DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Min Hu (Connor)" <humin29@huawei.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@intel.com>
Subject: [dpdk-dev] [PATCH v2 1/9] net/hns3: support runtime config to select IO burst func
Date: Wed, 10 Mar 2021 14:16:17 +0800	[thread overview]
Message-ID: <1615356985-24722-2-git-send-email-humin29@huawei.com> (raw)
In-Reply-To: <1615356985-24722-1-git-send-email-humin29@huawei.com>

From: Chengwen Feng <fengchengwen@huawei.com>

Currently, the driver support multiple IO burst function and auto
selection of the most appropriate function based on offload
configuration.

Most applications such as l2fwd/l3fwd don't provide the means to
change offload configuration, so it will use the auto selection's io
burst function.

This patch support runtime config to select io burst function, which
add two config: rx_func_hint and tx_func_hint, both could assign
vec/sve/simple/common.

The driver will use the following rules to select io burst func:
a. if hint equal vec and meet the vec Rx/Tx usage condition then use
the neon function.
b. if hint equal sve and meet the sve Rx/Tx usage condition then use
the sve function.
c. if hint equal simple and meet the simple Rx/Tx usage condition then
use the simple function.
d. if hint equal common then use the common function.
e. if hint not set then:
e.1. if meet the vec Rx/Tx usage condition then use the neon function.
e.2. if meet the simple Rx/Tx usage condition then use the simple
function.
e.3. else use the common function.

Note: the sve Rx/Tx usage condition based on the vec Rx/Tx usage
condition and runtime environment (which must support SVE).

In the previous versions, driver will preferred use the sve function
when meet the sve Rx/Tx usage condition, but in this case driver could
get better performance if use the neon function.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
---
 doc/guides/rel_notes/release_21_05.rst |  1 +
 drivers/net/hns3/hns3_ethdev.c         | 74 ++++++++++++++++++++++++++++++++++
 drivers/net/hns3/hns3_ethdev.h         | 12 ++++++
 drivers/net/hns3/hns3_ethdev_vf.c      |  1 +
 drivers/net/hns3/hns3_rxtx.c           | 54 ++++++++++++++++++-------
 5 files changed, 128 insertions(+), 14 deletions(-)

diff --git a/doc/guides/rel_notes/release_21_05.rst b/doc/guides/rel_notes/release_21_05.rst
index dc5399f..1d85942 100644
--- a/doc/guides/rel_notes/release_21_05.rst
+++ b/doc/guides/rel_notes/release_21_05.rst
@@ -60,6 +60,7 @@ New Features
   * Added support for module EEPROM dumping.
   * Added support for freeing Tx mbuf on demand.
   * Added support for copper port in Kunpeng930.
+  * Added support for runtime config to select IO burst function.
 
 * **Updated NXP DPAA2 driver.**
 
diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 9cbcc13..e921924 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -6,6 +6,7 @@
 #include <rte_bus_pci.h>
 #include <ethdev_pci.h>
 #include <rte_pci.h>
+#include <rte_kvargs.h>
 
 #include "hns3_ethdev.h"
 #include "hns3_logs.h"
@@ -6505,6 +6506,78 @@ hns3_get_module_info(struct rte_eth_dev *dev,
 	return 0;
 }
 
+static int
+hns3_parse_io_hint_func(const char *key, const char *value, void *extra_args)
+{
+	uint32_t hint = HNS3_IO_FUNC_HINT_NONE;
+
+	RTE_SET_USED(key);
+
+	if (strcmp(value, "vec") == 0)
+		hint = HNS3_IO_FUNC_HINT_VEC;
+	else if (strcmp(value, "sve") == 0)
+		hint = HNS3_IO_FUNC_HINT_SVE;
+	else if (strcmp(value, "simple") == 0)
+		hint = HNS3_IO_FUNC_HINT_SIMPLE;
+	else if (strcmp(value, "common") == 0)
+		hint = HNS3_IO_FUNC_HINT_COMMON;
+
+	/* If the hint is valid then update output parameters */
+	if (hint != HNS3_IO_FUNC_HINT_NONE)
+		*(uint32_t *)extra_args = hint;
+
+	return 0;
+}
+
+static const char *
+hns3_get_io_hint_func_name(uint32_t hint)
+{
+	switch (hint) {
+	case HNS3_IO_FUNC_HINT_VEC:
+		return "vec";
+	case HNS3_IO_FUNC_HINT_SVE:
+		return "sve";
+	case HNS3_IO_FUNC_HINT_SIMPLE:
+		return "simple";
+	case HNS3_IO_FUNC_HINT_COMMON:
+		return "common";
+	default:
+		return "none";
+	}
+}
+
+void
+hns3_parse_devargs(struct rte_eth_dev *dev)
+{
+	struct hns3_adapter *hns = dev->data->dev_private;
+	uint32_t rx_func_hint = HNS3_IO_FUNC_HINT_NONE;
+	uint32_t tx_func_hint = HNS3_IO_FUNC_HINT_NONE;
+	struct hns3_hw *hw = &hns->hw;
+	struct rte_kvargs *kvlist;
+
+	if (dev->device->devargs == NULL)
+		return;
+
+	kvlist = rte_kvargs_parse(dev->device->devargs->args, NULL);
+	if (!kvlist)
+		return;
+
+	rte_kvargs_process(kvlist, "rx_func_hint", &hns3_parse_io_hint_func,
+			   &rx_func_hint);
+	rte_kvargs_process(kvlist, "tx_func_hint", &hns3_parse_io_hint_func,
+			   &tx_func_hint);
+	rte_kvargs_free(kvlist);
+
+	if (rx_func_hint != HNS3_IO_FUNC_HINT_NONE)
+		hns3_warn(hw, "parsed rx_func_hint = %s.",
+			  hns3_get_io_hint_func_name(rx_func_hint));
+	hns->rx_func_hint = rx_func_hint;
+	if (tx_func_hint != HNS3_IO_FUNC_HINT_NONE)
+		hns3_warn(hw, "parsed tx_func_hint = %s.",
+			  hns3_get_io_hint_func_name(tx_func_hint));
+	hns->tx_func_hint = tx_func_hint;
+}
+
 static const struct eth_dev_ops hns3_eth_dev_ops = {
 	.dev_configure      = hns3_dev_configure,
 	.dev_start          = hns3_dev_start,
@@ -6625,6 +6698,7 @@ hns3_dev_init(struct rte_eth_dev *eth_dev)
 	hw->adapter_state = HNS3_NIC_UNINITIALIZED;
 	hns->is_vf = false;
 	hw->data = eth_dev->data;
+	hns3_parse_devargs(eth_dev);
 
 	/*
 	 * Set default max packet size according to the mtu
diff --git a/drivers/net/hns3/hns3_ethdev.h b/drivers/net/hns3/hns3_ethdev.h
index 932600d..173848a 100644
--- a/drivers/net/hns3/hns3_ethdev.h
+++ b/drivers/net/hns3/hns3_ethdev.h
@@ -772,9 +772,20 @@ struct hns3_adapter {
 	bool tx_simple_allowed;
 	bool tx_vec_allowed;
 
+	uint32_t rx_func_hint;
+	uint32_t tx_func_hint;
+
 	struct hns3_ptype_table ptype_tbl __rte_cache_min_aligned;
 };
 
+enum {
+	HNS3_IO_FUNC_HINT_NONE = 0,
+	HNS3_IO_FUNC_HINT_VEC,
+	HNS3_IO_FUNC_HINT_SVE,
+	HNS3_IO_FUNC_HINT_SIMPLE,
+	HNS3_IO_FUNC_HINT_COMMON
+};
+
 #define HNS3_DEV_SUPPORT_DCB_B			0x0
 #define HNS3_DEV_SUPPORT_COPPER_B		0x1
 #define HNS3_DEV_SUPPORT_UDP_GSO_B		0x2
@@ -975,6 +986,7 @@ int hns3_dev_infos_get(struct rte_eth_dev *eth_dev,
 		       struct rte_eth_dev_info *info);
 void hns3vf_update_link_status(struct hns3_hw *hw, uint8_t link_status,
 			  uint32_t link_speed, uint8_t link_duplex);
+void hns3_parse_devargs(struct rte_eth_dev *dev);
 
 static inline bool
 is_reset_pending(struct hns3_adapter *hns)
diff --git a/drivers/net/hns3/hns3_ethdev_vf.c b/drivers/net/hns3/hns3_ethdev_vf.c
index fd20c52..5dd17c2 100644
--- a/drivers/net/hns3/hns3_ethdev_vf.c
+++ b/drivers/net/hns3/hns3_ethdev_vf.c
@@ -2834,6 +2834,7 @@ hns3vf_dev_init(struct rte_eth_dev *eth_dev)
 	hw->adapter_state = HNS3_NIC_UNINITIALIZED;
 	hns->is_vf = true;
 	hw->data = eth_dev->data;
+	hns3_parse_devargs(eth_dev);
 
 	ret = hns3_reset_init(hw);
 	if (ret)
diff --git a/drivers/net/hns3/hns3_rxtx.c b/drivers/net/hns3/hns3_rxtx.c
index 00167c4..f5c7d71 100644
--- a/drivers/net/hns3/hns3_rxtx.c
+++ b/drivers/net/hns3/hns3_rxtx.c
@@ -2689,13 +2689,26 @@ hns3_get_rx_function(struct rte_eth_dev *dev)
 {
 	struct hns3_adapter *hns = dev->data->dev_private;
 	uint64_t offloads = dev->data->dev_conf.rxmode.offloads;
+	bool vec_allowed, sve_allowed, simple_allowed;
+
+	vec_allowed = hns->rx_vec_allowed &&
+		      hns3_rx_check_vec_support(dev) == 0;
+	sve_allowed = vec_allowed && hns3_check_sve_support();
+	simple_allowed = hns->rx_simple_allowed && !dev->data->scattered_rx &&
+			 (offloads & DEV_RX_OFFLOAD_TCP_LRO) == 0;
+
+	if (hns->rx_func_hint == HNS3_IO_FUNC_HINT_VEC && vec_allowed)
+		return hns3_recv_pkts_vec;
+	if (hns->rx_func_hint == HNS3_IO_FUNC_HINT_SVE && sve_allowed)
+		return hns3_recv_pkts_vec_sve;
+	if (hns->rx_func_hint == HNS3_IO_FUNC_HINT_SIMPLE && simple_allowed)
+		return hns3_recv_pkts;
+	if (hns->rx_func_hint == HNS3_IO_FUNC_HINT_COMMON)
+		return hns3_recv_scattered_pkts;
 
-	if (hns->rx_vec_allowed && hns3_rx_check_vec_support(dev) == 0)
-		return hns3_check_sve_support() ? hns3_recv_pkts_vec_sve :
-		       hns3_recv_pkts_vec;
-
-	if (hns->rx_simple_allowed && !dev->data->scattered_rx &&
-	    (offloads & DEV_RX_OFFLOAD_TCP_LRO) == 0)
+	if (vec_allowed)
+		return hns3_recv_pkts_vec;
+	if (simple_allowed)
 		return hns3_recv_pkts;
 
 	return hns3_recv_scattered_pkts;
@@ -3930,19 +3943,32 @@ hns3_get_tx_function(struct rte_eth_dev *dev, eth_tx_prep_t *prep)
 {
 	uint64_t offloads = dev->data->dev_conf.txmode.offloads;
 	struct hns3_adapter *hns = dev->data->dev_private;
+	bool vec_allowed, sve_allowed, simple_allowed;
 
-	if (hns->tx_vec_allowed && hns3_tx_check_vec_support(dev) == 0) {
-		*prep = NULL;
-		return hns3_check_sve_support() ? hns3_xmit_pkts_vec_sve :
-			hns3_xmit_pkts_vec;
-	}
+	vec_allowed = hns->tx_vec_allowed &&
+		      hns3_tx_check_vec_support(dev) == 0;
+	sve_allowed = vec_allowed && hns3_check_sve_support();
+	simple_allowed = hns->tx_simple_allowed &&
+			 offloads == (offloads & DEV_TX_OFFLOAD_MBUF_FAST_FREE);
 
-	if (hns->tx_simple_allowed &&
-	    offloads == (offloads & DEV_TX_OFFLOAD_MBUF_FAST_FREE)) {
-		*prep = NULL;
+	*prep = NULL;
+
+	if (hns->tx_func_hint == HNS3_IO_FUNC_HINT_VEC && vec_allowed)
+		return hns3_xmit_pkts_vec;
+	if (hns->tx_func_hint == HNS3_IO_FUNC_HINT_SVE && sve_allowed)
+		return hns3_xmit_pkts_vec_sve;
+	if (hns->tx_func_hint == HNS3_IO_FUNC_HINT_SIMPLE && simple_allowed)
 		return hns3_xmit_pkts_simple;
+	if (hns->tx_func_hint == HNS3_IO_FUNC_HINT_COMMON) {
+		*prep = hns3_prep_pkts;
+		return hns3_xmit_pkts;
 	}
 
+	if (vec_allowed)
+		return hns3_xmit_pkts_vec;
+	if (simple_allowed)
+		return hns3_xmit_pkts_simple;
+
 	*prep = hns3_prep_pkts;
 	return hns3_xmit_pkts;
 }
-- 
2.7.4


  reply	other threads:[~2021-03-10  6:15 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-10  6:16 [dpdk-dev] [PATCH v2 0/9] features and bugfixes for hns3 Min Hu (Connor)
2021-03-10  6:16 ` Min Hu (Connor) [this message]
2021-03-11 17:31   ` [dpdk-dev] [PATCH v2 1/9] net/hns3: support runtime config to select IO burst func Ferruh Yigit
2021-03-12  0:59     ` Min Hu (Connor)
2021-03-11 17:39   ` Ferruh Yigit
2021-03-12  1:01     ` Min Hu (Connor)
2021-03-10  6:16 ` [dpdk-dev] [PATCH v2 2/9] net/hns3: support Tx push quick doorbell to improve perf Min Hu (Connor)
2021-03-11 18:05   ` Ferruh Yigit
2021-03-12 11:02     ` Min Hu (Connor)
2021-03-10  6:16 ` [dpdk-dev] [PATCH v2 3/9] net/hns3: support for outer UDP cksum Min Hu (Connor)
2021-03-10  6:16 ` [dpdk-dev] [PATCH v2 4/9] net/hns3: adjust the format of RAS related structures Min Hu (Connor)
2021-03-11 18:25   ` Ferruh Yigit
2021-03-12  1:51     ` Min Hu (Connor)
2021-03-12 10:02       ` Ferruh Yigit
2021-03-12 10:51         ` Min Hu (Connor)
2021-03-16 11:32           ` Min Hu (Connor)
2021-03-10  6:16 ` [dpdk-dev] [PATCH v2 5/9] net/hns3: delete redundant xstats RAS statistics Min Hu (Connor)
2021-03-10  6:16 ` [dpdk-dev] [PATCH v2 6/9] net/hns3: support imissed stats for PF/VF Min Hu (Connor)
2021-03-10  6:16 ` [dpdk-dev] [PATCH v2 7/9] net/hns3: support oerrors stats in PF Min Hu (Connor)
2021-03-10  6:16 ` [dpdk-dev] [PATCH v2 8/9] net/hns3: support query Tx descriptor status Min Hu (Connor)
2021-03-10  6:16 ` [dpdk-dev] [PATCH v2 9/9] net/hns3: support query Rx " Min Hu (Connor)
2021-03-12 11:51 ` [dpdk-dev] [PATCH v3 0/8] features and bugfixes for hns3 Min Hu (Connor)
2021-03-12 11:51   ` [dpdk-dev] [PATCH v3 1/8] net/hns3: support runtime config to select IO burst func Min Hu (Connor)
2021-03-16 12:40     ` Ferruh Yigit
2021-03-17  1:14       ` Min Hu (Connor)
2021-03-17 15:28         ` Ferruh Yigit
2021-03-19  1:08           ` Min Hu (Connor)
2021-03-12 11:51   ` [dpdk-dev] [PATCH v3 2/8] net/hns3: support for outer UDP cksum Min Hu (Connor)
2021-03-12 11:51   ` [dpdk-dev] [PATCH v3 3/8] net/hns3: adjust the format of RAS related structures Min Hu (Connor)
2021-03-12 11:51   ` [dpdk-dev] [PATCH v3 4/8] net/hns3: delete redundant xstats RAS statistics Min Hu (Connor)
2021-03-12 11:51   ` [dpdk-dev] [PATCH v3 5/8] net/hns3: support imissed stats for PF/VF Min Hu (Connor)
2021-03-12 11:51   ` [dpdk-dev] [PATCH v3 6/8] net/hns3: support oerrors stats in PF Min Hu (Connor)
2021-03-12 11:51   ` [dpdk-dev] [PATCH v3 7/8] net/hns3: support query Tx descriptor status Min Hu (Connor)
2021-03-12 11:51   ` [dpdk-dev] [PATCH v3 8/8] net/hns3: support query Rx " Min Hu (Connor)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1615356985-24722-2-git-send-email-humin29@huawei.com \
    --to=humin29@huawei.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).