DPDK patches and discussions
 help / color / mirror / Atom feed
From: Timothy McDaniel <timothy.mcdaniel@intel.com>
Cc: dev@dpdk.org, erik.g.carrillo@intel.com, gage.eads@intel.com,
	harry.van.haaren@intel.com, jerinj@marvell.com,
	thomas@monjalon.net, david.marchand@redhat.com
Subject: [dpdk-dev] [PATCH] event/dlb2: remove duplicate/unused PCI code and constants
Date: Wed, 11 Nov 2020 14:27:00 -0600	[thread overview]
Message-ID: <1605126422-522-2-git-send-email-timothy.mcdaniel@intel.com> (raw)
In-Reply-To: <1605126422-522-1-git-send-email-timothy.mcdaniel@intel.com>

Use rte_pci_find_ext_capability instead of private version,
Remove unused PCI offsets and values
Use PCI definitions from rte_pci.h, where available.

Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
---
 drivers/event/dlb2/pf/dlb2_main.c | 46 ++++++---------------------------------
 1 file changed, 7 insertions(+), 39 deletions(-)

diff --git a/drivers/event/dlb2/pf/dlb2_main.c b/drivers/event/dlb2/pf/dlb2_main.c
index 06b6aee..a9d407f 100644
--- a/drivers/event/dlb2/pf/dlb2_main.c
+++ b/drivers/event/dlb2/pf/dlb2_main.c
@@ -26,17 +26,10 @@
 #define NO_OWNER_VF 0	/* PF ONLY! */
 #define NOT_VF_REQ false /* PF ONLY! */
 
-#define DLB2_PCI_CFG_SPACE_SIZE 256
 #define DLB2_PCI_CAP_POINTER 0x34
 #define DLB2_PCI_CAP_NEXT(hdr) (((hdr) >> 8) & 0xFC)
 #define DLB2_PCI_CAP_ID(hdr) ((hdr) & 0xFF)
-#define DLB2_PCI_EXT_CAP_NEXT(hdr) (((hdr) >> 20) & 0xFFC)
-#define DLB2_PCI_EXT_CAP_ID(hdr) ((hdr) & 0xFFFF)
-#define DLB2_PCI_EXT_CAP_ID_ERR 1
-#define DLB2_PCI_ERR_UNCOR_MASK 8
-#define DLB2_PCI_ERR_UNC_UNSUP  0x00100000
 
-#define DLB2_PCI_EXP_DEVCTL 8
 #define DLB2_PCI_LNKCTL 16
 #define DLB2_PCI_SLTCTL 24
 #define DLB2_PCI_RTCTL 28
@@ -44,14 +37,12 @@
 #define DLB2_PCI_LNKCTL2 48
 #define DLB2_PCI_SLTCTL2 56
 #define DLB2_PCI_CMD 4
-#define DLB2_PCI_X_CMD 2
 #define DLB2_PCI_EXP_DEVSTA 10
 #define DLB2_PCI_EXP_DEVSTA_TRPND 0x20
 #define DLB2_PCI_EXP_DEVCTL_BCR_FLR 0x8000
 
 #define DLB2_PCI_CAP_ID_EXP       0x10
 #define DLB2_PCI_CAP_ID_MSIX      0x11
-#define DLB2_PCI_EXT_CAP_ID_PAS   0x1B
 #define DLB2_PCI_EXT_CAP_ID_PRI   0x13
 #define DLB2_PCI_EXT_CAP_ID_ACS   0xD
 
@@ -73,29 +64,6 @@
 #define DLB2_PCI_ACS_UF                  0x10
 #define DLB2_PCI_ACS_EC                  0x20
 
-static int
-dlb2_pci_find_ext_capability(struct rte_pci_device *pdev, uint32_t id)
-{
-	uint32_t hdr;
-	size_t sz;
-	int pos;
-
-	pos = DLB2_PCI_CFG_SPACE_SIZE;
-	sz = sizeof(hdr);
-
-	while (pos > 0xFF) {
-		if (rte_pci_read_config(pdev, &hdr, sz, pos) != (int)sz)
-			return -1;
-
-		if (DLB2_PCI_EXT_CAP_ID(hdr) == id)
-			return pos;
-
-		pos = DLB2_PCI_EXT_CAP_NEXT(hdr);
-	}
-
-	return -1;
-}
-
 static int dlb2_pci_find_capability(struct rte_pci_device *pdev, uint32_t id)
 {
 	uint8_t pos;
@@ -299,7 +267,7 @@ dlb2_pf_reset(struct dlb2_dev *dlb2_dev)
 		return pcie_cap_offset;
 	}
 
-	off = pcie_cap_offset + DLB2_PCI_EXP_DEVCTL;
+	off = pcie_cap_offset + RTE_PCI_EXP_DEVCTL;
 	if (rte_pci_read_config(pdev, &dev_ctl_word, 2, off) != 2)
 		dev_ctl_word = 0;
 
@@ -328,7 +296,7 @@ dlb2_pf_reset(struct dlb2_dev *dlb2_dev)
 		slt_word2 = 0;
 
 	off = DLB2_PCI_EXT_CAP_ID_PRI;
-	pri_cap_offset = dlb2_pci_find_ext_capability(pdev, off);
+	pri_cap_offset = rte_pci_find_ext_capability(pdev, off);
 
 	if (pri_cap_offset >= 0) {
 		off = pri_cap_offset + DLB2_PCI_PRI_ALLOC_REQ;
@@ -371,7 +339,7 @@ dlb2_pf_reset(struct dlb2_dev *dlb2_dev)
 		return -1;
 	}
 
-	off = pcie_cap_offset + DLB2_PCI_EXP_DEVCTL;
+	off = pcie_cap_offset + RTE_PCI_EXP_DEVCTL;
 	ret = rte_pci_read_config(pdev, &devctl_word, 2, off);
 	if (ret != 2) {
 		DLB2_LOG_ERR("[%s()] failed to read the pcie device control\n",
@@ -393,7 +361,7 @@ dlb2_pf_reset(struct dlb2_dev *dlb2_dev)
 	/* Restore PCI config state */
 
 	if (pcie_cap_offset >= 0) {
-		off = pcie_cap_offset + DLB2_PCI_EXP_DEVCTL;
+		off = pcie_cap_offset + RTE_PCI_EXP_DEVCTL;
 		ret = rte_pci_write_config(pdev, &dev_ctl_word, 2, off);
 		if (ret != 2) {
 			DLB2_LOG_ERR("[%s()] failed to write the pcie device control at offset %d\n",
@@ -470,8 +438,8 @@ dlb2_pf_reset(struct dlb2_dev *dlb2_dev)
 		}
 	}
 
-	off = DLB2_PCI_EXT_CAP_ID_ERR;
-	err_cap_offset = dlb2_pci_find_ext_capability(pdev, off);
+	off = RTE_PCI_EXT_CAP_ID_ERR;
+	err_cap_offset = rte_pci_find_ext_capability(pdev, off);
 
 	if (err_cap_offset >= 0) {
 		uint32_t tmp;
@@ -556,7 +524,7 @@ dlb2_pf_reset(struct dlb2_dev *dlb2_dev)
 	}
 
 	off = DLB2_PCI_EXT_CAP_ID_ACS;
-	acs_cap_offset = dlb2_pci_find_ext_capability(pdev, off);
+	acs_cap_offset = rte_pci_find_ext_capability(pdev, off);
 
 	if (acs_cap_offset >= 0) {
 		uint16_t acs_cap, acs_ctrl, acs_mask;
-- 
2.6.4


  reply	other threads:[~2020-11-11 20:25 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-11 20:26 [dpdk-dev] [PATCH] event/dlb2: add missing delayed token pop logic Timothy McDaniel
2020-11-11 20:27 ` Timothy McDaniel [this message]
2020-11-11 20:27 ` [dpdk-dev] [PATCH] event/dlb: do not free memzone if port create succeeds Timothy McDaniel
2020-11-11 21:04   ` Chen, Mike Ximing
2020-11-11 20:27 ` [dpdk-dev] [PATCH] event/dlb: remove duplicate/unused PCI code and constants Timothy McDaniel
2020-11-11 21:12 ` [dpdk-dev] [PATCH] event/dlb2: add missing delayed token pop logic Chen, Mike Ximing
2020-11-13  9:53   ` Jerin Jacob

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1605126422-522-2-git-send-email-timothy.mcdaniel@intel.com \
    --to=timothy.mcdaniel@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=erik.g.carrillo@intel.com \
    --cc=gage.eads@intel.com \
    --cc=harry.van.haaren@intel.com \
    --cc=jerinj@marvell.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).