DPDK patches and discussions
 help / color / mirror / Atom feed
From: Shiri Kuzin <shirik@nvidia.com>
To: dev@dpdk.org
Cc: viacheslavo@nvidia.com, adrien.mazarguil@6wind.com, rasland@nvidia.com
Subject: [dpdk-dev] [RFC v3 2/8] app/testpmd: add GENEVE option item support
Date: Wed, 16 Dec 2020 15:02:09 +0200	[thread overview]
Message-ID: <1608123735-3662-3-git-send-email-shirik@nvidia.com> (raw)
In-Reply-To: <1608123735-3662-1-git-send-email-shirik@nvidia.com>

From: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

The patch adds the GENEVE option rte flow item support to
command line interpreter. The flow command with GENEVE
option items looks like:

  flow create 0 ingress pattern eth / ipv4 / udp / geneve vni is 100 /
       geneve-opt class is 99 length is 1 type is 0 data is 0x669988 /
       end actions drop / end

The option length should be specified in 32-bit words, this
value specifies the length of the data pattern/mask arrays (should be
multiplied by sizeof(uint32_t) to be expressed in bytes. If match
on the length itself is not needed the mask should be set to zero, in
this case length is used to specify the pattern/mask array lengths only.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
---
 app/test-pmd/cmdline_flow.c                 | 102 ++++++++++++++++++++++++++--
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   8 +++
 2 files changed, 104 insertions(+), 6 deletions(-)

diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index 585cab9..8bb2cb1 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -283,6 +283,11 @@ enum index {
 	ITEM_ECPRI_MSG_IQ_DATA_PCID,
 	ITEM_ECPRI_MSG_RTC_CTRL_RTCID,
 	ITEM_ECPRI_MSG_DLY_MSR_MSRID,
+	ITEM_GENEVE_OPT,
+	ITEM_GENEVE_OPT_CLASS,
+	ITEM_GENEVE_OPT_TYPE,
+	ITEM_GENEVE_OPT_LENGTH,
+	ITEM_GENEVE_OPT_DATA,
 
 	/* Validate/create actions. */
 	ACTIONS,
@@ -413,6 +418,9 @@ enum index {
 /** Maximum size for pattern in struct rte_flow_item_raw. */
 #define ITEM_RAW_PATTERN_SIZE 40
 
+/** Maximum size for GENEVE option data pattern in bytes. */
+#define ITEM_GENEVE_OPT_DATA_SIZE 124
+
 /** Storage size for struct rte_flow_item_raw including pattern. */
 #define ITEM_RAW_SIZE \
 	(sizeof(struct rte_flow_item_raw) + ITEM_RAW_PATTERN_SIZE)
@@ -428,7 +436,7 @@ struct action_rss_data {
 };
 
 /** Maximum data size in struct rte_flow_action_raw_encap. */
-#define ACTION_RAW_ENCAP_MAX_DATA 128
+#define ACTION_RAW_ENCAP_MAX_DATA 512
 #define RAW_ENCAP_CONFS_MAX_NUM 8
 
 /** Storage for struct rte_flow_action_raw_encap. */
@@ -658,6 +666,16 @@ struct token {
 		.mask = (const void *)&(const s){ .f = (1 << (b)) - 1 }, \
 	})
 
+/** Static initializer for ARGS() to target a field with limits. */
+#define ARGS_ENTRY_BOUNDED(s, f, i, a) \
+	(&(const struct arg){ \
+		.bounded = 1, \
+		.min = (i), \
+		.max = (a), \
+		.offset = offsetof(s, f), \
+		.size = sizeof(((s *)0)->f), \
+	})
+
 /** Static initializer for ARGS() to target an arbitrary bit-mask. */
 #define ARGS_ENTRY_MASK(s, f, m) \
 	(&(const struct arg){ \
@@ -903,6 +921,7 @@ struct parse_action_priv {
 	ITEM_AH,
 	ITEM_PFCP,
 	ITEM_ECPRI,
+	ITEM_GENEVE_OPT,
 	END_SET,
 	ZERO,
 };
@@ -1244,6 +1263,15 @@ struct parse_action_priv {
 	ZERO,
 };
 
+static const enum index item_geneve_opt[] = {
+	ITEM_GENEVE_OPT_CLASS,
+	ITEM_GENEVE_OPT_TYPE,
+	ITEM_GENEVE_OPT_LENGTH,
+	ITEM_GENEVE_OPT_DATA,
+	ITEM_NEXT,
+	ZERO,
+};
+
 static const enum index next_action[] = {
 	ACTION_END,
 	ACTION_VOID,
@@ -3230,6 +3258,47 @@ static int comp_set_sample_index(struct context *, const struct token *,
 		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_ecpri,
 				hdr.type5.msr_id)),
 	},
+	[ITEM_GENEVE_OPT] = {
+		.name = "geneve-opt",
+		.help = "GENEVE header option",
+		.priv = PRIV_ITEM(GENEVE_OPT,
+				  sizeof(struct rte_flow_item_geneve_opt) +
+				  ITEM_GENEVE_OPT_DATA_SIZE),
+		.next = NEXT(item_geneve_opt),
+		.call = parse_vc,
+	},
+	[ITEM_GENEVE_OPT_CLASS]	= {
+		.name = "class",
+		.help = "GENEVE option class",
+		.next = NEXT(item_geneve_opt, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_geneve_opt,
+					     option_class)),
+	},
+	[ITEM_GENEVE_OPT_TYPE] = {
+		.name = "type",
+		.help = "GENEVE option type",
+		.next = NEXT(item_geneve_opt, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY(struct rte_flow_item_geneve_opt,
+					option_type)),
+	},
+	[ITEM_GENEVE_OPT_LENGTH] = {
+		.name = "length",
+		.help = "GENEVE option data length (in 32b words)",
+		.next = NEXT(item_geneve_opt, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_BOUNDED(
+				struct rte_flow_item_geneve_opt, option_len,
+				0, 31)),
+	},
+	[ITEM_GENEVE_OPT_DATA] = {
+		.name = "data",
+		.help = "GENEVE option data pattern",
+		.next = NEXT(item_geneve_opt, NEXT_ENTRY(HEX), item_param),
+		.args = ARGS(ARGS_ENTRY(struct rte_flow_item_geneve_opt, data),
+			     ARGS_ENTRY_ARB(0, 0),
+			     ARGS_ENTRY_ARB
+				(sizeof(struct rte_flow_item_geneve_opt),
+				ITEM_GENEVE_OPT_DATA_SIZE)),
+	},
 	/* Validate/create actions. */
 	[ACTIONS] = {
 		.name = "actions",
@@ -6482,11 +6551,14 @@ static int comp_set_sample_index(struct context *, const struct token *,
 	ret = snprintf(tmp, sizeof(tmp), "%u", hexlen);
 	if (ret < 0)
 		goto error;
-	push_args(ctx, arg_len);
-	ret = parse_int(ctx, token, tmp, ret, NULL, 0);
-	if (ret < 0) {
-		pop_args(ctx);
-		goto error;
+	/* Save length if requested. */
+	if (arg_len->size) {
+		push_args(ctx, arg_len);
+		ret = parse_int(ctx, token, tmp, ret, NULL, 0);
+		if (ret < 0) {
+			pop_args(ctx);
+			goto error;
+		}
 	}
 	buf = (uint8_t *)ctx->object + arg_data->offset;
 	/* Output buffer is not necessarily NUL-terminated. */
@@ -7486,6 +7558,9 @@ static int comp_set_sample_index(struct context *, const struct token *,
 	case RTE_FLOW_ITEM_TYPE_GENEVE:
 		mask = &rte_flow_item_geneve_mask;
 		break;
+	case RTE_FLOW_ITEM_TYPE_GENEVE_OPT:
+		mask = &rte_flow_item_geneve_opt_mask;
+		break;
 	case RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID:
 		mask = &rte_flow_item_pppoe_proto_id_mask;
 		break;
@@ -7598,6 +7673,8 @@ static int comp_set_sample_index(struct context *, const struct token *,
 	/* process hdr from upper layer to low layer (L3/L4 -> L2). */
 	data_tail = data + ACTION_RAW_ENCAP_MAX_DATA;
 	for (i = n - 1 ; i >= 0; --i) {
+		const struct rte_flow_item_geneve_opt *opt;
+
 		item = in->args.vc.pattern + i;
 		if (item->spec == NULL)
 			item->spec = flow_item_default_mask(item);
@@ -7650,6 +7727,19 @@ static int comp_set_sample_index(struct context *, const struct token *,
 		case RTE_FLOW_ITEM_TYPE_GENEVE:
 			size = sizeof(struct rte_geneve_hdr);
 			break;
+		case RTE_FLOW_ITEM_TYPE_GENEVE_OPT:
+			opt = (const struct rte_flow_item_geneve_opt *)
+								item->spec;
+			size = sizeof(struct rte_flow_item_geneve_opt) -
+			       sizeof(opt->data);
+			if (opt->option_len && opt->data) {
+				*total_size += opt->option_len *
+					       sizeof(uint32_t);
+				rte_memcpy(data_tail - (*total_size),
+					   opt->data,
+					   opt->option_len * sizeof(uint32_t));
+			}
+			break;
 		case RTE_FLOW_ITEM_TYPE_L2TPV3OIP:
 			size = sizeof(rte_be32_t);
 			proto = 0x73;
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 9be4500..37278d3 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -3680,6 +3680,14 @@ This section lists supported pattern items and their attributes, if any.
   - ``vni {unsigned}``: virtual network identifier.
   - ``protocol {unsigned}``: protocol type.
 
+- ``geneve-opt``: match GENEVE header option.
+
+  - ``class {unsigned}``: GENEVE option class.
+  - ``type {unsigned}``: GENEVE option type.
+  - ``length {unsigned}``: GENEVE option length in 32-bit words.
+  - ``data {hex string}``: GENEVE option data, the legnt is defined by
+    ``length`` field
+
 - ``vxlan-gpe``: match VXLAN-GPE header.
 
   - ``vni {unsigned}``: VXLAN-GPE identifier.
-- 
1.8.3.1


  parent reply	other threads:[~2020-12-16 13:02 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-03  7:39 [dpdk-dev] [RFC v2] ethdev: introduce GENEVE header extension item Shiri Kuzin
2020-10-01 16:25 ` Ferruh Yigit
2020-10-05 12:44   ` Shiri Kuzin
2020-10-05 13:10     ` Ferruh Yigit
2020-12-16 13:02 ` [dpdk-dev] [RFC v3 0/8] ethdev: introduce GENEVE header TLV option item Shiri Kuzin
2020-12-16 13:02   ` [dpdk-dev] [RFC v3 1/8] lib/librte_ethdev: " Shiri Kuzin
2020-12-16 13:02   ` Shiri Kuzin [this message]
2021-01-14 20:08     ` [dpdk-dev] [RFC v3 2/8] app/testpmd: add GENEVE option item support Ajit Khaparde
2021-01-17  8:31       ` Shiri Kuzin
2020-12-16 13:02   ` [dpdk-dev] [RFC v3 3/8] common/mlx5: check GENEVE TLV support in HCA attributes Shiri Kuzin
2020-12-16 13:02   ` [dpdk-dev] [RFC v3 4/8] common/mlx5: create GENEVE TLV option object with DevX Shiri Kuzin
2020-12-16 13:02   ` [dpdk-dev] [RFC v3 5/8] net/mlx5: create GENEVE TLV option management Shiri Kuzin
2020-12-16 13:02   ` [dpdk-dev] [RFC v3 6/8] net/mlx5: add GENEVE TLV option flow validation Shiri Kuzin
2020-12-16 13:02   ` [dpdk-dev] [RFC v3 7/8] net/mlx5: add GENEVE TLV option flow translation Shiri Kuzin
2020-12-16 13:02   ` [dpdk-dev] [RFC v3 8/8] doc: update GENEVE TLV option support Shiri Kuzin
2020-12-16 14:25 ` [dpdk-dev] [RFC 0/6] add GTP PSC extension header support Shiri Kuzin
2020-12-16 14:25   ` [dpdk-dev] [RFC 1/6] ethdev: update GTP headers Shiri Kuzin
2020-12-16 14:25   ` [dpdk-dev] [RFC 2/6] app/testpmd: add GTP PSC option support in raw sets Shiri Kuzin
2020-12-16 14:25   ` [dpdk-dev] [RFC 3/6] common/mlx5: add matcher fields for GTP extensions Shiri Kuzin
2020-12-16 14:25   ` [dpdk-dev] [RFC 4/6] net/mlx5: add GTP PSC flow validation Shiri Kuzin
2020-12-16 14:25   ` [dpdk-dev] [RFC 5/6] net/mlx5: add GTP PSC item translation Shiri Kuzin
2020-12-16 14:25   ` [dpdk-dev] [RFC 6/6] doc: update GTP extension header support Shiri Kuzin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1608123735-3662-3-git-send-email-shirik@nvidia.com \
    --to=shirik@nvidia.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=rasland@nvidia.com \
    --cc=viacheslavo@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).