[dpdk-dev] [PATCH 6/6] net/hns3: fix the long taskqueue pairs reset time

["Min Hu (Connor)" <humin29@huawei.com>]

From: Chengchang Tang <tangchengchang@huawei.com>

Currently, the queue reset process needs to be performed one by one, which
is inefficient. However, the queues reset in the same function is almost at
the same stage. To optimize the queue reset process, a new function has
been added to the firmware command HNS3_OPC_CFG_RST_TRIGGER to reset all
queues in the same function at a time. And the related queue reset MBX
message is adjusted in the same way too.

Fixes: bba636698316 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org

Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
---
 drivers/net/hns3/hns3_cmd.h  |   8 ++-
 drivers/net/hns3/hns3_rxtx.c | 125 ++++++++++++++++++++++++++++++++++++-------
 2 files changed, 114 insertions(+), 19 deletions(-)

diff --git a/drivers/net/hns3/hns3_cmd.h b/drivers/net/hns3/hns3_cmd.h
index 939bbc2..2e911ef 100644
--- a/drivers/net/hns3/hns3_cmd.h
+++ b/drivers/net/hns3/hns3_cmd.h
@@ -933,10 +933,16 @@ struct hns3_reset_tqp_queue_cmd {
 
 #define HNS3_CFG_RESET_MAC_B		3
 #define HNS3_CFG_RESET_FUNC_B		7
+#define HNS3_CFG_RESET_RCB_B		1
 struct hns3_reset_cmd {
 	uint8_t mac_func_reset;
 	uint8_t fun_reset_vfid;
-	uint8_t rsv[22];
+	uint8_t fun_reset_rcb;
+	uint8_t rsv1;
+	uint16_t fun_reset_rcb_vqid_start;
+	uint16_t fun_reset_rcb_vqid_num;
+	uint8_t fun_reset_rcb_return_status;
+	uint8_t rsv2[15];
 };
 
 #define HNS3_QUERY_DEV_SPECS_BD_NUM		4
diff --git a/drivers/net/hns3/hns3_rxtx.c b/drivers/net/hns3/hns3_rxtx.c
index 3d7e831..a6722d3 100644
--- a/drivers/net/hns3/hns3_rxtx.c
+++ b/drivers/net/hns3/hns3_rxtx.c
@@ -629,10 +629,6 @@ hns3pf_reset_tqp(struct hns3_hw *hw, uint16_t queue_id)
 	uint64_t end;
 	int ret;
 
-	ret = hns3_tqp_enable(hw, queue_id, false);
-	if (ret)
-		return ret;
-
 	/*
 	 * In current version VF is not supported when PF is driven by DPDK
 	 * driver, all task queue pairs are mapped to PF function, so PF's queue
@@ -679,11 +675,6 @@ hns3vf_reset_tqp(struct hns3_hw *hw, uint16_t queue_id)
 	uint8_t msg_data[2];
 	int ret;
 
-	/* Disable VF's queue before send queue reset msg to PF */
-	ret = hns3_tqp_enable(hw, queue_id, false);
-	if (ret)
-		return ret;
-
 	memcpy(msg_data, &queue_id, sizeof(uint16_t));
 
 	ret = hns3_send_mbx_msg(hw, HNS3_MBX_QUEUE_RESET, 0, msg_data,
@@ -695,14 +686,105 @@ hns3vf_reset_tqp(struct hns3_hw *hw, uint16_t queue_id)
 }
 
 static int
-hns3_reset_tqp(struct hns3_adapter *hns, uint16_t queue_id)
+hns3_reset_rcb_cmd(struct hns3_hw *hw, uint8_t *reset_status)
 {
-	struct hns3_hw *hw = &hns->hw;
+	struct hns3_reset_cmd *req;
+	struct hns3_cmd_desc desc;
+	int ret;
 
-	if (hns->is_vf)
-		return hns3vf_reset_tqp(hw, queue_id);
-	else
-		return hns3pf_reset_tqp(hw, queue_id);
+	hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_CFG_RST_TRIGGER, false);
+	req = (struct hns3_reset_cmd *)desc.data;
+	hns3_set_bit(req->mac_func_reset, HNS3_CFG_RESET_RCB_B, 1);
+
+	/*
+	 * The start qid should be the global qid of the first tqp of the
+	 * function which should be reset in this port. Since our PF not
+	 * support take over of VFs, so we only need to reset function 0,
+	 * and its start qid is always 0.
+	 */
+	req->fun_reset_rcb_vqid_start = rte_cpu_to_le_16(0);
+	req->fun_reset_rcb_vqid_num = rte_cpu_to_le_16(hw->cfg_max_queues);
+
+	ret = hns3_cmd_send(hw, &desc, 1);
+	if (ret) {
+		hns3_err(hw, "fail to send rcb reset cmd, ret = %d.", ret);
+		return ret;
+	}
+
+	*reset_status = req->fun_reset_rcb_return_status;
+	return 0;
+}
+
+static int
+hns3pf_reset_all_tqps(struct hns3_hw *hw)
+{
+#define HNS3_RESET_RCB_NOT_SUPPORT	0U
+#define HNS3_RESET_ALL_TQP_SUCCESS	1U
+	uint8_t reset_status;
+	int ret;
+	int i;
+
+	ret = hns3_reset_rcb_cmd(hw, &reset_status);
+	if (ret)
+		return ret;
+
+	/*
+	 * If the firmware version is low, it may not support the rcb reset
+	 * which means reset all the tqps at a time. In this case, we should
+	 * reset tqps one by one.
+	 */
+	if (reset_status == HNS3_RESET_RCB_NOT_SUPPORT) {
+		for (i = 0; i < hw->cfg_max_queues; i++) {
+			ret = hns3pf_reset_tqp(hw, i);
+			if (ret) {
+				hns3_err(hw,
+				  "fail to reset tqp, queue_id = %d, ret = %d.",
+				  i, ret);
+				return ret;
+			}
+		}
+	} else if (reset_status != HNS3_RESET_ALL_TQP_SUCCESS) {
+		hns3_err(hw, "fail to reset all tqps, reset_status = %u.",
+				reset_status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int
+hns3vf_reset_all_tqps(struct hns3_hw *hw)
+{
+#define HNS3VF_RESET_ALL_TQP_DONE	1U
+	uint8_t reset_status;
+	uint8_t msg_data[2];
+	int ret;
+	int i;
+
+	memset(msg_data, 0, sizeof(uint16_t));
+	ret = hns3_send_mbx_msg(hw, HNS3_MBX_QUEUE_RESET, 0, msg_data,
+				sizeof(msg_data), true, &reset_status,
+				sizeof(reset_status));
+	if (ret) {
+		hns3_err(hw, "fail to send rcb reset mbx, ret = %d.", ret);
+		return ret;
+	}
+
+	if (reset_status == HNS3VF_RESET_ALL_TQP_DONE)
+		return 0;
+
+	/*
+	 * If the firmware version or kernel PF version is low, it may not
+	 * support the rcb reset which means reset all the tqps at a time.
+	 * In this case, we should reset tqps one by one.
+	 */
+	for (i = 1; i < hw->cfg_max_queues; i++) {
+		ret = hns3vf_reset_tqp(hw, i);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 int
@@ -711,14 +793,21 @@ hns3_reset_all_tqps(struct hns3_adapter *hns)
 	struct hns3_hw *hw = &hns->hw;
 	int ret, i;
 
+	/* Disable all queues before reset all queues */
 	for (i = 0; i < hw->cfg_max_queues; i++) {
-		ret = hns3_reset_tqp(hns, i);
+		ret = hns3_tqp_enable(hw, i, false);
 		if (ret) {
-			hns3_err(hw, "Failed to reset No.%d queue: %d", i, ret);
+			hns3_err(hw,
+			    "fail to disable tqps before tqps reset, ret = %d.",
+			    ret);
 			return ret;
 		}
 	}
-	return 0;
+
+	if (hns->is_vf)
+		return hns3vf_reset_all_tqps(hw);
+	else
+		return hns3pf_reset_all_tqps(hw);
 }
 
 static int
-- 
2.7.4