERROR_TYPE_HANDLE,
 				   NULL, "Read counter fail.");
 		return ret;
 	}
@@ -547,7 +546,6 @@ hns3_parse_ipv4(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
 
 	if (item->mask) {
 		ipv4_mask = item->mask;
-
 		if (ipv4_mask->hdr.total_length ||
 		    ipv4_mask->hdr.packet_id ||
 		    ipv4_mask->hdr.fragment_offset ||
@@ -616,8 +614,8 @@ hns3_parse_ipv6(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
 
 	if (item->mask) {
 		ipv6_mask = item->mask;
-		if (ipv6_mask->hdr.vtc_flow ||
-		    ipv6_mask->hdr.payload_len || ipv6_mask->hdr.hop_limits) {
+		if (ipv6_mask->hdr.vtc_flow || ipv6_mask->hdr.payload_len ||
+		    ipv6_mask->hdr.hop_limits) {
 			return rte_flow_error_set(error, EINVAL,
 						  RTE_FLOW_ERROR_TYPE_ITEM_MASK,
 						  item,
@@ -672,12 +670,10 @@ hns3_parse_tcp(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
 
 	if (item->mask) {
 		tcp_mask = item->mask;
-		if (tcp_mask->hdr.sent_seq ||
-		    tcp_mask->hdr.recv_ack ||
-		    tcp_mask->hdr.data_off ||
-		    tcp_mask->hdr.tcp_flags ||
-		    tcp_mask->hdr.rx_win ||
-		    tcp_mask->hdr.cksum || tcp_mask->hdr.tcp_urp) {
+		if (tcp_mask->hdr.sent_seq || tcp_mask->hdr.recv_ack ||
+		    tcp_mask->hdr.data_off || tcp_mask->hdr.tcp_flags ||
+		    tcp_mask->hdr.rx_win || tcp_mask->hdr.cksum ||
+		    tcp_mask->hdr.tcp_urp) {
 			return rte_flow_error_set(error, EINVAL,
 						  RTE_FLOW_ERROR_TYPE_ITEM_MASK,
 						  item,
@@ -776,7 +772,6 @@ hns3_parse_sctp(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
 						  RTE_FLOW_ERROR_TYPE_ITEM_MASK,
 						  item,
 						  "Only support src & dst port in SCTP");
-
 		if (sctp_mask->hdr.src_port) {
 			hns3_set_bit(rule->input_set, INNER_SRC_PORT, 1);
 			rule->key_conf.mask.src_port =
@@ -1069,8 +1064,7 @@ hns3_parse_tunnel(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
 }
 
 static int
-hns3_parse_normal(const struct rte_flow_item *item,
-		  struct hns3_fdir_rule *rule,
+hns3_parse_normal(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
 		  struct items_step_mngr *step_mngr,
 		  struct rte_flow_error *error)
 {
@@ -1331,9 +1325,8 @@ hns3_rss_conf_copy(struct hns3_rss_conf *out,
 		.key_len = in->key_len,
 		.queue_num = in->queue_num,
 	};
-	out->conf.queue =
-		memcpy(out->queue, in->queue,
-		       sizeof(*in->queue) * in->queue_num);
+	out->conf.queue = memcpy(out->queue, in->queue,
+				sizeof(*in->queue) * in->queue_num);
 	if (in->key)
 		out->conf.key = memcpy(out->key, in->key, in->key_len);
 
@@ -1783,17 +1776,15 @@ hns3_flow_create(struct rte_eth_dev *dev, const struct rte_flow_attr *attr,
 
 	flow = rte_zmalloc("hns3 flow", sizeof(struct rte_flow), 0);
 	if (flow == NULL) {
-		rte_flow_error_set(error, ENOMEM,
-				   RTE_FLOW_ERROR_TYPE_HANDLE, NULL,
-				   "Failed to allocate flow memory");
+		rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
+				   NULL, "Failed to allocate flow memory");
 		return NULL;
 	}
 	flow_node = rte_zmalloc("hns3 flow node",
 				sizeof(struct hns3_flow_mem), 0);
 	if (flow_node == NULL) {
-		rte_flow_error_set(error, ENOMEM,
-				   RTE_FLOW_ERROR_TYPE_HANDLE, NULL,
-				   "Failed to allocate flow list memory");
+		rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
+				   NULL, "Failed to allocate flow list memory");
 		rte_free(flow);
 		return NULL;
 	}
diff --git a/drivers/net/hns3/hns3_rxtx.c b/drivers/net/hns3/hns3_rxtx.c
index 4b88b46..c76e635 100644
--- a/drivers/net/hns3/hns3_rxtx.c
+++ b/drivers/net/hns3/hns3_rxtx.c
@@ -1584,7 +1584,6 @@ hns3_rx_buf_len_calc(struct rte_mempool *mp, uint16_t *rx_buf_len)
 
 	vld_buf_size = (uint16_t)(rte_pktmbuf_data_room_size(mp) -
 			RTE_PKTMBUF_HEADROOM);
-
 	if (vld_buf_size < HNS3_MIN_BD_BUF_SIZE)
 		return -EINVAL;
 
diff --git a/drivers/net/hns3/hns3_stats.c b/drivers/net/hns3/hns3_stats.c
index c590647..91168ac 100644
--- a/drivers/net/hns3/hns3_stats.c
+++ b/drivers/net/hns3/hns3_stats.c
@@ -679,7 +679,6 @@ hns3_get_queue_stats(struct rte_eth_dev *dev, struct rte_eth_xstat *xstats,
 			(*count)++;
 		}
 	}
-
 }
 
 void
-- 
2.7.4


  parent reply	other threads:[~2020-11-09 14:30 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-05 14:23 [dpdk-dev] [PATCH 0/5] bugfix and cleanups for hns3 Lijun Ou
2020-11-05 14:23 ` [dpdk-dev] [PATCH 1/5] net/hns3: use correct logging format symbol Lijun Ou
2020-11-05 14:23 ` [dpdk-dev] [PATCH 2/5] net/hns3: use unsigned types for bit operator Lijun Ou
2020-11-05 14:23 ` [dpdk-dev] [PATCH 3/5] net/hns3: adjust some code style Lijun Ou
2020-11-05 14:23 ` [dpdk-dev] [PATCH 4/5] net/hns3: check PCI config space writes Lijun Ou
2020-11-05 14:23 ` [dpdk-dev] [PATCH 5/5] net/hns3: fix queue enabling status not store after FLR Lijun Ou
2020-11-06  3:51 ` [dpdk-dev] [PATCH v2 0/5] bugfix and cleanups for hns3 Lijun Ou
2020-11-06  3:51   ` [dpdk-dev] [PATCH v2 1/5] net/hns3: use correct logging format symbol Lijun Ou
2020-11-06  3:51   ` [dpdk-dev] [PATCH v2 2/5] net/hns3: use unsigned types for bit operator Lijun Ou
2020-11-06 16:38     ` Ferruh Yigit
2020-11-09  9:21       ` oulijun
2020-11-09  9:28       ` oulijun
2020-11-06  3:51   ` [dpdk-dev] [PATCH v2 3/5] net/hns3: adjust some code style Lijun Ou
2020-11-06 16:44     ` Ferruh Yigit
2020-11-09  9:32       ` oulijun
2020-11-09 10:51         ` Ferruh Yigit
2020-11-06  3:51   ` [dpdk-dev] [PATCH v2 4/5] net/hns3: check PCI config space writes Lijun Ou
2020-11-06 16:45     ` Ferruh Yigit
2020-11-09 13:44       ` oulijun
2020-11-06  3:51   ` [dpdk-dev] [PATCH v2 5/5] net/hns3: fix queue enabling status not store after FLR Lijun Ou
2020-11-06 16:57     ` Ferruh Yigit
2020-11-09 14:27       ` oulijun
2020-11-09 14:28   ` [dpdk-dev] [PATCH V3 0/6] bugfix and cleanups for hns3 Lijun Ou
2020-11-09 14:28     ` [dpdk-dev] [PATCH V3 1/6] net/hns3: use correct logging format symbol Lijun Ou
2020-11-09 14:28     ` [dpdk-dev] [PATCH V3 2/6] net/hns3: use unsigned types for bit operator Lijun Ou
2020-11-09 14:28     ` [dpdk-dev] [PATCH V3 3/6] net/hns3: adjust code style for initial struct Lijun Ou
2020-11-09 14:29     ` [dpdk-dev] [PATCH V3 4/6] net/hns3: check PCI config space writes Lijun Ou
2020-11-09 14:29     ` [dpdk-dev] [PATCH V3 5/6] net/hns3: fix queue enabling state not store after FLR Lijun Ou
2020-11-09 14:29     ` Lijun Ou [this message]
2020-11-10 10:17     ` [dpdk-dev] [PATCH V3 0/6] bugfix and cleanups for hns3 Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1604932142-19900-7-git-send-email-oulijun@huawei.com \
    --to=oulijun@huawei.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=linuxarm@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git