From: Jie Zhou <jizh@linux.microsoft.com>
To: dev@dpdk.org
Cc: dmitry.kozliuk@gmail.com, bruce.richardson@intel.com
Subject: [dpdk-dev] [PATCH v4] rte_metrics: unconditionally exports rte_metrics_tel_xxx functions
Date: Mon, 8 Mar 2021 10:05:39 -0800 [thread overview]
Message-ID: <1615226739-27419-1-git-send-email-jizh@linux.microsoft.com> (raw)
In-Reply-To: <1614192383-20597-1-git-send-email-jizh@linux.microsoft.com>
From: Jie Zhou <jizh@microsoft.com>
This patch allows the same set of rte_metrics_tel_* functions to be
exported no matter JANSSON is available or not, by doing following:
1. Leverage dpdk_conf to set configuration flag RTE_HAVE_JANSSON
when Jansson dependency is found.
2. In rte_metrics_telemetry.c, leverage RTE_HAVE_JANSSON to handle the
case when JANSSON is not available by adding stubs for all the instances.
3. In meson.build, per dpdk\doc\guides\rel_notes\release_20_05.rst,
it is claimed that "Telemetry library is no longer dependent on the
external Jansson library, which allows Telemetry be enabled by default.",
thus make the deps and includes of Telemetry as not conditional anymore.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
---
V2 changes:
Address comments from Dmitry Kozlyuk <dmitry.kozliuk@gmail.com> and
Bruce Richardson <bruce.richardson@intel.com>:
- Set dpdk.conf RTE_HAS_JANSSON in metrics meson.build.
- Reduce #ifdef RTE_HAS_JANSSON blocks.
V3 changes:
Address comment from Bruce Richardson <bruce.richardson@intel.com>:
- Remove redundant includes line on librte_telemetry.
V4 changes:
Carry forward Acked-by from previous versions.
Address comments from Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>:
- Move change log below "---" so that it's not included in commit.
---
lib/librte_metrics/meson.build | 11 ++--
lib/librte_metrics/rte_metrics_telemetry.c | 60 +++++++++++++++++++++-
lib/librte_metrics/rte_metrics_telemetry.h | 2 +-
3 files changed, 64 insertions(+), 9 deletions(-)
diff --git a/lib/librte_metrics/meson.build b/lib/librte_metrics/meson.build
index 28a8cc115..d5be6a214 100644
--- a/lib/librte_metrics/meson.build
+++ b/lib/librte_metrics/meson.build
@@ -1,14 +1,13 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
-sources = files('rte_metrics.c')
-headers = files('rte_metrics.h')
+sources = files('rte_metrics.c', 'rte_metrics_telemetry.c')
+headers = files('rte_metrics.h', 'rte_metrics_telemetry.h')
jansson = dependency('jansson', required: false, method: 'pkg-config')
if jansson.found()
+ dpdk_conf.set('RTE_HAS_JANSSON', 1)
ext_deps += jansson
- sources += files('rte_metrics_telemetry.c')
- headers += files('rte_metrics_telemetry.h')
- deps += ['ethdev', 'telemetry']
- includes += include_directories('../librte_telemetry')
endif
+
+deps += ['ethdev', 'telemetry']
diff --git a/lib/librte_metrics/rte_metrics_telemetry.c b/lib/librte_metrics/rte_metrics_telemetry.c
index b8ee56ef0..305ee271f 100644
--- a/lib/librte_metrics/rte_metrics_telemetry.c
+++ b/lib/librte_metrics/rte_metrics_telemetry.c
@@ -2,8 +2,6 @@
* Copyright(c) 2020 Intel Corporation
*/
-#include <jansson.h>
-
#include <rte_ethdev.h>
#include <rte_string_fns.h>
#ifdef RTE_LIB_TELEMETRY
@@ -13,6 +11,7 @@
#include "rte_metrics.h"
#include "rte_metrics_telemetry.h"
+#ifdef RTE_HAS_JANSSON
struct telemetry_metrics_data tel_met_data;
int metrics_log_level;
@@ -541,3 +540,60 @@ RTE_INIT(metrics_ctor)
handle_ports_stats_values_by_name);
#endif
}
+#else
+int32_t
+rte_metrics_tel_reg_all_ethdev(int *metrics_register_done, int *reg_index_list)
+{
+ RTE_SET_USED(metrics_register_done);
+ RTE_SET_USED(reg_index_list);
+
+ return -ENOTSUP;
+}
+
+int32_t
+rte_metrics_tel_encode_json_format(struct telemetry_encode_param *ep,
+ char **json_buffer)
+{
+ RTE_SET_USED(ep);
+ RTE_SET_USED(json_buffer);
+
+ return -ENOTSUP;
+}
+
+int32_t
+rte_metrics_tel_get_ports_stats_json(struct telemetry_encode_param *ep,
+ int *reg_index, char **json_buffer)
+{
+ RTE_SET_USED(ep);
+ RTE_SET_USED(reg_index);
+ RTE_SET_USED(json_buffer);
+
+ return -ENOTSUP;
+}
+
+int32_t
+rte_metrics_tel_get_port_stats_ids(struct telemetry_encode_param *ep)
+{
+ RTE_SET_USED(ep);
+
+ return -ENOTSUP;
+}
+
+int32_t
+rte_metrics_tel_extract_data(struct telemetry_encode_param *ep, json_t *data)
+{
+ RTE_SET_USED(ep);
+ RTE_SET_USED(data);
+
+ return -ENOTSUP;
+}
+
+int32_t
+rte_metrics_tel_get_global_stats(struct telemetry_encode_param *ep)
+{
+ RTE_SET_USED(ep);
+
+ return -ENOTSUP;
+}
+
+#endif
diff --git a/lib/librte_metrics/rte_metrics_telemetry.h b/lib/librte_metrics/rte_metrics_telemetry.h
index 5dbb32ca0..2b6eb1ccc 100644
--- a/lib/librte_metrics/rte_metrics_telemetry.h
+++ b/lib/librte_metrics/rte_metrics_telemetry.h
@@ -2,7 +2,7 @@
* Copyright(c) 2020 Intel Corporation
*/
-#ifdef RTE_LIB_TELEMETRY
+#ifdef RTE_HAS_JANSSON
#include <jansson.h>
#else
#define json_t void *
--
2.30.0.vfs.0.2
next prev parent reply other threads:[~2021-03-08 18:05 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-22 21:25 [dpdk-dev] [PATCH] rte_metrics: unconditionally export " Jie
2021-02-22 22:24 ` Dmitry Kozlyuk
2021-02-23 10:03 ` Bruce Richardson
2021-02-23 23:01 ` [dpdk-dev] [PATCH v2] rte_metrics: unconditionally exports " Jie Zhou
2021-02-24 10:36 ` Bruce Richardson
2021-02-24 18:46 ` [dpdk-dev] [PATCH v3] " Jie Zhou
2021-03-06 20:18 ` Dmitry Kozlyuk
2021-03-08 18:05 ` Jie Zhou [this message]
2021-03-16 9:07 ` [dpdk-dev] [PATCH v4] " Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1615226739-27419-1-git-send-email-jizh@linux.microsoft.com \
--to=jizh@linux.microsoft.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=dmitry.kozliuk@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).