DPDK patches and discussions
 help / color / mirror / Atom feed
From: Lijun Ou <oulijun@huawei.com>
To: <ferruh.yigit@intel.com>
Cc: <dev@dpdk.org>, <linuxarm@openeuler.org>
Subject: [dpdk-dev] [PATCH 02/11] net/hns3: fix link status change from firmware
Date: Wed, 3 Feb 2021 20:23:48 +0800	[thread overview]
Message-ID: <1612355037-48768-3-git-send-email-oulijun@huawei.com> (raw)
In-Reply-To: <1612355037-48768-1-git-send-email-oulijun@huawei.com>

From: Huisong Li <lihuisong@huawei.com>

When the hardware link status changes, the firmware proactively
reports the link status change message, and then driver update
link status. This feature is lack of a switch to control in pf
driver. Otherwise, this feature does not take effect when the
kernel PF driver that supports the feature is not loaded.

Fixes: 109e4dd1bd7a ("net/hns3: get link state change through mailbox")
Cc: stable@dpdk.org

Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
---
 drivers/net/hns3/hns3_cmd.h    | 10 ++++++++++
 drivers/net/hns3/hns3_ethdev.c | 31 +++++++++++++++++++++++++++++++
 2 files changed, 41 insertions(+)

diff --git a/drivers/net/hns3/hns3_cmd.h b/drivers/net/hns3/hns3_cmd.h
index dc97a1a..ad5e188 100644
--- a/drivers/net/hns3/hns3_cmd.h
+++ b/drivers/net/hns3/hns3_cmd.h
@@ -206,6 +206,9 @@ enum hns3_opcode_type {
 	/* Clear hardware state command */
 	HNS3_OPC_CLEAR_HW_STATE         = 0x700B,
 
+	/* Firmware stats command */
+	HNS3_OPC_FIRMWARE_COMPAT_CFG    = 0x701A,
+
 	/* SFP command */
 	HNS3_OPC_SFP_GET_SPEED          = 0x7104,
 
@@ -633,6 +636,13 @@ enum hns3_promisc_type {
 	HNS3_BROADCAST	= 3,
 };
 
+#define HNS3_LINK_EVENT_REPORT_EN_B	0
+#define HNS3_NCSI_ERROR_REPORT_EN_B	1
+struct hns3_firmware_compat_cmd {
+	uint32_t compat;
+	uint8_t rsv[20];
+};
+
 #define HNS3_MAC_TX_EN_B		6
 #define HNS3_MAC_RX_EN_B		7
 #define HNS3_MAC_PAD_TX_B		11
diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 8c57b63..f93870d 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -3919,6 +3919,26 @@ hns3_buffer_alloc(struct hns3_hw *hw)
 }
 
 static int
+hns3_firmware_compat_config(struct hns3_hw *hw, bool is_init)
+{
+	struct hns3_firmware_compat_cmd *req;
+	struct hns3_cmd_desc desc;
+	uint32_t compat = 0;
+
+	hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_FIRMWARE_COMPAT_CFG, false);
+	req = (struct hns3_firmware_compat_cmd *)desc.data;
+
+	if (is_init) {
+		hns3_set_bit(compat, HNS3_LINK_EVENT_REPORT_EN_B, 1);
+		hns3_set_bit(compat, HNS3_NCSI_ERROR_REPORT_EN_B, 0);
+	}
+
+	req->compat = rte_cpu_to_le_32(compat);
+
+	return hns3_cmd_send(hw, &desc, 1);
+}
+
+static int
 hns3_mac_init(struct hns3_hw *hw)
 {
 	struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
@@ -4610,6 +4630,15 @@ hns3_init_hardware(struct hns3_adapter *hns)
 		goto err_mac_init;
 	}
 
+	/*
+	 * Requiring firmware to enable some features, driver can
+	 * still work without it.
+	 */
+	ret = hns3_firmware_compat_config(hw, true);
+	if (ret)
+		PMD_INIT_LOG(WARNING, "firmware compatible features not "
+			     "supported, ret = %d.", ret);
+
 	return 0;
 
 err_mac_init:
@@ -4746,6 +4775,7 @@ hns3_init_pf(struct rte_eth_dev *eth_dev)
 err_enable_intr:
 	hns3_fdir_filter_uninit(hns);
 err_fdir:
+	(void)hns3_firmware_compat_config(hw, false);
 	hns3_uninit_umv_space(hw);
 err_init_hw:
 	hns3_tqp_stats_uninit(hw);
@@ -4780,6 +4810,7 @@ hns3_uninit_pf(struct rte_eth_dev *eth_dev)
 	(void)hns3_config_gro(hw, false);
 	hns3_promisc_uninit(hw);
 	hns3_fdir_filter_uninit(hns);
+	(void)hns3_firmware_compat_config(hw, false);
 	hns3_uninit_umv_space(hw);
 	hns3_tqp_stats_uninit(hw);
 	hns3_pf_disable_irq0(hw);
-- 
2.7.4


  parent reply	other threads:[~2021-02-03 12:24 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-03 12:23 [dpdk-dev] [PATCH 00/11] critical bugfixes for hns3 Lijun Ou
2021-02-03 12:23 ` [dpdk-dev] [PATCH 01/11] net/hns3: fix query order of link status and link info Lijun Ou
2021-02-03 12:23 ` Lijun Ou [this message]
2021-02-03 12:23 ` [dpdk-dev] [PATCH 03/11] net/hns3: fix RSS indirection table size Lijun Ou
2021-02-03 12:23 ` [dpdk-dev] [PATCH 04/11] net/hns3: constraint TM peak rate Lijun Ou
2021-02-03 12:23 ` [dpdk-dev] [PATCH 05/11] net/hns3: remove MPLS type from supported flow items Lijun Ou
2021-02-03 12:23 ` [dpdk-dev] [PATCH 06/11] net/hns3: fix stats flip overflow Lijun Ou
2021-02-03 12:23 ` [dpdk-dev] [PATCH 07/11] net/hns3: replace all atomic type with C11 atomic builtins Lijun Ou
2021-02-03 12:23 ` [dpdk-dev] [PATCH 08/11] net/hns3: fix FD rule residue in hardware when malloc fail Lijun Ou
2021-02-03 12:23 ` [dpdk-dev] [PATCH 09/11] net/hns3: fix cmdq cleared during firmware process Lijun Ou
2021-02-03 12:23 ` [dpdk-dev] [PATCH 10/11] net/hns3: fix VF reset after MBX failed Lijun Ou
2021-02-03 12:23 ` [dpdk-dev] [PATCH 11/11] net/hns3: add check for max pkt length of Rx Lijun Ou
2021-02-04 15:45 ` [dpdk-dev] [PATCH 00/11] critical bugfixes for hns3 Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1612355037-48768-3-git-send-email-oulijun@huawei.com \
    --to=oulijun@huawei.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=linuxarm@openeuler.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).