From: Lijun Ou <oulijun@huawei.com>
To: <ferruh.yigit@intel.com>
Cc: <dev@dpdk.org>, <linuxarm@openeuler.org>
Subject: [dpdk-dev] [PATCH 01/17] net/hns3: support module EEPROM dump
Date: Wed, 3 Feb 2021 15:46:06 +0800 [thread overview]
Message-ID: <1612338382-3253-2-git-send-email-oulijun@huawei.com> (raw)
In-Reply-To: <1612338382-3253-1-git-send-email-oulijun@huawei.com>
From: Chengchang Tang <tangchengchang@huawei.com>
This patch add support for dumping module EEPROM.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
---
Depends-on: series-10000 ("update doc for hns3")
---
doc/guides/nics/features/hns3.ini | 1 +
doc/guides/rel_notes/release_21_02.rst | 1 +
drivers/net/hns3/hns3_cmd.h | 16 ++++
drivers/net/hns3/hns3_ethdev.c | 159 +++++++++++++++++++++++++++++++++
4 files changed, 177 insertions(+)
diff --git a/doc/guides/nics/features/hns3.ini b/doc/guides/nics/features/hns3.ini
index 452a7b5..40febb0 100644
--- a/doc/guides/nics/features/hns3.ini
+++ b/doc/guides/nics/features/hns3.ini
@@ -38,6 +38,7 @@ Extended stats = Y
Stats per queue = Y
FW version = Y
Registers dump = Y
+Module EEPROM dump = Y
Multiprocess aware = Y
FEC = Y
Linux = Y
diff --git a/doc/guides/rel_notes/release_21_02.rst b/doc/guides/rel_notes/release_21_02.rst
index b87db22..cfbc42f 100644
--- a/doc/guides/rel_notes/release_21_02.rst
+++ b/doc/guides/rel_notes/release_21_02.rst
@@ -95,6 +95,7 @@ New Features
* **Updated hns3 driver.**
* Added support for traffic management
+ * Added support for module EEPROM dumping
* **Updated Intel ice driver.**
diff --git a/drivers/net/hns3/hns3_cmd.h b/drivers/net/hns3/hns3_cmd.h
index dc97a1a..e5852dc 100644
--- a/drivers/net/hns3/hns3_cmd.h
+++ b/drivers/net/hns3/hns3_cmd.h
@@ -207,6 +207,8 @@ enum hns3_opcode_type {
HNS3_OPC_CLEAR_HW_STATE = 0x700B,
/* SFP command */
+ HNS3_OPC_GET_SFP_EEPROM = 0x7100,
+ HNS3_OPC_GET_SFP_EXIST = 0x7101,
HNS3_OPC_SFP_GET_SPEED = 0x7104,
/* Interrupts commands */
@@ -698,6 +700,20 @@ struct hns3_config_auto_neg_cmd {
#define HNS3_MAC_FEC_BASER 1
#define HNS3_MAC_FEC_RS 2
+#define HNS3_SFP_INFO_BD0_LEN 20UL
+#define HNS3_SFP_INFO_BDX_LEN 24UL
+
+struct hns3_sfp_info_bd0_cmd {
+ uint16_t offset;
+ uint16_t read_len;
+ uint8_t data[HNS3_SFP_INFO_BD0_LEN];
+};
+
+struct hns3_sfp_type {
+ uint8_t type;
+ uint8_t ext_type;
+};
+
struct hns3_sfp_speed_cmd {
uint32_t sfp_speed;
uint8_t query_type; /* 0: sfp speed, 1: active fec */
diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 221e008..31418b8 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -6105,6 +6105,163 @@ hns3_query_dev_fec_info(struct hns3_hw *hw)
return ret;
}
+static bool
+hns3_optical_module_existed(struct hns3_hw *hw)
+{
+ struct hns3_cmd_desc desc;
+ bool existed;
+ int ret;
+
+ hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_GET_SFP_EXIST, true);
+ ret = hns3_cmd_send(hw, &desc, 1);
+ if (ret) {
+ hns3_err(hw,
+ "fail to get optical module exist state, ret = %d.\n",
+ ret);
+ return false;
+ }
+ existed = !!desc.data[0];
+
+ return existed;
+}
+
+static int
+hns3_get_module_eeprom_data(struct hns3_hw *hw, uint32_t offset,
+ uint32_t len, uint8_t *data)
+{
+#define HNS3_SFP_INFO_CMD_NUM 6
+#define HNS3_SFP_INFO_MAX_LEN \
+ (HNS3_SFP_INFO_BD0_LEN + \
+ (HNS3_SFP_INFO_CMD_NUM - 1) * HNS3_SFP_INFO_BDX_LEN)
+ struct hns3_cmd_desc desc[HNS3_SFP_INFO_CMD_NUM];
+ struct hns3_sfp_info_bd0_cmd *sfp_info_bd0;
+ uint16_t read_len;
+ uint16_t copy_len;
+ int ret;
+ int i;
+
+ for (i = 0; i < HNS3_SFP_INFO_CMD_NUM; i++) {
+ hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_GET_SFP_EEPROM,
+ true);
+ if (i < HNS3_SFP_INFO_CMD_NUM - 1)
+ desc[i].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
+ }
+
+ sfp_info_bd0 = (struct hns3_sfp_info_bd0_cmd *)desc[0].data;
+ sfp_info_bd0->offset = rte_cpu_to_le_16((uint16_t)offset);
+ read_len = RTE_MIN(len, HNS3_SFP_INFO_MAX_LEN);
+ sfp_info_bd0->read_len = rte_cpu_to_le_16((uint16_t)read_len);
+
+ ret = hns3_cmd_send(hw, desc, HNS3_SFP_INFO_CMD_NUM);
+ if (ret) {
+ hns3_err(hw, "fail to get module EEPROM info, ret = %d.\n",
+ ret);
+ return ret;
+ }
+
+ /* The data format in BD0 is different with the others. */
+ copy_len = RTE_MIN(len, HNS3_SFP_INFO_BD0_LEN);
+ memcpy(data, sfp_info_bd0->data, copy_len);
+ read_len = copy_len;
+
+ for (i = 1; i < HNS3_SFP_INFO_CMD_NUM; i++) {
+ if (read_len >= len)
+ break;
+
+ copy_len = RTE_MIN(len - read_len, HNS3_SFP_INFO_BDX_LEN);
+ memcpy(data + read_len, desc[i].data, copy_len);
+ read_len += copy_len;
+ }
+
+ return (int)read_len;
+}
+
+static int
+hns3_get_module_eeprom(struct rte_eth_dev *dev,
+ struct rte_dev_eeprom_info *info)
+{
+ struct hns3_adapter *hns = dev->data->dev_private;
+ struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(hns);
+ uint32_t offset = info->offset;
+ uint32_t len = info->length;
+ uint8_t *data = info->data;
+ uint32_t read_len = 0;
+
+ if (hw->mac.media_type != HNS3_MEDIA_TYPE_FIBER)
+ return -ENOTSUP;
+
+ if (!hns3_optical_module_existed(hw)) {
+ hns3_err(hw, "fail to read module EEPROM: no module is connected.\n");
+ return -EIO;
+ }
+
+ while (read_len < len) {
+ int ret;
+ ret = hns3_get_module_eeprom_data(hw, offset + read_len,
+ len - read_len,
+ data + read_len);
+ if (ret < 0)
+ return -EIO;
+ read_len += ret;
+ }
+
+ return 0;
+}
+
+static int
+hns3_get_module_info(struct rte_eth_dev *dev,
+ struct rte_eth_dev_module_info *modinfo)
+{
+#define HNS3_SFF8024_ID_SFP 0x03
+#define HNS3_SFF8024_ID_QSFP_8438 0x0c
+#define HNS3_SFF8024_ID_QSFP_8436_8636 0x0d
+#define HNS3_SFF8024_ID_QSFP28_8636 0x11
+#define HNS3_SFF_8636_V1_3 0x03
+ struct hns3_adapter *hns = dev->data->dev_private;
+ struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(hns);
+ struct rte_dev_eeprom_info info;
+ struct hns3_sfp_type sfp_type;
+ int ret;
+
+ memset(&sfp_type, 0, sizeof(sfp_type));
+ memset(&info, 0, sizeof(info));
+ info.data = (uint8_t *)&sfp_type;
+ info.length = sizeof(sfp_type);
+ ret = hns3_get_module_eeprom(dev, &info);
+ if (ret)
+ return ret;
+
+ switch (sfp_type.type) {
+ case HNS3_SFF8024_ID_SFP:
+ modinfo->type = RTE_ETH_MODULE_SFF_8472;
+ modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8472_LEN;
+ break;
+ case HNS3_SFF8024_ID_QSFP_8438:
+ modinfo->type = RTE_ETH_MODULE_SFF_8436;
+ modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8436_MAX_LEN;
+ break;
+ case HNS3_SFF8024_ID_QSFP_8436_8636:
+ if (sfp_type.ext_type < HNS3_SFF_8636_V1_3) {
+ modinfo->type = RTE_ETH_MODULE_SFF_8436;
+ modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8436_MAX_LEN;
+ } else {
+ modinfo->type = RTE_ETH_MODULE_SFF_8636;
+ modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8636_MAX_LEN;
+ }
+ break;
+ case HNS3_SFF8024_ID_QSFP28_8636:
+ modinfo->type = RTE_ETH_MODULE_SFF_8636;
+ modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8636_MAX_LEN;
+ break;
+ default:
+ hns3_err(hw, "unknown module, type = %u, extra_type = %u.\n",
+ sfp_type.type, sfp_type.ext_type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static const struct eth_dev_ops hns3_eth_dev_ops = {
.dev_configure = hns3_dev_configure,
.dev_start = hns3_dev_start,
@@ -6156,6 +6313,8 @@ static const struct eth_dev_ops hns3_eth_dev_ops = {
.vlan_offload_set = hns3_vlan_offload_set,
.vlan_pvid_set = hns3_vlan_pvid_set,
.get_reg = hns3_get_regs,
+ .get_module_info = hns3_get_module_info,
+ .get_module_eeprom = hns3_get_module_eeprom,
.get_dcb_info = hns3_get_dcb_info,
.dev_supported_ptypes_get = hns3_dev_supported_ptypes_get,
.fec_get_capability = hns3_fec_get_capability,
--
2.7.4
next prev parent reply other threads:[~2021-02-03 7:47 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-03 7:46 [dpdk-dev] [PATCH 00/17] bugfixes and small functionality for hns3 Lijun Ou
2021-02-03 7:46 ` Lijun Ou [this message]
2021-02-03 7:46 ` [dpdk-dev] [PATCH 02/17] net/hns3: add more registers to dump Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 03/17] net/hns3: implement cleanup for Tx done Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 04/17] net/hns3: add enhance stats function Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 05/17] net/hns3: fix query order of link status and link info Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 06/17] net/hns3: fix link status change from firmware Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 07/17] net/hns3: encapsulate a port shaping interface Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 08/17] net/hns3: support PF on electrical net device Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 09/17] net/hns3: fix RSS indirection table size Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 10/17] net/hns3: constraint TM peak rate Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 11/17] net/hns3: remove MPLS type from supported flow items Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 12/17] net/hns3: fix stats flip overflow Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 13/17] net/hns3: replace all atomic type with C11 atomic builtins Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 14/17] net/hns3: fix FD rule residue in hardware when malloc fail Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 15/17] net/hns3: fix cmdq cleared during firmware process Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 16/17] net/hns3: fix VF reset after MBX failed Lijun Ou
2021-02-03 7:46 ` [dpdk-dev] [PATCH 17/17] net/hns3: add check for max pkt length of Rx Lijun Ou
2021-02-03 9:24 ` [dpdk-dev] [PATCH 00/17] bugfixes and small functionality for hns3 Ferruh Yigit
2021-02-03 11:05 ` oulijun
2021-02-03 11:46 ` Ferruh Yigit
2021-02-03 12:18 ` oulijun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1612338382-3253-2-git-send-email-oulijun@huawei.com \
--to=oulijun@huawei.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=linuxarm@openeuler.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).