DPDK patches and discussions
 help / color / mirror / Atom feed
From: Bernard Iremonger <bernard.iremonger@intel.com>
To: dev@dpdk.org, xiaoyun.li@intel.com
Cc: Bernard Iremonger <bernard.iremonger@intel.com>, stable@dpdk.org
Subject: [dpdk-dev] [PATCH v2] doc: fix testpmd sample qinq flow rules
Date: Tue, 19 Jan 2021 13:00:52 +0000
Message-ID: <1611061252-19605-1-git-send-email-bernard.iremonger@intel.com> (raw)
In-Reply-To: <1610623187-3631-1>

In the Testpmd Flow rules management section, correct
the TPID values in the Sample QinQ flow rules sub section.
Also replace the keyword qinq_strip with extend in the
vlan set command.

Fixes: bef3bfe7d5f4 ("doc: revise sample testpmd flow commands")
Cc: stable@dpdk.org

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 9be4500..6a00245 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -4426,14 +4426,14 @@ Sample QinQ flow rules
 Before creating QinQ rule(s) the following commands should be issued to enable QinQ::
    testpmd> port stop 0
-   testpmd> vlan set qinq_strip on 0
+   testpmd> vlan set extend on 0
 The above command sets the inner and outer TPID's to 0x8100.
 To change the TPID's the following commands should be used::
-   testpmd> vlan set outer tpid 0xa100 0
-   testpmd> vlan set inner tpid 0x9100 0
+   testpmd> vlan set outer tpid 0x88A8 0
+   testpmd> vlan set inner tpid 0x8100 0
    testpmd> port start 0
 Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM.

       reply	other threads:[~2021-01-19 13:01 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1610623187-3631-1>
2021-01-19 13:00 ` Bernard Iremonger [this message]
2021-01-20  1:42   ` Li, Xiaoyun
2021-02-02  9:59     ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1611061252-19605-1-git-send-email-bernard.iremonger@intel.com \
    --to=bernard.iremonger@intel.com \
    --cc=dev@dpdk.org \
    --cc=stable@dpdk.org \
    --cc=xiaoyun.li@intel.com \


* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/public-inbox.git