DPDK patches and discussions
 help / color / mirror / Atom feed
From: Lijun Ou <oulijun@huawei.com>
To: <ferruh.yigit@intel.com>
Cc: <dev@dpdk.org>, <linuxarm@openeuler.org>
Subject: [dpdk-dev] [PATCH] app/testpmd: support multi-process
Date: Fri, 5 Mar 2021 09:04:36 +0800
Message-ID: <1614906276-34293-1-git-send-email-oulijun@huawei.com> (raw)
In-Reply-To: <1611151575-10095-1-git-send-email-oulijun@huawei.com>

This patch adds multi-process support for testpmd.
The test cmd example as follows:
the primary cmd:
./testpmd -w xxx --file-prefix=xx -l 0-1 -n 2 -- -i\
--rxq=16 --txq=16 --num-procs=2 --proc-id=0
the secondary cmd:
./testpmd -w xxx --file-prefix=xx -l 2-3 -n 2 -- -i\
--rxq=16 --txq=16 --num-procs=2 --proc-id=1

Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
---
 app/test-pmd/cmdline.c    |  12 +++-
 app/test-pmd/config.c     |   9 ++-
 app/test-pmd/parameters.c |  11 ++++
 app/test-pmd/testpmd.c    | 138 ++++++++++++++++++++++++++++++----------------
 app/test-pmd/testpmd.h    |   7 +++
 5 files changed, 127 insertions(+), 50 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 8b0f7d5..610e850 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -72,8 +72,6 @@
 #include "cmdline_tm.h"
 #include "bpf_cmd.h"
 
-static struct cmdline *testpmd_cl;
-
 static void cmd_reconfig_device_queue(portid_t id, uint8_t dev, uint8_t queue);
 
 /* *** Help command with introduction. *** */
@@ -5353,6 +5351,12 @@ cmd_set_flush_rx_parsed(void *parsed_result,
 		__rte_unused void *data)
 {
 	struct cmd_set_flush_rx *res = parsed_result;
+
+	if (num_procs > 1 && (strcmp(res->mode, "on") == 0)) {
+		printf("multi-process doesn't support to flush rx queues.\n");
+		return;
+	}
+
 	no_flush_rx = (uint8_t)((strcmp(res->mode, "on") == 0) ? 0 : 1);
 }
 
@@ -17316,6 +17320,10 @@ prompt(void)
 		printf("Cannot set exit function for cmdline\n");
 
 	cmdline_interact(testpmd_cl);
+	if (unlikely(f_quit == 1)) {
+		dup2(testpmd_fd_copy, testpmd_cl->s_in);
+		close(testpmd_fd_copy);
+	}
 	if (ret != 0)
 		cmdline_stdin_exit(testpmd_cl);
 }
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 2435c26..8ab8153 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -2827,6 +2827,8 @@ rss_fwd_config_setup(void)
 	queueid_t  rxq;
 	queueid_t  nb_q;
 	streamid_t  sm_id;
+	int start;
+	int end;
 
 	nb_q = nb_rxq;
 	if (nb_q > nb_txq)
@@ -2844,7 +2846,10 @@ rss_fwd_config_setup(void)
 	init_fwd_streams();
 
 	setup_fwd_config_of_each_lcore(&cur_fwd_config);
-	rxp = 0; rxq = 0;
+	start = proc_id * nb_q / num_procs;
+	end = start + nb_q / num_procs;
+	rxp = 0;
+	rxq = start;
 	for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
 		struct fwd_stream *fs;
 
@@ -2861,6 +2866,8 @@ rss_fwd_config_setup(void)
 			continue;
 		rxp = 0;
 		rxq++;
+		if (rxq >= end)
+			rxq = start;
 	}
 }
 
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index c8acd5d..1a5bf25 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -45,6 +45,8 @@
 #include <rte_flow.h>
 
 #include "testpmd.h"
+#define PARAM_PROC_ID "proc-id"
+#define PARAM_NUM_PROCS "num-procs"
 
 static void
 usage(char* progname)
@@ -605,6 +607,8 @@ launch_args_parse(int argc, char** argv)
 		{ "rx-mq-mode",                 1, 0, 0 },
 		{ "record-core-cycles",         0, 0, 0 },
 		{ "record-burst-stats",         0, 0, 0 },
+		{ PARAM_NUM_PROCS,              1, 0, 0 },
+		{ PARAM_PROC_ID,                1, 0, 0 },
 		{ 0, 0, 0, 0 },
 	};
 
@@ -1366,6 +1370,13 @@ launch_args_parse(int argc, char** argv)
 				record_core_cycles = 1;
 			if (!strcmp(lgopts[opt_idx].name, "record-burst-stats"))
 				record_burst_stats = 1;
+
+			if (strncmp(lgopts[opt_idx].name,
+				    PARAM_NUM_PROCS, 8) == 0)
+				num_procs = atoi(optarg);
+			if (strncmp(lgopts[opt_idx].name,
+				    PARAM_PROC_ID, 7) == 0)
+				proc_id = atoi(optarg);
 			break;
 		case 'h':
 			usage(argv[0]);
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 1a57324..bbd45d9 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -63,6 +63,8 @@
 
 #include "testpmd.h"
 
+int testpmd_fd_copy = 500; /* the copy of STDIN_FILENO */
+
 #ifndef MAP_HUGETLB
 /* FreeBSD may not have MAP_HUGETLB (in fact, it probably doesn't) */
 #define HUGE_FLAG (0x40000)
@@ -125,6 +127,9 @@ uint8_t port_numa[RTE_MAX_ETHPORTS];
  */
 uint8_t rxring_numa[RTE_MAX_ETHPORTS];
 
+int proc_id;
+unsigned int num_procs = 1;
+
 /*
  * Store specified sockets on which TX ring to be used by ports
  * is allocated.
@@ -982,16 +987,26 @@ mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf,
 			/* wrapper to rte_mempool_create() */
 			TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
 					rte_mbuf_best_mempool_ops());
-			rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
-				mb_mempool_cache, 0, mbuf_seg_size, socket_id);
+			if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+				rte_mp = rte_pktmbuf_pool_create(pool_name,
+					 nb_mbuf, mb_mempool_cache, 0,
+					 mbuf_seg_size, socket_id);
+			else
+				rte_mp = rte_mempool_lookup(pool_name);
+
 			break;
 		}
 	case MP_ALLOC_ANON:
 		{
-			rte_mp = rte_mempool_create_empty(pool_name, nb_mbuf,
-				mb_size, (unsigned int) mb_mempool_cache,
-				sizeof(struct rte_pktmbuf_pool_private),
-				socket_id, mempool_flags);
+			if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+				rte_mp = rte_mempool_create_empty(pool_name,
+					nb_mbuf, mb_size,
+					(unsigned int)mb_mempool_cache,
+					sizeof(struct rte_pktmbuf_pool_private),
+					socket_id, mempool_flags);
+			else
+				rte_mp = rte_mempool_lookup(pool_name);
+
 			if (rte_mp == NULL)
 				goto err;
 
@@ -1021,9 +1036,13 @@ mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf,
 
 			TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
 					rte_mbuf_best_mempool_ops());
-			rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
-					mb_mempool_cache, 0, mbuf_seg_size,
-					heap_socket);
+			if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+				rte_mp = rte_pktmbuf_pool_create(pool_name,
+					 nb_mbuf, mb_mempool_cache, 0,
+					 mbuf_seg_size, heap_socket);
+			else
+				rte_mp = rte_mempool_lookup(pool_name);
+
 			break;
 		}
 	case MP_ALLOC_XBUF:
@@ -1994,6 +2013,12 @@ flush_fwd_rx_queues(void)
 	uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0;
 	uint64_t timer_period;
 
+	if (num_procs > 1) {
+		printf("multi-process not support for flushing fwd rx "
+		       "queues, skip the below lines and return.\n");
+		return;
+	}
+
 	/* convert to number of cycles */
 	timer_period = rte_get_timer_hz(); /* 1 second timeout */
 
@@ -2503,21 +2528,28 @@ start_port(portid_t pid)
 				return -1;
 			}
 			/* configure port */
-			diag = rte_eth_dev_configure(pi, nb_rxq + nb_hairpinq,
+			if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+				diag = rte_eth_dev_configure(pi,
+						     nb_rxq + nb_hairpinq,
 						     nb_txq + nb_hairpinq,
 						     &(port->dev_conf));
-			if (diag != 0) {
-				if (rte_atomic16_cmpset(&(port->port_status),
-				RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
-					printf("Port %d can not be set back "
-							"to stopped\n", pi);
-				printf("Fail to configure port %d\n", pi);
-				/* try to reconfigure port next time */
-				port->need_reconfig = 1;
-				return -1;
+				if (diag != 0) {
+					if (rte_atomic16_cmpset(
+							&(port->port_status),
+							RTE_PORT_HANDLING,
+							RTE_PORT_STOPPED) == 0)
+						printf("Port %d can not be set "
+						       "back to stopped\n", pi);
+					printf("Fail to configure port %d\n",
+						pi);
+					/* try to reconfigure port next time */
+					port->need_reconfig = 1;
+					return -1;
+				}
 			}
 		}
-		if (port->need_reconfig_queues > 0) {
+		if (port->need_reconfig_queues > 0 &&
+		    rte_eal_process_type() == RTE_PROC_PRIMARY) {
 			port->need_reconfig_queues = 0;
 			/* setup tx queues */
 			for (qi = 0; qi < nb_txq; qi++) {
@@ -2618,15 +2650,18 @@ start_port(portid_t pid)
 		cnt_pi++;
 
 		/* start port */
-		if (rte_eth_dev_start(pi) < 0) {
-			printf("Fail to start port %d\n", pi);
+		if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+			diag = rte_eth_dev_start(pi);
+			if (diag < 0) {
+				printf("Fail to start port %d\n", pi);
 
-			/* Fail to setup rx queue, return */
-			if (rte_atomic16_cmpset(&(port->port_status),
-				RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
-				printf("Port %d can not be set back to "
+				/* Fail to setup rx queue, return */
+				if (rte_atomic16_cmpset(&(port->port_status),
+				    RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
+					printf("Port %d can not be set back to "
 							"stopped\n", pi);
-			continue;
+				continue;
+			}
 		}
 
 		if (rte_atomic16_cmpset(&(port->port_status),
@@ -2755,7 +2790,8 @@ stop_port(portid_t pid)
 		if (port->flow_list)
 			port_flow_flush(pi);
 
-		if (rte_eth_dev_stop(pi) != 0)
+		if (rte_eal_process_type() == RTE_PROC_PRIMARY &&
+		    rte_eth_dev_stop(pi) != 0)
 			RTE_LOG(ERR, EAL, "rte_eth_dev_stop failed for port %u\n",
 				pi);
 
@@ -2824,8 +2860,10 @@ close_port(portid_t pid)
 			continue;
 		}
 
-		port_flow_flush(pi);
-		rte_eth_dev_close(pi);
+		if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+			port_flow_flush(pi);
+		if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+			rte_eth_dev_close(pi);
 	}
 
 	remove_invalid_ports();
@@ -3089,7 +3127,7 @@ pmd_test_exit(void)
 		}
 	}
 	for (i = 0 ; i < RTE_DIM(mempools) ; i++) {
-		if (mempools[i])
+		if (rte_eal_process_type() == RTE_PROC_PRIMARY && mempools[i])
 			rte_mempool_free(mempools[i]);
 	}
 
@@ -3611,6 +3649,10 @@ init_port_dcb_config(portid_t pid,
 	int retval;
 	uint16_t i;
 
+	if (num_procs > 1) {
+		printf("The multi-process feature doesn't support dcb.\n");
+		return -ENOTSUP;
+	}
 	rte_port = &ports[pid];
 
 	memset(&port_conf, 0, sizeof(struct rte_eth_conf));
@@ -3709,13 +3751,6 @@ init_port(void)
 }
 
 static void
-force_quit(void)
-{
-	pmd_test_exit();
-	prompt_exit();
-}
-
-static void
 print_stats(void)
 {
 	uint8_t i;
@@ -3746,12 +3781,16 @@ signal_handler(int signum)
 		if (latencystats_enabled != 0)
 			rte_latencystats_uninit();
 #endif
-		force_quit();
 		/* Set flag to indicate the force termination. */
 		f_quit = 1;
-		/* exit with the expected status */
-		signal(signum, SIG_DFL);
-		kill(getpid(), signum);
+		if (interactive == 1) {
+			dup2(testpmd_cl->s_in, testpmd_fd_copy);
+			close(testpmd_cl->s_in);
+		} else {
+			dup2(0, testpmd_fd_copy);
+			close(0);
+		}
+
 	}
 }
 
@@ -3776,10 +3815,6 @@ main(int argc, char** argv)
 		rte_exit(EXIT_FAILURE, "Cannot init EAL: %s\n",
 			 rte_strerror(rte_errno));
 
-	if (rte_eal_process_type() == RTE_PROC_SECONDARY)
-		rte_exit(EXIT_FAILURE,
-			 "Secondary process type not supported.\n");
-
 	ret = register_eth_event_callback();
 	if (ret != 0)
 		rte_exit(EXIT_FAILURE, "Cannot register for ethdev events");
@@ -3875,8 +3910,10 @@ main(int argc, char** argv)
 		}
 	}
 
-	if (!no_device_start && start_port(RTE_PORT_ALL) != 0)
+	if (!no_device_start && start_port(RTE_PORT_ALL) != 0) {
+		pmd_test_exit();
 		rte_exit(EXIT_FAILURE, "Start ports failed\n");
+	}
 
 	/* set all ports to promiscuous mode by default */
 	RTE_ETH_FOREACH_DEV(port_id) {
@@ -3922,6 +3959,8 @@ main(int argc, char** argv)
 		}
 		prompt();
 		pmd_test_exit();
+		if (unlikely(f_quit == 1))
+			prompt_exit();
 	} else
 #endif
 	{
@@ -3957,6 +3996,11 @@ main(int argc, char** argv)
 		printf("Press enter to exit\n");
 		rc = read(0, &c, 1);
 		pmd_test_exit();
+		if (unlikely(f_quit == 1)) {
+			dup2(testpmd_fd_copy, 0);
+			close(testpmd_fd_copy);
+			prompt_exit();
+		}
 		if (rc < 0)
 			return 1;
 	}
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index ce83f31..6d13417 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -13,6 +13,7 @@
 #include <rte_gso.h>
 #include <cmdline.h>
 #include <sys/queue.h>
+#include  "cmdline.h"
 
 #define RTE_PORT_ALL            (~(portid_t)0x0)
 
@@ -24,6 +25,10 @@
 #define RTE_PORT_CLOSED         (uint16_t)2
 #define RTE_PORT_HANDLING       (uint16_t)3
 
+uint8_t f_quit;
+int testpmd_fd_copy;
+struct cmdline *testpmd_cl;
+
 /*
  * It is used to allocate the memory for hash key.
  * The hash key size is NIC dependent.
@@ -422,6 +427,8 @@ extern uint64_t noisy_lkup_mem_sz;
 extern uint64_t noisy_lkup_num_writes;
 extern uint64_t noisy_lkup_num_reads;
 extern uint64_t noisy_lkup_num_reads_writes;
+extern int proc_id;
+extern unsigned int num_procs;
 
 extern uint8_t dcb_config;
 extern uint8_t dcb_test;
-- 
2.7.4


  reply	other threads:[~2021-03-05  1:03 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-08  9:46 [dpdk-dev] [RFC] " Lijun Ou
2021-01-08 10:28 ` Ferruh Yigit
2021-01-09  9:54   ` oulijun
2021-01-10 12:32 ` Wisam Monther
2021-01-12 14:13   ` oulijun
2021-01-12 14:21     ` Wisam Monther
2021-01-14  2:46       ` oulijun
2021-01-20 14:06 ` [dpdk-dev] [RFC V2] " Lijun Ou
2021-03-05  1:04   ` Lijun Ou [this message]
2021-03-05  4:05     ` [dpdk-dev] [PATCH] " Ajit Khaparde
2021-03-10 11:11       ` Min Hu (Connor)
2021-03-11  2:47     ` [dpdk-dev] [PATCH v2] " Min Hu (Connor)
2021-03-22  2:27       ` Ajit Khaparde
2021-03-22  6:35         ` Min Hu (Connor)
2021-06-15 12:23       ` [dpdk-dev] [PATCH v14] " Min Hu (Connor)
2021-07-02 12:09       ` [dpdk-dev] [PATCH v15] " Andrew Rybchenko
2021-07-02 12:47         ` Andrew Rybchenko
2021-07-08 12:20           ` Min Hu (Connor)
2021-07-08 12:30             ` Andrew Rybchenko
2021-07-08 12:51               ` Min Hu (Connor)
2021-07-10  3:50       ` [dpdk-dev] [PATCH v16] " Min Hu (Connor)
2021-07-24 11:45         ` Thomas Monjalon
2021-07-26  0:26           ` Min Hu (Connor)
2021-07-26  6:30             ` Thomas Monjalon
2021-07-26  7:28               ` Min Hu (Connor)
2021-08-02  1:51                 ` Min Hu (Connor)
2021-08-02  8:03                   ` Thomas Monjalon
2021-08-16 18:12                     ` Singh, Aman Deep
2021-08-24 12:18                       ` Ferruh Yigit
2021-08-24 13:27                         ` Min Hu (Connor)
2021-08-25  2:06       ` [dpdk-dev] [PATCH v17] " Min Hu (Connor)
2021-09-07 13:23         ` Ferruh Yigit
2021-09-08  0:48           ` Min Hu (Connor)
2021-03-11  9:07     ` [dpdk-dev] [PATCH v3] " Min Hu (Connor)
2021-03-20  0:58       ` Min Hu (Connor)
2021-03-22  7:07     ` [dpdk-dev] [PATCH v4] " Min Hu (Connor)
2021-03-22 11:19       ` Ferruh Yigit
2021-03-24  8:08       ` Li, Xiaoyun
2021-03-25 13:32         ` Min Hu (Connor)
2021-03-25 23:25           ` Ajit Khaparde
2021-03-26  6:46             ` Min Hu (Connor)
2021-03-25 13:17     ` [dpdk-dev] [PATCH v5] " Min Hu (Connor)
2021-03-26  6:46     ` [dpdk-dev] [PATCH v6] " Min Hu (Connor)
2021-03-26  8:52     ` [dpdk-dev] [PATCH v7] " Min Hu (Connor)
2021-03-29  7:51       ` Li, Xiaoyun
2021-03-30  1:48         ` Min Hu (Connor)
2021-03-30  1:48     ` [dpdk-dev] [PATCH v8] " Min Hu (Connor)
2021-03-30  2:17       ` Li, Xiaoyun
2021-03-30  6:36         ` Min Hu (Connor)
2021-03-30  3:11       ` Ajit Khaparde
2021-03-30  6:41         ` Min Hu (Connor)
2021-03-30 10:19           ` Ferruh Yigit
2021-03-30 10:43             ` Min Hu (Connor)
2021-04-08 10:32               ` Min Hu (Connor)
2021-04-08 13:27                 ` Ferruh Yigit
2021-04-09  0:45                   ` Min Hu (Connor)
2021-04-12 16:37       ` Ferruh Yigit
2021-04-15  7:54         ` Ferruh Yigit
2021-04-16  2:20           ` Min Hu (Connor)
2021-04-16  1:52     ` [dpdk-dev] [PATCH v9] " Min Hu (Connor)
2021-04-16 16:30       ` Ferruh Yigit
2021-04-17  6:12         ` Min Hu (Connor)
2021-04-17  6:12     ` [dpdk-dev] [PATCH v10] " Min Hu (Connor)
2021-04-17 22:21       ` Ferruh Yigit
2021-04-19  1:03         ` Min Hu (Connor)
2021-04-19  1:03     ` [dpdk-dev] [PATCH v11] " Min Hu (Connor)
2021-04-19 13:42       ` Ferruh Yigit
2021-04-21  9:08         ` Min Hu (Connor)
2021-04-21  8:36     ` [dpdk-dev] [PATCH v12] " Min Hu (Connor)
2021-04-22  1:18     ` [dpdk-dev] [PATCH v13] " Min Hu (Connor)
2021-06-08  8:42       ` Andrew Rybchenko
2021-06-08 10:22         ` Thomas Monjalon
2021-06-08 10:39           ` Andrew Rybchenko
2021-06-08 12:02             ` Thomas Monjalon
2021-06-08 12:36             ` Ferruh Yigit
2021-06-15 12:04         ` Min Hu (Connor)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1614906276-34293-1-git-send-email-oulijun@huawei.com \
    --to=oulijun@huawei.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=linuxarm@openeuler.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git